HealTech QuickShifter Easy (iQSE) Install on Yamaha FZ1

Поделиться
HTML-код
  • Опубликовано: 13 июн 2018
  • The Healtech QuickShifter Easy (iQSE) is a magical little box that enables you to carry out super fast full throttle clutchless shifts.
    More exciting than that, you can also control and setup the quickshifter via Bluetooth with the app, allowing you to easily make tweaks and adjustments on the fly!
    Healtech have kindly provided me with one of these little smile-makers, so that I can try it out and show you guys what it's all about!
    More info about the iQSE Quickshifter Easy here:
    www.healtech-electronics.com/...
    So join me as I fit this wonderful little gadget to my Yamaha FZ1-N.
    00:25 - Intro
    01:05 - Fitting the Wiring Harness
    08:12 - Opening the Quickshifter
    08:32 - Fitting the Gear Shift Sensor
    11:15 - Connecting the Wires!
    11:49 - Mounting the iQSE unit
    13:12 - Bluetooth Setup
    14:17 - Setup Wizard
    16:20 - Settings rundown
    Thanks again to HealTech for the amazing support!
    [[------ NEW AMC STICKERS! -----]]
    Black Camera: bit.ly/AMCamblk
    White Camera: bit.ly/AMCamwte
    Black Mount Yin: bit.ly/AMCmntyinblk
    Black Mount Yang: bit.ly/AMCmntyangblk
    White Mount Yin: bit.ly/AMCmntyinwte
    White Mount Yang: bit.ly/AMCmntyangwte
    Black Set: bit.ly/AMCsetblk
    White Set: bit.ly/AMCsetwte
    FULL SET: bit.ly/AMCfullset
    -----------------------------------------------
    Get AMC's ALBUM here: bit.ly/AMCcd
    (includes channel theme tune: 'Happiness')
    -----------------------------------------------
    Support me through Patreon: www.patreon.com/andymancam
    -----------------------------------------------
    Stuff I use:
    Leathers: Jacket: goo.gl/5zg5Ao
    Trousers: goo.gl/n9jy6N
    Sony X3000 Action Camera: amzn.to/2GtfwyT
    Sony X1000vr Action Camera: amzn.to/2iIMIKU
    Sony AS200vr Action camera: amzn.to/2mvfYX9
    NOCO XGB3L Battery Pack: amzn.to/2wiK4k0
    NOCO XGB12 Battery Pack: amzn.to/2oPCC9M
    Ishoxs Bullbar: amzn.to/2gnLz8r
    SW-Motech 'City' Tank Bag: amzn.to/2xxNfmh
    SW-Motech 'Blaze' Panniers: amzn.to/2Iv3SEI
    3M Dual Lock: amzn.to/2KZRLRo
    Wera Tool-Check Plus ratchet set: amzn.to/2nqq6OB
    Leatherman: amzn.to/2nfNMrx
    Gear Gremlin Cable repair Kit: amzn.to/2nfI2ya
    --------------------------------
    Say hi on Twitter: @Andymancam
    AND Instagram: @Andymancam
    --------------------------------
    I am a participant in the in the Amazon EU Associates Programme & Amazon Services LLC Associates, an affiliate advertising programme designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk & Amazon.com
  • РазвлеченияРазвлечения

Комментарии • 303

  • @phillipsirmais828
    @phillipsirmais828 6 лет назад +3

    Had mine for two years now. Not a problem so far and so much fun.

    • @AndyManCam
      @AndyManCam  6 лет назад

      Thats very good to know. Cheers Philip! No surprises lurking around the corner!

  • @HepcatHarley
    @HepcatHarley 6 лет назад +1

    Recently fitted this to my FJR and without even bothering with the app settings it worked flawlessly :)

    • @AndyManCam
      @AndyManCam  6 лет назад

      Excellent! I've had it in defaults due to lack of time and it's also been great. I happily stand by Healtech stuff. Great products with awesome support.

  • @Blipthethrottle726r
    @Blipthethrottle726r 3 года назад

    I know you don’t have this bike anymore but I’ve just bought one and been watching all your videos on it, gonna be coming back to these mod videos as I add stuff to it over time.

  • @richardbanks725
    @richardbanks725 Год назад +1

    Again another brilliant video by you - as well as the rotor I fitted this heal tech gear indicator following your perfect instructions and was dead easy - massive thanks 👍

  • @Ninja1000sx.
    @Ninja1000sx. 6 лет назад +3

    Hi AMC
    I fitted one of these last year to my Triumph sprint St, it's preformed flawlessly ever since. One thing I did was set the rpm cut off to its minimum, this allows me to clutchles shift even in light traffic conditions

    • @AndyManCam
      @AndyManCam  6 лет назад

      Hi Arron. I'm really impressed with it so far too! I found it a little clonky at low revs, but that was without trying to fine tune. Quickshifts in traffic woud be nice!

  • @paulwyand6204
    @paulwyand6204 4 года назад +1

    I like that MGA! I worked on a 59 in high school working on the restoration. We did everything except the body work and the upholstery.

    • @AndyManCam
      @AndyManCam  4 года назад

      She's a beaut. I would entertain the idea of seeing if I could do something with it. But the I've met the guy who owns it twice and he looked at me like I fell off of the bottom of his shoe!!

