I made the same mistake when I put the hellcat intake on my scat pack with the 19’ grille. I purchased the 15’-18’ molded piece that goes over the snorkel but the 19’ is actually different and smoothed out better and the grille for better airflow.
Make sure you get the 2019 grill adapter part cause it's different from the pre 2019 Hellcats. Your buddy got the wrong one, he got per 2019 which has that corner blocking half of the intake on the grill.
Thanks Bro All ready ordered my. After couple months looking for it on Ebay. This was by far the best price. Saved about 40.00. Thanks Hemi Fan! Blessings...😬😬😬😬💪💪
So did anyone else notice they didn't transfer the mounting grommet from the old lower to the new one? It can be seen at 7:54 on the old lower, not on the new one at 8:06, and he just puts it in
Hemi I got a question because I know you know about these Dodge Charger. I put a K&N Cold Intake. And I took the air tube out and my car is getting a little i mean a little hot. I am ocd about these kinda stuff. Do you think it's because I took the tub that goes into the right hand side. I was thinking it wasn't because its not the coolant its the air filter.
Awesome video!!! My 2015 has the same lower intake box and I am wondering if I need to get the lower intake box? I know it's larger on the top side to get more air but my question is the following. If I get the nostril tube and the headlight bezel with the hole, will my stock lower airbox work if the hole is there like the one on your car? Are the holes in the same spot? Meaning if the tube will fit directly on the stock one? If you can get back to me, I would greatly appreciate it.
Nice job! I’ve seen another video that someone kept a lower end of the stock plastic bracket and added the new bracket that holds the tube. Is there any gain on that?
Thanks I appreciate the feedback. Any of the old stock parts should be completely removed and replaced with the new 2019 parts. In order to insure a clean install.
I have the 2020 Charger GT model (super track pack) If I swiped out my grill for the scat pack grill with the Nostrils, I could do this mod then right ?
Awesome video! Where do I find all these mopar parts now? It seems like all your links are broken and when I search that website, the parts do not exist anymore. I'm upgrading to the snorkel grille on my RT and I want to do the lower hellcat airbox while the front end is off. I'd like to do the intake tubing as well to make it fully functional. I can't seem to find the correct parts anywhere.
Hey bro quick question. I have a 392 charger with a JLT CAI and I’m trying to see how I can get more air through the grill. I don’t think they sell a tube for the JLT. If I remove the stock bracket, the peace you took off on 3:30 do you think I’ll be ok ?
I just ordered the AFE Momentum GT CAI and the 2019 grille for my 2021 Charger RT. All I need is the bracket and intake tube correct? Is there a link with the parts number for it?
so i'm looking at switching to this grill, i would like to know the correct part #'s i currently have a 2020 R/T, is the bottom grill needed as well, all the info is appreciated
Thanks for the vid. I bought my 2019 scat pack from Steve white motors. Now I’m ordering the hellcat kit from them lol if I had known it was the same I could’ve picked it up or even had them install lol thanks again.
The links do not work. I have a 2019, so I do not need the grill? My lower also has a hole in the front of it. Do I need the hellcat lower assembly then?
i wonder if this would fit a 2011-2014 charger i know the body is different but i know the air box is the same i wanna take the front end off of mine and do some comparisons if i can get one to fit ith some moding that would be awesome
do you by chance have the part numbers for the tube and the part in the front grill that you need to replace that allows the air to flow past the headlight into the tube? I already have the grill and just need those two parts
Thank you for your videos. Helpful for all chargers drivers like me but your description below isn’t working so tha is a problem because in your videos you never show the parts # like another RUclipsrs show during the videos
The OP said the mod works for all newer models except a Hellcat? I have a 2016 Hellcat, so the air tube, front bracket, and Snorkle upgrade is an easy mod since we already have the lower box.🤓
Did you have to buy both the upper and lower radiator grill so they matched? Or can I just buy the upper snorkel grill and it’ll match my stock RT super track pack grill?
@hemifam I have a 2019 charger RT HOWEVER I have a series 2 JLT cold air intake….. I just need to purchase the Hellcat air box and the air feeder tube that’s it??? I really appreciate that help from anyone ….
120 intake temps at 65 outside temp yes you want this trust me I plan to get 130ish intake temps with this when its 117 out here cars get heatsoak bad here and timing chains clank bad here granted most people use cheap octane gas too
regardless of the air box used that left corner ,meaning because air is funneled through there ) gets really heat soaked. unfortunately it's design inherent. Keep eye on ur temps and open the hood when parked as possible. That hot coolant bottle stupid way to locate adds more engine power killing heat !!
