Adapting Infolithium to Infolithium

Поделиться
HTML-код
  • Опубликовано: 5 сен 2024
  • In this project (which you should not attempt unless you've learned from someone better than me how to do it safely) I take the gentlest practical approach to juicing up an old camcorder. As with all my workbench videos, "don't do it like this"
    Support my channel:
    / cathoderaydude
    ko-fi.com/cath...

Комментарии • 624

  • @CathodeRayDude
    @CathodeRayDude  3 года назад +524

    Hilarious update: A week later, the friend who gave me this says that someone dropped off another one which included both the now-unobtainable adapter (the commercial version of what I made in this video) and the proprietary power cable "which everyone throws away."

    • @ExperimentIV
      @ExperimentIV 3 года назад +17

      did you get them?

    • @datachu
      @datachu 3 года назад +36

      I feel like literally almost everyone is completely incompetent with their power adapters/charger bricks... Like, does no one have just... a drawer where they keep every single power adapter, neat and labeled with one of those battery-powered label makers? How do you even loose a giant heavy black brick?

    • @sauli01
      @sauli01 3 года назад +40

      @@datachu you guys label the power cables? I tought it is supposed to be 30 minute mission to find the correct one

    • @Kalvinjj
      @Kalvinjj 2 года назад +8

      @@datachu to be honest I think I'm already on the upper-end of a normal consumer (not talking about pro equipment then) in therms of tidying my cables, and they're all in a box just tied together and done, heck labeling them up is definitely something I would only do when someone tasked me to keep their cable mess tidy (and I know for sure it would be a 1 month only thing, the next month it would be all a mess again).

    • @datachu
      @datachu 2 года назад +12

      @@Kalvinjj I probably just enjoy using my label printer more than I should lol. It just makes such satisfying noises.
      Brrrrrrrr _Awkward Pause_ Snip-Snap *BEEP*

  • @cfredrics
    @cfredrics 3 года назад +313

    “Just replace the cells” reminds me of an old adage of my mother’s: “The definition of easy work is work that someone else has to do.”

    • @Kalvinjj
      @Kalvinjj 2 года назад +15

      the "Just replace the cells" lives along the "Just buy another one" and "stop being poor"

    • @nerys71
      @nerys71 2 года назад +8

      replacing the cells "IS" easy. its getting the god damned things out of their little coffins that is a pain in the freaking you know what.

    • @xarin42
      @xarin42 2 года назад +2

      Must be why "just" is one of my own mother's favorite words, considering how she makes everyone do everything for her >.

    • @flandrble
      @flandrble 2 года назад +3

      @@nerys71 unless planned obsolescence is built into the microcontroller, and it wipes itself with the cells removed, or doesn't reset charge count and has a charge count limit, etc, which is the entire reason why these smart lithium batteries exist.

  • @LightTheUnicorn
    @LightTheUnicorn 3 года назад +90

    That's a pretty genius mod to be honest, anything that can give new life to a device with an otherwise impossible to find power source, I'm all for!

  • @GuilhermeTrojan
    @GuilhermeTrojan 3 года назад +92

    dude i love you more because of your mistakes than because of your good doings

    • @NicolaiDufva
      @NicolaiDufva 3 года назад +7

      This is so true. Many would just edit out the mistakes and only show the success. Here we get teh full story, mistakes and all.

  • @carlosmn
    @carlosmn 3 года назад +48

    When you put "he's back" on screen I thought it was a reference to the Dremel tool. I'm glad it was the cat.

  • @brhfl2812
    @brhfl2812 3 года назад +140

    Extremely refreshing to see someone who is rightfully reluctant to work with lithium ions. I hate projects that involve being forced to worry about them.

    • @DrewWalton
      @DrewWalton 2 года назад +3

      This. Lithium Ion batteries explode if you look at them wrong.

    • @nicknick8148
      @nicknick8148 2 года назад +7

      @@DrewWalton I solder Li-on packs for drones all the time. Never had an issue. Li-on are so much safer than lipo. Lipo is what is dangerous

    • @DrewWalton
      @DrewWalton 2 года назад

      @@nicknick8148 shit that's what I was thinking of! Lipo, not Li-ion. Good catch mate. Cheers!

  • @jongmassey
    @jongmassey 3 года назад +235

    The cast iron pan being the upgraded version of the explosion containment pie dish?

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +70

      correct!

    • @jongmassey
      @jongmassey 3 года назад +24

      @@CathodeRayDude an extremely wise move. I've learned the hard way about fucking around with lithium packs. No fire but lots of sparks and an inadvertently welded leatherman. Never again!

    • @duncathan_salt
      @duncathan_salt 3 года назад +4

      I was thinking the exact same thing

    • @Kalvinjj
      @Kalvinjj 2 года назад +2

      Far better than my quick-slap open window tactic

    • @lukeonuke
      @lukeonuke 2 года назад +2

      @@jongmassey my neighbours house burned down due to a litihum battery getting punctured, they are not for messing arround

  • @Di3mondDud3
    @Di3mondDud3 3 года назад +77

    "Im not saying don't do it, I'm saying be ready for a fire." T shirt quote.
    I love your cat. And the tech. But also cat. Much cat.
    He cute.

    • @flp322
      @flp322 3 года назад

      🐈

    • @alexdhall
      @alexdhall 2 года назад

      Love the kitteh supervisor. He's gotta inspect *everything* 😻😹...