  • @nathanpickett2221
    @nathanpickett2221 6 лет назад +4

    Just looked up this quickshifter thanks to your video, actually sells for a reasonable price compared to others in the UK. Look forward to the review vid!! 👍

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      It is very reasonably priced. And given the features it has and how well it's been working just on default settings, I'd say it's worth it.

  • @ianlawrie919
    @ianlawrie919 6 лет назад +2

    I was confident I could do this procedure myself till you progressed onto the Blue Tooth bit when I spontaneously wept. Great vid Sir

    • @AndyManCam
      @AndyManCam  6 лет назад

      Haha! It's really not too difficult, honest!! The app takes care of most of it, and I've been using the default settings created by the wizard since the install and it works great!

  • @kumarathomassen5031
    @kumarathomassen5031 5 лет назад +6

    Hey andy man, I fitted one on my fz1N and I used your video and it works perfect and it's realy sick on the road, I love it and I wished I had fitted it sooner. I use your video's a lot and you got a brilliant voice mate. Good luck and I hope to see more of your vids soon.

    • @AndyManCam
      @AndyManCam  5 лет назад

      Thanks Kumara! It’s an awesome piece of kit, I love mine too! Sure you’ll have plenty of fun with it and I hope the same with the videos!

  • @philliptapec8670
    @philliptapec8670 2 года назад +1

    After watching it made me fully understand on how to install and set up this device into my yamaha r1 thank you soo much for the time to record this video to help people like me 👍👍👍

    • @AndyManCam
      @AndyManCam  2 года назад

      My pleasure, happy to help! Enjoy!!

  • @russelllocke7180
    @russelllocke7180 6 лет назад +2

    Very interesting, love the ‘quick’ hands. Let the riding begin AMC.

    • @AndyManCam
      @AndyManCam  6 лет назад

      Cheers Russel! It's going well so far. Loved it in the UK. Sounds good on the vids too!

  • @Viper6-MotoVlogger
    @Viper6-MotoVlogger 6 лет назад +1

    Apart from the 8mm to 10mm fiasco, that is quite a cool device and easy install. The Bluetooth connectivity is brilliant. Ride safe mate.

    • @AndyManCam
      @AndyManCam  6 лет назад

      The Bluetooth is a real winner in my book. I hate delving under the seat more than i have to!

  • @highlandriders9696
    @highlandriders9696 6 лет назад +2

    Looks a great product. Seems simple install too. Looking forward to test ride

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      Very simple mate. Surprisingly so. I've got a few tweak tios direct from Healtech so hopefully should soon have it singing on song!

  • @streethawk_1617
    @streethawk_1617 6 лет назад +1

    i love this bike ! have it for 7 years now... went from FZ1n to fazer 1000 got a fairing from the US ! look even better... have a full yoshi system with pc5 and a pc QS its a blast on the highway...

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      It's an awesome machine. I can see me having mine for the same length of time! No interest in putting all that horrible plastic on it though! ;D

    • @streethawk_1617
      @streethawk_1617 6 лет назад

      doesnt look quite so bad ! have set you pics on your insta page ! check it out !

    • @streethawk_1617
      @streethawk_1617 6 лет назад

      plus help reduce windblast aswell !

  • @b_reyo
    @b_reyo 5 лет назад +2

    What a great video !
    Thank you very much for your work man 🙏🏻

    • @AndyManCam
      @AndyManCam  5 лет назад +1

      Cheers! Thanks for watching!

  • @davrac2008
    @davrac2008 3 года назад +1

    what a 1st class video, thank you. im looking for a quick shifter for my 2015 FJR, as i have god used to the quick shifter on my 2021 GSA

    • @AndyManCam
      @AndyManCam  3 года назад

      I don't think you could go far wrong with this one. Easily the best bang for buck!

  • @ninjanelly3506
    @ninjanelly3506 6 лет назад +1

    Looking forward to seeing the results on the road ol chap 👍🏻😎

    • @AndyManCam
      @AndyManCam  6 лет назад

      So far it's been very good. I've just gotten some tips from the manufacturer, so hopefully will get it shifting perfectly soon!

  • @johnsenkiw430
    @johnsenkiw430 4 года назад +1

    Ok ordered one for my FZ ...hopefully the installation goes as easy as yours...stay tuned

    • @AndyManCam
      @AndyManCam  4 года назад +1

      Cool, you’ll love it. Fingers crossed for an easy install!

  • @02bigkev
    @02bigkev 6 лет назад +1

    Well done. Looking forward to the ride vid.

    • @AndyManCam
      @AndyManCam  6 лет назад

      Cheers kev. Hopefully won't be too long!

  • @BIG-K
    @BIG-K 6 лет назад +1

    That is a very neat install and a slick demo, Andy. I hope your eating proves the pud, or something like that. Meanwhile, I wonder if they do one for my SWM.....
    👍

  • @johnsenkiw430
    @johnsenkiw430 4 года назад +3

    Well I must say it was straightforward to install with the help of this video, thank you .
    Two adjustments on the Bluetooth app and I am doing full throttle no clutch blasts ...unreal !

    • @AndyManCam
      @AndyManCam  4 года назад

      Awesome! Yeah it's a great piece of kit and childsplay to set up! Keep on shifting John!

