Armstrong Sheet Vinyl Flooring Installation and Maintenance Guidelines
HTML-код
- Опубликовано: 6 окт 2024
- The Armstrong collection of homogeneous and heterogeneous vinyl floor covering includes a wide selection of chip designs, marbled and directional patterns, and colours. Thanks to its versatility and many benefits, it can be used in almost any application.
Provides very good resistance against stains of all kinds.
Can be recycled at the end of its service life.
Offers reduced maintenance chemicals use during life cycle.
Is suitable for the use of chair and table castors, and with under-floor heating.
This is how I was taught at the Armstrong Traveling School in the early 70s (instructor's name was Woody). This is an excellent instructional video and I am glad one of my forum members posted it at The Floor Pro Community. However, 2 sections, welding and pattern scribing, were repeated in the video, making it nearly twice as long as it should be. You can skip past the duplicate content, but when someone sees it's 32 minutes long, they might not bother watching at all. Otherwise, good job.
Woody was a real gem
Been doing this for 17 years. Can be done perfectly in half the steps. Perfect job none the less.
yup
What is the best Armstrong solution for a nursing home floor ( the falls are the most dangerous for séniors)? I'm doing some research but can't find any information. I was wondering if it's possible to use this material (the one in the video) and use rubber like the one used for kids and sports under the vinyl. Do you have any ideas or advice for this?
Armstrong has the best videos on how to be a good installer. Hackers pay attention.
This is some serious knowledge here people regardless of your "Cutting skills" I am quite sure this guy could easily loose lay it in and cut it all in by hand along the wall with a knife and fold it back glue it, rather then scribing it!
can't sell the "Armstrong" scribe that way....LOL
Nicc perfect I love this job as long time I worked n installers Armstrong vinyl flooring product
اننى اقوم بتركيب الفنيل ولكن هذا الشرح بهذا الاسلوب اعجبنى كثيرا
I was taught this way first. Then taught to cut in with a hooky. I worked at a flooring company with 8 fully qualified floor layers but I had to do all the Lino jobs because only me and the boss knew how to scribe and template sheet materials.
Richard, if you were renewing skirting and wall linings would you lay the lino all the way to the plasterboard and then put the skirting board on last, i.e. over the lino?
It's all very well and good when the conditions are perfect, not so much in the real world. Why don't you post a video of good fitters doing what they do best on site where nothing is perfect?
Àl≥8
As soon as I saw how flawless that self leveler was poured, I thought the EXACT same thing.
BINGO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
A good installer could have had this entire room installed in less time than it takes to watch this video.
That's not the point of the video though, is it?
we are pvc vinyl floor manufacture, we will pay more attention to the installation
I need him to come do my house!
شكرا لك
I don't work of roof's or floors but I did install some vinyl flooring in my kitchen. It went well but the flooring is vinyl, thin as hell and not very durable..I wish I went with vinyl planking or something better..
I love this way
confusing as phuk?
Good
it took 6 months to complete this job
David Detrana haha yeah professional installers skip half of the steps in this video.
And he earnt £150 lol
What about your cushion vinyl how is that installed.
some errors/redundancy in the editing. cool lounge music. why would you go to the trouble to weld the material and make a visible seam ? pretty involved technique... but precise.
Dude is definitely union.
Based on how good it looks I'd agree. He's no scab!
Никто не никуда не денется покрытий.
Никто не положили ковер.
this guy would make no money at a real job site that real talk
TheJonesc42 haha yeah he'd lose his ass unless he was hourly
this is why you just lay stretch in carpet fast as $&@k!
You can't mop carpeting
Not realistic way of doing it. Actually it's a terrible way to do it.
Ari Banga
your a non union hack with that comment.
This is the ridiculously long way for sure. I do this for a living and would be done welding before he had those shots down.
Brad Gray Hi Brad. Do need you need to weld or can’t you butt the seam together and seal?
My grandson wants to install flooring like his grandfather did but he wants to do your school when is the next school closest to my area 02910
Did your grandson go into the trade?