Got mine, getting the snorkels painted then install.....Cant wait, thanks for the video!! Both Steve White motors and Luxe Auto have very fast service. Thumbs up!!!!!!
Its 2024 am just seeing your video , i have the lower grille sensor😭 and your link is no longer working, anyone know where i can get one with the sensor cut out?
Hey Pham I have a question hope you can help me I am looking for the plastic piece in between the headlight to the front bumper on a scat pack bumper the bumper I bought does not come with that plastic do you think you can help me out?
@Hemifan did you have any offset between the hood and upper front bumper after you installed it? I have about 1/4 inch of offset at the center of the leading edge of the hood but the sides of the hood are level.
So just confirming, the air intake tube and shield is compatible w/ the aFe Momentum GT cold air intake? im trying to make the nostril functional with a cold air intake.
What’s the part number for the 2 push rods on the upper grille & the screws for the lower grille & what kinda pushpins are on the upper grille and the absorber
On a 2018 Daytona with the Mopar intake, in order to make the snorkels fully functional, remove the intake filter and replace with the hellcat air box?
Hmmmm is have to do some more research on the 2018 Daytona’s to confirm this though but here ya go. If the Hellcat intake box is compatible with your car then that and the front bracket for tube should be all that’s needed to make the snorkel functional.
Did you ever get an answer on swapping out 2019 grille with a cold air intake,cause the mopar cold air intake &the Hellcat air box with tube "DON'T work together "?any one know how to make them work together?anyone
dabeatboxer83 Nah man there is way more air flow. I just recently did it to my scat and normally my intake temps was 5-10 different from outside temps while cruising. With the new grill it’s about 3-4 degrees difference while cruising. Heat soaking is the same but temps drop extremely faster while cruising. Mine had heat soak to 130 in traffic it was 89 outside by the time I got moving again 2-3 miles down the road at 50-60 mph my temps was back to normal are 92 degrees.
Considering what charger to get rn and going through all the mod videos I can to understand what base model to get and what mods I can do. Want something as a daily driver (I drive like 2 miles a day for general stuff lol) but I want a project car I can work on. I don’t want much power. Something decent MPG, and I want it to look badass asf. Love the bumpers on the 2018+ scatpacks and hellcats. Want a black scatpack style hood. What model would you recommend for the base if you know much about charger models?
if you havent bought 1 yet I recommend the r/t they have 300 almost 400 horsepower have kinda of a better mpg then the 6.4 392s and hellcats and is the base model v8 chargers
@@jonathandeleon8240 true insurance for a scat is almost the same price for a hellcat im going to get a 2015 r/t and then just modify it in my own taste
So by your answer I imagine this doesn’t work for the standard 2018 v8 R/T non scat/Daytona packages as well? I have a hellcat air box that I bought. Someone told me it would fit, which it does, but it’s pointless without the air ram srt front grill. Is there an adapter or similar package out on the market that will work with a non-srt/SCAT/Daytona package?
Michael Probst Not at all I just recently did it to my scat and normally my intake temps was 5-7 different from outside temps while cruising. With the new grill it’s about 3-4 degrees difference while cruising. Heat soaking is the same but temps drop extremely faster while cruising. Mine had heat soak to 130 in traffic it was 89 outside by the time I got moving again 2-3 miles down the road at 50-60 mph my temps was back to normal are 92 degrees.
I’m looking to do the 2019 grille swap on my 2017 Scat pack but I was curious does my OEM scat pack badge that I have on it now, will it mount on the 2019 grille or do I have to order a new grille badge that fits the 2019 grille ?
Shop Luxe Auto Concepts Light Wrap products 😎-> bit.ly/LUXEAUTO
Appreciator you for this. I was super nervous about doing this. This in-depth video hyped me up. Can’t wait to get started.💯
You got this bro!
Where’d you get the 392 led for front lower grill?
It’s an X-Lume badge.
@@Hemifam thanks bro
Got mine, getting the snorkels painted then install.....Cant wait, thanks for the video!! Both Steve White motors and Luxe Auto have very fast service. Thumbs up!!!!!!
I've seen one where the snorkels light up. That'd be dope on this one.
That would be bad ass
We’ve got something coming 🤙🏼
Where did you get the vinyl wrap for stripes I’m trying to do my front lower bumper scratched up from those banana bumpers
the links arent working for me
Does it fit on a sxt?
Looking for the led headlight like yours, where can I get it? Thanks
How can I get the strips on my car like you have??
Do you know if this fits the 2020 rt’s
Its 2024 am just seeing your video , i have the lower grille sensor😭 and your link is no longer working, anyone know where i can get one with the sensor cut out?
