Mtk Cpu & eMMC Reballing And Installation
HTML-код
- Опубликовано: 27 сен 2024
- #MMANZILSTECH
ＬＩＫＥ | ＣＯＭＭＥＮＴ | ＳＨＡＲＥ | ＳＵＢＳＣＲＩＢＥ
SUBSCRIBE TO MY CHANNEL MMANZILS TECH AND PRESS THE BELL ICON FOR THE LATEST UPDATE
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
ʟɪᴋᴇ | sᴜʙsᴄʀɪʙᴇ | sʜᴀʀᴇ | ᴄᴏᴍᴍᴇɴᴛ
●▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬●
BGA Ic Reballing Perfect reballing and Installation | Universal Stencil Cpu Reballing | How To Reball Mobile Cpu and Ram | Mobile Ka CPU Universal Stencil Se Kaise Reball Kare | How To Reballing Mobile Cpu with Universal Stencil
iPhone Nand Reballing • Iphone Nand Reballing
How To Reballing Ic Chip • How To Reballing Ic Chip
How To Replace Typ C Charging Port SUPER EASY • How To Replace Typ C C...
Long Lasting Micro USB Port Replacement t!! Without HotAir • Long Lasting Micro US...
FPC Connector replacement short video • FPC Connector replacem...
How to replace Small FPC Connector • How to repalace Small ...
How To change mobile phone charging port • How To change mobile p...
FACEBOOK== / mmanzils-tech
INSTAGRAM== Www. mmazils_tech
TWITTER === Www. mmanziltech
WHATSAPP GROUP chat.whatsapp....
-----------------------------------------------------------------------------------
skills on another level, I wish...
रेबाल sahi नही हो रहा नीचे cpu पर ppd इकट्ठा हो जाता h
Acche se video banao na explain karke
@@vijayjangra7986mmlooop
,
kya yr dimak to lagao mere bhai,chutiya bana rahahe tum ko,ek paile se he reboll kiya he,ye to asan se nikalta he,
The chip alignment at 6:12 was priceless :)
if i'm not mistaken you had a pre heat underneath the board so thats why you easily remove the chip
You could've blown away small stuff around the IC, use kapton tape to shield it from the heat and suction picker for the IC, much safer this way
Could you reschedule me how to do this
@bernardrobsons7402 how's next week sound?
Sounds awesome
if u ever use heatgun properly u would know that its impossible when u use such nozzle diameter
newbies like to use thin diameter and thats why they blowing away smds.
Hms practical badiya channel mobile repairing ke liye
Don't try this on your expensive boards guys. You can limit heating your IC more than what shown in the video by proper method.
350- 360 c is good for cpu and emmc.
Heat 340 air 40 time 1min 861dw
Of course not everyone has soldering iron with adjustable thermostat or heat gun
380 air 40 is good for me
Ok
Good equipments & professional work
Thank you very much!
@@MmanzilsTechbro one dout pls tell…my motherboard is broken as 3 peace and droped under lake as 8 months now any chance to take datas?
I love the fan cooling at the end! Great solution!
Thanks! 👍
Thank you for making this outstanding contribution to those who can see this video。expect great movres not but just only in Mediatek chip ! Thanksgiving ❤
I leave Mediatek
Thanks for sharing the details
You can't make your own solder balls reliably. Almost a guarantee that one of those chips is shorting.
They sell solder balls in very specific sizes for a reason, so you don't put too much solder on any one pad. Those screens, aren't for pushing solder paste through, they are for lining up actual balls of solder. Too much solder on 1 pad will bridge several.
I agree with this, but again the guy got it working. He probably knows better than you...
I know those stencils are only for solder balls, but if it works for him, it probably works for anyone else. He showed the chips with the "balls" on each pad, and they all seem to be fine, so no biggy,
A stencil with solder paste is a viable way to re-ball a bga chips. Area of rectangular holes x thickness off the stencil = fixed volume --> same amount of solder on each pad. The execution in the video wasn't the best but that doesn't mean its not a perfectly good method.
@@Appri he didn't show completed repair, it's very unlikely the repair works.
@@fabian11235 it is not consistent at all, solder paste has inconsistently sized pieces in it And could have more or less solder in every tiny drop. And too much on 1 single pad will, not can, will bridge several pads.
@@Druid_Plow people reball all the time, with this way as well. So just calm down and enjoy a man do his work.
This video was shared in great detail, thank you for sharing, I love it.
DON'T copy what this guy is doing, bad heating job
@@Darktophat_10 thx mate
@@KokoSword You're welcome.
