Precision T Ruler | T Square From Banggood | Cheap Tools from China
HTML-код
- Опубликовано: 22 авг 2024
- Precision T Ruler | T Square From Banggood | Cheap Tools from China
In this video I want to show you a t-square/ t-ruler from Veiko that is sold by Banggood. In my video you will be able to see how this tool is built, what features it has, how accurate it is and if its worth the money.
My video on the Precision Square from Veiko - • Precision Square From ...
Veiko T-Ruler from Banggood - www.banggood.c...
Shop on Banggood - www.banggood.c...
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co....
Shop on Banggood - www.banggood.c...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/...
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/u...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#casualdiy #woodworking #banggoodtools
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.
Nice video. I have the 600mm and very happy with it. One thing that takes a little bit of concentration before you get used to it is with the marking holes. At .5mm diameter they are spaced 2 mm from the next one hence a row of holes for the odd and one for the even numbers. This had me double take a couple of times in the beginning. As for the inacuracy of the .5mm holes it is easily avoided if one lets the pencil center itself by holding it losely while sliding the ruler along so the ruler guides the pencil and not the opposite.
I really like the Veiko products and have the bench dog ratchet clamps, 300mm square and this product also. It is versatile in that you have the choice to fit the T or not and use it as a ruler. I was a bit puzzled by the pen insert too and was looking around the packaging for the rest of the pen. Keep up the good work Thomasz. Cheers 👍😎🇦🇺
Thank you kindly. Yes its a shame they didn't supply the whole pen right? Now I need to find something it will fit in 🤣
Hi Tomasz, great video again. As others have said, it is a T Square and not really a rule so it should be used as just that. Also the benefit of having it in 2 pieces is that if it isn't square, it is easily adjusted to suit, where as a one piece unit if not square is hard, if not impossible, to adjust. I have the 400mm and 760mm versions and think they are great. The most accurate T squares I've ever owned.
That's a valid point with the adjustment👍
The ruler part was to eliminate comments from people asking if it can be used just as a ruler 🤣
Hello! Just received my 760mm version, but it is not a perfect 90. It does have some slack when putting the ruler in the black piece, but it seems that countersunken holes always position the square in the same position, so I can't seem to get the fine adjustment right. Did you have any problems with this?
@@jakalestan5704, I didn’t however my 400mm one was slightly bowed and when I told Banggood about it, they replaced without question. Good luck 😀
Just got my Veiko 760mm T ruler delivered today after watching another review saying how precise it was and not to throw money away on top brands. However after fitting the end to the rule I held my Woodpecker square against it and boy is it out. Over 300mm it is out of square by 1mm ! And of course there is no way to calibrate this, so back it will go to Bangbad as an Imprecise T Ruler. I'm sure some will say this is just bad luck, but I've taken the road before with cheaper brands and should have learnt my lesson.
Unfortunately that's always a possibility with cheap brands, can't compare to woodpecker but that should be the case. You need a mortgage to get a square from woodpecker 😅
I like it Tomasz it's very good value for the price. I don't see any issues about having to assemble it, it helps keep the price down. Good review. Tony
I was bit reserved to it I have to say. But now when I proper use its growing on me 😁
However the precision square from Veiko I got its absolutely fantastic
It looks like a good product for the price.Another great video and this time Pinocchio survived.😂
Thanks, yes it seems to be decent quality. Yes this time he survived 🤣👍
I think your comment about it not being able to be used as a ruler is a bit unfair - It isn't designed to be used without the T piece, otherwise it would have have been called a ruler rather than T-square
True, but it's good to sometimes look outside the box. People find uses for tools that were not "design" to do.
However the true reason I did show that I my video was the fact I'm certain of few questions asking if you can just use it as a normal ruler 🤣
@@CasualDIY that is a good point - people are like that. I look forward to the drillpro version. - I went looking and could only find a drillpro one that looked like it was two parts and had screws.
Anyway I like your vids, keep it up! I like how they cater for the normal person, not the festool diy'er type :)
@@thenarcotk Festool DIYer love that. The only thing I got from Festool is a hoodie which was gifted to my by a friend 🤣
I'm making a project now that was made by one of the big American RUclipsrs with the Industrial DIYer tools🤣
And the purpose of this video is to prove /or not if "normal budget tools" can do the same project with the same outcome/ quality.
Interesting video. Thanks for sharing. I might consider buying it. But I'm not in a hurry, I'll wait for the comparison video.
Thank you. Hopefully it won't be too long👍
Looks like a great tool. Thank you Thomas.
I had a bit of mixed feeling about to start with, but now when I'm using it in a project built its actually very good 👍
Hi Tomasz, great videos and keep them coming as they're very informative. Here's another way of testing if the t-square is square. Cut a board 1-2 centimetres narrower than the square, pick the best edge and with an engineers square mark a line on the edge for the full width. Then using the t-square scribe a line from the line on the edge across one face of the board, turn the board over and again scribe a line from the line on the edge across the other face of the board. If the t-square is square then you should be able to scrive a line using the engineers square across the opposite edge between the two lines on each side of the board. What do you think?
Thank you. Hmm sounds as an interesting process I need to try that out 👍
For fine work, using the holes in the ruler with a 1mm lead would give a 1mm wide line. For accuracy one would need to cut in the centre of the line each time. If this wasn’t done the worst case the error between two cuts could be 1mm which could compound over several cuts. For many projects it may not be an issue, but accuracy is the main selling feature of the the item which suggests it would be used for “fine” work. Your comment about using a 0.5mm lead in these holes and possibly getting a “wobbly” line is spot on. I would think the product could have 0.5mm holes which would reduce the errors. Is there an experiment you could do to assess the errors that could occur?
