I recently laid sheet vinyl in my kitchen, and I can relate to everything you mentioned! I used a utility knife, and keeping the blade sharp was crucial for clean cuts. I made sure to vacuum thoroughly before starting; even small debris made a difference. Acclimating the vinyl for 24 hours really helped with fitting it around the sink pedestal. I faced some challenges with uneven floors, but using a leveling compound beforehand made a huge difference. I also sealed the edges with silicone sealant, which not only looks great but prevents moisture issues in case of spills. Thanks for sharing this detailed guide; it’s super helpful!
Vinyl flooring is such a great stop gap. I am going to eventually get engineered oak parquet floors from the Natural Wood Co. They will cost me about £4,000. Until then, I am going to have workmen breaking down walls, pouring cement and plastering in the entire house - vinyl will protect my floor AND look great while the rest of the project takes shape, for a fraction of the price. Really love that I can now also do it myself to save money for that oak!!
Blessed to find this video. My mother hired a shade tree person to do her bathroom floor. He put it off till later. Thanks to you I’m gonna do it myself.
Just plan out carefully and take your time before cutting. The old standby rule... Measure twice before cutting once. Count on some unexpected snags when doing the work, just simply count on it. It's rarely as smooth and clear a job as show by pros in videos, particularly for first timers. Enjoy your new floor.
Thank you for the tips. Now I know how to go around a toilet, sink etc. Watching you cut the vinyl was very helpful. I like the caulking you used on the edges. I have seen too many floors laid without the caulking and yes, water does eventually get under the vinyl floor. :)
At 4:12, you hold up a vinyl cutter. I have looked everywhere, including the B&Q site, and can find no such tool... What, exactly, is it called, and where can it be purchased?
I have no idea how I got here. Happy I did. This dude is super cute!!! And he's pretty proficient with his tools. I'd hire him! Spray adhesive is messy and a pain in the arse to clean up. Use cardboard or scrap material to shield the wall while spraying. When using the adhesive tape alone, clean the surface with alcohol to ensure no oil or residue prevents a positive bond. When caulking for the first time, use painters tape to get a crisp clean edge. This step shouldn't be rushed as it is the finishing touch on your project. Tape the floor and wall 1/4" from the joint. As stated use a tool or wet finger to smooth out and push the caulk into the void. Try to do this along the edge in one stroke. Using a wet finger you'll have time to smooth it out completely. As you can clearly see in the video their caulking is terrible sloppy. No crisp, clean edges. It easy to see they rushed this vital and visible step. If color matching caulk isn't available, use a clear caulk for best results. When using clear caulk any jagged or slightly short cuts will be visible. As always use the proper caulk for the job. They're not all equal. Always cut away from yourself. Ensure nobody is within an arm's length and a half to ensure any slip of your cutting doesn't result in the injury of another. I've seen first hand someone slipping and slicing the hand and arm of someone working next to them. There was a lot of blood, sixty stitches, scars all totalling over 14 inches, nerve damage, and two additional surgeries to fix tendons and ligaments. In total it took Janette over 18 months to recover most of the use of her hand. All because one individual was careless. That was over fifteen years ago. Janette never fully recovered. She is still coping with the permanent damage and physical scars. Cheers from Seattle!!!
I was going to have a go at wooden floor but expensive and not my house but floor seriously needs tidying up! Bought a wood saw but I'm an accident waiting to happen so thinking if doing this. Looks probably easier than it is. Half of decorating is the prep! But looks like I'll go for it.. thanks for the tips ❤ A A
Been lying lino all my life, very good video I must emphasise the importance of the floor been clean and level, if not you have the problem when I first started of relaying it all again, anything will show up on the lino if it is not entirely clean dust and damp free.
Thanks for the upload... I'm laying vinyl flooring in my kitchen... didn't know u need to leave it for 24 hours b4 gluing also using the spray glue and double sided tape together... thanks 👍
Hi Angie! As flooring rolls comes in limited sizes, it would be best to have the join at the door, as you would do using different floorings. I hope this helps!
May i ask this.. doing my basement with vinyl sheet.. should there be a layer of something.. between concrete and the vinyl..?? Or am i missing something... any help is most welcomed..
Hi John, you don't have to put anything underneath the vinyl. However, when laying onto a concrete floor, you must do a test to check for any dampness. Please refer to 1:20 on the video for details 😊
Can Lino be placed on a tiled floor. What’s the best thing to do with cracked and broken, parts missing, of a tiled floor before placing the Lino flooring?
You could use both if you wanted to. However, if you are laying the sheet vinyl in a bathroom or similar wet areas, it would be best to use the sealant as it's purpose is to stop water getting into the gaps. Trims are only used for aesthetic purposes. I hope this helps! 😊
Hi, Zinnia. We'd recommend cutting around the toilet with a utility knife. You can see this process by skipping to 3:00 in the video. We hope this helps 😄
wow thank u for this informative vid; I was going to cover up old and dirty tiles that I tried using but I guess it is better to get that all cleaned up first, its a mess and I hate carpets; vinyl flooring looks gorgeous.
