You forgot to say that their riser and cams are machined from 7000 series aluminum alloy. It's a material with up to 80% higher tensile strength than 6000 series alloy most of the other brands use. And their limbs don't fail.
I have a Sequel 33 on order also. Darton is going through growing pains right now. Have some long wait times. Especially for a left hand shooter like myself but being left hand I’m used to wait times.
Grew up in alger michigan shot dartons then like every one i knew did and now live in west branch michigan age of 63 now and still shoot a ds3800 love there bows .
I wish it was a longer ATA!!! Darton been in archery for year's,I'll go shoot one to check new line of bows target and hunting!!! Thanks for the video!!
If you run the bow at 65 pounds instead of 70 will it affect the feel of the cam rollover? Or will that make the bow louder in decibles to shoot? I currently shoot 60 pounds but would like to upgrade and afraid I cannot pull a full 70 pounds
I have the Sequel 33 and love it. However I had to run the integrated QAD MX rest instead of my favorite Hamskea Epsilon rest as there is not enough left adjustment due to the thicker riser. Hamskea is addressing this issue (according to a Hamskea rep I spoke to at TAC). But all in all a fantastic bow.
Do they have proprietary spacers for shimming? Had heard they was coming out with shims that were color coded. I believe the sequel has 1/4 axels and that can be a bit tricky to find spacers for that. Ive heard guys saying yoke tuning works on this but the yokes are inside the limbs, so its not really gonna do alot for tuning, micro at best. For yoke tuning to be effective the yokes need to mount outside the limbs like they were on the Prelude.
Gonna be honest, everything I know about Darton I learned when I was today years old. Sounds like my kinda company, though. Gonna give em a shot. Pun intended.
Do they have proprietary spacers for shimming? Had heard they was coming out with shims that were color coded. I believe the sequel has 1/4 axels and that can be a bit tricky to find spacers for that. Ive heard guys saying yoke tuning works on this but the yokes are inside the limbs, so its not really gonna do alot for tuning, micro at best. For yoke tuning to be effective the yokes need to mount outside the limbs like they were on the Prelude.
You forgot to say that their riser and cams are machined from 7000 series aluminum alloy. It's a material with up to 80% higher tensile strength than 6000 series alloy most of the other brands use. And their limbs don't fail.
Awesome video and thanks for sharing some back story on darton!
Everybody shoots a Darton they just don’t know it….
I fucking love my consequence bro.. it’s honestly ridiculous how great it is
i just bought the 31in Vuni last night. Im in love with it all ready.
I reside in Michigan and am very familiar with Darton. My first bow was the Darton 300 WX.
Darton was the king of speed in the early 90's
Getting this exact bow real soon!! Shot one at the pro shop and that draw cycle is unbeatable!!
Looks awesome, I'll be checking them out when I'm ready for my next bow for sure
I’ve got a 33 on order. Good video and information.
I have a Sequel 33 on order also. Darton is going through growing pains right now. Have some long wait times. Especially for a left hand shooter like myself but being left hand I’m used to wait times.
You will love this bow!!
@@olehemlock I’m on week 11 waiting for a left hand. My bow shop finally has one arriving this week so I’m hoping later this month for mine
Absolutely love my sequel 33!
Grew up in alger michigan shot dartons then like every one i knew did and now live in west branch michigan age of 63 now and still shoot a ds3800 love there bows .
Have my lefty on order. My spectra is amazing
I wish it was a longer ATA!!! Darton been in archery for year's,I'll go shoot one to check new line of bows target and hunting!!! Thanks for the video!!
They make longer ata
The 33 has a super long riser, they make a 35 and 37
@@sarcazmo I'll check ✅ them out for sure!!! Thanks for the info 🙂
If you run the bow at 65 pounds instead of 70 will it affect the feel of the cam rollover? Or will that make the bow louder in decibles to shoot? I currently shoot 60 pounds but would like to upgrade and afraid I cannot pull a full 70 pounds
I have the Sequel 33 and love it. However I had to run the integrated QAD MX rest instead of my favorite Hamskea Epsilon rest as there is not enough left adjustment due to the thicker riser. Hamskea is addressing this issue (according to a Hamskea rep I spoke to at TAC). But all in all a fantastic bow.
I’m putting a ripcord ratchet ims on mine when it finally comes in. Hamskea has known about the problem since February.
I know right. I almost went with the next gen Vaportrail Gi8 but decided to hold off
A friend of mine just drilled and tapped a hole on the left side of his Hamskea and moved the tongue over.
I have the consequence. For the price, it can't be beat
It’s fucking amazing bro i love mine
Do they have proprietary spacers for shimming? Had heard they was coming out with shims that were color coded. I believe the sequel has 1/4 axels and that can be a bit tricky to find spacers for that. Ive heard guys saying yoke tuning works on this but the yokes are inside the limbs, so its not really gonna do alot for tuning, micro at best. For yoke tuning to be effective the yokes need to mount outside the limbs like they were on the Prelude.
Nice riser
Gonna be honest, everything I know about Darton I learned when I was today years old. Sounds like my kinda company, though. Gonna give em a shot. Pun intended.
Dang, didn’t realize that a lot of people didn’t know about Darton. I want to shoot one of these but no shops within 120 miles have any in stock.
Please for the love of all that is holy, do a video on draw length adjustment with the Sequal.
The only thing missing is the pick mount but I would absolutely love to own one
Darton FTW.
What a difference 5 months makes, with the new Sequels!
Precision is a Decision? Am I wrong or am I seeing things, may we have the back story on the new channel if that is the case?
Darton 30MX. If you know, you have been archery hunting awhile!
Didn’t they close their doors??
No Athens did
Hale Michigan you can walk right were they make them awsome people.
I shot my biggest buck to date with a Darton. Double lunged a 14pt @ 40yards. He's hanging on my wall.
Except for Mathews? lol
Do they have proprietary spacers for shimming? Had heard they was coming out with shims that were color coded. I believe the sequel has 1/4 axels and that can be a bit tricky to find spacers for that. Ive heard guys saying yoke tuning works on this but the yokes are inside the limbs, so its not really gonna do alot for tuning, micro at best. For yoke tuning to be effective the yokes need to mount outside the limbs like they were on the Prelude.