  • @Ranger_Kevin
    @Ranger_Kevin 3 года назад +213

    CRD: "I've never found a device that actually uses this data contact"
    Sony: "Hold my beer!"

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +86

      I should not have challenged sony

    • @tituslafrombois1164
      @tituslafrombois1164 3 года назад +38

      Well of course Sony would be the one to make use of the technology Sony created.

    • @molivil
      @molivil 3 года назад +25

      Yeah I have a Sony Mavica that refuses to use non-authentic batteries. It turns on, then displays a message saying the Mavica is for use with "infoLithium" batteries only, and then shuts off. What a troll. Fortunately some chinese battery manufacturers source the Infolithium logic board so it will trick the camera into believing it's an authentic battery.

    • @gabotron94
      @gabotron94 3 года назад +12

      Nikon laughing while counting bills. Their DSLRs wont even take fake battery adapters

    • @Ranger_Kevin
      @Ranger_Kevin 3 года назад +17

      @@gabotron94 Good to know, one more reason that makes me glad I went with Canon back in the days... their DSLRs just say "cannot identify the battery - do you want to use it anyway?" "Okay, here you go" when I plug in my 3rd party mains adapter.

  • @maltoNitho
    @maltoNitho 3 года назад +42

    “Just!” Omg that killed me I laughed so hard. And it’s so true. Yeah I dig this style but I also love everything you put out. Tyty!

  • @sicklebrick
    @sicklebrick 3 года назад +19

    I love the extent to which you went to get that battery working. Growing up without internet, it felt like nobody else would spend their afternoons obsessing over silly things like this. It's so nice to see, and so nice to see that so many others are interested.

  • @random_n
    @random_n 3 года назад +17

    Classic JB Weld is the bee's knees for sticking ABS plastic together real good. Sets to almost that exact shade of charcoal grey, can fill pretty big gaps, and sands fairly nicely. Not that you need it since the proper adapter wandered in, but there's *always* a next time!

    • @neb_setabed
      @neb_setabed 2 года назад

      I was going to say hot glue

    • @fordesponja
      @fordesponja Год назад +1

      @@neb_setabed Hot glue is bad for long term and exposed parts, it dries up and cracks. It's more like a meanwhile or test application rather than a definitive one. Epoxy is the way to go, JB Weld fits nicely here.
      And if you want a well done thing, definetly 3d printing.

  • @zugazugaye
    @zugazugaye 3 года назад +10

    I love how you showed me that everybody does that kind of mistake. Im a repair guy and sometimes I really outdumb myself

  • @rankin23007
    @rankin23007 3 года назад +16

    As someone who has done similar to tool batteries. I appreciate the heck out of "just be ready for a fire"

  • @tylerk6206
    @tylerk6206 3 года назад +63

    There's something about the sound quality of your videos that i love. I can't describe what makes it different from other youtubers, but it's different and better. It makes the sound "feel" like I'm watching a relaxing hobby show on PBS or something.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +32

      Thank you! I'm really glad to hear that, I spend a *lot* of effort trying to get my audio right and I'm glad it's appreciated

    • @kelownatechkid
      @kelownatechkid 3 года назад +12

      I notice this as well. I often have issues with youtuber audio (lack of de-esser, muffled, bass boosted, whatever crap people do) but these videos are music to my ears. Edit "sharp, short pulse of high voltage" is the best part of this video lol

    • @javaguru7141
      @javaguru7141 3 года назад +3

      I totally agree! I would love to know how he does it.

    • @BeastlyKings
      @BeastlyKings 3 года назад +2

      Yes this audio is very good. Mr carlson also has amazing audio

    • @lurkersmith810
      @lurkersmith810 3 года назад +4

      As someone who's worked on my share of amateur videos, the one thing that makes video bad is the sound, often much more than the picture. I've worked with people on projects where they thought that could just go "run-n-gun" to shoot a scene with the built-in mic. No bueno! You definitely need the right mic and sometimes a mixer and someone watching the levels to get good sound even on consumer or "prosumer" equipment. Automatic Volume Control really sucks! Even a basic lavaliere mic is better than nothing, but a mic on a broomstick (poor man's boom) is even better! (For shooting scripted drama.) All that said, I still enjoy @radiotvphononut even with the vintage camera and built-in mic. He gets a pass!

  • @kw9849
    @kw9849 3 года назад +67

    Lithium cells are one of those things that people just never seem to appreciate are actually really dangerous if you mess around with them. Kind of like tires.

    • @Honeypot-x9s
      @Honeypot-x9s 3 года назад +18

      Tires and lithium batteries and car springs all share one common theme and that is people either beleive they are litterally bombs or people think they are harmless… very rarely are people in the middle where the danger really is. The danger isn’t that any of these things are out to kill you but rather the amount of energy they contain in amount of space they consume is very dense… similar to a bomb… however unlike a bomb they aren’t just ready to kill you at any time
      All of these things including lithium batteries if they are in most relaxed state, IE, discharged, deflated, or unbounded they are minimally dangerous. They can still all be dangerous, a “dead” lithium battery can still contain enough energy to ignite some stuff and get hot… but be more like a AA battery shorting out when lithium battery is at cut off voltage. a tire flat on the rim can still bite you back with the bead wanting to either be seated or unseated if your pulling at that by hand, and a spring even with tiniest amount. If rebounded it can release more energy than is being imputed depending on the material and the preload.

    • @Stargazer1312
      @Stargazer1312 3 года назад +2

      Wait, what's up with tires?