Hi BQ I am going to go with vinyl flooring for my kitchen. there are two types. One is more and no "cork" backing. the other cheaper but I like the color better. What do you recommend. I want the cheaper one because of the color but I want to pay more for a better backing. What do you suggest? Does the "cork" backing make a better floor? thx.
Hi Mark, cork backed vinyl has a few advantages - Cushioning effect, thermal and acoustic insulation properties. The cushioning effect is more comfortable to walk on, although if you're planning to put a table and chairs on top, this may leave dents. The thermal effect will help maintain a comfortable temperature in colder seasons. The acoustic effect would be beneficial if you were laying it on an upper level as it reduces sound transferring between floors. As we're unsure what the "other cheaper" vinyl is backed with, we can't comment further. However, vinyl flooring itself has many advantages over other floor coverings such as, cost, easy installation, no underlay required etc. We wouldn't be able to suggest a preference on your behalf, but I hope this helps you make a decision 😊
Hi there, you can remove the flooring after using adhesive spray, although it may leave a sticky residue. You would need to double check with your landlord regarding alterations under your tenancy agreement.
Please can someone give me a product how to clean vinyl flooring because I’ve got this in my kitchen the black and white square designs ones and it’s absolutely dirty I’ve tried lots of product to try to clean it and make the white squares clean but it’s getting brown and dirty please can someone give me a product that I can buy to clean it
I've just removed the old vinyl tiles in my bathroom to find a whole other layer of single sheet vinyl. Can I just put my new roll over that one? Or would it be best to remove all of it? Complete novice over here :)
Hi Roshan, you can do. Just be aware that if there's any bumps or tears in the old vinyl, this will show through the new one. In that case, it would be best to remove the old one and ensuring you have a flat clean surface to lay the new one on. I hope this helps!
You have to get "vinyl flooring spray adhesive", make sure it's for vinyl florring. Many spray adhesives are for carpet only. I got some on Ebay for my existing flooring, but it's quite expensive. The Diall product in the video is no longer available at B&Q for some reason. Shame because it was dirt cheap.
Cracking good video thanks. When your cutting around a sink/toilet, I found easier with a steel edge, such as that from a combination try square. Flat on the floor and pushed against the edge of the pedestal makes for a more accurate cutting of the slots. The try square, still pushed against the edge, makes for clean cut around the pedestal profile. I used a Stanley for cutting.
I find it easier to remove the sink and toilet. I also don't pay too much attention to the overall cut and just nail down some shoe to cover the edges.
Is the dampness test just needed so that at the time of installation the subfloor is dry, or is it necessary for the subfloor to by dry going forward after installation?
We have a Dyson vacuum cleaner which can suck the bark off a tree, I found that the previous vinyl sheet flooring layed was sucked up in the middle of the floor causing the vacuum to cut out, is it ok use spay adhesive all over the floor?
Hi 👋 Please see out guide below to removing stubborn tape: Step 1: With a hairdryer Plug your hairdryer into the nearest power outlet and turn it on to a medium or high setting. Hold the hairdryer a few inches away from the tape and let the hot air blow over it, focusing on the edges and corners. This will cause the glue to soften. After a few minutes, set the hairdryer aside and try to pick at one of the corners of the tape. Most of the tape should come off, but you may need to take the hairdryer to it again. Step 2: Wash any residue using water, vinegar, and soap. Mix 2 cups (275 milliliters) of water with ¼ cup (60 milliliters) of vinegar and a few drops of liquid soap. Dip a sponge into this solution, then scrub the affected area on your floor using small, circular motions. We hope this helps 😊
Can anyone tell me what adhesive spray he used? I’m about to install my floor as well, but would more than just double sided tape. TIA (great video by the way)
Hi, there. Thanks for your question. Sadly we don't know exactly which adhesive spray was used in this video however, here's a handy link to those we have available: rb.gy/eyjvfx Hope that helps!
Can I lay this on very thin carpet tiles that quite frankly won't come off . I want to lay sheet vinyl in hall so got a lot to cut around is it best for spray adhesive or double side tape around edged also any tips . I'm thinking of making a template and trying to precut it
Watching again since I need to lay more sheet vinyl and I'd completely forgotten some of this info. I have since acquired a toilet jack so the toilet can be moved out of the way rather than cut around. I intend to caulk around the flange where it meets the sheet vinyl to make sure no water goes underneath. Instead of knee pads (which don't seem to fit me right) I'm going to use an anti-fatigue mat that can be moved around.
@@bandq Still need to work on it. Have to pick up lumber on a day its not raining. I'll update after I work on it, but it's not high priority with all the other stuff we need to fix first.
I googled LINOLEUM flooring and your video came up...but is vinyl and linoleum flooring the same? And are they also layed in the same way? Anything different I should know in the case of linoleum, rather than vinyl, flooring? Thanks.
