How To Flash Bios Chips or Eeprom Using TVP2588U+

Поделиться
HTML-код
  • Опубликовано: 6 окт 2024
  • Simple Tutorial How to Flash Bios Using Bios Programmer TVP2588U+
    This video shows the steps of flashing the bios using the Bios Programmer, starting from removing the Bios IC from the motherboard to soldering it back to the motherboard.

Комментарии • 182

  • @ilnil
    @ilnil 11 месяцев назад +6

    Very clear and professional tutorial. thank you very much.

  • @vbinamati
    @vbinamati 2 месяца назад +1

    How much AIR and HEAT applied?

  • @BSR385
    @BSR385 Год назад +3

    Great tutorial, thanks

  • @AsanMasraf
    @AsanMasraf 2 месяца назад

    Thanks so much it was a nice and simple detailed explanation. If possible gives us the type and models of those two adapters you used.

  • @ehsansiroosian
    @ehsansiroosian 3 месяца назад

    so informative . Tnx. Do you have any experience with RT809H programmer ? (compare with the programmer that you used in this video)

  • @Stuff_happens
    @Stuff_happens 6 месяцев назад +1

    Can you program without taking the component off of the board?

  • @roquefrancisco1237
    @roquefrancisco1237 10 месяцев назад +2

    that was great! concise and clear

  • @lezin99
    @lezin99 18 дней назад +1

    How the chip is fixed? I dont understand i dont see the solder. Thanks for thé vidéo

  • @mshclips
    @mshclips 3 месяца назад

    Great tutorial. God speed.

  • @luigiprovencher
    @luigiprovencher Год назад +5

    Where did you get the software?

  • @Alx-m3n
    @Alx-m3n Год назад +1

    Congratulations and congratulations on your contribution of professionalism and knowledge. I am writing to you from Spain. I am a private individual and I am asking for your help or advice, please. I need to flash an eeprom without removing it from the board. It is for a motorcycle that the vin remains installed and they do not allow me to connect with another motorcycle. Could you guide me or sell me what connector I would need and how to do it? Is there a way to set it free and not store the vin again? Thank you very much for your help and your time.

    • @andrew_koala2974
      @andrew_koala2974 Год назад

      It is illegal in every country by - International Law
      to duplicate and or clone a VIN
      Whatever you wish to accomplish - write to your
      vehicle registration Authority -
      Explain the circumstances
      and the difficulty you are experiencing -
      and what you intend to accomplish.
      I know of only one instance where a VIN was duplicated --
      and that was for a rare FERRARI that was destroyed and
      rebuilt to original factory specifications.
      ES
      Es ilegal en todos los países según - Derecho Internacional
      duplicar o clonar un VIN
      Cualquier cosa que desees lograr - escribe a tu
      Autoridad de Registro de Vehículos -
      Explique las circunstancias y la dificultad que está experimentando.
      y lo que pretendes lograr.
      Sólo conozco un caso en el que se duplicó un VIN, y fue el de un
      FERRARI poco común que fue destruido y reconstruido según
      las especificaciones originales de fábrica.

  • @ppal64
    @ppal64 2 года назад +8

    We remove the bios chip from the motherboard - why? These chips can be flashed in situ.

    • @phr3ui559
      @phr3ui559 Год назад +1

      in situ

    • @Stuff_happens
      @Stuff_happens 6 месяцев назад

      I was wondering about that. I am having trouble finding tutorials on programming/ flashing on the board.

  • @kenneth6731
    @kenneth6731 Месяц назад +1

    @00:35 Please tell me the appropriate flux to use for this process.

  • @rinndakece
    @rinndakece 2 года назад

    Ilmu solder rumit..semangat kk..mksh ilmu nya

    • @soldertua7996
      @soldertua7996  2 года назад +1

      Nyoldernya gampang, Yang Lebih rumit bikin Videonya kak, 😅😅😅😅

    • @rinndakece
      @rinndakece 2 года назад

      @@soldertua7996 solder susah kk klo g tau ilmunya .yg penting semangat nya jk

    • @soldertua7996
      @soldertua7996  2 года назад +1

      @@rinndakece Siap kak

  • @NSCdeBassist
    @NSCdeBassist 2 года назад +1

    Wow
    This is great.
    How can i get the machine and the software?
    I really need it.
    Thanks

    • @soldertua7996
      @soldertua7996  2 года назад +3

      Bios programer get on market place like ali express, and software include in box. and colection of bios can download in my site soldertua*dot*com

  • @CangkemanBadminton
    @CangkemanBadminton 2 года назад +1

    Top ilmunya 👍

  • @lakhanchouhan6652
    @lakhanchouhan6652 10 месяцев назад

    Great sir ji 👍

  • @NoCodeFilmmaker
    @NoCodeFilmmaker 7 месяцев назад +1

    Do you know where I would find the bios chip on the LA-K991p motherboard for the Dell Chromebook 3100? I've searched all over and can't find anything showing where it is.

