Dan Wesson 715 .177 Pellet & BB Co2 Revolver Overview CSS
HTML-код
- Опубликовано: 25 авг 2024
- Dan Wesson 715 .177 Pellet & BB Co2 Revolver
www.surplusstor...
Available in Pellet www.surplusstor...
Or BB www.surplusstor...
Rifled inner barrel (pellet version only)
Rear loaded full-metal cartridges (Pellet version)
Unique front cylinder release latch functionality
Houge® imitation rubber grip design with embossed DW logo
Precise drum lock design
Discreet safety switch
Integrated tool for tightening CO2 cartridge
Smooth trigger pull
Rough patterned hammer design for improved thumb grip
Fully licensed by Dan Wesson, CZ-USA
Includes a speed loader and six cartridges.
For more information please click here...
www.surplusstor... 
Спорт
Fine informative video. I bought the black 8" barrel pellet version: highly accurate, relatively quiet, front-heavy (understandably), rather low-powered. Terrific-looking beast, lots of fun. I don't use the loader, found it rather fussy. I bought loads of extra shells to keep loaded, as it is time-consuming to load pellets into the fronts of the cartridges.
You really need more subs..very professional👌
love the shades
Which pellets did he say fire between 480 and 510 fps?
Good video
Question is the 715 a rifled barrel?
is it more powerful than the Crosman SR375?
Can you use the pellet cartridges in the bb version, are they interchangeable?
Continuous shot capecity of Pellets ?
Can I shoot pellet with pellet cartridges with the bb version pistol
fired like 4 gas cylinders in it and it broke. the firing pin is missing and the hammer spring that returns the hammer is broken. resist spinning the cylinderbas youve seen and will want to...the piece screwing that in becomes unscrewed NON STOP. i figure a drop of superglue can fix that but still. quiet gun that seemed to pick up in power closer to its demise.
Great video 👍 I bet you regret getting the fear factory tattoo now tho 😂🤘
I have the 6" pellet version, beautiful gun, only had 1 co2 cart through it and up for sale due to lack of use. I'm in Leicester UK, prefer collection from my home or will deliver within a 25 mile radius. Other pistols and rifles also for sale for same reasons.
But what is the price?
£140 ono not a bad saving on new, got it from here www.solware.co.uk/dan-wesson-715-6-inch-grey-steel-pellet-version
I'm 80 miles away, I don't know if I like the cylinder release on this model. It looks a lot better than the normal version though.
I've changed my mind, it's a gem. I'd buy it if I were closer.
give me a call on 0116 2613277 and i'll sort it for you, only phone before 1pm
Will the bb version fire pellets?
Do they differ anyhow - the BB and the pellet versions? eg. Am I able to buy the pellet version and use both sehll types in it etc?
Thanks for a great overview. I've been looking to add the 715. 6" pellet version to my collection.. it would be brill to have one in the steel/nickel finish. but it appears it only comes in the grey steel finish... smk/asg. please help!.... thanks again. regards Dave..
I have just bought one of these the 1.77 version which is really nice.The one thing I have noticed is every now and again the hammer is a bit stiffer than normal to cock hopefully this is not a sign of problems to come.
TheSilverback1967 shouldnt be...use a drop of pellgun oil on top of the co2 every load
Thanks for the review, guys!
Been looking all over youtube for a review trying out different kinds of ammunition with the DW 715 .177 pellet version; since you load the shells from the rear, you theoretically should be able to fire .177 (4,5mm) feather bolts too, right?
I would love for you guys to maybe do another quick review testing which kinds of ammunition aside from the obvious .177 pellets will work with the 715... .177 steel BBs shouldn't be a problem I reckon, but I'd especially like to see if/how well it performs with bolts.
Cheers!
In theory yes you could fire the darts from it, but most of them are steel so are much harder than the lead ammo it's designed to fire and can damage the rifling in the barrel, the same with the copper/steel BBs.