Where did you get those🔥ass lights from😍 and the lights on the bottom bumper
To that front vent by the headlights is only for 2019
Hey Pham I have a question hope you can help me I am looking for the plastic piece in between the headlight to the front bumper on a scat pack bumper the bumper I bought does not come with that plastic do you think you can help me out?
Will the old Scatpack badge fit in this new grill?
hey can i install this on my 2019 Dodge Charger GT?
Yes! I did mines!
Tried the airbox and badge links and its not found for some reason. Are they not offering these parts anymore?
i thought NB Scats already come with that grill, with the snorkels
Great install video👍 That Hellcat tube will be a nice addition👌
Thanks bro! Coming soon. 😅
@Hemifan did you have any offset between the hood and upper front bumper after you installed it? I have about 1/4 inch of offset at the center of the leading edge of the hood but the sides of the hood are level.
Is there a hood insert that matches the new grill pattern?
I have my snorkels hydrodipped in carbon fiber
That sounds sweet! 🔥
Looks awesome bro. Thanks for the video
This the best video yet.
So i have an 2018 dodge charger hellcat. I ordered the front grill but didn't get the bottom one. Do i need to have both top and bottom front grills?
What company's headlights and fogs are you running?
Lighting Trendz
@@Hemifam you purchased the equipment and had them installed or a one stop shop?
I did the install myself actually.
@@Hemifam badass!!! I'd be too nervous
Hey where can I find the two red line Dodge Logo that you have on your lower grille? Thanks!
Here you go.
etsy.me/2LaC5Mq
@@Hemifam thanks!
Where did you get that front end camera from ?
Looks good bro...definitely on the to do list
Awesome! It’s gonna look great. 😎
Can you add a SRT emblem to this upgraded grille? If so, which emblem will be a direct fit..?
So just confirming, the air intake tube and shield is compatible w/ the aFe Momentum GT cold air intake? im trying to make the nostril functional with a cold air intake.
Yes if you have a GT momentum intake all you’d need is the tube and front bracket and it will plug into the front of aFe box.
Nice job Bro, always great! I have bought things from Steve White Mopar...
Oh yeh they are the best! Use code HEMIFAM next time to save a few bucks. 🤙🏼
What’s the part number for the 2 push rods on the upper grille & the screws for the lower grille & what kinda pushpins are on the upper grille and the absorber
Yo bro I gotta question can I buy a upper grille with the in air intake wholes and put my srt badge with the hellcat emblem on upper right?
I have a 16 charger Hellcat, do I need the ram air box and tube shield too?
How did you get your X-Lime badge to coincide with your headlights?
You can run the XLume of any bluetooth controller really. So I have it on the same app as my headlights.
So this doesn’t work on a 2019 Charger RT??
Joe B yes it does. As long as you have the SRT front fascia which you do.
Great mod, just did mine a couple weeks ago. Love it
Well done sir! 😎
Lmao and saved yourself 43k
Minus a few other 2019 goodies yes we sure did hahah 🙌🏼
Do they make this for 16 dodge charger rt? Hope they do I like this grill look . I think it look great on my RT
This does not fit on the non SRT style front fascia unfortunately. 😫
Sustain the outstanding job !! Lovin' it!
Thanks bro! 🙌🏼
Do I need the 2019 grill badge or can I reuse the original badge ?
On a 2018 Daytona with the Mopar intake, in order to make the snorkels fully functional, remove the intake filter and replace with the hellcat air box?
Hmmmm is have to do some more research on the 2018 Daytona’s to confirm this though but here ya go. If the Hellcat intake box is compatible with your car then that and the front bracket for tube should be all that’s needed to make the snorkel functional.
J. Reyes15 did you ever get your answer? There’s really only two ways to do it properly.
Did you ever get an answer on swapping out 2019 grille with a cold air intake,cause the mopar cold air intake &the Hellcat air box with tube "DON'T work together "?any one know how to make them work together?anyone
Hey bro, I have a 19 charger RT. I want to do the grille swap. I have an afe cold air intake. I wouldn’t need the adaptive grille would I?
I'm still not feeling the snorkles. Plenty of air passed through that grill before dodge changed it. I think it takes away the full grill effect.
dabeatboxer83 Nah man there is way more air flow. I just recently did it to my scat and normally my intake temps was 5-10 different from outside temps while cruising. With the new grill it’s about 3-4 degrees difference while cruising. Heat soaking is the same but temps drop extremely faster while cruising. Mine had heat soak to 130 in traffic it was 89 outside by the time I got moving again 2-3 miles down the road at 50-60 mph my temps was back to normal are 92 degrees.
Where did you get that 392 badge led?
U don’t need to take wheels off?
Does this fit the 2019 Charger R/T?
