How To Install Delta Shower Glass Door On A Bathtub
HTML-код
- Опубликовано: 8 окт 2021
- You want to make sure you have a bottle of clear 100% silicone, and a 5/16 tile drill bit, we had to purchase a Milwaukee glass drill bit. Take your time, watch this video and the process should be easy
website: Everythingresidential.house
instagram: Everything_Residential
Facebook: Everything Residential Хобби
Good vid. Pro tip: your tape measurer will have a dimension on it. Generally below the clip. So…if your tape measurer is 3”. Then use the box plus the tape to accurately get your measurements. Rather than bending the tape into a corner.
Really help a lot on installing our shower door. got confuse at first why the side rims was outside of the bottom railing instead of over the railing. Thanks
Great video. Tool suggestion though. With technology in carbide saw blades today. May I suggest using a miter saw with a aluminum cutting blade. Better accuracy and nicer cleaner cut. I use the Diablo blades, they have blades for aluminum and steel. Great video. Keep up the good work.
Great video... Very helpful
Thank you for the suggestion to drill the grout rather than one inch exactly
Yah Buddy!! Good job. Going to go get door now.
Great video guys only thing failed to be mentioned was the top rail has a top and bottom for door to roll on the inside we had to take doors down and flip it other than that good video
Super video guys
Thank bro now I have a better idea how
Yo guys thank you so much don't think I would have done as fast with out your video.
Not to a duoche but ya should use a leval as long as you can go for the piece leveling. A must for allt of things!! Good job buddy!
Thanks
I am getting a Sitka bathtub by signature hardware. The ledge on the side slants in towards the bathtub. I want to have a barn style frameless glass door installed and want to make sure there won’t be any issues with the installation since the ledge of the bathtub is slanted slightly. Do you know if this would work?
How do u get the high so is not to low or high?
Do you have delta part number for that glass shower doors thanks
I just installed the Delta glass not this model, but something similar is one glass supposed to slide even very easily and one supposed to be a little stiff?
They should both slide very easily,, maybe tighten the wheel at the top
Hello, Can you please tell us what was the model # of the Delta tub door you used? Thank you!
Can this go on a tub shower that has a 56” insert height?
Do you have link to this shower glass door delta ?
what if its leaking underneath the track thats on the top part of the tub. was just installed
Silicone
Are you able to post product model info or link?
When you go to Home Depot and go to the shower door section, they have a variety of options for your door. It’s kind of like a build your shower door so I don’t have a model number for you.
This Delta glass Door - I had it before and it worked fine - during the process of cleaning it - it shattered - So I went and bought another one - installed it again But now the doors wont close - i tried it several different ways what did I do wrong ????
Please Help
❤
So many questions. Did you put silicone one the bottom rail? Do you only tighten the side rail screws enough so the rail will slide on tight? do you silicon the side rails before you slide them on? Mine are loose when I slide them on. What sticks the side rails to the walls? Just the silicone bead you put on the inside of the side rails? Thanks for the video.
which delta model is this?
I have an issue that after finish, when I slide left to open the door, it slide right back to close it. It doesn’t hold its position.How do it fix it?
is it not level?
I’m thinking about this bypass door. I have an issue: what or how do you install the Uchannel against the shower wall, when there is a decorative rope tile across the shower? Do you sand it or how do you screw this channel onto the shower wall then this wall is not completely a flush flat wall or with a wavy tile or uneven style tile?
I would line up the u channel rail against the wall and mark both sides of it, then I would probably use a grinder with a tile cutting blade and spray water on it as you cut it to avoid dust,
@@everythingresidential thank you!
Which model is this?
Thanks fellas. What’s a fair price to pay someone to do this?
you can hire a handyman and pay around 300$, 6 hours of work @ $50 including drive time and fuel.
🙏🏼#VOLTINU ⚡️⚡️⚡️
“She thick”
SKIPPING THE DOOR INSTALLATION 🤷🏿♂️
O