    • @johnsenkiw430
      @johnsenkiw430 4 года назад

      Andy Man Cam Hey there me again . Now you have me thinking about lowering the bars an inch . I’m trying to decide if I should go the SV 650 rise with the stock bars or go all in with Rizoma risers and Rizoma Fatbars . I saw your vid installing your black, wide bars and I thunk you mumbled something about ...was it worth the effort . Thoughts .? John in snowy Denver Colorado USA

  • @jonathanwrightwright3113
    @jonathanwrightwright3113 4 года назад +3

    Never left a comment on anything before , having bought a bike with one on and watching your really brilliant video it has helped me understand everything about it , like I said brilliant , thank you Andy 👍🏻

    • @AndyManCam
      @AndyManCam  4 года назад

      Many thanks Jonathan. Very happy to have helped!

  • @TheDonInLondon
    @TheDonInLondon 6 лет назад +1

    Great video as usual love the corrections you added :) really need to get one of these for my new bike! Pleased it works so well...

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      Cheers mate. Yeah i didn't want to send anyone up the garden path with bad info! 😄

  • @Picha0098
    @Picha0098 19 дней назад +1

    Awesome explanation, subscribed!

    • @AndyManCam
      @AndyManCam  18 дней назад

      Thanks! Happy to be of service!

  • @5valvepete618
    @5valvepete618 4 года назад +2

    Good tubing man like umall. I've had the same universal tank prop come to hand so many times👍

    • @AndyManCam
      @AndyManCam  4 года назад

      Thanks very much Pete. I've got many 'universal' tools! 😜

  • @leduaracosta1569
    @leduaracosta1569 3 года назад +1

    Amazing video mate and now I understand much more the app as I didn't have a clue hahaha 👍🏽

    • @AndyManCam
      @AndyManCam  3 года назад

      Glad to hear it! Cheers!

  • @stephenmcqueen4029
    @stephenmcqueen4029 6 лет назад +1

    You have sold me, I need one of these on my FZ1 soon.

    • @AndyManCam
      @AndyManCam  6 лет назад

      I can only agree! I love it!

    • @AndyManCam
      @AndyManCam  6 лет назад

      I can only agree! I love it!

  • @motoventure_6938
    @motoventure_6938 6 лет назад +2

    Look forward to the test video to see the results and your thoughts mate!

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      Me too! So far VERY impressed. Few install changes to be made and then I can get on with it.

    • @mattfireblade9136
      @mattfireblade9136 5 лет назад

      It's no FZ1, but here is a full throttle test on a cbr1000rr: ruclips.net/video/PLcBnk6NFkI/видео.html

  • @thelikeablerider8800
    @thelikeablerider8800 6 лет назад +1

    Great install! You have awesome electro wizardry

    • @AndyManCam
      @AndyManCam  6 лет назад

      Cheers mate! I got it from my mama.

    • @reerbaadia1896
      @reerbaadia1896 6 лет назад

      Andy Man Cam
      My mama only taught me electrolytes from her struggle with weight her whole life.

  • @shergy657
    @shergy657 5 лет назад +1

    Great video mate 👍👍

  • @kevmcdevitt8755
    @kevmcdevitt8755 2 года назад +1

    i enjoyed this video, very well done. now i'm ordering one for my zx6r.

    • @AndyManCam
      @AndyManCam  2 года назад

      Cheers Kev! Happy quickshifting!

  • @supra1102
    @supra1102 6 лет назад +1

    Dein Englisch ist extrem gut . Mach weiter so , ich liebe deine Videos

    • @AndyManCam
      @AndyManCam  6 лет назад

      Vielen Dank! Werde ich machen. Leider ist mein Deutsch nicht so ganz gut! Läuft, aber wackelig und fehlerhaft! :D

  • @MrBeerscuits
    @MrBeerscuits Год назад

    Great video, I own a FZ1 for about 3 months now, time for some mods hehe

  • @SantaridesaKTM
    @SantaridesaKTM 6 лет назад +1

    Great Video.

  • @luigiemotoblog.7700
    @luigiemotoblog.7700 4 года назад +1

    Hello Andy
    great videos
    you know i have a fz1 motorcycle
    and your videos have helped me a lot
    I liked this because it is encouraging me to put a quickshifter
    to my bike
    only I would like you to make a video where you see how it works.
    Sorry but my English is good and I am using a translator.
    Cheers.

    • @AndyManCam
      @AndyManCam  4 года назад

      Thanks Luis! Well the shifter is installed in every single video since this one, so you can see it working every time I accelerate. Though maybe I should put together another video actually reviewing the function.

  • @gatito339
    @gatito339 4 года назад +1

    great video made,thank you.

    • @AndyManCam
      @AndyManCam  4 года назад

      Thank you too! Glad it was helpful!

  • @garthhowe297
    @garthhowe297 6 лет назад +1

    It will be very interesting to see how reliable the shift sensor is in the long run.

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      Very true. And that's what I'm here for!

  • @showtime7979
    @showtime7979 4 года назад +1

    Glad to see this video was thinking to put one on my suzuki hayabusa you just confirmed it thanks, and you just gain a sub you have great videos 👍🏾

    • @AndyManCam
      @AndyManCam  4 года назад +1

      Thanks Show Time and welcome to the team! I've been loving every minute of having the shifter on the FZ1!