Wow men, really is very strongly work that!!! The mission is accomplished??
👏👏
Было страшно когда чипы переворачивал. Там же рассыпуха вокруг давно отпаялась, снести её так - как раз плюнуть.
Вот я всегда удивлялся таким людям и их удаче. Снять-поставить не проблема, но если бы я так чип отбросил - вся мелочь в кучку бы собралась с вероятностью 146%. А они всю жизнь так могут делать и ничего...
У китайцев ручонки мельче. Им проще :)
Your supposed to use a special machine to remove and attach heat sensitive chips. Notice he didn't show you if it posted, or could see the onboarding emmc.
1. How you get this modern tin based solder to melt at 350c? I've never been able to even get the stuff to melt at any temperature below 370c. Unless maybe my thermal sensor was out of whack or something.. 🤷♂️
2. Why didn't you use tweezers to lift the chips? Like, are you TRYING to knock other components loose? I spent around 5 years doing this sort of work, and I surely wouldn't have went about any of it that carelessly.
Well his work suck i dont think its working prob 50/50 chance of it working now also what u mean modern tin based solder you might mean the grey paste stuff that thing melts at such low temps i fixed some chargers i had lying around for fun after buying such paste and it did melted at 250 with heat gun so less temp might be suficient too thing is its made of most paste and dust of solder thats why it melts in seconds in low temp whilst solid core rosin solder need higher temps cause is solid piece of tin rather than dust in flux if you take for ex the solder the plumbers or guys that install metal tubes etc its like normal solder but bigger in diameter this thing need blowtorch to melt a solder iron takes time to melt a blob out of it
@@HeLrAiSiNg1 Dude, whether the solder was in paste form or not prior to chip installation, the metal melts together into the same solid metal when it's all said and done. And by federal law, since about 2007 or 2008, any solder used in mass manufacturing HAS to be tin based, lead based solder processing is too toxic for the factory workers and the environment.
When he started, the chip was mounted on the board with fully solidified original factory solder. I couldn't care less if the factory used a solder paste or not, after the solder was heated and the chip was installed and cleaned, that solder was fully solidified metal.
moreover he should use Blade to resize solder balls means to cut over solder balls ,making all balls shape and size PERFECT.
Well done. When I reball, some balls solder to the stencil. How do you do a perfect reballing? I tried everything but nothing changed. Maybe the stencil is not good or I should use 138c solder paste. I need your advice.
Saya dari Indonesia.sangat rekomendasi sekali videonya
После перекатки чипа надо давать остывать от комнатной температуры, а не кулером , иначе припой может цирк потом устроить
Тут видимо работа с гарантией в месяц. А что там дальше случится - не проблема автора.
@@hyppopotamm он скорей всего вообще не запустился проц перекатали а запаяли криво не отцентровали
У нас 90% вот таких мастеров,главное не попасть к такому.
I must raise the amount of tooth brushes 'cause they do a quite number of jobs not only tooth but also other things 😂😂
Unsuccessful 😂😂Kiya Hain 🤣
Perfect and good work👍🏼🌹😊
Nice job sir Google❤
I'm glad I'm before this technology.
Excelente aporte colega,saludos desde Paraguay
How do the chips stick again to the board without solder ?
Is using flux only work as a solder ?
برك الله فيك
You forgot the transistor :)
Hello.
I have a question, what you apply before you remove the shield??
Flux paste
It's so good I think it's so good it's perfect😊
Awesome video❤ next plz....
Wow, thank you so much.
Welcome!
Nice video bro, looks very satisfied
beautiful ❤
Wow. what a skill .!!!👋👋👋
how much for ic repair usually?
Good job oga
Cepat tepat pas trik nya 👍👍👍💪💪💪
Nice video
Are you using low melt solder 138c? The balls are formed very fast at 280c.
Waaah you can become heart surgeon, it has way less number of connections and piping!
Nice job sir 👏 👍 👌
Good work👍
Thanks ✌️
the best bro go ahead
very nice bro
Nice work sir 👏 👍
What is the volume of airflow of hot iron sir it is not included yet it's important also
Sorry it's hot air gun
@@luckyjamestechs1779 yes sir ,, what will be the air flow of hot air gun station
You can change emmc or ufs to nvme ??? I subscribe you. after change emmc or ufs to nvme can right
Speaking as someone who has repaired electronics for 40 years and is an electrical engineer I can’t help but think ; all this work and it’s only going to fail again from heat / cool cycles detaching the balls / chips esp without mechanical downforce. BGA is the worst thing ever for reliability - millions of devices dead before their time inflicting pain on consumers and their wallets !
you are so skillful
Very nice
Bahut sahi tarika
workmanship sucks. approach the motherboard very carelessly. You painted the entire motherboard with flux. You don't need that much flux for an integrated output. In fact, flux is a required liquid when soldering. it can also exit easily without an integrated flux.