The difference between lino and vinyl is that linoleum is made from natural and renewable materials and vinyl flooring is made from man made synthetic materials. The design range of vinyl is endless, while linoleum is limited. Lino can be susceptible to moisture damage and requires additional maintenance upon installation but can last a long time. I hope this helps! 🙂
What was the spray he used to help the double sided tape adhere to the floor? Will it work over concrete or do I need to prep the concrete with a sealer? Is it a specific kind of spray adhesive?
@@bandq No, not the sealant, the aerosol spray adhesive. It helped the double sided tape stick to the floor. Can you use just the adhesive for the flooring? I will be laying the floor over concrete. I was assuming the aerosol spray adhesive just helps the tape stick to the floor but not sure if it's strong enough to use by itself as far as sticking to the flooring.
We would always recommend laying sheet vinyl directly onto the subfloor. For more information on preparation, you can check out our video How to level a wooden floor here: bit.ly/3p44HII. Hope this helps 😊
I want to do a living room, a small kitchen and the corridors in the same style vinyl, if I bring in the measurements/floor plan into the shop will it be cut to measure?
the vinyl does not have glue when it is wooden floor? I have a bathroom that I want to put vinyl, but I'm not sure if it has glue on the floor of the bathroom where the vinyl will be installed ?????
You said cushion and non cushion. I can't find anything out there referencing the two types or finding it for sell under those descriptions. Explain please?
Hi there, you will find our range of sheet vinyl here bit.ly/3a7LzVO. Thicker vinyl will be cushioned and is noted in the product description. You can filter your search of thickness using the filter bar at the left hand side of our website 😊
@@bandq is this waterproof? I need something that will keep a 2nd floor bathroom from being able to leak water down to the first floor in case of an overflow.. also will this be able to bear the weight of a cast-iron claw foot tub? Is there an adhesive that would be ideal for waterproofing the wooden subfloor in the process? Thanks so much for the video!
Hi, Elaine! Not to worry! You'll be a pro in no time 🙌 If you're unable to move your appliances, we'd recommend cutting around them with a utility knife. You can see this process by skipping to 3:00 in the video. We hope this helps 😊
Great vid. My issue is my linoleum has not been stored well. Now that I'm prefitting it there are many lumps. How do I go about getting it flattened out when I glue it down? Any help is appreciated..
Of i want to remove it is it easy or not because i am in a rental apartment and i want to use this but when i want to move from here is it easy to remove it from floor? It will damage the floor or not pleaseee answer???
Hi there, this would depend on the type of floor you're laying the sheet vinyl onto. Using the double sided tape should allow the vinyl to be removed without any damage. However, if you need to use the adhesive spray, this may leave behind a sticky residue.
Hi Anna, as flooring rolls comes in limited sizes, it would be best to have the join at the door, as you would do using different floorings. I hope this helps!
i just want to know how it feels on ur feet? does it set solid? i dont want to walk on pillows, i need hard rough surfaces like tile or wood, but hate hardwood floors and cant find the color tile i need....
I bought vinyl but the roll is not big as yours to cover entire room at once so do i have to cut it and spice it together until i have a room covered with it ?? I have the double tape though
Hi, there. Thanks for your query! Yes, you can absolutely join vinyl sheets together. Here's a link to the how to guide on our website: www.diy.com/ideas-advice/how-to-lay-sheet-vinyl/CC_npci_100037.art We hope this helps! 😊
Hi, Jaquelin. Thanks for your query! Unfortunetly no they cannot be used on top of carpet. The subfloor must be a levelled, hard surface that's clean and dust free. Hope this helps! 😊
Did I miss a part ? Was there any glue or adhesive underneath needed ,,, or just the spray glue and tape at the edges ? Would this work over existing vinyl or linoleum flooring ? ( that's on a concrete slab ) .. Thanks ..
Hi there, if you're laying your sheet vinyl in a bathroom or similar wet area, please see 6:52 for information on sealing the edges, which will prevent this. If you're laying onto concreate, please see 1:21 for information on testing for dampness before you lay your sheet vinyl. I hope this helps 😊
Hi 😊 It is not recommended to lay sheet vinyl on top of tiles because over time, the grout lines will appear through. If the grout depth is not level with the tile, we would recommend using plywood or backerboards. We hope this helps 🛠
The preference would be to have it unrolled to acclimatise, however, it's not necessary. As long it's been in the room where it's being fitted for 24-48 hours prior to fitting, you shouldn't have any problems. Not allowing the sheet vinyl time to acclimatise can result in the flooring expanding or shrinking. I hope this helps!
Wishbid of done mine my self I got someone who has been doing our family carpets/floors since I was a child. And I'm not happy and he dosnt agree with me and won't sort it out. There's air bubbles in it and after watching this I don't think he did the tape thing or seal the gaps around the edges with silicone. No one anymore seems to do a job properly.
