ive been using Qbond for years , originally I used it for RC car repairs... then a cracked motorcycle oil pan.. and two years ago.. high pressure AC line on a Y split front/rear Ac junction.. and its still holding !! .. tip , cleaner the better and make layers ..
Grip Edge liked a photo I posted on their facebook site.Asked me if I allowed them to use it and told them yes.Tub O' Towels is all I use for cleaning wipes
The grip edge stuff looks great, always makes me wonder how the other companies will keep up with their hex, torx, TS etc when the RPT stuff is so good
Grip Edge's long torx's bit set isn't the most comprehensive on the market. The Quinn Master Set from Harbor Freight has exactly the same long bits but comes with A LOT more in the set. The TopDon - inflator and jump pack is BRILLIANT!! I don't understand why more companies haven't done this already.
That juice box is a cool deal. Vim boys doing vim stuff , can’t wait to pick up their stuff. Qbond looks really cool. Love me some tubby towels. Glad that guy stayed home, probably his best decision yet.
Hey @mrsubaru1387. Not sure where else to turn so I’ll send my question your way…. I have a 2010 Fotester w only 157k. When driving in the heat (20C) 3 warning lights pop up on my dash (AT TEMP, traction control, and ABS) and my transmission feels off (shifts at different RPMS). This doesn’t happen ever time I drive? So thinking a sensor or something? Will be taking it to the shop this week, but thought I’d throw it at you to see if you have seen it before?? Thanks for all your great content!
Thanks for the video coverage of ISN. Is this show open to the public? I would love to go in the future. I'm super excited about that Sunex Power Box and the Tub-O lubricant spray.
@SUNEXTools77 I took advantage of Prime Day and ordered the full line of impact/universal socket master sets (1/4, 3/8, and 1,2). Need your cart to put them all in!
*GREAT* media product here. Should add right now current for USA now today *"WE DELIVER NOW"* as if they can't do that no need to part with your work flow.
If you ever buy Wiha tools and look at the back of the package were they are distributed out of It will say Monticello Minnesota that is there only us distribution center for the entire USA in my home town you want a tool from them just walk in and get it so cool how a big company has a walk in store which has every tool that they make in one spot and only store that has all of their tools in one place for the Entirety of the US I have almost all of there tools and love them all I would say if I had to buy all new pliers I would go with them due to their easy warranty claim process and vary good quality and value for the price
Definitely some interesting stuff hitting the market. Thank you for the video! Considering on grabbing some more VIM stuff for sure. Oh also MRSubaru if you see this. Are XFRRM705 set you posted up awhile back worth it? They are quite a bit pricey but my Mountain set has seen better days. Any input on it is greatly appreciated!
Hello and greetings from northeast Tennessee! New to the channel here. May I ask a question please- looking to buy an 09 outback with the 3.0r engine. 250,000 miles on it . Few seemingly minor oil leaks runs pretty smoothly ( former auto mechanic still doing my own repairs as well as lots of other equipment so not a green thumb but not an expert either) Is this a good engine or should I stay away from it. I watched a video where you mentioned the PCV valve and I absolutely agree and yes will definitely replace it . If you didn’t mention it I’m pretty sure I would have overlooked it) Got tune up parts was going to do the 5w-30 synthetic oil. Plugs fuel/ air filter valve covers ( leaking) Any advice would be greatly appreciated! Thanks man!
I love the gripedge/mac RBRT tools. They slick. But the price difference is pretty minimal. Mac 121 pc set is 299 and the gripedge 132 pc set is 249. Sure you get a few more pieces but there would be a dramatic price difference in not having the MAC logo on it. The hex bit sockets arent as complete as they could be and still asking 99-160 depending on the set. Does anyone else feel like gripedge tools are slightly overpriced?
Oh, and stop fighting with that guy here on RUclips. He's just dragging you down to his level. A long time ago I had a guy attacking me here on RUclips for posts that I was making on an online forum. I ignored him and he went away.
best newbie advise....mechanic, woodworker, any crafter.....NEVER buy sets of anything. If you buy a set of 16 drill bits, 4-5 will get used heavily and the rest will be orphan bits. Just buy one at a time as you need them. drill bits, router bits, wrenches, sockets, lathe blades, chisels, anything that sells in sets. One is at a higher unit price but it is only ONE. You'll pay much less over time than buying sets. And you end up with the tools you use and no orphans.
I know a South African accent as soon as I hear it.. love it that we can hear it all the way somewhere in USA.
Love seeing the tools old and new on the channel
ive been using Qbond for years , originally I used it for RC car repairs... then a cracked motorcycle oil pan.. and two years ago.. high pressure AC line on a Y split front/rear Ac junction.. and its still holding !! .. tip , cleaner the better and make layers ..
