tank's to make it out there, elrs was in the need of something to go to next level ,plane people will go onboard now tanks to oxs team killer job , im just the messenger but its all for the community and to help people!!
That is awesome. This is what I have been working on. I would love to have some of these boards. I have used XPS power boards with big multiservo models handling 40 - 60Amp. I have used SBUS and XBUS streams to control them. Now is the time to mix them and get some telemetry. I will get back for these boards. Thanks for bringing up.
I was looking for an INEXPENSIVE way to run dual CRSF receivers and redundant batteries on small (under 50cc) gas, fixed wings. Yes there are other systems out there but they cost a lot and operate on much more expensive systems. Very happy to see someone is moving in this direction. Now, about that Etsy store...can this be made available to the RC community?
Pretty sure they're protective over s.port/f.port. Not sure what the ramifications are, but if CRSF works--that is better not only for issue avoidance, but s.bus is 9ms so substantially slower than CRSF which will operate at the OTA rate.
Didn't use an electron microscope to prove flow of electrons. This is a 100% trick of the camera!! That was obviously sarcasm. I appreciate the transparency but good lord, do people not take your word for things? Keep on keepin on my guy.
You would be shocked at some of the crap people put in comments. Force ninjas who know better than even video evidence from time to time. It gets old...
@@RCVideoReviews if i was in the states i would buy a board from you without any problem but since i'm in portugal the customs cost is so expencive that i can't import nothing from there, that was why i was asking for the schmatic. But no problem, thanks anyways.
Hang tight--this is early stage right now. I know the market is going to react and we still have work to do to tighten things up. How much would the taxes be on a $5 board?
@@RCVideoReviews Ok I will wait to see So I have recieved a gift for free from the states and in taxes and handling from the post office I have paid 26$, so for something that cost 5$ I would estimate something like 40$ in the end one board would cost to me ~45$
This is really great, so don´t get me wrong! But this is way tooooooo big! Most plane pilots will be looking for 6-8 channel, small form factor and light weight.
This is a development board with TH components. Also, this design is not really for little planes. I would have no problem fitting it as-is in my 73, 78, and 85” planes. We’re also working on 6ch and 8ch designs.
tank's to make it out there, elrs was in the need of something to go to next level ,plane people will go onboard now
tanks to oxs team killer job , im just the messenger but its all for the community and to help people!!
Good job making it happen. Thanks for letting me in on it.
Man this channel has reached a new level of geekness. Cool
LOL - Thanks....? I think?
That is awesome. This is what I have been working on. I would love to have some of these boards. I have used XPS power boards with big multiservo models handling 40 - 60Amp. I have used SBUS and XBUS streams to control them. Now is the time to mix them and get some telemetry. I will get back for these boards. Thanks for bringing up.
You're welcome.
This is really cool !
I think so too. Good stuff.
Very awesome, I love the science experience
I do too!
That’s cool. I already use the openXsensor GPS vario in my glider.
Oh nice! How has it been working out for you?
@@RCVideoReviews it works really well. It’s the original version running on an Arduino mini with an Frsky X8R receiver.
I am big on transportability disassemblability and redundancy As much as practical obviously. Good video good information.
Thanks Dave :)
I have 2x 6ch er6's on order for my F-14.... Yee Haw!
Yeah, this is cool stuff.
I was looking for an INEXPENSIVE way to run dual CRSF receivers and redundant batteries on small (under 50cc) gas, fixed wings. Yes there are other systems out there but they cost a lot and operate on much more expensive systems. Very happy to see someone is moving in this direction. Now, about that Etsy store...can this be made available to the RC community?
Working on it :)
Hey Brian, are you going to try these out?: Radio Master RP Series Receivers.
Given the 4 pins, it should be able to do S.Port Telemetry (may need a board mod to put RX and TX from the RP2040 on the S.Port pin) when using SBus.
Pretty sure they're protective over s.port/f.port. Not sure what the ramifications are, but if CRSF works--that is better not only for issue avoidance, but s.bus is 9ms so substantially slower than CRSF which will operate at the OTA rate.
I know this video has been out for awhile .. Do you have any of these boards I can purchase ? Love you videos !!
Thanks for the comment. These boards never made it to production.
Nice
Thanks!
Didn't use an electron microscope to prove flow of electrons. This is a 100% trick of the camera!! That was obviously sarcasm. I appreciate the transparency but good lord, do people not take your word for things? Keep on keepin on my guy.
You would be shocked at some of the crap people put in comments. Force ninjas who know better than even video evidence from time to time. It gets old...
I would like to make my onw board
is possble for to share the schematic of the board or maybe sell the schematic?
Probably not. People (not saying you) don't respect IP these days so once the plan is out, then it loses it's value as a source of revenue.
@@RCVideoReviews if i was in the states i would buy a board from you without any problem but since i'm in portugal the customs cost is so expencive that i can't import nothing from there, that was why i was asking for the schmatic.
But no problem, thanks anyways.
Hang tight--this is early stage right now. I know the market is going to react and we still have work to do to tighten things up.
How much would the taxes be on a $5 board?
@@RCVideoReviews
Ok I will wait to see
So I have recieved a gift for free from the states and in taxes and handling from the post office I have paid 26$, so for something that cost 5$ I would estimate something like 40$ in the end one board would cost to me ~45$
Ouch! That's terrible!
Let us dream of a low cost powerbox with integrated gyro and 2 receivers inputs ;o) it will be great for large airplanes
Yeah, a gyro would be a nice add to this.
This is really great, so don´t get me wrong! But this is way tooooooo big! Most plane pilots will be looking for 6-8 channel, small form factor and light weight.
This is a development board with TH components. Also, this design is not really for little planes. I would have no problem fitting it as-is in my 73, 78, and 85” planes. We’re also working on 6ch and 8ch designs.
@@RCVideoReviews Awsam, waiting for the 6/8ch!!!!! Thanks!
its 2.5" square... its not big