It is not advised to install sheet vinyl over laminate flooring because there is a chance that it might not be levelled or the laminate planks could move/separate underneath which could cause tearing to the vinyl. We hope this helps 😊🛠
I recently laid sheet vinyl in my kitchen, and I can relate to everything you mentioned! I used a utility knife, and keeping the blade sharp was crucial for clean cuts. I made sure to vacuum thoroughly before starting; even small debris made a difference.
Acclimating the vinyl for 24 hours really helped with fitting it around the sink pedestal. I faced some challenges with uneven floors, but using a leveling compound beforehand made a huge difference. I also sealed the edges with silicone sealant, which not only looks great but prevents moisture issues in case of spills. Thanks for sharing this detailed guide; it’s super helpful!
We are so glad you found it helpful! 🧡
Should I cut around the cat or wait until she moves?
Cut the cat
Make sure you have used a double sided tape to stick her bottom down and slowly you cut around her 😂
Pieter timmerman
If my cat does not like the flooring it ain't going down. Cat approved. Dog tested.
5
Vinyl flooring is such a great stop gap. I am going to eventually get engineered oak parquet floors from the Natural Wood Co. They will cost me about £4,000. Until then, I am going to have workmen breaking down walls, pouring cement and plastering in the entire house - vinyl will protect my floor AND look great while the rest of the project takes shape, for a fraction of the price. Really love that I can now also do it myself to save money for that oak!!
Blessed to find this video. My mother hired a shade tree person to do her bathroom floor. He put it off till later. Thanks to you I’m gonna do it myself.
Aww we're so glad you found it helpful! 😊 You can do it when you B&Q it! 🧡
How hard was it?
Shade tree?
OMG , I never thought I could manage to do any flooring. I’ve done my kitchen and it looks amazing. Thank you very much ❤️❤️
Just plan out carefully and take your time before cutting. The old standby rule... Measure twice before cutting once. Count on some unexpected snags when doing the work, just simply count on it. It's rarely as smooth and clear a job as show by pros in videos, particularly for first timers.
Enjoy your new floor.
Oh, you've already done it. Never mind.
you comment on so many flooring videos. how many floors do you have???
Farideh Eidi is it expensive and where did you buy yours from
@@montag4516 Measure twice, cuss once?
Thank you for the tips. Now I know how to go around a toilet, sink etc. Watching you cut the vinyl was very helpful. I like the caulking you used on the edges. I have seen too many floors laid without the caulking and yes, water does eventually get under the vinyl floor. :)
🧡
At 4:12, you hold up a vinyl cutter. I have looked everywhere, including the B&Q site, and can find no such tool... What, exactly, is it called, and where can it be purchased?
Had no idea about the tape. Will be buying me some and that spray. I am redoing my kitchen and i will be doing it myself. Wish me luck👌🏽
Break an egg!
Did you finish?
@@FIREcrochethairstyles he died
What tape?
P
He makes it look so easy...different when you come to do it yourself..
I have no idea how I got here. Happy I did. This dude is super cute!!! And he's pretty proficient with his tools. I'd hire him!
Spray adhesive is messy and a pain in the arse to clean up. Use cardboard or scrap material to shield the wall while spraying. When using the adhesive tape alone, clean the surface with alcohol to ensure no oil or residue prevents a positive bond. When caulking for the first time, use painters tape to get a crisp clean edge. This step shouldn't be rushed as it is the finishing touch on your project. Tape the floor and wall 1/4" from the joint. As stated use a tool or wet finger to smooth out and push the caulk into the void. Try to do this along the edge in one stroke. Using a wet finger you'll have time to smooth it out completely. As you can clearly see in the video their caulking is terrible sloppy. No crisp, clean edges. It easy to see they rushed this vital and visible step. If color matching caulk isn't available, use a clear caulk for best results. When using clear caulk any jagged or slightly short cuts will be visible. As always use the proper caulk for the job. They're not all equal.
Always cut away from yourself. Ensure nobody is within an arm's length and a half to ensure any slip of your cutting doesn't result in the injury of another. I've seen first hand someone slipping and slicing the hand and arm of someone working next to them. There was a lot of blood, sixty stitches, scars all totalling over 14 inches, nerve damage, and two additional surgeries to fix tendons and ligaments. In total it took Janette over 18 months to recover most of the use of her hand. All because one individual was careless. That was over fifteen years ago. Janette never fully recovered. She is still coping with the permanent damage and physical scars.
Cheers from Seattle!!!
Thanks for the cheerful prognosis Dr Cameron.
I had a wood look sheet vinyl installed in my kitchen, dinnet and laundry room, and my daughter told me it looked better than my 14 year old laminate
Use a hook blade around pedestal, also when doing the small cuts use carpet scissors so much easier than going upwards with knife as in this demo.
You go downwards with knife
I was going to have a go at wooden floor but expensive and not my house but floor seriously needs tidying up! Bought a wood saw but I'm an accident waiting to happen so thinking if doing this. Looks probably easier than it is. Half of decorating is the prep! But looks like I'll go for it.. thanks for the tips ❤
A
A
Glad you've found this video helpful! You can do it 🧡
Been lying lino all my life, very good video I must emphasise the importance of the floor been clean and level, if not you have the problem when I first started of relaying it all again, anything will show up on the lino if it is not entirely clean dust and damp free.
