$20 Amazon HeadGasket Tester! How to test your gaskets at home.

Поделиться
HTML-код
  • Опубликовано: 2 фев 2025

Комментарии • 26

  • @hhova29
    @hhova29 Год назад +4

    Nice video. I just ordered one to test on a potential commuter car I’m interested in. The fluids and all look good but u can never be to sure and at least I can throw plates and drive her to a shop for inspection.
    Do u think I can also do this same procedure but from the coolant overflow reservoir instead of radiator??

    • @Dartmech
      @Dartmech  11 месяцев назад

      Should work just fine, the coolant will end up in the reservoir eventually.

  • @Travelingcarguru
    @Travelingcarguru 5 дней назад +1

    The black thing does not fit on my Acura Integra radiator since its opening is small. The set up sits there loosely, will this give false readings?

    • @Dartmech
      @Dartmech  5 дней назад

      Possibly.. you can’t shove it down in there? I wonder if there aren’t different sizes but I didn’t see anything on their site.

    • @a_storm_inside7026
      @a_storm_inside7026 14 часов назад

      This tool is useless if it just suck coolant into the device. Makes no sense

    • @Dartmech
      @Dartmech  13 часов назад

      @@a_storm_inside7026 then there’s too much coolant. Syphon some out and it’ll work.

  • @haz_jun2442
    @haz_jun2442 Год назад +2

    Thanks, very helpful

  • @pitboss2617
    @pitboss2617 Год назад +2

    Would you advise to siphon off a cup of coolant before taking the test?

    • @Dartmech
      @Dartmech  Год назад

      Yes, if it’s too full it’ll creep up into the tube.

  • @jonmullaly7497
    @jonmullaly7497 Год назад +2

    Thanks

  • @albertnelson2868
    @albertnelson2868 11 месяцев назад +1

    very helpful!

    • @Dartmech
      @Dartmech  11 месяцев назад

      Glad it was helpful!

  • @campcop9214
    @campcop9214 Год назад +1

    Why was the coolant sucking up like that?

    • @Dartmech
      @Dartmech  Год назад

      Coolant expands when hot so without a pressure cap it will flow out. Thats why I recommend draining a bit out first.

    • @campcop9214
      @campcop9214 Год назад

      @Dartmech makes sense. Do you know why the level goes up when removing the cap cold. Like a suction pulling some up and level rises abit, can hiss a bit aswell removing cap

  • @ShabanaIqbal-h7y
    @ShabanaIqbal-h7y 11 месяцев назад

    What is the meaning of light blue colour?

  • @loupeurfabe6114
    @loupeurfabe6114 4 месяца назад

    Pourquoi ca ne bouille pas quand je fais le test sur ma PRIUS
    Il y a 0 réaction

  • @pierluigicicinelli3361
    @pierluigicicinelli3361 Год назад +3

    thanks for your video but what about the test is reliable?

    • @Dartmech
      @Dartmech  Год назад +1

      Its pretty reliable. The chemistry involved either shows a leak or it doesn't. Pretty solid in my opinion.

  • @slowattougeracingteam69
    @slowattougeracingteam69 9 месяцев назад +1

    What does a lighter Blue mean 😅

    • @Dartmech
      @Dartmech  9 месяцев назад

      Yellow and green mean headgasket leak most likely. Any change from blue is basically bad news 🙃

    • @slowattougeracingteam69
      @slowattougeracingteam69 9 месяцев назад +1

      ​@@Dartmechthanks for your fast answer, with light blue i mean it looks like the "new" one/ the one on the right at 5:57

  • @LamoidZombieDog
    @LamoidZombieDog 9 месяцев назад

    I just got one, this thing is junk. It doesn't work with Honda because Hondas don't build pressure if you take the cap off

    • @Dartmech
      @Dartmech  9 месяцев назад

      It just uses the air vapor in the system. You don’t want a lot of pressure with them. The car that needed the headgasket had an open coolant system.

    • @LamoidZombieDog
      @LamoidZombieDog 9 месяцев назад

      @@Dartmech I'm not saying you need to build up 50psi, but any gas that's coming through needs to go through the tester. In the case of a Honda, there is a hose going through the cap where is where that gas exits from, the hose doesn't go into the side of the tank, so all of the gas escapes through the cap and won't go through the tester. And for the radiator, it just does not fit into the radiator. So this tester is completely useless for Hondas and I had to return mine.

    • @OneYearAgoT0day
      @OneYearAgoT0day 9 месяцев назад

      ​@@LamoidZombieDogwhy couldn't you just cap that coolant overflow hose. Throw a bolt in there and be on your way. Could've also trimmed down the rubber cap to make it fit. Sounds like you shouldn't be working on cars, just take it to a mechanic bro