FORD PCM/ECM REPAIR, FORD ENGINE MISFIRE FIX
HTML-код
- Опубликовано: 14 окт 2024
- How to repair ECMs,
REPARACIÓN DE PCM / ECM DE FORD, CORRECCIÓN DE ERROR DE INCENDIO DE MOTOR DE FORD
РЕМОНТ FORD PCM / ECM, FORD ENGINE MISFIRE FIX
福特 PCM/ECM 維修，福特發動機失火修復
![VENEZUELA vs. ARGENTINA [1-1] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 9](http://i.ytimg.com/vi/SJfoPdeOPCQ/mqdefault.jpg)
NASSTRAC, great video!
I have 2010 Transit Connect with miss-fire on cylinder 4 problem. Do you accept to fix ecu if i mail it to you?
These pcm repair videos are all so frustrating. HOW DO YOU OPEN THE PCM MODULE ONCE IT'S REMOVED? not a single video shows that. Four screws removed but this thing is like glued together.
I took one apart last night and I started by cutting the sealant around the seam where the aluminum pieces join and around the plastic part I added some heat with my mini torch to release it with no issues.
Don't stick anything in the crack cause you will scape off Resitors and board traces
and heat is your friend i just used a Heat gun and alot of patience
يعطيك العافية وموفق ان شاءالله 🌹
Habibi IGBT replacement is clear, but why did you replace EPROM.
hi, how do you get a match for a replacement mosfet? do you cross reference the numbers with a chart?
It’s not Mosfet it’s a transistor number 8201NG, you can find the cross-reference on, datasheet.com
Great video. Thank you. How do I reset parameters on a used pcm and would it need programing to the vehicle?
Have 2006 Ford Ranger with this same problem. I wonder if it uses the same part?
It could be the same parts number, or buy a used PCM from the salvage yard with the same part and do parameters reset and use your old keys, its fast and save time
How do copy or clone your ecm to the used ecm
Do have a video how to clone ecm
@@772777777777777 I had to hire a locksmith for about $100.
Dude you are freaking awesome! I have a decent solder rig, would you be so kind to answer question of what kind of red Flux is that please sir? One more question if you will, what kind of cleaner did you mention in video I can't quiet hear the name clearly? Great content and much appreciation!
About the red flux paste you can use any brand for the cleaner during soldering I use alcohol from the dollar store and I use ( paint removal or gasoline) to remove the clear wax layer before I do any work. It should be an easy fix after you do it few times, let me know if you have any questions
Ty sir!
At 16:20 in the video I can swap that chip into another used ecu and would not have to program a key??
I have a 2011 ford taurus limeted 3.5 and i have a problem with troutle body already replece it twice and pedal to and still dont work
Can you share the fault code? did you check the wire harness and connectors?
Ok I need help,I have a 2008 mustang gt500 I need the ecu,I can't find one,is it true can I use an ecu from another mustang that is not gt500 ?
Hello I have some questions about what my 06 ford fusion SEL when I put the key in it and try to turn it on it clicks one time and the cluster on the the mileage are just dashes and the car with a lock flashes. This is a replaced the pcm it’s less then a year old. I still have the old one.. I have determined that the pcm and the cluster aren’t community. Do I have to open the pcm in order to find out it if I have to repair it or is there another way..
How did you determine it was that Mosfet? flip a coin head -good...tail -bad
At 16:09 the audio is not so clear about using a scan tool the press what ??? Rest on the cluster?
Can you please repeat the procedure
Thankyou
Hello, I have a problem. I have a 16 Ford F150 3.5. I have the failure in cylinder 1 and 2. It does not register a pulse from the ECU in the coils. I have continuity in the cables. Change coils. I still have the problem.
How did you determine it was that Mosfet?
Was it burnt up?
What was resistor part number?
Hi I got a ford shelby 2008 gt500 they told ecu can't be repair,can you help me?? Thanks
Good work موفق يارب
Thank you!, اللهم أمين وإياكم إن شاء الله
Hi can you replace ic71022srs on my ford explorer 2009
What is the part number for the resistor
Its NGD brand top number is 936 (8201NG), also you can buy used PCM for around $50 and program it, quick and easy, let me know if you need any help, attached is the datasheet for the transistor , drive.google.com/file/d/1T1OQOpZ5N6lHI4BaUfUEltF6Srb3wQ-8/view?usp=sharing
Do you repair SAM also?
How do you reprogram clone a used ecm from junk yard?
I have 2010 model ford explorer pcm faulty is it possible to repair it
yes it is possible to repair the PCM. Maybe this gentleman can repair it for you. If not, I have found 2 United States companies that will repair. If you don't hear from this man then reply to my message and I will assist
@@scotthsmith8635 2010 escape 2.5 4cyl....po445 so replaced evep module on front on engine then code changed to po443 so messed with fuel door, cleaned, no change. Removed pcm cleaned contacts(not dirty) painted shell(some corrosion not real bad), cleaned 2 nearby grounds, disconnected battery held + - together. No change. Car runs perfect 28.4mpg cel po 433 keeps coming back. Do I need to only get it flashed...?? or..?
Yes, it's possible but you still can buy a used one and do parameters reset it shoud be a quick fix with replacement
👍👍👍
How can the individual components inside the PCM be checked?
Signal generator
hm for the piece of processor
ems2204 ? ecu
It is not a resistor, it´s a Mosfet
I was thinking about transistor for other repairs before this Video but It’s not mosfet it’s a transistor number 8201NG
ممكن رقم لتواصل
You seriously need some soldering lessons !!!!
NO FUME EXTRACTOR COOL..😅😅😅
هل يوجد شرح بالعربي
إن شاء الله الوقت يسمح و أحاول احضر واحد عربي، لو احتجت اى مساعده بلغنى، وبعد وإصلاح واحد أو اثنين حيكون الموضوع بسيط عليك إن شاء الله
@@NASSTRACINC
اشكرك جزيل الشكر
You cant fix a microchip! 😂
so bad technique man you need to learn how to solder
🤔WHAT IS THAT GUY SAYING??? Even at full volume I can’t hear.