  • @JaidervillaTV
    @JaidervillaTV 6 месяцев назад

    You Awesome! great Video thank you!!!

  • @RixtronixLAB
    @RixtronixLAB 3 месяца назад

    Creative video, thanks :)

  • @mathiaseze2286
    @mathiaseze2286 3 месяца назад

    Great job ❤️❤️ please in need help 🙏 where can i get the BIOS socket and the reprogramming adapter. I need it🙏 I'm chatting from Nigeria. Or what is it name, somebody should help 🙏 🙏

  • @festusyame8404
    @festusyame8404 Год назад +2

    thank you sir, so how
    much is the material for bios programming

  • @imtiazasim9821
    @imtiazasim9821 Год назад +2

    well done

  • @4cjaus1
    @4cjaus1 Год назад +1

    Great stuff, loved it. Does this procedure fix any EUFI problems such malware or it that a seperate chip? Thanks for any information.

  • @ilelaboyebatjis9122
    @ilelaboyebatjis9122 13 дней назад +1

    How do u get the files bios that will be programmed to the chips

  • @NoCodeFilmmaker
    @NoCodeFilmmaker 7 месяцев назад

    What's the difference between TCP2588U+ and Neoprogrammer?

  • @diyfixtool830
    @diyfixtool830 Год назад

    great video really great

  • @UniqueComputer-tx3du
    @UniqueComputer-tx3du Год назад

    Nice video.
    Does the position of the bios chip matter while in the programmer device?

    • @HeavyMedals
      @HeavyMedals Год назад

      Yes of course. Pin 1 needs to line up with pin 1 of whatever programmer you are using. Bios chips usually have a circle or something to indicate pin 1 on the chip, and the clip that holds the chip to program with have an indicator for pin 1 also. Hope I understood your question correctly , and this answer helps you. Happy Tinkering

  • @Headingmashine1
    @Headingmashine1 Год назад +1

    Can this process fix laptop which has locked bios?

  • @సత్యమేవజయతే-త7ల

    ❤❤❤❤❤ i like this video brother 🎉🎉🎉🎉🎉🎉

  • @samiyisak2232
    @samiyisak2232 Год назад

    i get good tutor bro keep it!

  • @stevebartosch8694
    @stevebartosch8694 Год назад +3

    I was encouraged to see that this can be done. However, my local shop is telling me that on my WD 12 TB MyBook (Helium Drive) which stopped spinning and makes no noise at all, that there are multiple chips to be swapped and the estimate is between $900-1800. I've already ordered a donor. (Western Digital WD120EDAZ-11F3RA0 12TB PN:2W10322 US7SAM120 Hard Drive IU HA500). Have you ever done the needed donor swaps on this one?

    • @andrew_koala2974
      @andrew_koala2974 Год назад

      It cannot MAKE 'NO NOISE'
      It either makes noise or it is silent (meaning WITHOUT NOISE)
      no noise DOES not EXIST and cannot be captured
      Clearly you do not understand the language and are not yet
      educated enough or proficient enough.
      Undertake an extensive reading program to better educate yourself.
      It will be of benefit to you.
      Learn the meaning of the words WITH and WITHOUT

    • @Dandan-tg6tj
      @Dandan-tg6tj Год назад +1

      @@andrew_koala2974 Man. Not everybody is native English speaker. Some of us speak more than one language. Some are not proficient enough at writing. If you didn't know that, maybe next time you'll think twice before saying something.
      For your information that form "makes no noise at all" is used just like "it makes no sense at all" is also used. "A loser that makes no money at all" is also used. Ask someone who knows better, maybe you're wrong.

