Peter Cook and Dudley Moore would love your use of "not only but also"! Great video as always, please keep up the good work and keep the videos coming. Have a great weekend, Joe
Hey thanks! I guess we are of a similar age then, at least I refrained from a "Derek and Clive" quote, YT would have a field day with that!! Have a great day!
Thanks for this one! I never bought one of the 3 versions of these Matek convertors because none of them offered the combined telemetry functions I would like to have. But now you showed us the additional "hidden" additional barometer connection on this Matek Converter CRSF-PWM-C board. This totals all telemetry I would like to have! And now I'm starting to realise that a regular cheap FC board with INAV, without the FPV equipment, could do the same, with an additional Return to Home function. Well, I think this Matek board is easy to set-up and therefor preferred in a conventional plane.
Hey thanks! I think this board is a real find. Usually what happens now is the manufacturer stops making it!! I'm working on some follow up videos with applications like logging the GPS data to the Tx SD card and other stuff, stay tuned! Have a great day!
@@1nformatica Nice, looking forward to your future vids. Local shop has still some in stock 😊. Telemetry data can give a lot of additional info and alarms as latest known location, state of Lipo, remaining flying time, thermals, motor-prop performance and so on.
@@ApappieK Yes, it's amazing what is available now. I'm sure you know that also now you can get gyro data back to the Tx, so won't be long before the first ELRS flight controller!!
Good evening, do you know how i can display the temperature in Edgetx from the MS5611 module? "Alt" and "VSpd" works, but the temperature is only shown to me in the Matek Configurator. Best regards, Aura
I only see the same as you. The Temp can be seen in the configurator but is not listed in the sensors seen by EdgeTx. I suggest contacting Matek support : www.mateksys.com/?page_id=1122 Thanks for watching, have a great day!
@@1nformatica Good morning! I received a response from Matek Service after a few hours! "Matek_Service: Not possible. There is no temperature ID in CRSF protocol." Best regards, Aura
Peter Cook and Dudley Moore would love your use of "not only but also"! Great video as always, please keep up the good work and keep the videos coming.
Have a great weekend,
Joe
Hey thanks! I guess we are of a similar age then, at least I refrained from a "Derek and Clive" quote, YT would have a field day with that!! Have a great day!
Thanks for this one! I never bought one of the 3 versions of these Matek convertors because none of them offered the combined telemetry functions I would like to have. But now you showed us the additional "hidden" additional barometer connection on this Matek Converter CRSF-PWM-C board. This totals all telemetry I would like to have! And now I'm starting to realise that a regular cheap FC board with INAV, without the FPV equipment, could do the same, with an additional Return to Home function. Well, I think this Matek board is easy to set-up and therefor preferred in a conventional plane.
Hey thanks! I think this board is a real find. Usually what happens now is the manufacturer stops making it!! I'm working on some follow up videos with applications like logging the GPS data to the Tx SD card and other stuff, stay tuned! Have a great day!
@@1nformatica Nice, looking forward to your future vids. Local shop has still some in stock 😊. Telemetry data can give a lot of additional info and alarms as latest known location, state of Lipo, remaining flying time, thermals, motor-prop performance and so on.
@@ApappieK Yes, it's amazing what is available now. I'm sure you know that also now you can get gyro data back to the Tx, so won't be long before the first ELRS flight controller!!
@@1nformatica I didn't hear anything about the gyro telemetry. Is that part of the CRSF - ELRS telemetry protocol?
@@ApappieK Check this out ... ruclips.net/video/8drcP6HkFbs/видео.html
Good evening,
do you know how i can display the temperature in Edgetx from the MS5611 module?
"Alt" and "VSpd" works, but the temperature is only shown to me in the Matek Configurator.
Best regards,
Aura
I only see the same as you. The Temp can be seen in the configurator but is not listed in the sensors seen by EdgeTx. I suggest contacting Matek support : www.mateksys.com/?page_id=1122 Thanks for watching, have a great day!
@@1nformatica Good morning!
I received a response from Matek Service after a few hours!
"Matek_Service: Not possible. There is no temperature ID in CRSF protocol."
Best regards,
Aura
Thank you for the update, Aura! I appreciate you taking the time to reach out to Matek Service and sharing their response. Have a great day!
Pretty nice hardware indeed, my friend! 😃
Looking forward to see you testing it!
Stay safe there with your family! 🖖😊
Thanks Mario! It has many applications I think!
nice :-)
excellent soldering!!! hmmm lol :-)
Hey thanks! Have a great day!
Yeah... Cheap is always expensive...
Still don't know why the first baro didn't work. 🤔