    • @tamberp
      @tamberp 3 года назад +11

      @@Stargazer1312 It's that whole deal of a not insignificant amount of air compressed into a relatively small space, which results in quite a bit of stored energy. Safe enough, most of the time, to be around all day; but if all that energy gets released in a hurry, it can be quite unpleasant.

    • @555Tbird
      @555Tbird 3 года назад +6

      @@Honeypot-x9s Coil springs are fine right up until you actually have to remove or replace one on a strut. Then it's a bomb.

    • @kaitlyn__L
      @kaitlyn__L 3 года назад +5

      @@tamberp oh, right. I worked on tyres on push bikes since I was really little with my brother, so I was confused about tyres too. But that’s because he taught me well and I don’t even consider doing anything on a tyre without fully deflating it first. Actually that’s got me thinking: do cars still use inner tubes? Or do they just hold the air directly like tubeless bike tyres? In which case yeah that’s even moreso needing deflation first yeah.

  • @FalconFour
    @FalconFour 3 года назад +16

    Also fun little tidbit: I'm pretty sure that "C" pin doesn't mean "Charge", it means "Communication". If I were to guess, it's probably a 1-wire communication bus, which is why the board on the old battery was so complex, and "InfoLithium" was such a big deal. The controller on the battery monitors power going in and out of the battery, judges the cells' lifetime, and gives the camera that fancy little battery gauge - which the camera would have no way of knowing without being able to judge the cells (swap the pack, change the cells, and it loses all behavioral info about them). So the individual packs track energy (Wh) going in/out of them, and the camera asks it for that info to display on the screen and act upon.
    So yeah, that pin is important. :) Most cheap devices don't care about the pin, because the controller also has hard logic: it'll cut off power flow "with force" if it's being over-charged or over-discharged. So they just rely on that brute-force safety mechanism. Bad tactic, but it ... works ... so, cheap-crap manufacturers don't care.

    • @FalconFour
      @FalconFour 3 года назад +10

      oh and related factoid: these "smart battery packs" will completely freak out and set a "permanent fault" fuse, if they detect that any of the cells in the pack "go dead". So if you take apart a pack, and break the connection to the board, the board will use its remaining power from other cells to write "ACK! I AM PERMANENTLY DEAD!" (to its EEPROM memory), and you will never be able to charge/discharge it using good cells again. You have to get tricky - either find a way to cut off its main power supply (I think the negative-most supply lead, maybe?) so it can't write to its memory in time, or put the pack "on life support" and replace one cell at a time using a benchtop power supply set to 3.5v or so - like a heart transplant machine - so the board never "sees" the cells get disconnected. Might be easiest to solder the benchtop power supplies to the board's cell sensing terminals directly. Or just not do this at all because it's an effing nightmare.
      Anyway, enough mind vomit. Awesome job with this overall.

    • @davianceable
      @davianceable 2 года назад +2

      @@FalconFour mine just did ,out of 2 cell one of it gone bad first ı tried to revive it with bench power supply but it wasnt holding charge ,so ı removed it change it with 18650 battery with it's own controller circuit and that error message all the pins are there but like u said damn eeprom know it now ,and back then ı charged all the cells to total of 8 volts and tried on camera it didnt want to charge that pack already marked bad.

  • @walkingcontradiction223
    @walkingcontradiction223 3 года назад +24

    Yeah, NOS of batteries are almost always a no go. Lithium batteries are very dangerous to mess with, I've had a few fires myself. Always enjoy your videos. Stay safe from Skyway.

  • @eDoc2020
    @eDoc2020 3 года назад +10

    Regarding these old generation InfoLithiums specifically, I've found my camera will work if you keep the original board for its ID chip. Disconnect the cells and put your own power source in parallel with the board's output terminals.
    I pretty much agree with you regarding Li battery safety, however I have had success very carefully soldering to prewelded tabs. One thing to mention is always discharge the cells to 3.0v or so if you can before doing this as it should greatly reduce the chances of an incident.

  • @mikeymike437
    @mikeymike437 3 года назад +9

    Costum adaptor projects like that are where 3D printers definitely came in handy 😇

    • @nickwallette6201
      @nickwallette6201 3 года назад +16

      Absolutely! With this project, I definitely would've taken an afternoon to measure the heck out of each battery type and the charger, spend another day or two modeling an adapter in FreeCAD, spent another afternoon making an adapter PCB design, ordered a bunch of pogo pins and stuff from Digi-Key, then never actually finished the project.

  • @jddes
    @jddes 2 года назад +3

    As a sound technician, gaffing tape is amazing. Almost as strong as duct tape, super easy to shape and tear with a knife, no residue for temporarily hanging cables. Made by professionals for professionals

  • @lemagreengreen
    @lemagreengreen 3 года назад +4

    That MiniDV mechanism is just a testament to late 90s/early 00's Sony engineering, beautiful.

  • @patrickdube6716
    @patrickdube6716 3 года назад +4

    This has been a treat to watch you dissassemble and NOT catch fire. I sure was ready to see the ethernal flame pour through though, but I'm glad it did not. Precise work with regular tools! I'm hooked for more videos!

  • @kargaroc386
    @kargaroc386 3 года назад +13

    CRD: You should never do this its so dangerous
    BigClive: Lets hack open the cells with some wire cutters, what could go wrong

  • @BrianKapellusch
    @BrianKapellusch 3 года назад +49

    Just create a new battery pack by combining elements from the earth.