Hemifam i like the idea of more cool air hitting the engine, Dodge has been around for over a century so they know what they r doing. want to add this to the wife’s 2018 rt.
imho this is big waste of money. I replaced my 80mm tb with a 90mm, my intake is a 102mm hose with a 9+ inch spectre cone filter. And I also have a spacer to reduce 90mm to 85mm and avoid that 5mm wall for better flow. My combo yields a nice boost and probably cost me half what all those chunks of plastic they install cost them, and I can assure you I got plenty nice extra oomph, combined with the modified exhaust I have. If you want extra power, do a mid muffler delete and replace that tubing with at least 2.5 inch down. Your muffler shop can do this.
I want to get that afe gt momentum air intake, for my rt, i have the scat grill with out the bee on it, no up badging over here, but i was wondering where to find the tube that hooks to it like the hellcat airbox is.
I have a 2019 Dodge Charger scatpack but I’m thinking to paint of replacing the black upper front grill bezels (nostrils) but I don’t know if I can just pop them out myself or I would need a professional to remove the entire bumper can anyone help me with this.
The Scats and Hellcats have the “nostrils” at both ends of the upper grill. The right nostril lets air into the tube that connects to the Hellcat airbox.The GT and RT dont, so in order to get proper air flow into the tube, youd want to get the Scat/Hellcat grill. You shouldnt need to replace the whole fascia...Just the upper grill that includes the nostrils.
The 2019 grill and intake tube will need to have a SRT style front fascia for it to work together. You may be able to get the Hellcat lower air box though.
I like this idea I've always thought about that and when I found this video I was like that's really freaking cool but then to think about it for a performance a performance aspect I don't see how that's gonna really be doing much because because yes air is coming in from that tube that you put in but it's very small in the middle restrictive restrictive I just don't know from Performance aspect if this is really worth it
Sadly that wasn’t a 2019+ intake tube or shroud. It was a 15-18 hellcat intake tube and shroud. 19+ have a notch cut out on the tube and different molding. Installs the same just a little different.
No, just the tube, radiator shield and hc lower air box but make sure you get the right parts though because I think the 2019 is different than the 18 down. Learn from my mistake haha I got a 19 scat and I ordered the wrong year
Looks like it would work just fine without the nostrils. Honestly looks like this intake is, if anything, more constricted by the nostril grille than the mesh lol.
Shop Luxe Auto Concepts Mopar products 📦-> bit.ly/LUXEAUTO
Hemifam thanks, what is called this part? Or part number please Thanx again
@hemifam do you know if this will work with a mopar air intake for a 2020 charger??
I made the same mistake when I put the hellcat intake on my scat pack with the 19’ grille. I purchased the 15’-18’ molded piece that goes over the snorkel but the 19’ is actually different and smoothed out better and the grille for better airflow.
Interesting I do see the difference in them I am not 100% certain what year he ordered.
Can you help me find a link for the intake you did.
How did yall get the wrong please help us
Why do the 2019 have the air flow thing and the others years don’t ?
Make sure you get the 2019 grill adapter part cause it's different from the pre 2019 Hellcats. Your buddy got the wrong one, he got per 2019 which has that corner blocking half of the intake on the grill.
Thanks for that info!
Thanks Bro All ready ordered my. After couple months looking for it on Ebay. This was by far the best price. Saved about 40.00. Thanks Hemi Fan! Blessings...😬😬😬😬💪💪
Glad we could help you out I hope you used the HEMIFAM coupon code too it saves a bit on your order. Don't forget to subscribe to our channel. 🙌🏻
I'm following you since before get my charger. Keep the good work. Like your videos💪💪💪👈👈
Much appreciated brother you are the real MVP! 🙏🏼
This is one awesome video for content to all the Charger fans out there ! Super Fantastic job ! 👍 😎😎😎😎😎
Thank you I try to produce quality content Mopar owners will enjoy and can use on their own cars. 🙌🏻
It looks like this could also work on my 2019 Charger GT with the V6. Hmm...
My friend is trying to do that rn....but he may just settle and get a K&n cold air intake for his 2020 gt. And get a pedal commamder
@@Hermes8A8A any update on that? I have a 2020 GT
these work with the v6 models
@@Fr0sty4242 when i used to have the v6 i had a k&n intake and the mpg dropped , worth the sound tho in those high rpms
These work with GT I have a one installed on my 2021
Do you have the MPOAR numbers for the 3 parts used in this video? The link in the description is not working.