Do you know how to fix a co2 gas leak in the gun
Do you guys deliver to Cornwall, I picked up this gun last week and it’s amazing but it was local shop with less stocked weapons
nice! could you get me a 8 inch one in stock please and the 24 pack of shells with the writing on the bottom
Great review. Are the speed loaders for these all the same? ie would the same speed loader work on both models? Thanks
Hello
You mentioned the pellet on video that would give you over 500 fps.. can you give me the link herd to order or the name of pellets please. Thanks
I have owned a Colt 1911 and Smith 686 pellet guns for quite some time. They are both made by Umarex. But they both have had their share of problems. Who makes these Dan Wessons? Surely not CZ.
+Merlin K. ASG.
+Merlin K. They are ASG branded but I believe the original manufacturer is Wingun (that's not definite, but it's an educated guess.)
Please reply. What happens if i put a pellet in the bb gun's bullet? Will it screw my gun or not shoot it? What is the difference between the guns? If i get the pellet loading bullets will i shoot them with bb version?
Oscar Patino you can shoot the pellets out of the BB gun with far less accuracy as long as you have the pellet shells and you can but shouldn’t shoot bbs out of the pellet gun because bbs are harder than pellets and it can mess up the barrel on the pellet gun.
Oscar Patino I don’t know if you can I heard somewhere that you couldn’t but I’m not sure mine is getting here in a couple of days.
Uhm - why don't you show the shooting results? Especially the difference between pellets and BBs...
Unfortunately we only have a five meter range so it would be hard to show you the true difference between the two ammo types. I hope you eventually found the information you was looking for, have a great day!
@James Shackelford Hi, We are in the UK...
I'm looking to get the newer Dan wesson, 715 - 4" barrel.
Does anyone know of any good power mods for it??
Many thanks
Hi. I've just bought Dan Wesson Pellet 8" but it's faulty and I have a choice - replace it with a 6" version immediately or wait 3 weeks for a working 8" . Could you answer me which one is more powerful and accurate? the Internet states that on paper 8" is better but some reviews say that 6" is actually more accurate? help me
Jake Marshall longer barrel should be more powerful and easier to aim but once a bullet/pellet has caught the rifling, it's on its course regardless of barrel length. I've seen people make 100meter shots with a .22lr Derringer before. IMO, 6" is plenty. My only co2 gun is a single shot Benjamin .22 with a 8-10" (I think.. it's in another state. ATM. It's an eb22). I was pretty good with it up to 50 meters. Fwiw, my largest handgun has been a .357mag with 4" and im ok with it to about the same range.
I know this post it old but skill is key with accuracy. Longer barrel just gives a better sight picture.
What is it's maximum effective range for plinking on a man size target? Can it hit a man size target at 50m?
Yes. Yes it can.
What is the frame size comparable to? N?
how much shot per co2
Hi do I need to buy a hole Dan Wesson 715 for pellet
or i only need to change the cylinders from bb to pellet cylinders?
Thx
Hi, You would have to at least change the barrel, the BB version is smooth bore, the pellet version is rifled, I haven't tested trying to fire one through the other, but I wouldn't recommend it, Steel BBs can damage the rifling of the barrel and pellets need to spin to be stable in the air.
Tl/Dr, I recommending getting a different pistol for each, you'll get better results and you won't risk damaging your pistol...
Im concerned about bying a DW or Colt python especialy when it comes to weight ... the DW 8" which is longer barrel had about 1 kg and the Colt Python 0.357 i have in my store only 6" still it has 1.120 kg ... does DW has some inner plastic parts ?
The DW 715 is not available in 8", those are the older models with the decidedly worse grip/CO2 cartridge design.
The DW 715 6" weighs in at about 1.2 kgs and apart from the rubberized grip covers, safety switch and sights should have no plastic parts whatsoever - it is a full metal revolver and looks to be 99% identical to the actual .357 firearm.
i thought the bb version was more powerful
Can u mount a rail on it
can you shoot bbs with the pellet version? (using bb shells)
+Carlos Valencia I wouldn't recommend trying it, the BB version has a non-rifled barrel and the pellet version has a rifled barrel that can be damaged if you drop a steel BB through it...