    • @GlockGlock18
      @GlockGlock18 Год назад

      @hamorefaat5251factually right

  • @solomonbehailu3922
    @solomonbehailu3922 11 месяцев назад

    Good work

  • @faridnaser4315
    @faridnaser4315 5 месяцев назад

    Thank you

  • @sunilzachariah5343
    @sunilzachariah5343 9 месяцев назад

    good learning

  • @frankrana4821
    @frankrana4821 Год назад +1

    Please help. I have Toshiba Tecra R940 with bios lock. How can I fix this? Thank you

    • @Resados03
      @Resados03 Год назад +1

      change the "jumper" in the place where "clear cmos" is written on the motherboard and return it to the previous state after waiting for 30 seconds.

  • @thiphamtruong8129
    @thiphamtruong8129 11 месяцев назад +1

    HI! Do we always have to unsolder the BIOS chip from the motherboard?

    • @brandoalcocer1231
      @brandoalcocer1231 6 месяцев назад

      there is another way, but it needs to uncover the device and attached a clip just like on the cheap ch341a programmer

  • @alsjohn8042
    @alsjohn8042 2 года назад +1

    my cpu after flashing bios no display fun cpu running MSI H110M PRO-D i try to reset cmos battery and remove no effect

  • @carolinabremensteel566
    @carolinabremensteel566 8 месяцев назад

    Thanks ❤

  • @sabretgonlum
    @sabretgonlum 8 месяцев назад

    Thank You..

  • @Hhtfvhrcbgrejkkjhffvbhb
    @Hhtfvhrcbgrejkkjhffvbhb Год назад

    Sir, bios chip and controller ic between what different?? What work for biaos ic in pcb.
    Two ic in use program ??

  • @sososisi8790
    @sososisi8790 Год назад +1

    Hello sir i remove bios from botherboard after that i place the bios into programmer and i save the bios into my desktop after resolder bios into my laptop the laptop working but screen not showing

  • @CVPchile
    @CVPchile 10 месяцев назад

    What temperature is ideal for hot air and dont burn de chip?

  • @makindam2620
    @makindam2620 Год назад

    Good job

  • @MrKawacx
    @MrKawacx 6 месяцев назад

    Ini laptop apa om? Kalau Dell 7390 ic biosnya sebelah mana ya? Mohon arahan

  • @train4905
    @train4905 Год назад

    Awsome😊

  • @ssoukissouki
    @ssoukissouki Год назад +1

    what if the bios is password protected?

  • @sergiojuarez7020
    @sergiojuarez7020 6 месяцев назад

    Hello friend, with a question could you tell me how I could identify the bios chip on this motherboard 6050a2493101-mb-a02

  • @athos6236
    @athos6236 Месяц назад

    My BIOS chip MX25L6465E on my MSI motherboard was successfully replaced by W25q64cv.

  • @MrWaalkman
    @MrWaalkman 9 месяцев назад

    Great video! Where do you get the firmware?

    • @ISP254
      @ISP254 9 месяцев назад

      Wondering the same

    • @MrWaalkman
      @MrWaalkman 9 месяцев назад

      @@ISP254 My friend decided to buy a used Dell motherboard to replace his rooted one with. So I now know where I am going to find our BIOS image. :)
      We also bought replacement Winbond W25Q128JVSIQ flash chips in the 8-pin SOIC package. This is the flash chip that his motherboard uses, and it has a pin called "/WP" (Write Protect) which I plan on lifting from the pad and tying to low (it's an active-low signal). Hopefully it will put a stop to this nonsense.
      If (and only if) I have to I will pull the chip off of the board (probably using chip quick since the area around the chip is pretty busy). But I should be able to read the chip "in situ" so I will solder 30 ga, Kynar wires on the leads if the chip doesn't connect.
      Should I have to remove the chip, and I already have the image, I'll use the small Plato nippers to cut the chip out and desolder the cut off legs with my Hakko.
      Anyway that's the plan, and hopefully it gives you and others some ideas (for better or worse) as how to go about this.

  • @thewanderingguy5436
    @thewanderingguy5436 Год назад +1

    Bang, misalnya kita salin bios file dari mobo h61 terus kita paste ke bios lain sama sama h61 bisa nggak?
    Soalnya dari kemarin nggak ketemu file bios nya di google, dan g ada yang jual juga

  • @HedenskFraSkogen
    @HedenskFraSkogen 10 месяцев назад

    Do You know how to flash a motherborad BIOS Mx25u12872f?

