Видео

i have the same issue with a EK3 1998 CVT transmission,, Do you think its the same problem or should i look in another place first?

Could you link the Part Number to the module?

Thanks for the video but this did not work for me.

❤ Solved!

so bad technique man you need to learn how to solder

25B-D013N114 Is a PF-525....

Can you send me your e- mail. We have problem with mitcubishi l200 , car wont start, we cant enter ecu module, all other modules like airbag, transmision , key... Are saying ecu can timeout we tried to flash with flex and can lines work

Hello, I have the same problem. how do I do it with the pc what do I download if you could help me thank you HELPAAAAAA

How did you determine it was that Mosfet? flip a coin head -good...tail -bad

If i just replace the sensors do i need to do this?

thank you

I’m having no crank no start white wire to my starter no getting enough current

Hi. I have a 2011 Sonata with only 38,000 miles. It has a new battery battery and starter. It has no power to anything and no crank. It started three times using jumper cables, but then stopped that also. What should i check? Thanks.

if you disconnect what does it impact?

Can't understand

You know what VERY famous? You take your car to the DEALERSHIP for a "recall" or 2 and then they tell you it doesn't need it after all... but do an 80 point inspection "for free" and the next day you get a ENGINE LIGHT code. Classic.

Great❤❤❤

How did you removed the cover? Did you used heat gun to soften the gasket maker?

Hi

I need help with Volvo xc90 2005 loses communication with cem when driving and the alarm turns on at night randomly

I dropped my fob for my 2007 XKR and now it does work. Any advice?

What u know about ac control panel not lighting up or being responsive at all , it worked fine before car sat for awhile with dead battery

I have a pre-collusion light on too, took it to the leadership. They did diagnose 3 hours charged me $600 for diagnosing only and were asking $4000 to repair, this is what they found in diagnose. Can u suggest how could it be fixed? Wiring Harness: FOUND PIGTAIL HARNESS TO FRONT RADAR SENSOR ALL WIRES REPAIRED. WIRES TO FRONT RADAR SENSOR ARE SHIELDED NEEDLE HIGH SPEED WIRES. MEANING THERE IS METAL SHIELDING AROUND THEM ONCE THEY ARE BROKEN THEY CANNOT BE REPAIR PIGTAIL HARNESS HAS TO BE REPLACED. ALSO FRONT RADAR SENSOR WAS REPLACED FROM ACCIDENT. IT IS A COMPUTER ANY IMPACT TO SENSOR CAN CAUSE INTERNAL DAMAGE. BEST TO START WITH REPLACING PIGTAIL HARNESS AND FRONT RADAR SENSOR.

I just but a chr thinking toyota were great, now i have all those dam lights on Even says engine problem and wont run fast. I should hot a honda and not this crap

We have a 2003 focus which had ABS and brake lights on in the dash..It had an ABS code B1342 and the abs was not functional.I saw and researched so many forums for clear advice as to whether we would have to reprogram a used ABS control module becuz of it having a different VIN#...What I found was conflicting advice, with some people saying it was plug and play no coding needed at all and others saying they had to reprogram it...I got fed up with speculations and orderede off ebay, a controller that was from the same yr focus and had the same part numbers on the controller as well as same software #'s.. I bolted it in ,fired up the car, saw the abs lite still on and checked the codes...there was no longer the B1342 code, thank God, but instead I saw a code for a wheel sensor and one other for low battery...no codes came up as far as Vin# ... I decided to clear the codes and rerun the test since battery was fine and wheel sensors all checked ok previously... after clearing the codes, I turned the key and no more abs or brake lites on the dash...I ran the scanner again and no codes at all for ABS system.....I test drove the car, did some panic stops and confirmed the antilocks are working properly no skidding and I could hear and feel the abs pump briefly during the stops...I share this result becuz so few people ever seem to post resolutions to such issues... they come into forums, ask for help, some say they fixed the issue and then dissapear not sharing How they did it.. WTF?so in a nutshell, Its obvious that some cars can do this swap of the controller and its plug and play... why the contradiction? probably becux the controller I chose was an exact match,not just one from a span of yrs that could be made work on the car.. 2nd, it was an older car and 3rd, it did Not have traction or stability control in the abs... cars that Do have it may need to be programmed and well as general matche d modules from other yrs , I could see why that would be needed especially if the software versions are Not identical.. Anyway hope this helps Som others who were seeking clear advice but found nothing but confusion and contradiction... I sure would have appreciated a post like this when I was scouring the web for any help.

fantastic your solution for unlock a virtual machine after power battery lost

Bin code 😂

Need a video on how to get the headlight out or off without taking the whole bumper off... thanks Ford for making it ridiculously hard to change a bulb

Great info but Xhorse should fix this!

Hi can you replace ic71022srs on my ford explorer 2009

hi, do you know the eprom location of med 17.7.2?

Hello friend, sell me the file or how much does the VIN change service cost? 😊

it worked thank you !

ممكن رقم لتواصل

I have removed both bumpers and I was wondering why the car no longer detects the key. You just answered, thanks !

I need a spiral cable for hyundai tucson

Well done, would you please send me the wiring diagram you used in this video

Would this be the same fix for the lexus es300h 2021?? I got the same codes

will a ADC2011 starlink cable work?

hm for the piece of processor

I need to have this done but dont want to give the toyota shop 600 dollars (obviously dont have the 3grand for a programmer) can i get a key and brain box and swap it in? What reads the signal from the key?

Hello. Ford Fusion plug-in hybrid 2013. Auto high beams not working. It was working before, but it doesn't start automatically for 2-3 days. Please tell me what to do.

NO FUME EXTRACTOR COOL..😅😅😅

اخي انا معي بي ام دبليو 760li معي نفس المشكلة ولكن لما شيكت الفيش عطانا كهرب ١٢ فولت والثاني ٥ فولت، ولكن في الفحس دايما يعطي كود p0286

where is the follow up video?

Does this code causes the car not to start?

At 16:20 in the video I can swap that chip into another used ecu and would not have to program a key??

thanks good information. Can you tell me Thanks

whar year is this toyota??

i want to study this. can you teach me and I would like to pay to build the file