@@surplusstore what if it is all the way around? can I shoot pellets with bb version? cuz bb version is all I can get in my stupid country =(
Lucifer Amenuel yes but with far less accuracy
Where can I find a replacement hammer spring for the ASG Dan Wesson 715 (.177 Pellet)?
Hi, Give us a buzz in the shop and we'll see if we can get one direct from ASG.
Regards,
The Surplus Store Team.
Can I buy the blue gun from you?
Hi can you get proper wooden replacement pistol grips for these as i don't like the real wood look alike plastic ones.
Hi We can't, but I know there are people out there that do custom make real wood grips for a range of Airsoft and Air Weapons...
Regards,
The Surplus Store Team
Crawley Surplus Store hey is loud enough to disturb neighbors?
I really don't like that brownish-grey finish. I would have bought myself one for christmas had it been available in black or silver. Damn this looks like a cool gun but I'd get eye cancer from looking at it.
Hi mate, is possible to convert BB DW into Pellet shooting?
I wouldn't recommend it, here's a copy/paste of an answer from a while back...
You would have to at least change the barrel, the BB version is
smooth bore, the pellet version is rifled, I haven't tested trying to
fire one through the other, but I wouldn't recommend it, Steel BBs can
damage the rifling of the barrel and pellets need to spin to be stable
in the air.
Tl/Dr, I recommending getting a different pistol for each, you'll get
better results and you won't risk damaging your pistol...
Is it possible to damage the cylinder if you flick it into the gun?
i wouldnt think so but i have heard that with the older ones you could so theres always that chance
Its unlikely you'll damage the cylinder but we wouldn't recommend doing it on a regular basis as this may start to wear the catch. We did it because it looked cool :) Have a great day!
Yes, gunsmith here. I have lost count of the costly repairs that I have had to do over the last 40 years due to "hollywood" style snapping the cylinder into the frame with a flick of the wrist. It is the best way to bend the crane on ANY revolver, yes even high quality magnum revolvers. NEVER DO THIS TO YOUR WEAPON.
How or where can I get a couple of the clear plastic pistol display stands?
they have them on ebay
+Jim Jacobsen If you haven't got yourself sorted already give us a buzz, we can get them for you...
have they fixed the Dan wessons loose hammer problem
no. i have that issue along with several other issues that rendered the gun inoperable after just like 4 gas cylinders. doesn't seem to leak tho...irs been broken like ten months and the last co2 i put I there still hisses angrily if i threaten to release it lol.
Dee Pee why didnt you get it fixed or replaced
Actually u just reminded me 31 weeks later to check and see if the gas is still in there over a year later. I just found the 4 i ch version ill buy then send this one back for repair.
@@idontknowyou876 You can't Zero parts support. Dead links to US web site. No return phone calls. Dan Wesson has no affiliation to these guns. Now I did not try UK web site so. From the UK a four dollar part will cost 50 bucks to ship.
Where do u buy shells
The internet.
Which one is powerfull ?? Bb or pellets ?
This one here over there.
BB's always hit harder. a BB will go through a tin can shot from a gun that will not put a pellet through the can.
Hi I'm from the future
Dan wesson not Dan westin
Shame i had to mute the sound that mucic sucks
I cringe everytime I watch someone close a cylinder like that.
h
So weak tho lol
fired like 4 gas cylinders in it and it broke. the firing pin is missing and the hammer spring that returns the hammer is broken. resist spinning the cylinderbas youve seen and will want to...the piece screwing that in becomes unscrewed NON STOP. i figure a drop of superglue can fix that but still. quiet gun that seemed to pick up in power closer to its demise.
If it only fired 4 Co2s worth of Gas it should still be in warranty (1 year from purchase date). Get it back to the shop you got it from and they should get it sorted under warranty for you...