  • @MostafaTalaat3953
    @MostafaTalaat3953 6 месяцев назад

    nice

  • @nabilmoussa7138
    @nabilmoussa7138 2 месяца назад

    Hi, where is your location i need doing same thing to my laptop motherboard bios please

  • @TechTipsTreasure
    @TechTipsTreasure 10 месяцев назад

    How do I download bios for older hp laptop not found on the hp support website like hp pavilion g4

  • @HerbOldenburg
    @HerbOldenburg 2 года назад

    Hi - thanks for posting this - what temp do you de-solder with? Thank you

    • @soldertua7996
      @soldertua7996  2 года назад

      I didn't measure the temperature. just play with the spacing from the solder to the motherboard. the important thing is not to burn components.

    • @PiotrK2022
      @PiotrK2022 Год назад

      Enough to melt the solder. It depends, because every hotair, even the same model and brand, can give different temperature then display shows, so you have to figure it out on ur own. Also it depends from thickness of the motherboard... Thicker requires more heat, thinner lower, because thin PCB acts like a bi-metal, so if u heat it up in one place, it may bend itself causing pernament PCB damage... The safest way to do that is preheat motherboard up to 120-150 degree Celsius and then remove/replace whatever u want.

    • @Dandan-tg6tj
      @Dandan-tg6tj Год назад

      @@soldertua7996 or the PCB board, for that matter.

  • @tko9753
    @tko9753 Год назад +1

    How did you figure out which chip is the bios chip?

    • @DanielOrgels
      @DanielOrgels Год назад

      Usually it's close to the CMOS battery. Mine was near the CMOS but closer to the SSD. The component always (i believe) looks like the one in the vid

  • @achillekameugne2390
    @achillekameugne2390 2 года назад +2

    Salut, super ! Vous faites bien de traduire en français. Merci pour cette vidéo

  • @BP-sf7br
    @BP-sf7br Месяц назад

    He doesnt show differrence between backup bios & replacement bios, second thing if there is a windows key embeded it should be retreived as well...

  • @promswift-mp1s
    @promswift-mp1s Месяц назад

    We're can i download a Sony sve14ae12m bios

  • @PUTRAJAYASERVICEELEKTRONIK
    @PUTRAJAYASERVICEELEKTRONIK Год назад

    After klik deteksi,the monitor show "can't fine data base chip"how to do this?

  • @tharcisseilunga6658
    @tharcisseilunga6658 6 месяцев назад

    Big thanck

  • @ClaudioConstrutoracivil
    @ClaudioConstrutoracivil 11 месяцев назад

    Boa noite ;Bem explicado o víde

  • @ririnnovrita7974
    @ririnnovrita7974 Год назад

    mantap...

  • @alfathprint96
    @alfathprint96 2 месяца назад

    setelah flash selesai kan jadi kosong nama model & no sn nya terus bagaimana cara mengisi nama model & nomor seri nya bang?

  • @yopyop6718
    @yopyop6718 2 года назад +1

    Do you know where can I buy Bios chip Winbond for my Asus h110 ?

    • @soldertua7996
      @soldertua7996  2 года назад +2

      You can buy on Market Place, Like Aliexpress or amazon, Or can buy local marketplace on your country. If you have a faulty motherboard you can take it from there. Make sure the minimum size is the same. The bios chip used has a capacity of 1/2/4/8 MB, if your chips bios 4MB it can be replaced with 4MB or 8MB / 16MB. And there are also two variants. bios chip with a voltage of 3.3V and 1.8V. make sure the working voltage is the same.

    • @yopyop6718
      @yopyop6718 2 года назад +1

      @@soldertua7996 Ok thanks you

  • @guillermo7133
    @guillermo7133 Год назад

    Good morning, sorry to bother you, but I have seen that you are an electronics specialist and I was wondering if you could give me some solution. I have a Sindoh 3D 3DWOX 3D printer and when I inserted a USB flash drive to update the firmware, there was a power outage. Now only the Sindoh presentation screen is displayed and the image is frozen there. I have disconnected the printer from the power and even removed the internal battery from the motherboard but it remains the same. There is no way it does anything. It has been left frozen. I'm afraid the firmware has become corrupt. I have observed that the motherboard has some jumpers, I don't know if any of them have any use. Can you help me please? Any suggestions to force flashing the firmware? How can I find out which chip on the printer's motherboard is the EEPROM? Thank you very much in advance.