    • @AlRoderick
      @AlRoderick 3 года назад +13

      Fly to Bolivia in a pandemic? Are you mad? Better to grind up someone's antidepressants.

  • @rdc2298
    @rdc2298 3 года назад +3

    Gaff tape is designed for temporary use. It does stick pretty well over the long term (the glue will dry out and get crusty eventually). But the "residue free" nature that you mention goes away the longer it is left in place. I'm talking like months to years here, not days.

  • @jonathanschober1032
    @jonathanschober1032 3 года назад +13

    You do your electronics projects just like me. I love it

  • @jacoblieberman5138
    @jacoblieberman5138 3 года назад +5

    Awesome video! Loved every minute of it, especially since I've tried replacing the cells in an infolithium and it's a nightmare..

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +2

      it's so awful, haha. Thanks for watching!

  • @emmeryncariglino4983
    @emmeryncariglino4983 3 года назад +7

    what was weird is i pulled this video up when it realeased and wondered how I already had a six day old comment on it and I'm like, oh, I said that during hte patron-only preview period!
    the liminal message of this comment is to give CRD money on patreon.

  • @RetroGadgetMan
    @RetroGadgetMan 3 года назад +2

    Great idea with the paper clip. I thought it may be show over when the cam refused to work with the none Sony battary. Incidentally, I just bought this camera and amazingly the long life battary still works!

  • @danandrei96
    @danandrei96 2 года назад +2

    for what it's worth, there are little portable spot-welders meant for building/refurbing small 18650 packs and they work a treat. I got a cheap one from Amazon for around £20 and used it to rebuild both the 6cell and 9cell packs for my laptop, so it was well worth the investment

  • @marksuper4920
    @marksuper4920 3 года назад +2

    Great job! I would have spent a few days trying to design an adapter for my 3D printer, failed a few times, then gotten bored and put everything in a box never to be looked at again. Your method is way more effective!

  • @CalebFrey
    @CalebFrey 3 года назад +1

    The matte black gaffer tape makes the final product look surprisingly good.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +2

      right??? it doesn't look trashy like duct tape, it looks (and feels) pretty nice!

  • @ajroach42
    @ajroach42 3 года назад +3

    I really appreciated seeing this, thank you for sharing.
    I've done similar projects in the past, and would not have considered the paperclip trick or the fabric tape. Thanks for the tricks.

  • @DiThi
    @DiThi 2 года назад +2

    You should also mention that fire extinguishers don't work on lithium batteries unless they're specifically made for that purpose. They just burn until depletion.
    I have a friend that made a whole battery pack of 20 cells by soldering them, but he needed to use an iron that could heat up fast, with a flat tip, and with plenty of flux. That can't be used for rebuilding because it wouldn't fit the case. While it's not something I would recommend doing, that pack still works perfectly, comparable to all the ones they made with spot soldering. And the multiple fires he had at work were not from packs he (or his coworkers) made.
    By the way, this kind of adapters would be probably best if we can make a design to be 3D printed.

  • @siberx4
    @siberx4 3 года назад +1

    Absolutely incredible to me that the InfoLithium signal is cross-compatible across different battery form factors. That seems like exactly the kind of thing that they'd flip a few bytes around for no reason other than a different guy was working on that particular InfoLithium form factor and they never conceived of anybody attempting to adapt batteries in that way.
    If you have two pieces of plastic you need to combine like that, one approach I've used with success (ideally if you know they're both ABS, although you can often mix/match) is to get some 3D printer filament of an appropriate plastic (ABS/PETG/Nylon/etc, depending on the base plastics) and an old junky soldering iron tip you don't care about. Use the filament like a "welding rod" to fuse the two pieces of plastic together into an appropriate configuration. You can't easily take them apart, but the results are generally strong/permanent and don't look _too_ bad if you're careful about how much of the plastic you touch/melt/fuse with the iron.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +2

      The reason I didn't join them permanently is because I don't want them to be permanent - someday these solder joints will break, probably someday very soon, and tape is much easier to remove.

  • @neckspike4554
    @neckspike4554 10 месяцев назад

    My dude I love watching you go on exactly the "shit I need to fix it" missions like this that take grip of my brain

  • @ziginox
    @ziginox 3 года назад +3

    Loved the long-format workbench video, it's been too long since we've had one of these!
    And for Sony's sake, get yourself some liquid or paste flux to take care of those cold solder joints!

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +2

      Thanks! I use flux for board work but rarely take the time for stuff like this, though I know I should.

  • @SomeBorkedAccount
    @SomeBorkedAccount 3 года назад +2

    *moves Dremel into frame*
    "Let me justify this"
    This was a really clever mod, and now I have a potential use for all the cheap-o chargers I'm too afraid to plug in... (at least a safer* alternative to my spot welder exploits...)

  • @funksterdotorg
    @funksterdotorg 3 года назад +5

    That tape is premium fancy.

  • @frazerx01
    @frazerx01 Год назад

    0:16 - "If you're seeing this at all, than it means it probably succeeded, or that it was catastrophic"
    After seeing the first few seconds, it was probably the latter. I really enjoy your videos. Informative, entertaining (getting knowledge is nice and all but these are fun!), well shot and just very well made!

  • @Just.A.T-Rex
    @Just.A.T-Rex 3 года назад +1

    I like everything you do! I hope to be able to bump up my tier level on Patreon in the coming months as well. No ads? Quality niche content? Relatable humor? You’re a gem. Thank you CRD.