😊
Thanks for the upload... I'm laying vinyl flooring in my kitchen... didn't know u need to leave it for 24 hours b4 gluing also using the spray glue and double sided tape together... thanks 👍
I like those floating floorboards, i am using them now for my toilet room,..just getting the floor plined now, get it down before my new loo comes in.
Ooo! How exciting 🙌 Be sure to tag us on Instagram when it's completed! We'd love to see 😊
@@bandq will do, we are just doing the walls now, then floor then put new loo in..ours was very dated omg you have no idea..yuck.
What if I use same flooring in the whole house. Will I need transitions? Thanks
Hi Angie! As flooring rolls comes in limited sizes, it would be best to have the join at the door, as you would do using different floorings. I hope this helps!
May i ask this.. doing my basement with vinyl sheet.. should there be a layer of something.. between concrete and the vinyl..?? Or am i missing something... any help is most welcomed..
Hi John, you don't have to put anything underneath the vinyl. However, when laying onto a concrete floor, you must do a test to check for any dampness. Please refer to 1:20 on the video for details 😊
Can Lino be placed on a tiled floor. What’s the best thing to do with cracked and broken, parts missing, of a tiled floor before placing the Lino flooring?
you should put the products that you used below in the comments section. great video tho- best one i found on here.
Glad you liked the video! That's a good suggestion, we'll pass that along as feedback - thanks!
Can someone please tell me if its possible to use the sealant as well as the trim or should I use one or the other?
You could use both if you wanted to. However, if you are laying the sheet vinyl in a bathroom or similar wet areas, it would be best to use the sealant as it's purpose is to stop water getting into the gaps. Trims are only used for aesthetic purposes. I hope this helps! 😊
Would it be better to put it down before the sink and toliet?
You can remove the sink and toilet first if you prefer. This is down to personal preference. Hope this helps 😊
What about around the toilet base? Do you have instructions for that?
Hi, Zinnia. We'd recommend cutting around the toilet with a utility knife. You can see this process by skipping to 3:00 in the video. We hope this helps 😄
Great tutorial! And you probably get this a lot, but you are gorgeous!
Glad you found it helpful 😊
If I were to out something heavy on top of the floor, like my bed frame, would it make a mark? And if it did would it be permanent?
We wouldn't recommend having anything heavy on top of this as it would mark.
I've done my floor exactly like that without looking up how to do it!
It makes me feel good.
you should feel good, well done Ekaterina
wow thank u for this informative vid; I was going to cover up old and dirty tiles that I tried using but I guess it is better to get that all cleaned up first, its a mess and I hate carpets; vinyl flooring looks gorgeous.
You're very welcome! We agree! Vinyl flooring is lovely 😍
Hi BQ I am going to go with vinyl flooring for my kitchen. there are two types. One is more and no "cork" backing. the other cheaper but I like the color better. What do you recommend. I want the cheaper one because of the color but I want to pay more for a better backing. What do you suggest? Does the "cork" backing make a better floor? thx.
Hi Mark, cork backed vinyl has a few advantages - Cushioning effect, thermal and acoustic insulation properties. The cushioning effect is more comfortable to walk on, although if you're planning to put a table and chairs on top, this may leave dents. The thermal effect will help maintain a comfortable temperature in colder seasons. The acoustic effect would be beneficial if you were laying it on an upper level as it reduces sound transferring between floors.
As we're unsure what the "other cheaper" vinyl is backed with, we can't comment further. However, vinyl flooring itself has many advantages over other floor coverings such as, cost, easy installation, no underlay required etc.
We wouldn't be able to suggest a preference on your behalf, but I hope this helps you make a decision 😊
@@bandq ok thank you.
Hi. I am renting a house. Can have brought a adhesive spray for this task. Can I remove everything after my tenancy is over?
Hi there, you can remove the flooring after using adhesive spray, although it may leave a sticky residue. You would need to double check with your landlord regarding alterations under your tenancy agreement.
Please can someone give me a product how to clean vinyl flooring because I’ve got this in my kitchen the black and white square designs ones and it’s absolutely dirty I’ve tried lots of product to try to clean it and make the white squares clean but it’s getting brown and dirty please can someone give me a product that I can buy to clean it
I've just removed the old vinyl tiles in my bathroom to find a whole other layer of single sheet vinyl. Can I just put my new roll over that one? Or would it be best to remove all of it? Complete novice over here :)
Hi Roshan, you can do. Just be aware that if there's any bumps or tears in the old vinyl, this will show through the new one. In that case, it would be best to remove the old one and ensuring you have a flat clean surface to lay the new one on. I hope this helps!