    • @Dandan-tg6tj
      @Dandan-tg6tj Год назад

      Man you won't be able to do this yourself. If it's a printer of value go to a repair shop and ask them do fix it for you. If it's not expensive, buy a new one just like the one you have. This way you will be able to use the cartridges.

  • @AzanMalwareTesting
    @AzanMalwareTesting 11 месяцев назад

    Hi, I wanted to ask. By Re-Programming a EEPROM is it possible to change the Laptop's Splash Screen?

    • @brandoalcocer1231
      @brandoalcocer1231 6 месяцев назад

      I think it is a Bios firmware thingy for sure

  • @user-fp9cw7of9m
    @user-fp9cw7of9m Год назад +1

    Good effort better to buy new Mbo

  • @WilliamTell1313
    @WilliamTell1313 Год назад

    My bios chips (Main A BIOS and B Backup BIOS) on my ASRock Z97 OC Formula motherboard are removable. I can literally just pull them out of the socket with my fingers, no desoldering or anything required.
    Will this flasher with with those types of BIOS chips?

    • @Dandan-tg6tj
      @Dandan-tg6tj Год назад

      You need to switch them one with another and your motherboard should start functioning again.

  • @olawalerapheal3816
    @olawalerapheal3816 2 года назад

    Good job well done, please how do I remove zinox c4105 bios password
    I need your help
    , Please

  • @vladtheodor
    @vladtheodor 6 месяцев назад

    Hi! I have one Ausek/Hiniso/Ourlife actioncam AT-S81TR with sx16-1000 rechargable battery (with orange strip at top). I upgraded a wrong "sphost.brn" in this camera, now won't turn on. The previous software/firmware was SBC_V37-01.04.05 --- Can you help me please to unbrick this camera? What uploader for firmware should i use? Anyone the right brn? Pressing the buttons can reset something? How to replace firmware? Windows 10 don't recognise any actioncamera driver at all again. Jtag? Any help or sugestion and backup-file!?... Thanks!

  • @pipinrusman6223
    @pipinrusman6223 2 года назад +2

    fluxnya pake apa

  • @metinsaftan
    @metinsaftan Год назад

    Hi i wanted to replace my PBC's bios but i broke my old bios leg. What can i do now can you help me?

    • @sageauk
      @sageauk Год назад

      buy another bios chip of the same model

  • @testers79
    @testers79 Год назад

    mantap bang

  • @TodyId
    @TodyId 11 месяцев назад

    Bang buka tempat service jg gk?

  • @jonrobbins6638
    @jonrobbins6638 Год назад

    Bro this shit looks hard! Thanks for the tutorial

  • @ahmadhammoud33
    @ahmadhammoud33 6 месяцев назад

    👍

  • @nikdano
    @nikdano 2 года назад

    Sorry sir can you explain me. Why we know this motherboard has problem with bios chip?

    • @chachamarwa6047
      @chachamarwa6047 2 года назад +2

      its simple if you know the complete boot process cyle of a machine.
      First when a machine is booted it loads the bios firmware from that small bios chip (the question to ask ur self here is what does this firmware do?)
      one of its function is to check various hadware componets on a machine if are plugged in or are operating/functioning correctly?
      so you minght notice that this machine has a corrupted bios just by seeing it spining fans powering normaly but no display of the first startup screen (although this can be caused by other issues as well apart from bios),
      sometimes u can even see the machine not detecting key board and mouse and not booting but the boot light is blinking.
      some other corrupted bios shows a message on screen that tells you that the pios is corrupted.
      (just chek some guy known as Adam IT on youtube he has many videos on various machines with bios issues) and you will get a good grasp on how machine with bios problems behave.

    • @nikdano
      @nikdano 2 года назад

      @@chachamarwa6047 Thank Sir! I would like you to check my video about my laptop problem. I don't know it's was error bios or anything? here is the video link. ruclips.net/video/JdsrdHDiwIU/видео.html

  • @andyb7754
    @andyb7754 2 года назад +20

    Interesting video but QUIT having the "SUBSCRIBE" banner coming up every few minutes!!! Everyone will get the idea if you have it once in the middle and once at the end! That banner that keeps coming up is very, very, very annoying.

