I couldn’t just pick one either. I love them all. I guess all depends on your mood that day which you gonna run it on yeah sounds good to me. Appreciate you sharing as always. Brian will catch you on the next one until then. Peace and chicken grease😁👍👍👋👋😎
That red is killer, don’t know where you’re located but would love to see all of these beautifully built rigs out on some real rocks to really test their potential 👍🏼 being located in Utah basically everywhere is prime crawling spots. And I gotta say those wt micro wheels are wicked definitely my fav of the multiple sets
I want to get them out as well! I’ve been so slammed with my work, that building em is even cutting into to that. Time is what I need!! lol. I’ll try to get some new running footage at some point. Thanks for tuning in.
@@RCAdventurers I appreciate that! I grew up building 1/24 plastic kits, so these are right up my alley. I like the compact tabletop work space needed for these. Getting the 1/10 itch again though lately! Both scales are great for different aspects.
Yeah there's the second set of Proline what was they called Duratrax well they used to make them for Pro-Line and then Proline kind of cut them loose because they was pretty much shooting their self in the foot you know Lee's Tires really really perform well I just wish they was a touch bigger for my liking
Pressure running the heavy ass body I would think that that body is going to take a lot of front weight but I've seen you build them other times and be perfect you know so I don't know what would be the difference there I don't think that brass is as heavy as we think it is either like always brother I really enjoyed what you do
@@joshpendgraft1241 appreciate that! The hubs are SSD front and Injora for the rears. The limiting bands are just black rubber bands. I got a mix of sizes off Amazon, like hair bands.
@@davidtwa6265 No full build for this one, but with this playlist, you should be able to build any WTMicro setup. ruclips.net/p/PLA9TzhR50592BRatZPScznPLg_Eck5_gE&si=U3uzSOjZNitPD3A0 -Cheers!
Couple things but one I hope that they are new EXO shafts the newer design is pretty damn good I have beat them pretty hard and not broke them but before I was snapping them like toothpicks and then that torque Servo everybody's you know blowing it up but I didn't even run one pack. And I stripped the main gear and I'm not talking about the little gear over to one side I'm talking about the gear that your Servo horn goes on underneath if it's got great big like mod 5 or mod 3 gearing and it just rounded it off like it was nothing and they wanted me to take the time out of my busy ass life schedule and send it back instead of just saying Hey will send you a new one don't worry about it or they could have just sent me the gear cuz I showed him a picture you know
I did pick up 3 sets of the new black EXOs. However this one got my last older set. Haven’t pushed these, so I have t snapped any… fingers crossed. That’s unfortunate to hear about that servo. It solves so many fitment issues and has great ratings. I’ll keep watch on it, I did pick up another… hoping for the best. We’ll see.
@@High_strung_rcI have some on the channel, not near enough. I’ve been super busy lately with work, so just squeezing in the builds when I can. - thanks for watching, Cheers!
Requesting a "sup boys" intro please.
Challenge accepted!
@@24Yepp yes!
Oh yeah, look at it with those lights on love it. I’m really digging on the red with the white top. Looks classy for sure.👍👍
I agree!!
These buddies are slick
Yeah, love love those deep dish also, now that didn’t have no problem, climbing up and over sweet👍👍
Yeah, let’s see those LEDs😁👍👍 here watching 6:41 PM Wednesday, October 2 looking sweet
Wow that looks sick! That red is 🔥 Nice servo pick
Thank you! I agree that red is hot!
Pretty Cool 😎
Yes, it does. Looks sweet with the satin.👍👍 I knew you would have more options😁👍👍
Hell yeah you did! Always got some options waiting…
I love all of the wheels oh, got a little struggle😁
Yeah, I got to admit those black spokes looking sweet👍👍
Always great looking wheels from LGRP.
I couldn’t just pick one either. I love them all. I guess all depends on your mood that day which you gonna run it on yeah sounds good to me. Appreciate you sharing as always. Brian will catch you on the next one until then. Peace and chicken grease😁👍👍👋👋😎
I agree. Like to have those different looks for different experiences. Thanks for watching as always Andy!