For what was the spray before the tape? How is it called? Thank you! Great video btw
You have to get "vinyl flooring spray adhesive", make sure it's for vinyl florring. Many spray adhesives are for carpet only. I got some on Ebay for my existing flooring, but it's quite expensive. The Diall product in the video is no longer available at B&Q for some reason. Shame because it was dirt cheap.
Is it worth removing the toilet and cutting around the hole?
It's definitely something that can be done! Whether it's worth it or not, would be down to your own preference 😊
@@bandq thanks! I think I’ll remove it. Makes more sense in my mind. But i envy others that can do it without and make it look clean.
Cracking good video thanks.
When your cutting around a sink/toilet, I found easier with a steel edge, such as that from a combination try square. Flat on the floor and pushed against the edge of the pedestal makes for a more accurate cutting of the slots. The try square, still pushed against the edge, makes for clean cut around the pedestal profile. I used a Stanley for cutting.
I find it easier to remove the sink and toilet. I also don't pay too much attention to the overall cut and just nail down some shoe to cover the edges.
@@marcusanderson6131Yep. That's the best way to do it
Is the dampness test just needed so that at the time of installation the subfloor is dry, or is it necessary for the subfloor to by dry going forward after installation?
Both.
If you got wet floors there's probably an under lying problem
Do you happen to have a link to the vinyl cutter? Iv looked in your website but can't seem to find one.
We have a Dyson vacuum cleaner which can suck the bark off a tree, I found that the previous vinyl sheet flooring layed was sucked up in the middle of the floor causing the vacuum to cut out, is it ok use spay adhesive all over the floor?
One of the best DIY videos regarding Vinyl floor. Thank you.
Greetings from Portugal.
I’m taking off an old one but I’m struggling to get rid of the tape underneath it any advice of how to clear it off please
Hi 👋 Please see out guide below to removing stubborn tape:
Step 1: With a hairdryer
Plug your hairdryer into the nearest power outlet and turn it on to a medium or high setting. Hold the hairdryer a few inches away from the tape and let the hot air blow over it, focusing on the edges and corners. This will cause the glue to soften. After a few minutes, set the hairdryer aside and try to pick at one of the corners of the tape. Most of the tape should come off, but you may need to take the hairdryer to it again.
Step 2: Wash any residue using water, vinegar, and soap.
Mix 2 cups (275 milliliters) of water with ¼ cup (60 milliliters) of vinegar and a few drops of liquid soap. Dip a sponge into this solution, then scrub the affected area on your floor using small, circular motions.
We hope this helps 😊
Can anyone tell me what adhesive spray he used? I’m about to install my floor as well, but would more than just double sided tape. TIA (great video by the way)
Hi, there. Thanks for your question. Sadly we don't know exactly which adhesive spray was used in this video however, here's a handy link to those we have available: rb.gy/eyjvfx Hope that helps!
Can I lay this on very thin carpet tiles that quite frankly won't come off . I want to lay sheet vinyl in hall so got a lot to cut around is it best for spray adhesive or double side tape around edged also any tips . I'm thinking of making a template and trying to precut it
Hi there, we would recommend laying sheet vinyl on top of an existing floor covering.
Watching again since I need to lay more sheet vinyl and I'd completely forgotten some of this info. I have since acquired a toilet jack so the toilet can be moved out of the way rather than cut around. I intend to caulk around the flange where it meets the sheet vinyl to make sure no water goes underneath. Instead of knee pads (which don't seem to fit me right) I'm going to use an anti-fatigue mat that can be moved around.
How did you get on? 😊🛠
@@bandq Still need to work on it. Have to pick up lumber on a day its not raining. I'll update after I work on it, but it's not high priority with all the other stuff we need to fix first.
what s the best product to clean this thing. fast and effective.
love how you followed your own safert advice , always cut away from you , never leave the blade extracted
Safety first ✅
I googled LINOLEUM flooring and your video came up...but is vinyl and linoleum flooring the same? And are they also layed in the same way? Anything different I should know in the case of linoleum, rather than vinyl, flooring? Thanks.
The difference between lino and vinyl is that linoleum is made from natural and renewable materials and vinyl flooring is made from man made synthetic materials. The design range of vinyl is endless, while linoleum is limited. Lino can be susceptible to moisture damage and requires additional maintenance upon installation but can last a long time. I hope this helps! 🙂
Not sure why it cut to the kitchen scene for damp before tiling or dose it have a link to laying lino?
Can I use underlay or insulation?
What was the spray he used to help the double sided tape adhere to the floor? Will it work over concrete or do I need to prep the concrete with a sealer? Is it a specific kind of spray adhesive?
@@bandq No, not the sealant, the aerosol spray adhesive. It helped the double sided tape stick to the floor. Can you use just the adhesive for the flooring? I will be laying the floor over concrete. I was assuming the aerosol spray adhesive just helps the tape stick to the floor but not sure if it's strong enough to use by itself as far as sticking to the flooring.