So did anyone else notice they didn't transfer the mounting grommet from the old lower to the new one? It can be seen at 7:54 on the old lower, not on the new one at 8:06, and he just puts it in
Just ordered mine, thanks for the discount.. be back when it's time to install-ations. 😉
Hemi I got a question because I know you know about these Dodge Charger. I put a K&N Cold Intake. And I took the air tube out and my car is getting a little i mean a little hot. I am ocd about these kinda stuff. Do you think it's because I took the tub that goes into the right hand side. I was thinking it wasn't because its not the coolant its the air filter.
Awesome video!!! My 2015 has the same lower intake box and I am wondering if I need to get the lower intake box? I know it's larger on the top side to get more air but my question is the following. If I get the nostril tube and the headlight bezel with the hole, will my stock lower airbox work if the hole is there like the one on your car? Are the holes in the same spot? Meaning if the tube will fit directly on the stock one? If you can get back to me, I would greatly appreciate it.
Nice job! I’ve seen another video that someone kept a lower end of the stock plastic bracket and added the new bracket that holds the tube. Is there any gain on that?
Thanks I appreciate the feedback. Any of the old stock parts should be completely removed and replaced with the new 2019 parts. In order to insure a clean install.
Great video, is there anyway to install the air box without taking the whole front bumper off?????? Please let me know thank you so much
I have the 2020 Charger GT model (super track pack)
If I swiped out my grill for the scat pack grill with the Nostrils, I could do this mod then right ?
Awesome video! Where do I find all these mopar parts now? It seems like all your links are broken and when I search that website, the parts do not exist anymore. I'm upgrading to the snorkel grille on my RT and I want to do the lower hellcat airbox while the front end is off. I'd like to do the intake tubing as well to make it fully functional. I can't seem to find the correct parts anywhere.
a year late ik but Did you ever find the parts
Hey bro quick question. I have a 392 charger with a JLT CAI and I’m trying to see how I can get more air through the grill. I don’t think they sell a tube for the JLT. If I remove the stock bracket, the peace you took off on 3:30 do you think I’ll be ok ?
I just ordered the AFE Momentum GT CAI and the 2019 grille for my 2021 Charger RT. All I need is the bracket and intake tube correct? Is there a link with the parts number for it?
He should’ve dyno it to see if the upgrade is worth it for the HP Gains
According to Dodge the 2019 Hellcats gained 10 horses from the functional snorkel grills/nostrils so not sure what it would do to the 5.7.
With a tune he will show some hp increase
so i'm looking at switching to this grill, i would like to know the correct part #'s i currently have a 2020 R/T, is the bottom grill needed as well, all the info is appreciated
Me too! 2020 RT Daytona I cant find the parts haha
if you got anything let me know? i have a 2020 rt as well and thinking about doing this
Thanks for the vid. I bought my 2019 scat pack from Steve white motors. Now I’m ordering the hellcat kit from them lol if I had known it was the same I could’ve picked it up or even had them install lol thanks again.
How would you say this might compare to an aftermarket drop-in cold air intake?
updated link??????
Would a hellcat lower airbox and cover(2016 to 2020) still fit a 2021 or 2020 charger 392 widebody?
was taking off all the car parts that necessary?
Where did you get the front bracket from? I have a 2020 Scatpack. I may not even need that. I haven’t taken it apart yet so I have no idea.
The links do not work. I have a 2019, so I do not need the grill? My lower also has a hole in the front of it. Do I need the hellcat lower assembly then?
i wonder if this would fit a 2011-2014 charger i know the body is different but i know the air box is the same i wanna take the front end off of mine and do some comparisons if i can get one to fit ith some moding that would be awesome
I have this setup on my afe gt momentum air intake! 19 grille and intake tube with shield on my scat!
Perfect brother you are all set for your 392 to breath fresh clean air! 🙌🏻
@@Hemifam do you still have your afe?
Yup I sure do!
datboibg21 did you need any extra pieces to connect the intake tube to the afe box?
@@tallgeo2585 nope. It fits right in
I know I am late, but this is better than getting a cold air intake?
Honestly it’s personal preference. Both are great choices!