Yes, it does. Love the brass.👍👍😎
Build some of the most amazing rigs brother
That red is killer, don’t know where you’re located but would love to see all of these beautifully built rigs out on some real rocks to really test their potential 👍🏼 being located in Utah basically everywhere is prime crawling spots. And I gotta say those wt micro wheels are wicked definitely my fav of the multiple sets
I'll test them for him 😉
I want to get them out as well! I’ve been so slammed with my work, that building em is even cutting into to that. Time is what I need!! lol. I’ll try to get some new running footage at some point. Thanks for tuning in.
@@24Yeppthis me be the way…
Yeah, I was running a set of black label tires on my red Baron, that’s amazing how it just climbs right up that slippery plastic casings👍👍
Some of, if not, the best tires out there right now.
Very cool little build bro, 24th scale ain’t normally my bag but that’s wicked !
@@RCAdventurers I appreciate that! I grew up building 1/24 plastic kits, so these are right up my alley. I like the compact tabletop work space needed for these. Getting the 1/10 itch again though lately! Both scales are great for different aspects.
@@bcochener absolutely agree bro 👊
Yeah, nice recovery👍👍😁
Haha, wasn’t it though. Those oil shocks…. So nice.
Awesome Brian, I’ll be back in 15 hours to watch😁👍👍
See ya then Andy!
Lmao the PEACE 😂😂😂❤
Yeah there's the second set of Proline what was they called Duratrax well they used to make them for Pro-Line and then Proline kind of cut them loose because they was pretty much shooting their self in the foot you know Lee's Tires really really perform well I just wish they was a touch bigger for my liking
Extra-cab 💥💥💥
Pressure running the heavy ass body I would think that that body is going to take a lot of front weight but I've seen you build them other times and be perfect you know so I don't know what would be the difference there I don't think that brass is as heavy as we think it is either like always brother I really enjoyed what you do
What are you using for suspension limiting straps and who makes the "center caps?" Thanks for your time and keep up the great work!
@@joshpendgraft1241 appreciate that! The hubs are SSD front and Injora for the rears. The limiting bands are just black rubber bands. I got a mix of sizes off Amazon, like hair bands.
@@joshpendgraft1241 if you get the SSD type, make sure and buy the tool for them. It doesn’t come with one and it is different than the Injora type.
I was looking for a link for those tires😁👍👍
I forgot where I ordered them. Just Google Louise RC 1.0 tires. Hopefully they’ll show up at more hobby shops like Amain soon.
Did you have to shim the servo on the super 8s? Mine sits loose on aluminum super 8.
@@El_Twin I did, I use 3M double side as the shim
The new tires are they're pretty expensive also
Please wheres the full build video i really wanna recreat this build and maybe try tweaking it with diffrent parts and what not
@@davidtwa6265 No full build for this one, but with this playlist, you should be able to build any WTMicro setup. ruclips.net/p/PLA9TzhR50592BRatZPScznPLg_Eck5_gE&si=U3uzSOjZNitPD3A0
-Cheers!
Couple things but one I hope that they are new EXO shafts the newer design is pretty damn good I have beat them pretty hard and not broke them but before I was snapping them like toothpicks and then that torque Servo everybody's you know blowing it up but I didn't even run one pack. And I stripped the main gear and I'm not talking about the little gear over to one side I'm talking about the gear that your Servo horn goes on underneath if it's got great big like mod 5 or mod 3 gearing and it just rounded it off like it was nothing and they wanted me to take the time out of my busy ass life schedule and send it back instead of just saying Hey will send you a new one don't worry about it or they could have just sent me the gear cuz I showed him a picture you know
I did pick up 3 sets of the new black EXOs. However this one got my last older set. Haven’t pushed these, so I have t snapped any… fingers crossed.
That’s unfortunate to hear about that servo. It solves so many fitment issues and has great ratings. I’ll keep watch on it, I did pick up another… hoping for the best. We’ll see.
Don't think I have one will ring that is not been completely marred by Rock faces
Yeah, but I like to start clean! Lol
How many of these bastards do you have LOL I bet it's at least pushing close to 40
Oh I’m a bit over 40 at the moment!
Do you have instagram?
I do not. This is about all I have time for...lol. Cheers!
@@bcochener do you have videos of you driving them ?
@@High_strung_rcI have some on the channel, not near enough. I’ve been super busy lately with work, so just squeezing in the builds when I can. - thanks for watching, Cheers!