Table Saw Basics I Table Saw for Beginners
HTML-код
- Опубликовано: 29 сен 2024
- Table Saw Basics I Table Saw for Beginners
In this video I want to cover some aspects about a table saw. How a table saw is built, how it works and how to operate it safely.
Links to my videos:
- How to tune up a Table saw - • Tuning Up Table Saw Ev...
- Mitre gauge upgrade - • Miter Gauge Upgrade fo...
- Table saw sled - • Table saw Sled for Evo...
- Router table attachment - • Router Table Extension...
Amazon affiliated links with products you may be interested:
UK links:
- Digital angle finder - amzn.to/3vTlSDM
- Evolution Table Saw Rage 5S - amzn.to/35DBK2B
- Bosch Table Saw Professional GTS 635-216 - amzn.to/3hRmzFE
- Dewalt Table Saw - amzn.to/3tIFKGS
USA Links:
- Digital angle finder - amzn.to/3IXtQiQ
- Evolution Table Saw Rage 5S - amzn.to/3sOEB1s
- Bosch Table saw - amzn.to/34paUux
- Dewalt Table saw - amzn.to/3HNEsPX
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co....
Shop on Banggood - www.banggood.c...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/...
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/u...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#casualdiy #woodworking #tablesaw
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.
Links to my other videos that you may find useful:
- How to tune up a Table saw - ruclips.net/video/jYk5DtjDys8/видео.html
- Mitre gauge upgrade - ruclips.net/video/j6xfOscD4oA/видео.html
- Table saw sled - ruclips.net/video/Yf_eO99B1Ug/видео.html
- Router table attachment - ruclips.net/video/YiD4CJ9F0CE/видео.html
I'm already a experienced woodworker but that said, this is a great video for anyone new to it. Your videos are always very informative and clear for people to follow. Well done mate 😁
Thank you kindly 👍
Thanks for sharing greetings from México
Thank you very much for watching 👍
All the best from Poland 🇵🇱
Very informative video. Thanks for sharing. Most of the things I already knew. Unfortunately my table saw has a rip fence which does not go all the way to the back end.
I'll have to live with that. Thanks for the link to the video How to tune up a table saw. I missed that video when you released it. I'll watch it later this evening or at the weekend. I need to make some adjustments and with your guidance it'll work out better.
Thank you for watching.
Hmm have a look if you can make a DIY version of the fence that locks at the front and back. I actually damaged mine and need to have a look if I can fix it or make something to replace it.
Well tuned table saw will give you great cuts but also is much safer to use👍
Hi Tomasz
Firstly, thank you for all the well presented and informative content. I am just starting out my woodworking journey and am finding your videos super useful. As to the choice of table saw, you have convinced me that the Rage 5s is the way to go. However, without your 'tune-up' videos I'm sure I would have struggled and found the results less than acceptable.
May you and your channel thrive, and many thanks again.
Thank you kindly
Excellent video Tomasz, very informative thanks very much
Thank you for watching
Many thanks Thomas for your clear teaching on how to and how not to use the table saw, I am hoping to take possession of a new Evolution Rage5-S tomorrow and in some ways quite nervous about using one for the first time even though I’m coming up to my 70th birthday.. never too late to learn I guess.😂
Never too late mate
Hi Thomas, what are your thoughts on your table saw? I watched your unboxing 4 years ago and you still use the same table saw. Any issues with lifting mechanism, has it ever failed? How's the motor when cutting very thick wood, is it able to cut with ease? The reason for the questioning is Makita MLT100N also has a table saw with similar price where I live but I found out from RUclips the lifting mechanism failed after a while cause of the use of aluminium part. But it has higher RPM and 260mm blades which can be very useful for cutting thick timber. Appreciate it if you can do a re-review video. Thanks.
I've done a re-review video but it's few years old now. However I'm planning a new Video on this saw in September. I've had no issues with it yet which I think its quite good. Nothing broke on its own ( I've dropped the fence and the back clip cracked slightly ) the only problem that I see currently is the price. I seem some crazy prices on the net which reduces the point of getting this saw as if you add bit more money you can get far better quality saw. If you can pick it up for no more than £350 then I would buy it. Anymore and I would consider buying something else. When I got my saw they you could pick them up for £230 on offer.
Very informative Tomasz.. You really went the extra mile with the information.
Still missed some info but the basics are there👍
Thank you for watching 👍
Hello
Your videos on the evolution table saw are great thank you for you projects I do have one issue with the rip fence clamp it seems very hard to push into the lock position is this normal and can it be adjusted
Look forward to your response
Tony
Yes it can be adjusted. At the end of the fence there is a black plastic cap. Underneath is the mechanism you can try to adjust.
Excellent video as always. Which feather boards do you use on the Evolution table saw? The non standard miter slots makes it a bit tricky to find one that fits. Thanks for any info.
Thank you. Currently I'm not using any.
Hi Thomas! First of all, thank you for your great videos!! I actually have the rage 5 too and I have some issues with the fence. Each time I use it, I have to use a square because when I lock it, it's not in a perfect 90° angle. Did you have the same problem? Would you have any advise to help me? Thank you :)
Hi, have you tried adjusting it with those two bolts on top of it? If so you can also try to adjust the back jaw, take the plastic cover from the back of the fence and there is a bolt there. Try to adjust that. Hope this helps
@@CasualDIY great! I’ll try this as soon as possible!! Thank you again for all your precious tips! Keep on!!!
Thomas, I have been enjoying these "Basics" videos.
I'm glad that you liked them. Thank you for watching 👍
Thanks for the video ;-) Very good
Thank you for watching 👍
Good basic tutorial, however I think there was one important thing omitted.
12:28 and 15:25 - when the cut is finished, DO NOT touch the waste!
Get the stock past the blade, then power down the saw. Once it's stopped, retrieve the pieces!
Lots of accidents occur from reaching for (cut) parts with the blade spinning. or trying to flick them aside with the push stick.
Thank you for mentioning this great information 👍
Very informative video.
I too use the Saxton TCT blades in my Evolution table saw. Actually I use the 40 and 80 tooth Saxton blades with my evolution table saw, evolution circular saw and my evolution sliding mitre saw. I personally find that Saxton bladed stay sharper for longer and they cut extremely well. Actually ever since buying Saxton blades I've not replaced them and I've done plenty of cuts 🤣🤣🤣
Anyway, keep making these excellent videos and I hope that your parents are enjoying seeing their grand children more 👍
Yes the Saxton blades are great. Soon I'll be making a blade update video😁
Oh yes my parents and my kids love the time they can spend together so it was for sure a good idea to move.
Having lost the top of my thumb before Christmas I agree about taking a break before you get complacent.
Great video as always, thank you Tomos.
Yes I think its something that we sometimes ignore and we should not.
Thank you kindly for watching 👍
Love saxton blades for most of my tools. Keep up the great videos buddy 👌
Thank you very much 😁
Another excellent video with lots of great info for all who want to learn to have a safe relationship with a table saw
Hehe thank you very much 👍
Very good video, Tomasz, thanks.
Thank you kindly for watching 👍