  • @dudepersonvids
    @dudepersonvids 3 года назад +2

    Gaff tape is great stuff - I used some just today actually on a shoot, when I forgot a lens adapter ring and just taped an oversized filter to the front of my lens!

  • @SRQmoviemaker
    @SRQmoviemaker 3 года назад +1

    This is the kind of stuff I love to see! I'm a huge fan of making what you have work.

  • @martinbisanz9284
    @martinbisanz9284 3 года назад +16

    yay, proprietary power connectors are just the best /sarcasm

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +13

      I wish the EU had mandated barrel jacks in like 1978 so it would have been most cost effective to just put them in everything worldwide

    • @NJRoadfan
      @NJRoadfan 3 года назад +2

      @@CathodeRayDude Whats weird is that Sony is usually pretty good at using the same AC adapter plug across devices. ie: just about every HandyCam uses the same AC adapter and things like Walkmans and Discmans all use the same style/voltage barrel jack.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +2

      @@NJRoadfan right! I was honestly shocked when this *didn't* take NP-F and *didn't* take the weird "flat bar with wings" sony PSU.

    • @eDoc2020
      @eDoc2020 3 года назад +1

      @@CathodeRayDude My DCR-TRV310s use the regular InfoLithium L but the Sony adapter I ended up buying used a slightly different plug variant which didn't fit. Fortunately I was able to take a piece of scrap PCB and make my own compatible connector. Obviously this technique would not work in all cases.

  • @tituslafrombois1164
    @tituslafrombois1164 3 года назад +2

    When I need a weird power adapter for a camcorder, I visit a site like ManualsLib, find the manual for the camcorder, and usually within the "included accessories" list near the front they give you the model number of the AC Adapter, which I can then plug into eBay and usually find what I'm looking for.
    I've also used this method to track down the exact right remotes for several video decks.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +2

      Yeah, I've done that sometimes but I have mixed luck with it.

  • @ChocoHearts
    @ChocoHearts 3 года назад +4

    "I'm no Ben Heck," he says, while his cat distracts him.

  • @drasco61084
    @drasco61084 3 года назад +3

    I always think of ABS plastic as dusty crusty so makes sense to use a cutoff wheel. It's not like polypropylene.

  • @EilonwyWanderer
    @EilonwyWanderer 3 года назад +2

    Definitely looking forward to more of this type of video! All your content is great. This inspires me to get around to a few projects I've been putting off (re-capping my C-64, reconnecting some ribbon cables inside a monitor I previously repaired, and a few things I need my off-brand Dremel for) so that's a double bonus!
    Oh and hey, good job using a paperclip in a way that works, and on something that doesn't matter if it ends up dying... certainly better than exploding a historically significant museum piece with a paperclip :P

  • @lifetimeofworktodo
    @lifetimeofworktodo 3 года назад +3

    I love this kind of retrofitting. I migrated a DJI phantom 3 to a new chassis and had to 3d print GPS mounts and legs and shit. In the end, the BMS system was too hard to bypass and I just ruined two of their BMS boards. Got nice unmanaged LiPO packs to deal with now though 😂 good video man

  • @se7enity648
    @se7enity648 5 месяцев назад

    Excellent video. More videos like this and thrifting videos would be very much appreciated.

  • @dark2koneko
    @dark2koneko 3 года назад +1

    I'm kinda new to your channel and everything I've watched so far is fascinating. I personally don't very much care about camera tech, but I can listen to you nerd out about it endlessly. Your presentation is great and it's clear that you care immensely about whatever you talk about.

  • @IJDM
    @IJDM 3 года назад +1

    If I am not mistaken, this was the cam used on Stargate SG-1 by the Daniel Jackson character in first few seasons. Also check out the Sony CCD-SC55 (also the SC-65) very interesting cam resembling close to the Mavica Floppy disk camera. I covered that cam a while back, this video reminded me of all the issues I had trying to get it to work properly!

  • @nickwallette6201
    @nickwallette6201 3 года назад +1

    Man, I really felt that wire rant.
    "Most of the stuff on Amazon is basically fraudulent." As is the case with _any_ category of product on Amazon.
    "If you go to website like Mouser, you can buy wire there ... and a lot of it is incredibly expensive." Would you like the 100' spool? Or the 1000' spool? The price is "WTF!" per linear foot for the 100', and "Geeeeeezzzuusss.." per linear foot for the 1000' spool. Would you like nylon braided wrap? That's only "What! HOW?! When did Nylon become a rare earth material?!" per linear foot.
    Do you need some connectors? Probably should consider the special crimping tool, with an assortment of die sets. Complete kit for the low price of "This is a small country's entire GDP!"
    I encourage anyone to go quote the BOM for any small community-produced electronics project product / kit, and then complain out loud that "it should only cost like $30 for this."

  • @RandomMan1
    @RandomMan1 2 года назад +2

    For basic project wire, you want 22AWG, stranded (7/30 aka 7 wires at 30AWG), tinned/silvered copper wire. Any insulation is fine.
    For small repair (aka bodge) wire you want 30AWG solid tinned/silvered copper wire with Kynar/PVDF insulation.

  • @dustinhanlin
    @dustinhanlin 2 года назад

    I've never seen someone who seems to hate the word "just" as much as I do. This is surprising and refreshing.

