Nice video... can you please listed all the materials you are using or provide a link to purchase? I have no idea how to search the material you shown just after the dc motor. And i can't find that steel shaft you are using.
Thank you for watching the video😊, you can search with the phrase "Pulley GT2" online and buy it, all the materials I have are in the video, and the saw shaft is an 8mm steel bar.
@@TNHcreative So if you attach a belt does it retain the speed ? Some energy loss will be there through the belt but one advantage is the " shaft of the motor won't get damaged ".
I have shown in the video, everything has its principle, why I use a small pulley in the motor and a larger pulley in the shaft. If you find your design better, please share with everyone. ☺
@@TNHcreative thank you for the answer. I want to use 150w. But I don't want to use maximum power. I think a 10 amp power supply will do its job. By the way, what size strap was used? I think 200m might not be enough if a big knife is used. I'm thinking 280m. If the belt is too long, will it affect the power? More precisely, do you think it has an effect on the rpm speed?
@@diacomservice The saw may operate weakly if the power source does not have enough capacity😉. The belt does not affect the speed. If you want to change the speed, you must change the transmission ratio.
@@diacomservice In my video, I use a 16-48 pulley, the gear ratio is 1/3, for example you can change it to 16-60, it will be slower but more powerful. As for your 775 motor, it's great! 😊
So much complicated assembly is not needed. Just attach the blade with 5mm shaft adaptor ,fix in the mid portion and attach switch and socket for pin. It will be simple😊
Subscribe channel❤ ruclips.net/channel/UCxm7Ku4ssO6LFpcfcnVWf1Q
Make a fence and precision set with protractor and push handle.... It would make out finest cut...
@@wiwakepandey9136 Thank you for your comments to improve the product. 😇
@@TNHcreative will be waiting for the upgraded video of the table saw
blade shaft kitne mm ka ?
buy link plz
@@ranjitbhatta1 8 मिमी आरा ब्लेड शाफ्ट, मैंने इसे नहीं खरीदा, मुझे वह स्टील बार मिला! यह पुराने पंखे का शाफ्ट है!
rod ka bare me nahi bol raha hu
wo jisme blade fit huya hai
black wala
Search on google :
-Saw Blade Connecting Rod
@@ranjitbhatta1Amazon pe milta he jitni mm ka rod hai utni hi mm ka shank adapter search karo mil Jayega 5mm se 14mm tak
Nice video... can you please listed all the materials you are using or provide a link to purchase? I have no idea how to search the material you shown just after the dc motor. And i can't find that steel shaft you are using.
Thank you for watching the video😊, you can search with the phrase "Pulley GT2" online and buy it, all the materials I have are in the video, and the saw shaft is an 8mm steel bar.
When you can attach a blade directly to the shaft why this belt ?
The machine runs fast, but when sawing it is very weak.
@@TNHcreative So if you attach a belt does it retain the speed ?
Some energy loss will be there through the belt but one advantage is the " shaft of the motor won't get damaged ".
I have shown in the video, everything has its principle, why I use a small pulley in the motor and a larger pulley in the shaft. If you find your design better, please share with everyone. ☺
@@TNHcreative OK. Agreed.
Hi, so you have a list?
Hello, all the parameters I have are in the video🙂
What is the wattage of the dc motor? thanks.
I found this motor in a drill, its capacity is quite large at over 180w
@@TNHcreative thank you for the answer. I want to use 150w. But I don't want to use maximum power. I think a 10 amp power supply will do its job. By the way, what size strap was used? I think 200m might not be enough if a big knife is used. I'm thinking 280m. If the belt is too long, will it affect the power? More precisely, do you think it has an effect on the rpm speed?
@@diacomservice The saw may operate weakly if the power source does not have enough capacity😉. The belt does not affect the speed. If you want to change the speed, you must change the transmission ratio.
@@TNHcreative transmission ratio ? Could you please explain this? By the way, my motor is 12v150w - I use max 15a then.
@@diacomservice In my video, I use a 16-48 pulley, the gear ratio is 1/3, for example you can change it to 16-60, it will be slower but more powerful. As for your 775 motor, it's great! 😊
My question why you use pulley please reply
Hello, your question is very good. I use a pulley because I want to reduce the gear ratio and increase the torque
@@TNHcreative please bro reply please please 775 DC motor 12v or car window motor 12v which is best for table saw please 🥺
@@IqbalKhanbh I use motor 775, pulley 16-48, you can see the machine works great! . As for the car window motor, I have never seen it before😅.
Thanks for watching😊
So much complicated assembly is not needed. Just attach the blade with 5mm shaft adaptor ,fix in the mid portion and attach switch and socket for pin. It will be simple😊
great good luck! 😇
🎉