3 mins the fuck it take me 20 minutes just to get the ladder on my 2 story house then another 30 mins not try to fall off 🙃 😒 😑 😅 🙄 o can you plz come fix my metal roof
Love these videos thanks for making them. I just purchased poly seal for a metal roof patch on my old house. What type of metal should I use? Can I use the thin aluminum sheet that they sell at Home Depot? I do have some sheets of copper as well. Thanks for your help.
Can i treat underside rust on a flat unpainted roof near to the gutter by grinding and applying a heavy duty rust convertor from underneath, area about 2 sq metres,rest of the roof in satisfactory condition.
I did exactly what u said about measuring the leak from a landmark or reference point and accurately found every leak. After watching all your videos I finally got down to work and tackled it. Roof repairs are hard work, every joint in my body ached from standing on an incline and doing work plus the sun is draining. Thanks again for your videos.
Let me just tell you about the flat roof doctor's product Turbo Poly Seal. I have an old bungalow in Florida, the chimney needs to be flashed and it needs a cricket, why in the last hundred years it never had that I don't know but it leaked big time. I tried everything they sell at Lowes and Home Depot none of them work, all garbage. The turbo poly seal I used and fleece I quickly applied before a tropical storm, the first day it let in a bit of water, I thought here we go again, another product that doesn't work. But then, after a couple of sunny days it rained again, nothing this time, not a drop. Apparently it just needed a bit of time to cure. Not a drop since. This stuff is amazing, industrial grade, it works unbelievably well, highly recommend.
My advice is you cannot paint directly over rust without treating and sealing it and that includes the underside. The metal patch was screwed on to rusted iron and that rust will continue to creep It depends on how long you want it to last . This repair hopefully will work for 4-5 years but if you want to prolong the life you have to treat and seal all rusted areas both sides. Of course this is a lot more time consuming lifting the iron and attending to the rust on both sides before applying the patch.
I have patched many rust holes in metal roofs using a couple of tubes of permanent gutter sealant ,sheet metal and steel rivets and painting it,using screws doesn't allow the panel to expand and contract like it is suppose too.
In 4 minutes you taught me more about metal roof repair than any other method could. Thank you for your video. I discovered a leak in my roof during a rain storm. This knowledge divines me with the power to fix this and any other trouble spots I may discover. Thank you. I will pass your videos about.
Partially correct. If Plexiglass is considered plastic, then you can use it on that. I f Vinyl is PVC or TPO, then it is likely not to work on that unless you prepare the surface first
3 mins the fuck it take me 20 minutes just to get the ladder on my 2 story house then another 30 mins not try to fall off 🙃 😒 😑 😅 🙄 o can you plz come fix my metal roof
It tales me forty minutes to try and not fall off my one story house.
Love these videos thanks for making them. I just purchased poly seal for a metal roof patch on my old house. What type of metal should I use? Can I use the thin aluminum sheet that they sell at Home Depot? I do have some sheets of copper as well. Thanks for your help.
always match the type of metal you are trying to repair
@@FlatRoofDoctor thanks for the reply. It’s an old roof and I’m not sure what it is. All I know it’s not copper.
Can i treat underside rust on a flat unpainted roof near to the gutter by grinding and applying a heavy duty rust convertor from underneath, area about 2 sq metres,rest of the roof in satisfactory condition.
I did exactly what u said about measuring the leak from a landmark or reference point and accurately found every leak. After watching all your videos I finally got down to work and tackled it. Roof repairs are hard work, every joint in my body ached from standing on an incline and doing work plus the sun is draining. Thanks again for your videos.
I😊9
What's the biggest hole you can cover with the fleece. And wouldn't the silicone seal work and be better seince its white?
Let me just tell you about the flat roof doctor's product Turbo Poly Seal. I have an old bungalow in Florida, the chimney needs to be flashed and it needs a cricket, why in the last hundred years it never had that I don't know but it leaked big time. I tried everything they sell at Lowes and Home Depot none of them work, all garbage. The turbo poly seal I used and fleece I quickly applied before a tropical storm, the first day it let in a bit of water, I thought here we go again, another product that doesn't work. But then, after a couple of sunny days it rained again, nothing this time, not a drop. Apparently it just needed a bit of time to cure. Not a drop since. This stuff is amazing, industrial grade, it works unbelievably well, highly recommend.
Hey Mathew, I agree I used turbo poly seal on my patio and it’s still works! Very promising product!👍🏼
My advice is you cannot paint directly over rust without treating and sealing it and that includes the underside. The metal patch was screwed on to rusted iron and that rust will continue to creep It depends on how long you want it to last . This repair hopefully will work for 4-5 years but if you want to prolong the life you have to treat and seal all rusted areas both sides. Of course this is a lot more time consuming lifting the iron and attending to the rust on both sides before applying the patch.
Can't wait for that 1 person to come in here defending acrylic coatings despite countless evidence of them failing
I heard that we have to remove rust part of metal because it will keep rusting.
Have some rust just starting. What about knocking off the rust then prime the metal then spray paint the spot?
Well done matey! Great work. Good to see you have a loving partner to help you. Really love your videos and your quality work ethic. Ern from Ostraya
Glad you like them!
he's good at this work... but flat roofing horrible at
I have patched many rust holes in metal roofs using a couple of tubes of permanent gutter sealant ,sheet metal and steel rivets and painting it,using screws doesn't allow the panel to expand and contract like it is suppose too.
In 4 minutes you taught me more about metal roof repair than any other method could. Thank you for your video. I discovered a leak in my roof during a rain storm. This knowledge divines me with the power to fix this and any other trouble spots I may discover.
Thank you. I will pass your videos about.
Is he using toilet paper?
What is that grinder you are using?
You can't use silicone on plastic or vinyl !!
Partially correct. If Plexiglass is considered plastic, then you can use it on that. I f Vinyl is PVC or TPO, then it is likely not to work on that unless you prepare the surface first
have you tried inland rc2250?
There are so many products that it would take a long time to know all of them
Any product for use in India like the turbo poly seal?
nope sorry
Thanks for the information!
Any time!
Güau !!
Excelente trabajo
mucha gracias
Cool
Thank you
Awesome
over the top
Awesome
your' the man
Awesome
thanks