  • @hey.its.BrandishJaye
    @hey.its.BrandishJaye 3 года назад +5

    More bench vids, please! Though I do love the narrative vids, too.

  • @Palmtop_User
    @Palmtop_User 3 года назад

    As a person who loves using mavicas im delighted to hear that their batteries became a standard in other devices still used today, from china no less. This to me means usable low cost batteries are readily available that arent 15-20 years old

  • @Steets
    @Steets 3 года назад +1

    "If you're seeing this, it means it probably succeeded, or that it was catastrophic in an entertaining way".
    Oh, I am _so_ stealing this.

  • @patagonaa
    @patagonaa 3 года назад +5

    6:50 "If I short these ends here this will explode and start a fire"
    [literally one minute later]
    *sticks battery in an adapter with bare wires and flails it around almost shorting it out several times*
    :D

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +8

      that's a finished pack with charge and discharge control circuitry though, not a bare cell! all the same yeah I hadn't intended that lol

    • @patagonaa
      @patagonaa 3 года назад +1

      ​@@CathodeRayDude depending on the circuitry it might still blow a fuse or a transistor (or pcb trace) up, but i guess it isn't much of a "blowing up in your face"-risk as the bare cell

    • @eDoc2020
      @eDoc2020 3 года назад +1

      Protip: you can make the two wires different lengths so accidental shorts are much less likely.

  • @ecnepsnaiold
    @ecnepsnaiold 3 года назад +5

    GIBBS! HE'S BACK (AGAIN)!

  • @sibertigers1138
    @sibertigers1138 2 года назад +1

    I worked for Sony back when this camcorder came out. I own a later model, the DCR-PC100. It uses the NP-FM50 battery. I never realized just how few cameras used the NP-F100/300 battery. There were only 2 models that did. DCR-PC7 and DCR-PC10. They definitely are next to impossible to find. The rest of the DCR-PC models seem to use the NP-FM series battery, which is still pretty easy to get. Good little converter there.

  • @Matthill121
    @Matthill121 2 года назад

    Im sure you've gotten a comment like this by now seeing as the video is several months old, but using a razor blade to trim off the little chunks of excess plastic makes for a pretty smooth start before sanding. Loving the videos :)

  • @idjut1080
    @idjut1080 3 года назад +9

    This guy knows. Batteries are a roadblock from getting anything done with your home video.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +7

      It's so frustrating, I have probably 50 camcorders and maybe 5 can be used in the field

    • @nickwallette6201
      @nickwallette6201 3 года назад +4

      Retro laptops, too. Good luck finding a NEW pack for a Core 2, much less a Pentium III, or a 486.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +3

      @@nickwallette6201 YUUUUP

    • @eDoc2020
      @eDoc2020 3 года назад +1

      @@nickwallette6201 For a PIII and especially older there's a good chance that the old battery is a dumb NiMH or even NiCd. For those you can just pop open the casing and install new cells without worrying about the dangers of lithium batteries. You could even install a holder for regular AAs at the expense of reduced capacity.
      Yes, I watched the video, including the part about the word "just." I haven't fully repopulated any laptop packs myself but I did "fix" a 9 cell (3S3P) Dell by removing the dead section and taking one cell from each remaining section to end up with a 3S2P which worked fairly well at the time (although the capacity measurement was all messed up).

    • @nickwallette6201
      @nickwallette6201 3 года назад

      @@eDoc2020 No such luck on my VAIO P-III - it's definitely Li-Ion. That's for the best, though. It needs the energy density to maintain a decent run-time.
      But I did RE the power management section of an AST 386 laptop. I'm working on replacing that, and probably the fluorescent backlight since I managed to pull the end of a winding off a pin of the HV transformer. oops

  • @cheeseparis1
    @cheeseparis1 3 года назад +1

    Thanks for this video! If I ever need to work on a battery pack, I'll remember it. This is life-saving advice man!

  • @SilverKnightPCs
    @SilverKnightPCs 2 года назад

    You are exactly the inquisitive side of my brain when it comes to engineering. Love your content. Never give up your love for learning from things.

  • @kelownatechkid
    @kelownatechkid 3 года назад +6

    Watching this video is like sipping a cup of hot cocoa

  • @brookewestonctc
    @brookewestonctc 3 года назад +1

    "oh boy, I'm smart!" just after taping over a battery contact. We've all been there!

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +1

      I feel like the clumsiest oaf all the time with this stuff, haha.

  • @cydonyn
    @cydonyn 2 года назад

    I guess i got lucky, I ordered some copper electronic wire off of amazon, and it came in and worked fine for what i needed it for. I was suprised when you said a lot of the wire on amazon is fraudulant.

  • @robkorczak
    @robkorczak 3 года назад +2

    Fun video. Mostly just commenting for the algorithm but yeah good video I wouldn't mind more like this.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +3

      thanks for the comment! will probably do more soon!

  • @deltacx1059
    @deltacx1059 Месяц назад

    7:05 spot welders work and so does just using spring contacts if you don't have a spot welder. Good application for 3d printing.
    The cells are pretty safe to work with as long as you take some precautions, also in the rare event one does go into thermal runaway make sure to have a large bucket of sand to slide it into.
    And well soldering them is the same story, take precautions and know what you are doing otherwise don't touch it.