Which glue is the best for installation
Hi Paul, the item used in the video is no longer stocked. However, you can use bit.ly/44AqVb7 as an alternative. Hope this helps 😊
Does anyone have a suggestion for how to apply a shine to this type of vinyl? My apartment flooring is so dull..
Hi, I would suggest checking the care instructions for the vinyl you have, for the best results 😊
You are professional. Can you tell us where can We shop thus vinyl?
Hi there! You can shop our range of Vinyl flooring here tinyurl.com/3hf3n2h7 😊 Hope this helps!
Do I need to remove the old vinyl sheet flooring before I install the new vinyl sheet flooring? Thanks
We would always recommend laying sheet vinyl directly onto the subfloor 😊
I don't understand the tape portion? why did you spray and put tape and removed the tape? woudln't the tape stick to the adhesive?
@@bandq got it. Thank you
Can someone please tell me if this can be laid over very low pile carpet? I’m not able to remove the carpet at the rental space
We would always recommend laying sheet vinyl directly onto the subfloor. For more information on preparation, you can check out our video How to level a wooden floor here: bit.ly/3p44HII. Hope this helps 😊
what is the spray you used under the tape, i can not find it in any shop, could you please give the name/
how do you recommend cleaning vinyl floors?
Hi, you can use plain water and a damp mop or a multi purpose floor cleaner. Always check the manufacturers instructions. I hope this helps 🙂
Are you using any particular adhesive tape?
Hi there. You can use whatever adhesive tape you prefer. 😊
Is it possible to add another layer if you already have sheet vinyl? Or do you HAVE to remove the old vinyl?
Hi there, you can lay sheet vinyl on top of existing sheet vinyl. However, it's not something we would recommend doing 😊
I want to do a living room, a small kitchen and the corridors in the same style vinyl, if I bring in the measurements/floor plan into the shop will it be cut to measure?
Pepita Underthesun if there is a pattern be sure to allow for pattern match in doorways ie if plank effect so they line up nicely
the vinyl does not have glue when it is wooden floor? I have a bathroom that I want to put vinyl, but I'm not sure if it has glue on the floor of the bathroom where the vinyl will be installed ?????
You said cushion and non cushion. I can't find anything out there referencing the two types or finding it for sell under those descriptions. Explain please?
Hi there, you will find our range of sheet vinyl here bit.ly/3a7LzVO. Thicker vinyl will be cushioned and is noted in the product description. You can filter your search of thickness using the filter bar at the left hand side of our website 😊
Would this type of flooring work with a house that is on beam and base where the floor constantly moves with different temperatures.
@@bandq thank you so much for your response
Why not remove the sink pedestal and then mount it on top of the vinyl after?
Where can we get it? can we get it in required size as per our need?
Hi, please see our range of sheet vinyl here: bit.ly/39VCZIK. Once you find one you like, you will find the dimensions in the specifications 😁
@@bandq is this waterproof? I need something that will keep a 2nd floor bathroom from being able to leak water down to the first floor in case of an overflow.. also will this be able to bear the weight of a cast-iron claw foot tub? Is there an adhesive that would be ideal for waterproofing the wooden subfloor in the process? Thanks so much for the video!
Im a complete novice and cant really move the washing machine fridge etc. so how do I get slightly under these items when laying down?
Hi, Elaine! Not to worry! You'll be a pro in no time 🙌
If you're unable to move your appliances, we'd recommend cutting around them with a utility knife. You can see this process by skipping to 3:00 in the video. We hope this helps 😊
where did you get the flooring sheet? and what is the cost on the flooring you did on the video?
thanks for your video
76h
@@bandq j
@@bandq g
My floors are uneven, can I put fibreboards down before laying the lino?
Hi there, yes. It's best to ensure your floor is even prior to laying sheet vinyl 😊
@@bandq Thank you 😊
Great vid. My issue is my linoleum has not been stored well. Now that I'm prefitting it there are many lumps. How do I go about getting it flattened out when I glue it down? Any help is appreciated..
Can this be laid over old mastic adhesive?
Hi there! Vinyl like this needs to be laid on a dry, level and smooth service or else it will show any imperfections that are underneath.
Of i want to remove it is it easy or not because i am in a rental apartment and i want to use this but when i want to move from here is it easy to remove it from floor? It will damage the floor or not pleaseee answer???
Hi there, this would depend on the type of floor you're laying the sheet vinyl onto. Using the double sided tape should allow the vinyl to be removed without any damage. However, if you need to use the adhesive spray, this may leave behind a sticky residue.
Most excellent video...sense of achievement after getting it done. Watch the videos, and 'When you do it, B&Q it🤗🤗' 😎😎
Glad we could help! Thank you for your lovely feedback 😁🧡
Does a small perimeter need to be left for any possible expansion for sheet vinyl?
Joins in large open areas?
Hi Anna, as flooring rolls comes in limited sizes, it would be best to have the join at the door, as you would do using different floorings. I hope this helps!
Can you just use the old vinyl and use this as a template and cut round it?
Obviously, just make sure it's right way round.
Should I not pull up existing trim before laying floor?