I truly appreciate the advice and information. Thanks bro. Love the whip 🔥🫡
do you by chance have the part numbers for the tube and the part in the front grill that you need to replace that allows the air to flow past the headlight into the tube? I already have the grill and just need those two parts
Any issues with getting the headlight to line up correctly? Nothing worse than the beams uneven. 🤯☠️
Any tips or tricks to just change the snorkel without pulling the bumper?
Bro I tried there’s literally no space to pull tht shit it out
Can I do this same thing to a 2019 dodge Durango 3.6 engine tho? And would it make a difference or should I just wait till I get a v8
Do you have the links for the grill adaptive and the hellcat lower air box ? The links aren’t working .
Where do you buddy got those lights ? I want some for my 19 charger
They are from Lighting Trendz.
I’m thinking about doing the snorkel grill upgrade but is it mainly cosmetic or do you see a difference with 10+ horsepower
Great content as always, that Charger is a beauty! 💀😈
Good info, I've already done mine,works great
Great vid! will the hellcat air filter fit in as well?
Thank you for your videos. Helpful for all chargers drivers like me but your description below isn’t working so tha is a problem because in your videos you never show the parts # like another RUclipsrs show during the videos
Is this the same with a 2019 charger Scatpack?
2019s already come with it. that why u guys have the snorkels
B100DzZz no it doesn’t have the air tube the air boxes are different.
Jevaughn Levy so I would be able to install the hellcat air box right?
@@Town510 yea. just install it the way they did in the video.
Did you guys find it ? I have tried using the link and cant find it
The OP said the mod works for all newer models except a Hellcat?
I have a 2016 Hellcat, so the air tube, front bracket, and Snorkle upgrade is an easy mod since we already have the lower box.🤓
On that 2015 RT the SRT bumper was that a direct fit on that car or was there mods that had to be done in order for it to fit?
The links didn't work can you list the parts by name so I can order and install.
Am I tripping or does the car already have the ram style intake before you touched it but it was just at the lower grille instead of the upper grille?
What is the part number for the tube and bottom tube holding ??? Can’t find it
I have 2019 SXT 3.6V. Can I still do this and will it make my V6 a bit faster ?
Do you have the new link to the air box? I can't find it????
Would like to make this modification as well. Do you have a working coupon code?
Another awesome vid bro
Thank you much appreciated sir!
Would this fit on a 2018 Dodge Charger R/T plus (scatpack body style without bezels)?
Did you'll ever do a video of him driving it aft the install, I would like to know his thoughts on it
I can't find any. Wanted to see also. Thinking about doing the same setup. Other videos I found say alot better throttle response.
Any way to install these components on my 2013 charger srt8?
How bad would it be if I didn’t put on the shield around the tube
will this work on my Daytona I have the Mopar proformas air intake
I was wondering the same thing
I’m wondering if I can see hp gain if I do it even though my grill doesn’t have a nostril
Did you have to buy both the upper and lower radiator grill so they matched? Or can I just buy the upper snorkel grill and it’ll match my stock RT super track pack grill?
Question? If I keep my stock grill and purchase the hellcat lower air intake for my 2018’ 6.4 Charger. I can keep my factory grill correct??
That's what im going threw rite now cause my 16 scat pack grill is pretty open i dont think the snorkel would make a big difference
I was wondering the same thing here. What did you end up doing?
Do you know if the inlet tube for charger is compatible with the AFE momentumGT CAI?
You didn’t switch air filters, not even to the hell cat filter?
@hemifam I have a 2019 charger RT HOWEVER I have a series 2 JLT cold air intake….. I just need to purchase the Hellcat air box and the air feeder tube that’s it??? I really appreciate that help from anyone ….
Do you think this will fit on a 2020 charger scat pack ?
How necessary is swapping to the hellcat grill? I prefer the original 2019 grill over the hellcat grill.
I jst tossed a hellcat air filter in my scatpack air box works great
Hey brother do you really need to get the hellcat airbox or you can just install the grille and leave it like that ???
Yes you can install the grille without the extras
120 intake temps at 65 outside temp yes you want this trust me
I plan to get 130ish intake temps with this when its 117 out here cars get heatsoak bad here and timing chains clank bad here granted most people use cheap octane gas too
regardless of the air box used that left corner ,meaning because air is funneled through there ) gets really heat soaked. unfortunately it's design inherent. Keep eye on ur temps and open the hood when parked as possible. That hot coolant bottle stupid way to locate adds more engine power killing heat !!