  • @MrDsmen
    @MrDsmen 3 года назад +1

    I mean, the manufacturer of the cells says you shouldnt solder them but you can get cells with solder tabs pre-welded, those are extremely easy to use with little added cost if you are ordering from china.
    If thats not an option sand the contacts of each cell, use RA flux and pre tinned "red hot" soldering iron ~400°c, it takes some practice but its very much doable and the packs I made work well so far and I'd even argue that soldered packs are better at supplying high currents >15A these are my two cents nobody asked for :D
    I kinda always wondered if those "block" infolithium packs used regular 18650s or something else and lastly, picking out wire to buy is always hard, so many options and colors :D

  • @andreasthomsen852
    @andreasthomsen852 9 месяцев назад

    might be 2 years late to the party, but like I love this solution, defently the way to go, after having done quite a bit with 18650's and flatpacks, making custom packs and that, and seen them blow up and explode on the field. I normaly tell people: "If you need to ask how to work with the batteries, then you should not even try" atleast not without someone who has done it before arround. It's so easy to punture or short one by acident if you just zone out for 1 second.

  • @voceyc
    @voceyc 3 года назад

    I got one of these camcorders, I already had a dual sony charger but the battery pack was totally dead. I managed to get a genuine Sony battery on eBay thst was used but working. The battery is perfect and works like a treat. The camera function does bot work but the play back is perfect 🤩

  • @Crobisaur
    @Crobisaur 3 года назад +1

    Glad you got it with our best pal gaffer tape

  • @EvilCoffeeInc
    @EvilCoffeeInc 3 года назад +1

    I'm with you on buying wire. I ended up using threaded wire to (unsuccessfully) build a guitar pedal once because I couldn't find solid core wire online anywhere, and "kynar wire" is a colloquial term that storefronts don't seem to understand the way engineers do.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +2

      It's infuriating, right?! The world of commerce has been broken so badly that we can't even buy *wire* anymore!

  • @vacuumit360
    @vacuumit360 3 года назад

    Don't know how I missed this one. PFE. That's good out of the box thinking, the fire potential makes it even more on edge. Many thanks.

  • @rougeneon1997
    @rougeneon1997 2 года назад

    Correct on not soldering those. You are 100% rite on using a spot welder. I make long range, endurance battery packs with those 18650's for my rc, fpv, airplanes. 4 cell and 3 cell BUTTTT I do solder them AND I HATE every second of it! I certainly know its butt puckering.

  • @garbleduser
    @garbleduser 3 года назад +6

    Hey! Where can I send you some hyper specialty wire? It was used to power an artificial heart. Not a joke, I service LVAD power systems.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +4

      holy crap hahaha, okay, that's appealing - what kinda specs are we talking in terms of gauge here

    • @garbleduser
      @garbleduser 3 года назад +4

      @@CathodeRayDude I cant remember the gage and it's not printed on the cable. It has LOTS of Teflon coated conductors. 4 current carriers, and almost as many signal wires as there are wrong answers to the fire marble puzzle in Riven. It has a woven steal shroud like a Chinese finger trap. I have a bunch of these that I scrap cable from. Let me know where to send it!

  • @Thanos.m
    @Thanos.m 3 года назад

    My dad has a similar sony mini DV that filmed most of my childhood but I think it was a fancier model that took normal infolithium batteries I also remember it had a touchscreen which fascinated me

  • @Diedonacagedworld
    @Diedonacagedworld 2 года назад

    JUST! keep making these awesome videos. thanks for the few hours of enjoyment. very knowledgeable!

  • @IrWayZ
    @IrWayZ 3 года назад +1

    It's only worth getting the welding tool for batteries if your doing laptop or electric skateboard packs. Sometimes even a very fast solder of the battery wont result in fire but will result in a dead cell anyway. There are also options for non-weld solutions for batteries if the compartment size is't a concern.

  • @imissmypencils
    @imissmypencils Год назад

    Very cool! I find these cameras often but the local thrift stores still want $100-200 for camcorders that only work when plugged into a socket. I’d definitely invest in one if I had the ability to DIY a battery adapter for them.

  • @markmuir7338
    @markmuir7338 2 года назад

    I started to use 3D printer filament and a soldering iron to join random bits of plastic together and fill in gaps. You can also get hand-held pens for this purpose too, which make a prettier job of it. The end result can look pretty good too, depending on how good you are at sculpting!

  • @RealLatinGeek
    @RealLatinGeek 3 года назад +1

    Very cool! A rare case where 3D printing would have a purpose, but I like how you managed it with what you had around and came up with a solution that does seem sturdy enough for recording in studio or even light location settings.
    I dream of li-ion packs with a little door on the end, like many compact cameras have for their AA batteries, but for fresh 18650s. I know it's totally ridiculous, but it would make using old laptops and cameras a lot more enjoyable...

  • @KrazyKaiser
    @KrazyKaiser 3 года назад +2

    Pretty clever fix at the end there dude!

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +3

      thanks! I was impressed by my own accomplishment hahaha

    • @KrazyKaiser
      @KrazyKaiser 3 года назад +2

      @@CathodeRayDude "Looks like you are trying to repair a battery-picky camcorder. Would you like some help?"

  • @brandonupchurch7628
    @brandonupchurch7628 2 года назад +1

    several years ago I opened up a Toshiba Libretto battery, and it used 17670 cells instead of 18650 and as compact as it was it was pretty much not able to take 18650s in the shell and 17670s have pretty much been entirely replaced by 18650s.

