How to replace REAR brake pads and discs, Ford Galaxy (S-Max, Mondeo)
HTML-код
- Опубликовано: 2 июл 2020
- Here's link to video about FRONT brakes:
• How I replaced brake p...
Here's the link to our website with step by step instructions, also available in printable PDF:
www.wheelsandmotors.com/manua...
WheelsAndMotors.com - Free online car repair and maintenance manuals!
And here is the link to eBay search results, where you can find caliper rewind tool:
rover.ebay.com/rover/1/710-534... 
Авто/Мото
BEST VIDEO ON RUclips ,STRAIGHT TO THE POINT AND WELL EXPLAINED
Thank you 😊
Thanks for the video. The brakes on my 2018 S-Max were slightly different. It has electric parking brake. I used Forscan to put the brakes into service mode (choc wheels first!). This retracts the piston but I still needed to push it back a bit further with a G-Clamp (no big force required). Otherwise I only needed a 7mm hex for the pins and 15mm socket for the bracket bolts. The outer pads (Pagid) came with a 3M adhesive pad attached. Needed to clean the bracket and remove the backing tape before fitting.
Thank you, sir, for time and efforts to explain whole process so neat and detailed.
You're welcome 😊
Please check step by step instructions on my website:
www.wheelsandmotors.com/manual/6104325a36720600044c3085
thank you for your time on helping people to work on there own cars 👍
Thanks 👍
good video good audio good explanation..perfect keep it up
Thank you! 😎👍
Thank you very much for such an excellent tutorial. Really appreciate that 😊
You're welcome 👍
Great videos easy to watch and understand keep up the good work ;-)
Thanks 👍 I'll try my best 🙂
Great informative video
Thanks RigaSaurus 🦖👍
THX. It was is good video. Everything nice and easy explain.
You are welcome 👍
Good video 😀👍
Thanks 😊
nice video man
Thanks 😊👍
Thank you so much for sharing this very useful video. I have been following you for over a year now and have learnt so much from your tutorial videos. Is there a chance you can post a video on how to replace a rear spring coil on on a galaxy. Thank you once again.
Happy to help Jay! Unfortunately at the moment I only make videos when something actually needs to be done to the car. That Galaxy belongs to my taxi driving friend, I don't think we'll have time for experiments. However in the future, I'm planning to do more comprehensive videos.
Well done... thx
You're very welcome 👍
Perfect
hi would you know if possible to fit a sat nav to a 2014 galaxy and how would l find out how to fit Ford-1.6 Galaxy-Titanium-X tdci thanks Loll
Sorry I don't have any experience with that.
Any idea why my handbrake was perfect before I had my disks and pads changed on my 2007 galaxy but don't hold sometimes after they were changed? They've adjusted the handbrake but it still rolls back after being parked up on the hill outside my house.
I think handbrake needs to be readjusted properly..
@@wawayltd Thank you
Please tell me what brake pads did you use, length and breadth, and tell me what brake pads to use on the front wheel pads, i have ford galaxy s max 2009
You can use any brand you like, but make sure that it's the same type, as it can vary even for the same make/model/year
How can you tell it's time to change the discs?
I am about to change the pads on my Ford Galaxy 2.0 and my discs look pretty much the same as the ones from your video. Not sure how long ago it was done as I bought the car recently and I don't think there history about discs being changed. If there is, it must have been some time ago.
I have noticed that when braking hard, I can hear a noise which is coming from the front brakes. Could this be a sign that the discs also need changing?
Also, your videos are really helpful, I am going for my second job on this car after being encouraged to also do the brake bleeding after watching your videos. So, thanks a lot!
Hi Jeff, the reasons I would consider to change discs:
- they are worn out and there's a sticking out edge on the outside
- I get vibration when braking on high speed.
- Any other signs of being worn out.
Squeaking noise could be just pads..
As far as I know, officially there's a minimum thickness. I don't know it - I just go by feel.
@@wawayltd @WheelsAndMotors Great! I think it's time to change the discs then. I do get the sticking out edge on the outside and some vibration when braking(front only).
Would it be ok to change the front first and rear at a different time?
Also, do I need to bleed the brakes when finishing the job?
Thank you
You don't have to change rear brakes same time as fronts. Change rear when they actually need it.
In that video I have done unnecessary thing, which is disconnecting brake fluid line. Most people (including me) just push caliper piston back without disconnecting it from brake line (little hose that brings brake fluid into caliper). If you don't do that, there's no need to bleed the brakes. Just keep an eye on fluid level in reservoir.
Is this applicable to a 2017 ford galaxy?
I don't know sorry. New Galaxy came out in 2015 and I don't have any info on those.
I can't get my disc out through the bracket, the disc is free moving, but it just doesn't come out as the bracket is in the way. I can't get the bracket bolt undone either
In this case the only way is to remove bracket... Breaker bar?
@@wawayltd yeah had to loosen the bracket, which was a right pain as those bolts were right! And they kept rounding off
god damn, now i need caliper rewind kit....
It doesn't have to be whole lot, you can get little more or less universal tool, sold widely in part/tool shops, it should do the job... or, if you're not in a hurry you can get full set on eBay for cheap.
@@wawayltd www.amazon.co.uk/Brake-Caliper-Rewind-Tool-Piston/dp/B01FFKP7Z2/ref=sr_1_13?dchild=1&keywords=ford+brake+caliper+rewind+kit&qid=1600354876&sr=8-13
i just need the one specific to the galaxy, hopefully that will do
Swapped successfully this morning both sides and discs ... thanks for the video
You're very welcome 👍