VW 1300 1969 - is not possible take out of dynamo with turbine from cooling case. Is there too small place for pulling. I have to removed suction pipes and this was not enough to. In my case was need take out turbine from generator first fom back side of cooling case.
There is very little space. Some more space can be achieved by removing the "Dog House" from its attachments. For that you need a smal and stuby screwdriver to remove the screws and get the doghouse lose. I hope that helps
I'm not sure why you find it to be the most difficult. I removed them all with a Sttuby flat screw driver. Installed them back the same way. The screw location is not particularly difficult if you have the rigth tool
Авто/Мото
VW 1300 1969 - is not possible take out of dynamo with turbine from cooling case. Is there too small place for pulling. I have to removed suction pipes and this was not enough to. In my case was need take out turbine from generator first fom back side of cooling case.
There is very little space. Some more space can be achieved by removing the "Dog House" from its attachments. For that you need a smal and stuby screwdriver to remove the screws and get the doghouse lose. I hope that helps
So you don’t show how you removed the most difficult left side fan shroud screw🤦♂️
I'm not sure why you find it to be the most difficult. I removed them all with a Sttuby flat screw driver. Installed them back the same way. The screw location is not particularly difficult if you have the rigth tool