The way Qbond smokes, it looks like the reaction between super glue and baking soda
Sounds like something good to have in the bush
Grip Edge liked a photo I posted on their facebook site.Asked me if I allowed them to use it and told them yes.Tub O' Towels is all I use for cleaning wipes
Nice!!
the bit set!!!!! its a must!
That sunex cart looks nice. Wish they had it with a split slide top.
Great to meet you at the Expo. Love the videos.
130 pc bit set is nice
I was falling asleep, until I saw Vim tools. That’s the kind of innovation we’ve been waiting for.
LOL @ me walking down the row in the first grip edge clip 😂
Just an FYI everyone Cornwell tools has the Gripedge Maste4 Kit on sale right now for $100 off!
Did your buddy run off when he saw you? 😂 i hope so.
Seems he didn’t show up, at all. 👀
@@MrSubaru1387 he's scared lol
@@MrSubaru1387he probably read all the comments on your video and got scared
Those milwaukee d/a's!!! 👌👏👏👏
Luis got that hair slicked all the way back!!!
The mans hair on 12:30 is on POINT bro 🔥
The grip edge stuff looks great, always makes me wonder how the other companies will keep up with their hex, torx, TS etc when the RPT stuff is so good
Grip Edge's long torx's bit set isn't the most comprehensive on the market. The Quinn Master Set from Harbor Freight has exactly the same long bits but comes with A LOT more in the set.
The TopDon - inflator and jump pack is BRILLIANT!! I don't understand why more companies haven't done this already.
That juice box is a cool deal. Vim boys doing vim stuff , can’t wait to pick up their stuff. Qbond looks really cool. Love me some tubby towels. Glad that guy stayed home, probably his best decision yet.
That meeter looks pretty sweet. Save me from having to check out a separate bonding meeter
Dan is a salesman
He knows his stuff for real!
Japan makes stuff like the Nora and The magnet holder looks exactly like The ktc one
Nice work.......
Thanks!
15:40 so.. Cubon.... Is super glue and baking soda peeps.. If you mix super glue with styrofoam itll turn into god tier puddy
VIM has two things wouldn’t mind having
Good show
Yes it was! Had a great time!
The power probe ev meter is as neat as the guy's power probe shirt i thought it was pretty cool looking
I love VIM Tools!!!
I made a video I’ve yet to post on the Grip Edge RPT sockets, they’re the best ones I’ve used for a rounded off bolt yet.
Mr. Subaru do you have a video explaining how you got involved with Subaru? I think that would be an interesting story. Thanks
LET'S GOOOOOO
I need that top don for flashing vehicles
I know grip is the manufacturer of the mac rbrt tools. I'd buy the mac brand bc of the warranty ease
Meme tool competition is fierce.
Qbond is interesting. 1st time im hearing about it.
Hey @mrsubaru1387. Not sure where else to turn so I’ll send my question your way….
I have a 2010 Fotester w only 157k. When driving in the heat (20C) 3 warning lights pop up on my dash (AT TEMP, traction control, and ABS) and my transmission feels off (shifts at different RPMS).
This doesn’t happen ever time I drive? So thinking a sensor or something? Will be taking it to the shop this week, but thought I’d throw it at you to see if you have seen it before??
Thanks for all your great content!
Thanks for the video coverage of ISN. Is this show open to the public? I would love to go in the future. I'm super excited about that Sunex Power Box and the Tub-O lubricant spray.
It’s for dealers, vendors, and media only I’m afraid.
@@MrSubaru1387damn. I'll be your +1 if you want company next year lol
So glad to hear you like the new JUIC'D Box 7 Drawer Powered Cart!
@SUNEXTools77 I took advantage of Prime Day and ordered the full line of impact/universal socket master sets (1/4, 3/8, and 1,2). Need your cart to put them all in!
@@joruckus Nice work taking advantage of some incredible pricing!
Vim tools stand looks really interesting
*GREAT* media product here. Should add right now current for USA now today *"WE DELIVER NOW"* as if they can't do that no need to part with your work flow.
If you ever buy Wiha tools and look at the back of the package were they are distributed out of It will say Monticello Minnesota that is there only us distribution center for the entire USA in my home town you want a tool from them just walk in and get it so cool how a big company has a walk in store which has every tool that they make in one spot and only store that has all of their tools in one place for the Entirety of the US I have almost all of there tools and love them all I would say if I had to buy all new pliers I would go with them due to their easy warranty claim process and vary good quality and value for the price
I want their bit set
Can you do a cam carrier re-seal video? Need to do it myself but I’ve been holding off. I can’t afford to pay a mechanic to do it.
How do you get stubborn engines and transmissions separated?