Yes it does. I replaced mine 2 months ago and it looks so much better. I have a 2019 Dodge Charger R/T destroyer grey
David Contreras did you get with or with out adaptive for the R/T
Christian Arispe without
David Contreras is there an rt badge for the front that fits that grill?
Will it fit the 2019 charger sxt?
Aw man I just got my scat and the site is down 🥺
Ik im late but would this fit the rt scat?
Will look great on my 2019 gt lmao
This does not fit on the non SRT style front fascia unfortunately. 😫
@@Hemifam GTs have the srt front, dont they?
I pretty should it, I’m trying to find out too
You think I can change the upper grill on to a 2019 Dodge Charger GT with the scat/hellcat grill?
Yes that’s what I’m doing rn
Considering what charger to get rn and going through all the mod videos I can to understand what base model to get and what mods I can do. Want something as a daily driver (I drive like 2 miles a day for general stuff lol) but I want a project car I can work on. I don’t want much power. Something decent MPG, and I want it to look badass asf. Love the bumpers on the 2018+ scatpacks and hellcats. Want a black scatpack style hood. What model would you recommend for the base if you know much about charger models?
if you havent bought 1 yet I recommend the r/t they have 300 almost 400 horsepower have kinda of a better mpg then the 6.4 392s and hellcats and is the base model v8 chargers
Go R/T and then upgrade to a scat pack kit. It will be cheaper on overall cost and insurance
@@jonathandeleon8240 true insurance for a scat is almost the same price for a hellcat im going to get a 2015 r/t and then just modify it in my own taste
Damn that scat is fire
Can this fit on a 2020 Dodge Charger GT front end ? I mean it looks just like yours with the performance hood and all
yes
Will this fit a 2015 charger rt road & track?
This does not fit on the non SRT style front fascia unfortunately. 😫
So by your answer I imagine this doesn’t work for the standard 2018 v8 R/T non scat/Daytona packages as well? I have a hellcat air box that I bought. Someone told me it would fit, which it does, but it’s pointless without the air ram srt front grill. Is there an adapter or similar package out on the market that will work with a non-srt/SCAT/Daytona package?
Will this fit a 2015 pursuit
?
Would this fit on a 2020 scat pack
Will this work on a 2019 rt?
Justin Alaquinez yep.
This does not fit on the non SRT style front fascia unfortunately. 😫
Justin Alaquinez I had the track pack 2018 5.7 RT. Thought that’s what you meant.
Did it fit?
what do you do for a living to afford this car? this is my absolute dream car and im just curious to know so i can get one when im older
Masterike2 literally like any job, i work security which gets paid minimum wage and i’ll be putting a 10k down in a couple months
@@smacksrus2330 bettttttttt
Does this fit 2019 rt
You didn't even show how you removed the inside bolts
Does anybody think this would fit my 2019 r/t? I think the 2019 r/t models were moved up to the hellcat/scat pack grille structures but I'm not sure
mruybkye yes it does. I swapped my grille 2 months ago and I love the look. I have a 2019 Dodge Charger R/T destroyer grey
@@davidcontreras1013can I just get the hellcat intake without swapping grills?
Dude look like you know what you doing
You changed the grill.. I guess you changed you mind on your feelings towards them
Yeh at first I was like ehhhhh then I just figured it was time. 😅
هل تستطيع بيعها لي؟
Can you sell it to me?
links broke
Looking like everyone else broooo 😂😂
Don’t worry I’ll add a little personal touch to it here soon. 🤙🏼
Haha i stay down the road from newton
😍😍😍👌🏻👌🏻👌🏻👍🏻👍🏻👍🏻
Thank you! 🤙🏼🤙🏼
welcome🙏🏻❤️
promo code """ HEMIFAM """
1
🤜🏼🔥🤛🏼
Waste of money, sorry. Leave the 2019 grill on the 2019 cars.
Michael Probst Not at all I just recently did it to my scat and normally my intake temps was 5-7 different from outside temps while cruising. With the new grill it’s about 3-4 degrees difference while cruising. Heat soaking is the same but temps drop extremely faster while cruising. Mine had heat soak to 130 in traffic it was 89 outside by the time I got moving again 2-3 miles down the road at 50-60 mph my temps was back to normal are 92 degrees.
33 mins is ridiculous
Why TF you here then... go install it your damn self lmaooo 💀💀💀
I’m looking to do the 2019 grille swap on my 2017 Scat pack but I was curious does my OEM scat pack badge that I have on it now, will it mount on the 2019 grille or do I have to order a new grille badge that fits the 2019 grille ?
did you have to order a new emblem?
Will this work on a 2018 R/T?
This does not fit on the non SRT style front fascia unfortunately. 😫