  • @stuart0604
    @stuart0604 6 лет назад +1

    Been thinking of getting one for a while....you just made me order one lol hope it works 😲😉👍

    • @AndyManCam
      @AndyManCam  6 лет назад

      Haha! The mind control is working! I think it's brilliant. And i haven't even started fine tuning the settings yet!

    • @stuart0604
      @stuart0604 6 лет назад

      I fitted it the other day its awsome fun, hoping to tune it a bit today although it works pretty good out the box

  • @nemindakarunaratne2291
    @nemindakarunaratne2291 Год назад +1

    Thanks a heap for that

  • @fibroboy1604
    @fibroboy1604 6 лет назад +1

    Just about to stick one on my R1 this week.

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      Very nice. Even without fiddling, it sticks a fat grin on my face every time!

    • @fibroboy1604
      @fibroboy1604 6 лет назад

      Andy Man Cam I have one on my r6 track bike and it’s so much fun on track. Not sure I’m any faster right enough 😂

  • @northernninjarunner5506
    @northernninjarunner5506 4 года назад +1

    If you hadn’t got the gag the beautiful assistant is actually me 🤣 🤣 🤣

    • @AndyManCam
      @AndyManCam  4 года назад +1

      *Disclaimer: 'Beautiful' is a flexible and often inaccurate term.

  • @wookie153
    @wookie153 6 лет назад +1

    Looking forward to the test video. Lots of good audio please as I love the way bikes sound going through the box (insert joke here) with a quick shifter fitted.

    • @AndyManCam
      @AndyManCam  6 лет назад

      You and me both mate! I'll do the best i can. I agree though, i love the sound of a 0.7 second shift!

    • @favian3380
      @favian3380 4 года назад

      @@AndyManCam test video never came?

  • @Knighthawk916
    @Knighthawk916 6 лет назад +1

    I reckon youre from the planet healtech ;>)

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      Wouldn't be a bad planet to be from! All that gadgetry! 😍

    • @AndyManCam
      @AndyManCam  6 лет назад

      Wouldn't be a bad planet to be from! All that gadgetry! 😍

  • @simuppal2439
    @simuppal2439 4 года назад

    Hello Andy hope you are doing well i bought an used fz1 N 2008 and it has quickshifter on it from healtech but i connect bluetooth app on it what should i do to make it work it is connected and it shows red light when the ignition is on but doesn't shows green light.

  • @stavencapp
    @stavencapp 5 лет назад +1

    Man how'd you get such a hookup from healtech with only 19k subs. Lucky

    • @AndyManCam
      @AndyManCam  5 лет назад +2

      What do you mean ONLY 19k?! Ultimately I know the answer. Healtech like the quality of my videos and how I review the products! Good content wins through!

  • @rohitnarayan3966
    @rohitnarayan3966 4 года назад +1

    Nice video! Let say you don’t want to use the quick shifter, can you use the clutch to shift with out installed jumper?

    • @AndyManCam
      @AndyManCam  4 года назад

      Thanks! Yes you can use the clutch completely as normal.

  • @johnmangsx
    @johnmangsx 4 года назад +1

    Hey man awesome job! Where did you get the little carbon front fender extension

    • @AndyManCam
      @AndyManCam  4 года назад

      Thankd John! It was from ebay. A little company in Spain I think. Cactus composites or something like that.

  • @valooshelb
    @valooshelb 2 месяца назад

    My english is bad, sorry. Your video is really great, thank's a lot ! I've just one question, the cable on the motor and near the radiator, there's no risk to burn ? Cause it really hot at this place, no ?

  • @fersbk
    @fersbk 5 лет назад +1

    excelente !!!!!

  • @vishalprajapati8840
    @vishalprajapati8840 2 года назад +1

    Great video. Thanks for that. Can I ask a side question what handlebar mirrors you have on that bike?

    • @AndyManCam
      @AndyManCam  2 года назад +1

      Thanks! They’re Highsider Ferrara mirrors. Not available anymore i don’t think, but check out www.louis.eu for newer Highsider stuff.

    • @vishalprajapati8840
      @vishalprajapati8840 2 года назад

      @@AndyManCam Thanks. I bought some Gazzini also from Louis. Unfortunately they vibrate a lot. Do handlebar mirrors generally vibrate a lot, and how are yours ? :)

  • @Diego87
    @Diego87 5 лет назад

    si la moto es de 1 cilindro (ejemplo ktm rc 200 o 390), ¿qué se hace con el segundo conector de inyector, se pone el plug que viene para taparlo, se deja libre, qué se hace?

  • @Silbermorfar71
    @Silbermorfar71 Год назад +1

    Hi Andy Man, i know you don't have the FZ1 anymore, but i saw the vid, class one and want to hear you, if there was any problems with the QS anytime?
    I want to buy one too for my FZ, but had some big issues with my Blackbird, so just wanna get some input 😊
    Keep up the good work, greetings from Denmark👋🏼👋🏼

    • @AndyManCam
      @AndyManCam  Год назад +1

      Hi Andreas. The only issue i had was that I cracked the sensor by tightening it too much when i adjusted the gear lever later on. It would sometimes do strange things when it was really wet. But Healtech very quickly diagnosed the problem and sent me a replacement shift sensor. Otherwise, all smooth sailing!