Good job 👌
Sir, aap kaun se camera use karte hain recording ke liye
Fantastic ✔
Thanks sir
Welcome
GREAT WORK BRO
good👍👍👍
MUITO BOM PARABENS
Dhanyavaad!
good work
Sir cpu repearing krwana ka baad kitna din tak phone chal skta h tell me
best tutorials
I want that my RAM be replaced with 8GB. Is it possible?
да, но вам нужно найти совместимую
No
In MacBook Air 2012-2013 was possible to replace soldered ram to 16Gb modules.
@@antonsorokin3881 উঅ
Depends on mobile model
Is that paste lead-free
?? Cause if not lead-free.. The IC ball cannot handle the hot temp of the phone operation...
What? You mean the opposite. If leaded, it can handle it.
@@Appri no.. You said wrong.. Lead free is stronger
If you are also a technician when Nokia Era... You know that BB5 type using lead free.. Like Nokia N70, 6600,7610, they are use lead free.. Many failure to detach them if you blow it with hot air too hot... Its hard attach because of lead free
@@wielijustice "If not lead free, the ic ball cannot handle the hot temp." My god, reread what you said. Lead free is unleaded solder which takes higher temps. You said IF NOT LEAD FREE.
@@Appri omg.. Yeah.. Sorry.. My bad.. Yes i mean lead free... Lead free should be used.. Cause android have high temp
In which and What course we have to study to learn this type of skills....?
nice. work
I need an electronics engineer Repair and restore the board for all types of air conditioners working in Saudi Arabia
lehimleme sıcaklığı kaç olmalı çiplerde?
bu yorum youtube aramalarda ilgili konuyu bulmaları için yazılmıştır teşekkürler
Thank you
Hello how are you? great video, always learning a lot with your videos, I would like to put an excerpt from this video on my channel, do you authorize me? I'm south american from Brazil
이건 한번 리볼링 했던것을 또한 번 진행하는 동영상 같습니다.
Ooo hlo Etna der me to is ki maa bhen ho jayegi 😂😂😂😂😂jisko pta nhi h wo like kr diya lag gya hogya wo sahi trh chla ki nhi dekhao Etna tym me to gya IC 😂😂😂😂
Ok so anyone else wonder how he gets the chip's pins to line up perfectly when resoldering? 🤯
Usually chips move around by themselves when the hot solder touches the pads. They sort of stick into position.
on the right side from above, you unsoldered a couple of elements 0:51
Kahan per hai aapka dukaan please bataiye bhai Jaisa bhi aap bata dijiye Ham vahan aaenge ki hamara mobile bahut din se kharab ho chuka hai
And sometimes i find it difficult to solder two wires 😂😂😂.
Нижний подогрев сколько? Верхний мощность какая?
Он без нижнего работает
Хер ты чипы поднимешь без нижнего... Скорее всего они отреболленые на свинец
@@Big_BOSSSSSSS да я тоже офигел от этого
salam from surabaya java island indonesia
wallykum salam
My problem is forming the balls,replacing is no problem especially for feature phones
Interesting sir, I would like to contact you for replacing a cpu in a system board
Top service....
I'm no expert, I think they are surface mounted microchips.
Jack n Jill to be exact
Please what was the soldering temperature? There is no information in the video.
350°c +-10°c
350
This is Content is Done by professionals
He already removed ic or multiple time removed id bcz there no ic paste 😊 i do this so many times sucessfully
man, get yourself a vacuum pen, you are knocking off components while lifting.
Thanks
Gooooood
Probably the most half-assed reballs I've ever seen. It's also more cost effective to just buy a new phone instead of waste your time reballing
What liquid you put to the CPU and emmc.????
мтк самые нетребовательные процессоры к температуре
мне интересно там все таки куча зелёных пятаков или это тако ищвращеный способ погреть чип?
Sir is that pasted ic? Can we remove ic with 007?
Why there is no blue ?
bro scrapper konsa hai achcha laga
Top
Mujhe daut h sir ye set on hua hoga bhi ya nii ????
Perfect
1:50 asthafirullah voice ❤