    • @SolutionsByAsim
      @SolutionsByAsim Год назад

      Such youtubers deserve subscribe

    • @sethplate7176
      @sethplate7176 Год назад +1

      @@SolutionsByAsim And you think the proper way to convince people is just to nag them with recurring SUBSCRIBE banners??? Really?! Even though I was planning to do that, after the third appearance of the banner, I have just stopped the video and checked comments if othrs were annoyed. I will neither be subscribing, nor will I finish the video. Simple as that.

    • @SolutionsByAsim
      @SolutionsByAsim Год назад +2

      ​@@sethplate7176 i have same idea. But i did not notice the subscribe banner before because i was watching the method😢

    • @garyr7027
      @garyr7027 10 месяцев назад +1

      And those annoying clicks made sucked.

  • @AndrewEdmondson-g6l
    @AndrewEdmondson-g6l Месяц назад

    Good tutorial Just ditch the mind-numbing irritating sound track.

  • @sabdahutama322
    @sabdahutama322 6 месяцев назад

    Berapa harga alatnya om?

  • @aktech3271
    @aktech3271 5 месяцев назад

    hot air temperature and speed ?

    • @romppaukko
      @romppaukko 4 месяца назад

      Not need be very speed.

  • @desmoaky
    @desmoaky Год назад

    Hi can i read flash spansion fl116kaf01 with this programmer?

    • @soldertua7996
      @soldertua7996  Год назад

      if it's spi flash memory most likely it can be programmed using this tool.

  • @Mr.Mindset
    @Mr.Mindset 4 месяца назад

    Millilitres?

  • @JoopKomkommerShake
    @JoopKomkommerShake Год назад

    Where did you get the bios files?

    • @nav2009
      @nav2009 Год назад

      From asus website

  • @rich8942
    @rich8942 Год назад

    how can I find the bios chip in any motherboard?

    • @mohharan8279
      @mohharan8279 Год назад +1

      SOIC-8 package (200mil) or 150mil

    • @rich8942
      @rich8942 Год назад

      @@mohharan8279 thanks bro

  • @few2012
    @few2012 2 года назад

    Software link please thank you

    • @soldertua7996
      @soldertua7996  2 года назад

      You can download on my site soldertua(dot)com

    • @few2012
      @few2012 2 года назад

      Software link please

    • @soldertua7996
      @soldertua7996  2 года назад +1

      @@few2012 Check on my site "soldertua(dot)com" you can download on there

  • @andrew_koala2974
    @andrew_koala2974 Год назад

    CORRECTED TITLE
    How To Flash BIOS Chips or EEPROM Using TVP2588U+

  • @ekardonsenior2894
    @ekardonsenior2894 2 года назад +2

    why desolder instead of using clips?

    • @urz7481
      @urz7481 2 года назад

      yeah. i always use sop8 clip. faster and cleaner

    • @ekardonsenior2894
      @ekardonsenior2894 2 года назад

      @@urz7481 they say if the board draws current from bios chip, you gotta somehow disconnect that pin from board. do you consider this while flashing? i don't know how much important this is, that's why i am asking.

    • @soldertua7996
      @soldertua7996  2 года назад +1

      I Have Bios Clip. But I don't use it. Because I connect with TVP often not detected. anyone know why?

  • @MohDok-o2p
    @MohDok-o2p 8 месяцев назад

    god شكرا

  • @happylifehobby9902
    @happylifehobby9902 Год назад

    Does you programmer able to program for uveeprom?

  • @abrahemgana6
    @abrahemgana6 Год назад +1

    I accept the blessings of GOD and abundance of wealth in JESUS'S name.
    A M E N.

  • @WraythNight
    @WraythNight Год назад

    I need someone that can do this in Queensland Australia

  • @lmdbyrafi
    @lmdbyrafi 2 года назад

    Software link please

    • @soldertua7996
      @soldertua7996  2 года назад

      check on my site. there it is available for download.

  • @garyr7027
    @garyr7027 10 месяцев назад

    Overall good except those annoying clicks and the repetitive song which actually ruined this video.

  • @laminetoure4101
    @laminetoure4101 Год назад

    Boujour set lamine Lg

  • @montypal4840
    @montypal4840 8 месяцев назад

    hp 840 g3 i7 6th gen bios bin file

  • @laminetoure4101
    @laminetoure4101 Год назад

    Guinness Conakry

  • @racejay
    @racejay 2 года назад

    CH341A is cheaper...

    • @soldertua7996
      @soldertua7996  2 года назад

      yes. Both can be used. I also have the ezp2020 variant but it is very slow. So I prefer to use TVP 😂