  • @christophergothard7277
    @christophergothard7277 6 лет назад +1

    Look forward to seeing how well it functions soon. Nice install vid though!

    • @AndyManCam
      @AndyManCam  6 лет назад

      Thanks very much Christopher! It was a pretty straightforward job TBH, given how complicated and hi-tech the product is! Plug in and GO!

  • @bikersquest
    @bikersquest 6 лет назад +1

    The coils on this bike are real tough to get to, I had to remove some to diagnose a misfire and man was it tough with seized in caps.

    • @AndyManCam
      @AndyManCam  6 лет назад

      I guess spinning them round to plug in a connector and removing them altogether are two very different things! I imagine that would be a bit of a pain in the bottom.

  • @Gregory_Kousman_8
    @Gregory_Kousman_8 Год назад

    Hello my friend I would like to ask you? The quick shifter use in the gearbox for Up&Down or just Up? Thank you

  • @SINIS0RSA
    @SINIS0RSA 6 лет назад +2

    In the next episode we will see Andy installing a surface to air missile system on his Yamaha fz1n.

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      Haha! That would be ideal for the stupid cagers over here that won't let me filter!

  • @bonabry65
    @bonabry65 2 месяца назад

    I bought a 2020 GSXs 1000 from a private party … he had installed the Healtech QS. Although the QS works great when engaged, there are times when after I stop and cut power to the bike, the unit does not engage and connect to Bluetooth once I start the bike back up causing the QS not to work. Can anyone explain?

  • @cornish_boy6235
    @cornish_boy6235 6 лет назад +1

    Have been waiting for this, do you think healtech will do any discount if we quote you?

    • @AndyManCam
      @AndyManCam  6 лет назад

      I don't know. I can certainly ask!

  • @nac5000
    @nac5000 4 года назад +1

    so you can configure to always have this enabled and you will never used the clutch just on full stops right?

    • @AndyManCam
      @AndyManCam  4 года назад +1

      You can, but it gets very lumpy and clunky at lower revs.

  • @fabiomarzulli4257
    @fabiomarzulli4257 3 года назад +1

    What are the best setting you ended up to use on the quickshifter for your Fz1?
    I'm gonna fit an Healtech on mine as well.
    Thanks for your help... Lamps

    • @AndyManCam
      @AndyManCam  3 года назад

      TBH, i just left everything on the default Settings, and it seemed to work perfectly.

  • @Ya-8OY-Tim
    @Ya-8OY-Tim Год назад

    Would this near enough be the Same for the fz6?

  • @trykozmaksym
    @trykozmaksym 6 лет назад +1

    That's a mouth-watering piece of engineering... But how does that sensor work? I thought it's some kind of piezoelectric... but the way it's mounted - is there some crazy accelerometer/gyro inside?

    • @trykozmaksym
      @trykozmaksym 6 лет назад +1

      Is it possible to disable quickshifting between 1st and 2nd ?

    • @AndyManCam
      @AndyManCam  6 лет назад

      I'm honestly not too sure. I think it deals with compression, or lack thereof. So how much it's being squeezed. I don't think you can disable shifts between 1 and 2. Only below a certain rev range. Though I've found even shifts between the first 2 gears to be far better than expected.

    • @trykozmaksym
      @trykozmaksym 6 лет назад

      That thing must be very sensitive because the compression probably changes very little - because of the splines. Have you had any "misfires"? How consistent is the shifting?

  • @dom_petrolhead9165
    @dom_petrolhead9165 3 года назад +1

    Hey man nice video. Im just thinking my bike need the same upgrade. So my question is it still working? How is your feedback after 2 years?

    • @AndyManCam
      @AndyManCam  3 года назад

      It was working flawlessly right up until when I sold the bike about a month ago.

  • @robsonITALY85
    @robsonITALY85 2 года назад +1

    gruß aus Bremen🖐

  • @user-mh3qm1vh1f
    @user-mh3qm1vh1f 2 дня назад

    So if 4 cylinder, it doesn't matter which coil the red/white wire set connects to?

  • @ced67660
    @ced67660 7 месяцев назад +1

    hello nice job , i have the same bike , is it possible to have your settings ? thank you

    • @AndyManCam
      @AndyManCam  6 месяцев назад +1

      Cheers! Thats easy. I left everything on default!

  • @droneshotsetc572
    @droneshotsetc572 5 лет назад +1

    Where did you get the carbon fiber radiator side covers. I cannot find any to replace mine that are destroyed.

    • @AndyManCam
      @AndyManCam  5 лет назад

      It was from F&F Carbon. Here's the video ;D ruclips.net/video/9-faYjojOWU/видео.html

  • @sergiosergio471
    @sergiosergio471 2 года назад +1

    Thank you!! yesterday i buy this QuickShifter for my fz1! how is your feeling when you ride with QuickShifter?

    • @AndyManCam
      @AndyManCam  2 года назад +1

      My pleasure, enjoy it! I love the feeling with the quickshifter. Almost like I’m a better rider than I really am! 🤣

    • @TK1.3.1.2
      @TK1.3.1.2 2 года назад

      @@AndyManCam hi :)…very helpful clip.thanks for the instructions:).
      Just received my QS…i was wondering about step 6.the sensor setup.
      Im on kawasaki z1000.and im in Neutral…i need to go to first gear and then do 3 up shifts?,or its ok to set it up when im in neutral and do 3 upshifts.
      Thanks :)

  • @exothermal.sprocket
    @exothermal.sprocket 6 лет назад +1

    Finally a motorcyclist that knows how to speak.