Any tips? Are there any special tools for this task?
Big prybar and a prayer
Chisel to open a gap, then prybar down each side. Alignment dowels seize.
@@MrSubaru1387 I have an idea for a tool. I just used it to remove an engine from a '12 Forester.
No hammering, or prying. Interested? 🤔
I had a question do you know who makes the Mac tools SD60KL?
Can’t wait for those mayhew master bit sets 😮will there be sae hex?
Not sure, but would assume so.
Definitely some interesting stuff hitting the market. Thank you for the video! Considering on grabbing some more VIM stuff for sure. Oh also MRSubaru if you see this. Are XFRRM705 set you posted up awhile back worth it? They are quite a bit pricey but my Mountain set has seen better days. Any input on it is greatly appreciated!
Honestly the Kabo sets are great for the money. No real advantage to the Snappy set other than made in USA and service ease.
@@MrSubaru1387 Gotcha! Thank you for the reply!
What is the run time on those Milwaukee sanders? And they didn’t sound that powerful
Little late to the video but when is the e-torx set coming out does anyone know
Hi Please would you add the Power Probe INT 500 to the official site on RUclips as the quality of the official video is not the best to be polite 😂
Hello and greetings from northeast Tennessee! New to the channel here. May I ask a question please- looking to buy an 09 outback with the 3.0r engine. 250,000 miles on it . Few seemingly minor oil leaks runs pretty smoothly ( former auto mechanic still doing my own repairs as well as lots of other equipment so not a green thumb but not an expert either)
Is this a good engine or should I stay away from it.
I watched a video where you mentioned the PCV valve and I absolutely agree and yes will definitely replace it . If you didn’t mention it I’m pretty sure I would have overlooked it)
Got tune up parts was going to do the 5w-30 synthetic oil. Plugs fuel/ air filter valve covers ( leaking)
Any advice would be greatly appreciated! Thanks man!
I love the gripedge/mac RBRT tools. They slick. But the price difference is pretty minimal. Mac 121 pc set is 299 and the gripedge 132 pc set is 249. Sure you get a few more pieces but there would be a dramatic price difference in not having the MAC logo on it.
The hex bit sockets arent as complete as they could be and still asking 99-160 depending on the set.
Does anyone else feel like gripedge tools are slightly overpriced?
@mrsubaru how are you? I need your opinion. My forester 2015sj won't start in one click but it will start on the second click.
Sounds like a starter
Will you sell rebuild kits for those of us that choose to give it the beans?
What kind of lube do you recommend for Koken ratchets?
I use a light oil in them. Seems like grease, like super lube, was too thick and affected backdrag and operation.
@@MrSubaru1387 Thanks, I got a new Koken ratchet & was reluctant to use super lube so I used a couple drops of 3 in 1. Smoothed it out a lot!
Wait are they selling you the old stile m12 batteries with the DA or the new versions 🤔??
DA coming with the new HO 2.5/5.0 M12 batteries.
Do any of those Torx sets have a T20+ in them?
Pretty sure most did.
Ohh damn, Dan isn’t with Mac any longer?
Where do they hold these exhibitions?
Oh, and stop fighting with that guy here on RUclips. He's just dragging you down to his level. A long time ago I had a guy attacking me here on RUclips for posts that I was making on an online forum. I ignored him and he went away.
Are those mayhew sets made in the USA?
The bits are USA made, sockets are not.
Came here for the confrontation with JDTco.
He didn’t show up. Sent his daughter instead.
Wiha mobile mechanic set looks like absolute child’s play lmao
I didn’t see jdtco there hmm 🤣
Nope! 👀 not sure anyone saw him either this weekend… 🤣😂🤣😂
@@MrSubaru1387 ahhh man 🤣🤣 really wanted to see the reunion
Wasn't he the RBRT guy aswell?
So Dan isn't the RBRT man anymore then.....
🫣creepin in da back #techschoice 💪
🤣😂😂😂 till Connor grabbed ya.
@@MrSubaru1387 😂😂 good times
best newbie advise....mechanic, woodworker, any crafter.....NEVER buy sets of anything. If you buy a set of 16 drill bits, 4-5 will get used heavily and the rest will be orphan bits. Just buy one at a time as you need them. drill bits, router bits, wrenches, sockets, lathe blades, chisels, anything that sells in sets. One is at a higher unit price but it is only ONE. You'll pay much less over time than buying sets. And you end up with the tools you use and no orphans.
The Gripedge guy could sell sand to arabs.
Did you get to catch up with old mate? The flog with a big mouth and his own RUclips channel
Seems someone didn’t show up… 👀
@@MrSubaru1387 I'm shocked
12th from mount airy 🫣