I especially love the garage door lights which only work when doors are open. Because everyone loves doing garage activities while the neighbors look on and the weather whips in. How much are LED strips, again?
Most of the prices are hilariously high, but I still love watching these to give me fabrication ideas for DIY clones. A reasonable one is the parking protectors. I've nearly lost both mirrors without them over decades. I recently bought a Vevor retractable air hose reel which I truly love. $68. Maybe the ret ext cord is next. The only high-but-reasonable price is $7,400 for the UL-300 lift and frame repair bench, which will pay for itself. Any skateboard could be used to lift a car or truck wheel, saving $150. One can make a morphable creeper, wrench extender, wheel roller, for pennies on the dollar.
Welcome to the first world. Please watch your orientation video (Idiocracy) and then report to your local government facility to receive a towel and a pat on the back before you released into the wild and left on your own.
Seems like everybody is just stealing inventions from the past, in every video I see at least 2 inventions that I saw my grandfather use and were passed down to me. Such as the wrench lengthening devise in this video so far.
@sneezinhatch yeah, my grandad owned a tire shop, he had two of those. Those went to my cousins, I got some of his other tools. I would like to buy one but only get glimpses at estate sells.
7:09 Waste of money. just use your foot. Roll the tire off-center to the hub, put your foot down, roll the tire onto your foot. It's not rocket science.
Not only that, but pretty sure disconnecting your radiator just to flush it out with a compressor powered water hose attachment isn't the greatest thing, either. Feel like you'd risk airlocking the coolant loop if everything isn't properly flushed and refilled....
ul-300 is how many thousands too much?? its the 1st thing that seems useful. then the next 3t but its not lifting the whole thing... i can lift a 5 tone car, on 1 corner only, just like this junk
I especially love the garage door lights which only work when doors are open. Because everyone loves doing garage activities while the neighbors look on and the weather whips in. How much are LED strips, again?
Most of the prices are hilariously high, but I still love watching these to give me fabrication ideas for DIY clones.
A reasonable one is the parking protectors. I've nearly lost both mirrors without them over decades.
I recently bought a Vevor retractable air hose reel which I truly love. $68. Maybe the ret ext cord is next.
The only high-but-reasonable price is $7,400 for the UL-300 lift and frame repair bench, which will pay for itself.
Any skateboard could be used to lift a car or truck wheel, saving $150.
One can make a morphable creeper, wrench extender, wheel roller, for pennies on the dollar.
Who puts a funnel in the glovebox, the marketing people at Ryco are geniuses😂
A lot of these are solutions to problems that don’t exist!
Welcome to the first world.
Please watch your orientation video (Idiocracy) and then report to your local government facility to receive a towel and a pat on the back before you released into the wild and left on your own.
Wow, lots of solutions to non-problems. First tool = another box end wrench.
Thanks for also giving measurements in Freedom Units.
Wow - getting rid of cars really makes my life much simpler. Also got rid of house.
The Trac is a good idea but, $150 +tax USD is hilarious, I'm off to the workshop to make it myself!
Or just use a crowbar
Or use a skateboard.
Title should read “25 COOL AND SUPER EXPENSIVE INVENTIONS AND TOOLS FOR YOUR GARAGE.”
😂
Wow! And to think I never even knew I needed any of that. My life is now cast into a whirl of hopelessness.
$250 for a vaccuum that dont even suck hard!
I’ve had one of those wrench extenders for years, they’re great.
You can use a pipe for 10 bucks or less to get leverage u need.
Or use another wrench… who ‘hammers’ on their wrenches anyhow?
or put another box end into the original wrenches open end.
Seems like everybody is just stealing inventions from the past, in every video I see at least 2 inventions that I saw my grandfather use and were passed down to me. Such as the wrench lengthening devise in this video so far.
Yep! Nearly all that stuff is a case of reinventing the wheel, again! LOL
I still use my 2 air jacks that look like a utility dolly with long arms each can lift 8k
@sneezinhatch yeah, my grandad owned a tire shop, he had two of those. Those went to my cousins, I got some of his other tools. I would like to buy one but only get glimpses at estate sells.
Or.... you can just use a second, larger wrench to do the same thing
@ryanc3219 I personally like my 24 inch 2 inch pipe. I just have a bunch of tools from the 40s and 50s my grandfather left me.
That 240Z though!
$625 for the Ergochair..... I'll keep using layers of cardboard on the ground thanks ;) Who needs comfort when you're working on a car...lol
I'm amused every time he says "garerage"
WTF?
Why are they all so incredibly expensive. Those prices can’t be correct.
I use the Brake Fluid tester every 6 months to test all my cars - works well.
I just test my brakes every time I drive
Aussie channel or just a Super Cheap Auto Sponcership?
1:35 Wait, so Slime invented the compressor/inflator combo? Man, are they ever missing out on some royalties!
7:09 Waste of money. just use your foot. Roll the tire off-center to the hub, put your foot down, roll the tire onto your foot. It's not rocket science.
Is this American dollars or Canadian as everything is reported in metric measurements?
Everything was cool in the video, but the prices are way out of line.
Thank Biden
Insects don’t get inside a vehicles radiator.
Not only that, but pretty sure disconnecting your radiator just to flush it out with a compressor powered water hose attachment isn't the greatest thing, either. Feel like you'd risk airlocking the coolant loop if everything isn't properly flushed and refilled....
Thank you
A wrench isn't designed to be used with an extender.
11:55 , lifted land cruiser ??
Are your prices US$ or Australian$?
Hello, I haven't received your programs automatically for a while👍
Low voltage doesn't mean cheap to run 10w is 10w @ 12v or @ 120v or even @ 240v meanig regardless of voltage it would cost the same to operate
Trac Tire Jack is $150? No way.
I think the ramps at 3:22 you said the less parts the better. There is another saying "KISS - Keep it simple stupid"
Wrench extender $40? Just use a metal pipe….suckers!
10:39 song?
Car guys already have this stuff covered. Nobody mechanically inclined would buy this junk.
Those ramps damn near tipped forward! Horrible design!!
3:41 Is that for blind people?
No, it's for people who don't know how to drive.
I had the Iroda solder pro and it didnt even last 4 solders and the sticker stop working
i just saw one continuous ad, where was content
TY T.Z first
lool tell me you dont have a clue what a product is but still make a video on it
All the stuff I didn’t know I didn’t need
Yeah…just as suspected….eveything is overpriced!
Worthless video without any links
ul-300 is how many thousands too much?? its the 1st thing that seems useful. then the next 3t but its not lifting the whole thing... i can lift a 5 tone car, on 1 corner only, just like this junk
That coolant flush tool tho
nice 🛞🛻👨🔧🛞