    • @AndyManCam
      @AndyManCam  6 лет назад

      Hahaha! I've been practising since i was little! 😉

    • @AndyManCam
      @AndyManCam  6 лет назад

      Hahaha! I've been practising since i was little! 😉

    • @exothermal.sprocket
      @exothermal.sprocket 6 лет назад +1

      Whatever system you used, it worked.
      Others be like, "Uuuugh and and and uuuugh and like, this like, that and like, uuuugh ughhhh, now we can go ahead and.....and then go ahead and......and now we're going to go ahead and...... uuuuugh ughhhhhh. And it was like, I was like, and ." xD

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      Well thanks for noticing. I try to bring a little bit more eloquence to the field. I also don't see the point in constant cursing. I swear, but you don't need to hear it! Plus my mum watches these videos!

    • @exothermal.sprocket
      @exothermal.sprocket 6 лет назад

      Exactly. Cussing is no substitute for wit.

  • @TheSkidrowww
    @TheSkidrowww 4 года назад

    hi what are your settings in QS

  • @comfysofa1549
    @comfysofa1549 4 года назад +1

    Not sure if i missed anything but does this cater for some stuff that needs to stay on? ie a battery backed gps tracker??

    • @AndyManCam
      @AndyManCam  4 года назад

      How do you mean? The QuickShifter shouldn’t have anything to do with those. I’m guessing that youtube shunted you on from the Thunderbox video? I guess if something really needs to stay on, you’d have to go direct to the battery. Though if it’s battery backed, this means that you’ll not need to worry about it killing your battery. Don’t most trackers last for months before they need another charge?

    • @comfysofa1549
      @comfysofa1549 4 года назад

      @@AndyManCam Heh - yes....ironically ive had a healtech qs for years on my hypermotard....so yes it was in relation to the other video - my apologies...

  • @davidhall370
    @davidhall370 6 лет назад +1

    When are you changing the frame , wheels and engine ?

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      As soon as i find carbon ones that i can afford! 😂

  • @pineapplejelly1005
    @pineapplejelly1005 3 года назад +1

    How do downshifts work with this?? Can you clutchless downshift because it blips for you or do you need to blip yourself??

    • @AndyManCam
      @AndyManCam  3 года назад

      You have to blip for yourself I'm afraid. The bike really needs to have a ride by wire system to allow for a blipper.

  • @Henka-mxpartsse
    @Henka-mxpartsse 4 года назад +1

    Thanks for a great video! Where did you buy your winscreen? I just bought myself the same bike.

    • @AndyManCam
      @AndyManCam  4 года назад

      Many thanks! I got it from www.louis.com although i find it quite noisy.

    • @Wave1dave
      @Wave1dave 3 года назад +1

      Hi Henrik, I am thinking about buying one for my FZ6. I know Andy didn't like it that much because of the wind noise, I want to get it on my bike mainly to protect all the gadgets mounted on the bars. Do you find it loud and annoying as well?

    • @Henka-mxpartsse
      @Henka-mxpartsse 3 года назад +1

      Hi! I did not buy a windscreen yet for my bike yet :) maybe latee this summer after ived recieved my license 😅

    • @Wave1dave
      @Wave1dave 3 года назад +1

      Guess I'll take the risk then. Thanks and ride safe!

    • @Henka-mxpartsse
      @Henka-mxpartsse 3 года назад +1

      The same to you! Ride hard but safe!

  • @luigiemotoblog.7700
    @luigiemotoblog.7700 4 года назад +1

    A favor could you send me the model or as I ask to see if I can get it here in Mexico.
    where did you buy it?

    • @AndyManCam
      @AndyManCam  4 года назад

      Hi Luis. Have a look on www.healtech-electronics.com/ there you‘ll be able to find the right model for your bike and also see if there are dealers and distributors in Mexico. 👍🏻

  • @jamob33
    @jamob33 4 года назад +1

    One question, what is if i shift with the clutch an the quickshift is mounted ?

    • @AndyManCam
      @AndyManCam  4 года назад

      Hab ja schon direkt geantwortet, aber für das gemeinsames Publikum: Works completely normally with the clutch. Sometimes during downshifting, the ignition can be cut just as you blip the throttle. Happened to me a little bit, but I've since learned to 'ride around it'. You can actually turn off the downshift behaviour completely, but for this you have to mount the shifter sensor slightly differently and turn off some settings through the Smartphone App.

  • @K-carbon
    @K-carbon 4 года назад +1

    Great video so easy on your bike on wiring that up on a zzr1400R hell no 😩

    • @AndyManCam
      @AndyManCam  4 года назад

      Thanks Tom. Yeah I guess thats one of the real benefits of having a naked bike!!

  • @nathr2012
    @nathr2012 5 лет назад +1

    Did you ever make a video testing this out and playing with the settings?!

    • @AndyManCam
      @AndyManCam  5 лет назад

      Not yet, but even if I have to do it in driving snow, I’ll have a video finished before christmas!!

    • @nathr2012
      @nathr2012 5 лет назад

      Andy Man Cam excellent news I look forward to it!