IF THE FLOOR IS DAMP OR MOIST AFTER PUTTING POLYTHENE SHEET? WHAT SHOULD WE DO? SHOULD WE PUT THE VINYL OR NOT?
Should I use the same caulking around my toilet as I do the walls?
You are amazing and love how you explained things, great job and thank you.
Thank you 😊🧡
Is there anything wrong with taking the floor screws out, lifting the toilet pan and sink pedestal, then sliding the vinyl underneath?
@@bandq
Thanks. I've learned to plumb with 40mm solvent pipe, tile and lay vinyl all in one go.
Not quite excellent but I'm satisfied with the end result. A ceiling artex repair job is next on the list.
Thanks for the video series.
i just want to know how it feels on ur feet? does it set solid? i dont want to walk on pillows, i need hard rough surfaces like tile or wood, but hate hardwood floors and cant find the color tile i need....
Who walks barefoot in a bathroom? So many germs.
@@fightermma I wear my Dr. Martens in the bath.
Vinyl is KING !
😁👑
I bought vinyl but the roll is not big as yours to cover entire room at once so do i have to cut it and spice it together until i have a room covered with it ?? I have the double tape though
Hi, there. Thanks for your query! Yes, you can absolutely join vinyl sheets together. Here's a link to the how to guide on our website: www.diy.com/ideas-advice/how-to-lay-sheet-vinyl/CC_npci_100037.art
We hope this helps! 😊
Hi found your video very helpful just had a questions can all the materials like double tap and spray still be use on top on carpet ?
Hi, Jaquelin. Thanks for your query!
Unfortunetly no they cannot be used on top of carpet. The subfloor must be a levelled, hard surface that's clean and dust free. Hope this helps! 😊
Did I miss a part ?
Was there any glue or adhesive
underneath needed ,,, or just the
spray glue and tape at the edges ?
Would this work over existing vinyl
or linoleum flooring ? ( that's on a
concrete slab )
.. Thanks ..
@S Rioghal Mo Dhream ... Thanks for the info . 👍 .
how to avoid moisture under the sheet which can lead to mould?
Hi there, if you're laying your sheet vinyl in a bathroom or similar wet area, please see 6:52 for information on sealing the edges, which will prevent this. If you're laying onto concreate, please see 1:21 for information on testing for dampness before you lay your sheet vinyl. I hope this helps 😊
can I use this on SHOWER ROOM ?
Can we patch vinyl flooring? Our puppy ate a corner up while we were out for a few hours, is it fixable without replacing the whole thing?
always kennel a dog when you leave
Can you install vinyl sheet flooring over top a floor that already has vinyl sheet flooring?
Can these be done over old peel and stick tiles?
Hi 😊 It is not recommended to lay sheet vinyl on top of tiles because over time, the grout lines will appear through. If the grout depth is not level with the tile, we would recommend using plywood or backerboards. We hope this helps 🛠
When you get your rolls of vinyl do the roads have to be laid out and flatten for 24 hours before you can do it
The preference would be to have it unrolled to acclimatise, however, it's not necessary. As long it's been in the room where it's being fitted for 24-48 hours prior to fitting, you shouldn't have any problems. Not allowing the sheet vinyl time to acclimatise can result in the flooring expanding or shrinking. I hope this helps!
Can vinyl be used directly on floor wothout wooden base?
@@bandq thnku
HI B AND Q THANK YOU SO MUCH I NEEDED THIS BEEN TRYING TO DO THIS FOR AGES 🎉🎉🎉🎉🎉
You're welcome! 😁
Wishbid of done mine my self I got someone who has been doing our family carpets/floors since I was a child. And I'm not happy and he dosnt agree with me and won't sort it out.
There's air bubbles in it and after watching this I don't think he did the tape thing or seal the gaps around the edges with silicone.
No one anymore seems to do a job properly.
Sorry to hear this, Diana! Hope you manage to get it sorted 🙏
Can you link the vinyl PLEASE!!! I need it for my bathroom apartment
bandq thank you so much !!!
Paloma Guajardo home decor
Homedecor
Where can I buy the vinyl flooring?
Thanks
Hi there, you can purchase vinyl flooring by visiting our website. We have attached the link below. Hope this helps!
bit.ly/4cG3zo8
Could you do this in a wet room?
You can do, although you will need to ensure that all edges are properly sealed and monitor it over time, in case any repairs have to be made 😊
hi are u put under RUG PAD (IM DO BESTMENT FLOOR ) my floor is wood.thank
Hello can I put this sheet vinyl on my laminated floor?
It is not advised to install sheet vinyl over laminate flooring because there is a chance that it might not be levelled or the laminate planks could move/separate underneath which could cause tearing to the vinyl. We hope this helps 😊🛠
Can’t wait to get mines , I wonder if we could quick shine/ polish these ?
bandq Thanks so much ❤️
is there something like a vinyl underlay for rolls?
Hi there, underlay is not something we would recommend putting under vinyl 😊