That's correct, I wonder how much of an impact it would have. I'll add it to my advanced series. Its actually an interesting topic. Thank you. It will be cool to see if it will affect anything in woodworking
Roger, wobbliness could be eliminated by the use of 0.9mm lead refill (1mm is rather unusual). Remember that automatic pencils have a sleeve which in this case, will fit snuggly into the hole.
Hi Tomasz, thanks for another informative video. You mentioned the Drillpro being a single piece but it is in two pieces the same as the Veiko. The Woodpeckers version is also in two parts. I have both the Veiko and Drillpro versions and I must say I prefer the Veiko version. Look forward to more of your videos.
There is a Drillpro that looks bit different and to what I seen on the photos it's in one piece. However I could be mistaking 🤔
@@CasualDIY Hi Tomasz, I think there are some saddle type squares by Drillpro - TS 3, 6, 8 which are imperial and also T50, 60, 100,160, 260 Which are metric but I don't think the metric ones are Drillpro. None of these are as long as your reviewed product though, and I think apart from the smallest they are two piece as well. Hope this helps.
I just had a look at the one I was thinking and scrolled through the photos and found that there are some screws from underneath. That's why initially thought its in one piece. I wonder If I can find one like that but in one piece.
Hi Tomasz was looking to purchase this exact tool but will wait a bit until I see the Drillpro one and see how it compares video good as always👍
Thanks, hope I'll get it soon 👍
Thanks Tomasz, another nice tool from Banggood. I'm still waiting for the 300mm square to arrive 😞
Thank you. Yes thats the main downside, it takes a long time to arrive
Great review, thanks.
Thank you for watching 👍
Hmmm, that looks like an excellent tool to check parallelism of my table saw blade and fence. Interesting.
Hmm never thought about that ( off to the garage to check it now 🤣) thanks 👍
@@CasualDIY you're welcome! Let us know your findings!
@@5084204 I will👍
Brilliant content as usual!!👍
Thanks mate👍
Good video Sir. I NEED A LONG ONE. DO YOU HAVE THAT VEIKO IN 48 INCHES LONG? ( 1200 mm). I m going to use it in Drafting plans and designing works. Thank you
Hi, I don't sell them. Just done an overview of the tool. Please just check on the website. Got a link in the description of my video👍
Thanks!
Thank you for watching 👍
Hi Tomasz another great video, may I ask where you buy your epoxy from and what make is it please. Keep them coming and looking forward to your thoughts on the rest of your Trend products I have used their cutters for years and have never had a complaint. 👍
Thank you. The resin I'm using is from resinpro.eu been using it for few years now and so far had no issues with it. Got a discount code for them. Let me and I can send it to you👍
Been using there cutters for few weeks now and they are scary sharp, nothing like I had so far 😁
@@CasualDIY Thank you for coming back to me Tomasz I agree the cutters are very sharp and I have had the cuts to prove it. Did you mean to say email.
@@CasualDIY Tomasz is this the same resin you use for t track as I plan to follow your pillar drill table video.
@@aeves63 No, it's a different resin. It's just 5 minute epoxy here is a link to it amzn.to/34cp1TZ
Banggood are really competitive but their deliveries are appalling !!
8 weeks for a square ?
Thats the problem, however I think they got a warehouse in Czech, my precision square and the T-Ruler came after about 7 days. I had the option when buying to choose which warehouse to pick, CH or CZ or something like that. But it's not for all the items, I've ordered some t-tracks and they were shopping only from China, although I waited "only" 4 weeks.
The delivery time is CHOSEN BY YOU during checkout. SO if you want it quicker, choose a faster delivery method. Simple.
I actually didn't notice that option. What I have seen is that you can choose which warehouse they are shipping from. I know of three, one in Czech, one in US and China obviously.
Had the T bar not been put below the surface so you could use it as a ruler, then you'd be having to mention that it is hard to get square and moves. Very silly "observation", a ruler isn't it function, if anyone wants to try to use it at such, that's on them, and no place in a functional review.
True, the reason I have put that in my video was that I expected questions "can you use it as a normal ruler" that's all.
Its a t square notba ruler 😂
When you take the T off then what is it? 😅
Thomas very dsisapointed you have sold out for free supplies of tools. get back to woodworking.
I think you miss the point of these videos. I can't afford to buy everything I want to show on my channel. So collaboration with brands are the way to showcase some tools. It gives You as a viewer information about the product, what features it has and if its any good. Potentially saving Your money or making an educated purchase. And all that information is available to You absolutely for FREE. Whereas I have out put a lot of work in making videos for my channel projects, being a one man band. So you can watch all this content for Free. So sorry you feel that way however I see it differently.
@@CasualDIY I would agree with everything you said except that you deleted 2 of my posts which offered a much better professional tool than what you were pushing for very little more money.
That's censorship of info for your viewers that goes against your comments above and doesn't allow for an educated decision.
You should have a permanent imprint stating infomercial in the top left of your video streams.
@@grahambristol2988 I have not deleted any of your posts. If there was bad language, links, hashtags RUclips blocks that automatically. So please don't accuse me of something I have not done. I'll have a look at blocked comments now to see if your comments are there.
I have had a look and did not find your comments in the blocked comments section. I have also not deleted your comments. Are you sure you have published your comments underneath my video? Please try to post your comment again.
Also replying to your comment: "You should have a permanent imprint stating infomercial in the top left of your video streams"
No I should not, each video where I present a product that has been gifted to me has got a notification at the start of my video if you haven't noticed. This is required and sorted by RUclips so if you got issues of how RUclips deals with that then you need to get in touch with them. On each video before it begins I also state a disclaimer that a particular product has been gifted.