    • @2WheelsSometimes1
      @2WheelsSometimes1 5 лет назад +1

      Thank you very much mate! I just came upon your channel as I am looking to get a Healtech Easy QS too for my MV Agusta F4, which will use the same setup for the sensor as yours. Liked your video, you got a subscriber here for sure. Looking forward to hopefully a great review of it.

    • @AndyManCam
      @AndyManCam  5 лет назад

      Thank you Twowheelshredder! Glad to have you on board mate! Nice bike btw! I bet you’re watching the 44 Teeth BBBI with rigid anticipation!?!

    • @2WheelsSometimes1
      @2WheelsSometimes1 5 лет назад

      With great anticipation!!! Don't get me wrong, I am actually a big fan of the 999 styling, but... It's still not an MV.

  • @user-jc3rv5st3m
    @user-jc3rv5st3m 3 года назад +1

    Help, my sense value is always too low
    I uninstalled the sensor, and squeeze it out really hard, I only get 19% of sense value, I didn't install it too tight.
    I didn't run the set up at the beginning, is that what causes the problem?

    • @AndyManCam
      @AndyManCam  3 года назад

      I'm afraid I'm not the expert. Contact Healtech and I'm sure they'll help you out.

  • @stuartracing1
    @stuartracing1 3 года назад

    Will it work with GP shifting setup....Reverse shift???

    • @AndyManCam
      @AndyManCam  3 года назад +1

      Yes, it works in both directions.

  • @TheKiller6364
    @TheKiller6364 4 года назад +1

    Did you have to make any changes afterwards or are the adaptive (automatic) settings fine?

    • @AndyManCam
      @AndyManCam  4 года назад +1

      I have had everything on the default settings (adaptive) for the whole time and it works just great!

    • @TheKiller6364
      @TheKiller6364 4 года назад

      @@AndyManCam Ok sounds great, thanks for your reply!

  • @gregparkes8089
    @gregparkes8089 5 лет назад +1

    Hi andy, just a quick one I’ve just bought one of these for my R6 and just want to know does it do down shifts? I know it won’t blip but does it do the ignition cut?... also how did you find out the best kill time settings?

    • @AndyManCam
      @AndyManCam  5 лет назад

      Hi Greg. If your shifter rod is in the right orientation (push or pull, I can't remember) then it will cut the ignition for downshifts but, as you say, it won't blip. This means it doesn't make for the cleanest downshifts and I have found that sometimes it actually kills the ignition at the exact moment I've wanted to blip the throttle. You can install it so that this doesn't happen, and I'll be doing that as soon as it's warm in my garage!! TBH with regards to the settings, I still have everything on adaptive and defaults!! Seems like the best place to start! But the App gives you tips on what each setting does and also what changing the setting will affect.

    • @gregparkes8089
      @gregparkes8089 5 лет назад

      Andy thanks for the response... just a last one how do you install it to stop it doin it? Because I’ve seen loads of places that you can put the sensor... FYI I have standard shift in place

    • @gregparkes8089
      @gregparkes8089 5 лет назад +1

      Andy.... when you plugged the piggy back plugs in is their an order in which they should go? Like are they numbered? Also the 2 plugs with the red marker on do they both plug into the same coil pack or do you split them between 2 coil packs? Or and lastly does the red marked ones have a specific coil to go on? Thanks.

    • @AndyManCam
      @AndyManCam  5 лет назад

      As far as I remember, they’re not numbered but they are paired. So each pair has to go to the same cylinder. The marked plugs are important but I forget why. I mentioned in the video somewhere!

  • @nathangreen7479
    @nathangreen7479 11 месяцев назад +1

    Andy do you rate it, is it something you will add to all your bikes

    • @AndyManCam
      @AndyManCam  11 месяцев назад

      Definitely. I simply didn't fit one to my Honda CB1000R because I was waiting for the warranty period to be up (and then sold the bike!). With the KTM i just didn'T have the time, was about to get one and fit it and some kind soul decided to run in to me in town. Now my replacement bike already has a factory quick shifter fitted. Otherwise, I really rate this quickshifter very highly!

  • @kyleAsmith19
    @kyleAsmith19 6 лет назад +1

    How does it work between 1st to 2nd. With neutral inbetween, i wonder how it would react.

    • @AndyManCam
      @AndyManCam  6 лет назад

      As long as you're direct and firm, it's surprisingly good! If you tickle it, you can hit a neutral. But shift with intent and it goes in every time.

    • @BikenutGB
      @BikenutGB 3 года назад

      @@AndyManCam That's what she said

  • @MrBenoJacko
    @MrBenoJacko 4 года назад +1

    Did you do a testing video? Cant find it anywhere!?!?!?!

    • @AndyManCam
      @AndyManCam  4 года назад +1

      No, sadly not yet. Though it’s still on the bike so I’ve been ‚testing‘ in every video since! 😜

  • @justastulpe3265
    @justastulpe3265 7 месяцев назад +1

    Hi, does it work for upshift and downshift?

    • @AndyManCam
      @AndyManCam  5 месяцев назад

      It does. But there’s no blipper, so downshifts aren’t rev-matched.

  • @Cichymoto
    @Cichymoto 6 лет назад +1

    Can you specify your iQSE settings?