  • @Megabean
    @Megabean 3 года назад

    I love that all my camera gear like lights, monitors and recorder uses that old sony standard. I got about 25 of those batteries and 10 chargers. It's hectic charging things before a shoot (I am a videographer) but its so convenient. I even looked into getting adapters for my Sony Alpha cameras just because.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад

      hahaha, I love doing the math on that - at MSRP that's a *bare minimum* of $2200 of batteries, and I bet you spent considerably more. The idea of *thousands of dollars of batteries* is incredible to imagine, even though it makes perfect sense.

    • @Megabean
      @Megabean 3 года назад

      haha most of them I've collected over a long period. Half of them are just chinese ones that came with gear. Don't even get me started on the gear though, now that's a price I don't want to calculate at this point. :P

  • @compu85
    @compu85 3 года назад

    I bought a cheap Amazon battery tab welder last year... it was a fantastic idea. I've redone several laptop packs with no explosions. The extreme frustration of trying to work with lithium packs is reduced to "Ah I'll just go zap, zap, zap, and I'm done!".
    If you have a fair few packs to go through, it's worth the $200 in reduced aggravation alone!

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +1

      Yeah that's part of the problem, I only want to do this once in a blue moon.

    • @compu85
      @compu85 3 года назад

      @@CathodeRayDude Don't blame you. It's still a pain.

    • @pghcoyote
      @pghcoyote 3 года назад

      I'm sure there are a lot of people (me included) that will buy a specialized tool/equipment that might only see a few uses. While it might totally negate any cost-savings of repairing an item, it's worth it to more easily repair said item, especially if just fixing something is a joy. Similar to "I'm not sure which of these will work, so I'll just buy all three!"

  • @noberet
    @noberet 10 месяцев назад +1

    Electronics wire source: Van from junk yard. The harness(es) that go from the fuse panel to the back are full of multi colored wires.

  • @SnekInASuit
    @SnekInASuit 2 года назад +2

    I was immediately laughing the moment you said you didn't need the data pin, and that you hadn't seen a camera that needs it yet. I work in a small film studio where we also do old media conversions, and I've had some frustrating times with cameras that will even reject third party infolithium batteries. The truth about it is that sony absolutely used infolithium as a sort of DRM system for a time. I'm not entirely sure what time period, or for how long, but I assume they backed off on it at some point. It's just incredibly funny to see this was your first run-in with that.

  • @GamingPsychologist
    @GamingPsychologist 3 года назад +3

    Really enjoyed this. Actually learned a couple of things for my own future DIY projects, and you're the first person I've ever seen actually use Gaffer tape. I've heard about for ages but never seen it used like this.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +4

      I just got some on a whim and I'm in love with it, can't recommend it enough for everything

    • @CathodeRayDude
      @CathodeRayDude  3 года назад

      @@orismology Pro-Gaff, I believe, I got it from B&H

  • @leebee1100
    @leebee1100 Год назад

    This is awesome!! Great job! I love the creativity. Very interesting !

  • @josuelservin
    @josuelservin 3 года назад

    By all the gods what a wonderful and wild ride this was! The gaffer tape was just a lovely touch of jankyness 😆

  • @lozdyck8155
    @lozdyck8155 2 года назад

    Interesting. In the broadcast industry, I've always heard these called "L Series" batteries. I didn't know much about them, cool video.

  • @Ineedanameplease
    @Ineedanameplease 2 года назад

    I’m terrified of messing with electricity and batteries and such, but this so cool and such a great DIY fix

  • @rasmysamy2145
    @rasmysamy2145 3 года назад +1

    As someone who rebuilt these, it's really not that hard.
    If you're scared of the cells, discharge them before hand, they won't catch fire then, just offgas then trip the protection.
    Also it is safe to solder them if you know what you're doing. The rule is that you shouldn't get the battery core over 70C no matter what. So discharge the batteries first, get a soldering iron with a very large thermal mass at 300C, and low temperature solder, then solder away. This is difficult and takes a long time which is why welding is preferred, but it is possible to solder them. Worst case is that the batteries lose some capacity.
    Also get those Sanyo cells out. They're known as 'heaters' because, well, they heat up. Get some LG, Sony, or Panasonics.

  • @Aaron48219
    @Aaron48219 3 года назад +1

    My Canon cameras are notorious for not liking batteries without the data signal.
    For projects like this, use a 2 part epoxy (putty) for attaching both halves together and closing gaps. It can be sanded so it looks decent too. Will also hold paper clips in place on plastic better than a cyanoacrylate glue.

    • @CathodeRayDude
      @CathodeRayDude  3 года назад

      I really do need the epoxy on hand for the latter use, but I prefer not to permanently seal projects like this because my solder joints WILL break and need repair

  • @sergiofagundes1972
    @sergiofagundes1972 3 года назад +1

    You can make something more permanent using cyanoacrilate superglue and baking soda. It makes a solid plastic joint and you can file and paint it doing a pleasant job. I even fixed a pressure sensor using this to "solder" the cap of the sensor.

  • @the-shork
    @the-shork 3 года назад +1

    Didn't expect a 30 minute workbench video to be so interesting! I'd watch more of these
    I know it's probably awful for sound while filming but please get yourself a solder fume extractor

    • @CathodeRayDude
      @CathodeRayDude  3 года назад +1

      I have one, and for serious projects I use it, but for touching three or four joints i often don't bother because it's so huge and I have to position everything around it. I don't mind the sound.

    • @the-shork
      @the-shork 3 года назад

      @@CathodeRayDude ah, fair