I have the the same intake as your car where can i order the hose and the lower part? All i can find is kits
So can you not use the badge from the old grille onto this grille?
i would be concerned about water getting in there... and into the air box/intake... could be concerned for nothing but just a thought.
Lucho S correct... just found the design and placement sort of strange.
I guess we will find out soon enough lol 😅
SIC DETAILING I agree
Hemifam i like the idea of more cool air hitting the engine, Dodge has been around for over a century so they know what they r doing. want to add this to the wife’s 2018 rt.
Yeh unless you put the hose in the nostril and rev engine I’m sure you’ll be just fine. 🤙🏼
Will this add power?
imho this is big waste of money. I replaced my 80mm tb with a 90mm, my intake is a 102mm hose with a 9+ inch spectre cone filter. And I also have a spacer to reduce 90mm to 85mm and avoid that 5mm wall for better flow. My combo yields a nice boost and probably cost me half what all those chunks of plastic they install cost them, and I can assure you I got plenty nice extra oomph, combined with the modified exhaust I have.
If you want extra power, do a mid muffler delete and replace that tubing with at least 2.5 inch down. Your muffler shop can do this.
I want to get that afe gt momentum air intake, for my rt, i have the scat grill with out the bee on it, no up badging over here, but i was wondering where to find the tube that hooks to it like the hellcat airbox is.
You can find it on ebay and I've seen it on amazon.
@@JennyCaldas0506 Thank you, ill take a look
Cool, what is the part number of this 13:12 or the name of this part and where can I buy it?
Thanks
Link is in video description.
@@Hemifam The link doesn't work
I have a 2019 Dodge Charger scatpack but I’m thinking to paint of replacing the black upper front grill bezels (nostrils) but I don’t know if I can just pop them out myself or I would need a professional to remove the entire bumper can anyone help me with this.
Rosh Don you can do it! They just pop out. I found some online red in color and I’m buying those and put them in myself.
Water dont inside when washing?
Wait did the last snorkel not fit after the new setup?
What about 2020 Scatpack?
Clean install, nice.
Thank you it looks and works really well! 🔥
One like for that Modelo ;)
The link isn’t working anymore :/ smh is there a new link ?
Do I have to change the grill to to install this on my 2020 rt ?
The Scats and Hellcats have the “nostrils” at both ends of the upper grill. The right nostril lets air into the tube that connects to the Hellcat airbox.The GT and RT dont, so in order to get proper air flow into the tube, youd want to get the Scat/Hellcat grill. You shouldnt need to replace the whole fascia...Just the upper grill that includes the nostrils.
Will this all fit in a 2017 dodge charger sxt?
So does the hellcat air box replace the air intake or does it change ?
Did you have to do any resets after the install?
Nope no resets needed at all.
Is there a need for turning after this??
Do you guys have mechanic’s and body shops in Miami?
Link doesn’t work. Can you direct to an updated one?
Will that be compatible with my 2016 sxt v6?
The 2019 grill and intake tube will need to have a SRT style front fascia for it to work together. You may be able to get the Hellcat lower air box though.
Did you remove the tires?
I like this idea I've always thought about that and when I found this video I was like that's really freaking cool but then to think about it for a performance a performance aspect I don't see how that's gonna really be doing much because because yes air is coming in from that tube that you put in but it's very small in the middle restrictive restrictive I just don't know from Performance aspect if this is really worth it
Can it fit on a GT? I have a 2020 it has the SRT front fascia
Never snapped it in does it fit?
The links sa page not found 😞
Sadly that wasn’t a 2019+ intake tube or shroud. It was a 15-18 hellcat intake tube and shroud. 19+ have a notch cut out on the tube and different molding. Installs the same just a little different.
Is this worth it just got my 392?
I have a 2019 scatpack would I have to buy every parts ?
No, just the tube, radiator shield and hc lower air box but make sure you get the right parts though because I think the 2019 is different than the 18 down. Learn from my mistake haha I got a 19 scat and I ordered the wrong year
8:15 Real nice like... 👍😁
Looks like it would work just fine without the nostrils. Honestly looks like this intake is, if anything, more constricted by the nostril grille than the mesh lol.
Does this affect warranty??
Being that the bumper needs to be removed I’d say most likely yes if the dealer ever found out about it. 🤷🏻♂️
Would this work with a 2020 scatpack?
I think you're getting in the way of the guy doing all the work
Can you put a Airbox on Sxt Charger18’