    • @AndyManCam
      @AndyManCam  6 лет назад +1

      At the moment, everything is on default, with my sensor threshold at 70% I'll be getting into it in more detail soon though.

  • @JDRides
    @JDRides 3 года назад +1

    I have a doubt and i would greatly appreciate if you could clear this for me as its kinda eating my brain.
    i have a 2016 MT09 and I am getting a PC5 since I have got an M4 and a K&N installed. I have also ordered the healtech Qs that you installed. will they work together without causing any issues? should I go for the dynojet qs instead?

    • @AndyManCam
      @AndyManCam  3 года назад

      I'm afraid I don'T know for sure. If they use the same connections, then you'll likely have problems. I'm pretty sure that the PC5 has pass through connections for extra accessories, but I doubt if they've allowed for other brand stuff to work with tis feature. Maybe an email to Healtech would clear things up. They're usually very knowledgeable and extremely helpful.

    • @JDRides
      @JDRides 3 года назад +1

      @@AndyManCam I shall do that. Thank you buddy

    • @AndyManCam
      @AndyManCam  3 года назад

      Hope you get some good answers.

  • @knokcs
    @knokcs 5 лет назад +1

    at the very end, this stuff work?? no test of this installation?

    • @AndyManCam
      @AndyManCam  5 лет назад

      This is an installation video. Says so in the title. 🙄. Lots of usage in riding videos after this though. And #SpoilerAlert, it works very well and I love it very much.

  • @wiley5oh51
    @wiley5oh51 4 года назад +1

    Does it have to be full throttle for the quick shifter to work?

    • @AndyManCam
      @AndyManCam  4 года назад

      No, not at all. As long as you're accelerating, it will work. Obviously the harder you're accelerating, the better it works. 😜

  • @johnhomles2711
    @johnhomles2711 4 года назад +1

    One thing I wondering if u set a quick ie 7000rpm dose the quick shift still work if revs go past or lower rpm .as it's hard to check rpm when rideing ?

    • @AndyManCam
      @AndyManCam  4 года назад +1

      The RPM setting is a cutoff. So it will not work below those RPM but will work above. I have mine set at 3000rpm, so it will not work from 0-2999rpm, but anywhere from 3000 - redline, the shifter will operate as normal. I've never really had to check the revs as you just get a feel for where the shifter cuts in.

    • @johnhomles2711
      @johnhomles2711 4 года назад +1

      @@AndyManCam top man andy I better get on orderd

    • @AndyManCam
      @AndyManCam  4 года назад

      No problem! Have fun with it!

    • @johnhomles2711
      @johnhomles2711 4 года назад

      @@AndyManCam 🙂

  • @predragsim6356
    @predragsim6356 Год назад +1

    can it change gears down or only up?

    • @AndyManCam
      @AndyManCam  Год назад

      It can change down and up, but doesn’t blip the throttle, so downshifts will be a bit jerky and probably not great for the gearbox.

  • @nikosdiamantisengravings1242
    @nikosdiamantisengravings1242 5 лет назад +1

    Which are the best settings for fz1?

    • @AndyManCam
      @AndyManCam  5 лет назад

      So far I just have the settings on default!

  • @Vickeviren
    @Vickeviren 4 года назад +1

    At what RPMs does it work smooth? :) Thx

    • @AndyManCam
      @AndyManCam  4 года назад

      I have mine set to come in at 3000rpm. Between 3000 and 4000 it's a tiny bit clunky, but over that it's buttery smooth.

  • @DrDonatoDONI
    @DrDonatoDONI 3 года назад

    How about downshifting??

  • @folerx
    @folerx 20 дней назад +1

    why you mount sensor on arm and not on rod?

    • @AndyManCam
      @AndyManCam  20 дней назад

      Because that’s what the instructions say to do.

  • @omurersin5595
    @omurersin5595 5 лет назад

    Hi sir,
    Did you get any issue with Healtech QS.
    My friends said that after a while they experienced transmission problems after 1000KM.
    They said that 3 pieces gears were damaged and had to change.
    Waiting your asnwer soon..

    • @AndyManCam
      @AndyManCam  5 лет назад

      Hi Ömür. No, I've had no problems at all after almost 10,000km. Everything is still working fine. Is it possible that your friend had the shift interval set too short, so that the power was coming back in before the gear was properly engaged? It would make for a faster shift, but also a much higher risk of the gearing parts smashing against each other.

    • @omurersin5595
      @omurersin5595 5 лет назад +1

      Thank you very much sir.
      I have CB650F / year 2016.
      I always used auto cut off time 80-85 ms.
      But I always had doubts. Have you every adjust your cut-off times ? Or used the adviced one from application like i did ?

    • @AndyManCam
      @AndyManCam  5 лет назад

      I have the cut off times still set to the default values. Seems to work great.

  • @BMRTV
    @BMRTV 6 лет назад +1

    Who's BMW Airhead is that? Andy Man Cam explores?

    • @AndyManCam
      @AndyManCam  6 лет назад

      Sadly not. Thats the guy i share the garage space with.

  • @aleks_the_Great13
    @aleks_the_Great13 4 года назад +1

    Is this working on up and down shifts?

    • @AndyManCam
      @AndyManCam  4 года назад +1

      Yes, although it doesn’t have a blipper so the downshifts can be a bit clumsy.