Just installed this past Saturday. You guys are great. Planning to order the headers and high flow cats next. Then bring it to you guys to tune and Dyno.
Great video, can I just say that z1 is one of the reasons I got a 370z, the ease of use from the website and the potential that I saw in the VQ engine really sold the deal for me. I love my PW Nismo and thanks for making great products guys! Love from Cali
Sooo, why cant you just do a test on a stock car? You pic a car with a $1500 exhaust, a lightweight flywheel!, and test pipes. What is the point?? I think most of use would like to see results with a stock car. Most of us don't have lightweight flywheels btw.
Just installed on my 370z! Excited for the first drive out tomorrow! One thing that I thought was a nice touch in the kit was the shorter bolts supplied to replace the factory near the radiator stay. The only thing I'd change would be some color instructions with a few more photos. Found myself just not using the instructions and going for it, until I found that there's ONE bolt that holds in the stock intake reducer snorkel thing (fought with it for a while, and then figured out finally that there's a bolt holding it in / stupid me). One other thing: Does Z1 sell a PCV delete kit to breathers? I felt bad putting that junk back on but luckily my TB's are pretty clean at this point.
nice to see a new product but the maf sensor should never be on the bottom of the tube to mitigate water droplets while driving through heavy rain, should not be placed at the absolute top either due to condensation.
Love the intakes I'm a happy Z1 customer. ..reppin south Florida. ..those motor mounts made a world of difference in my G37 sport...pop chargers next and uprev tune
The fact you dont have to drill is slightly more intriguing than the Stillen honestly. But also I do think that having Test Pipes probably inflates the numbers a little more. I have an exhaust only so I assume it wouldnt be as big of numbers.
@@MrModdedgear I just feel like people dont preview their uploads... 9/10 times i cant hear what people are saying over the music because the music is at like +9db and voices being at like -1db
Since the m-spec high flow intake doesn't directly fit the G35, could I get it installed with you guys? I've been holding back on the purchase due to this issue.
Just have mine installed. Wow....what an intake 🙂 what an intake 🥰 what an intake 🤩😍👌 👏....really wake up the car. It is a slightly louder in a good way, more responsive for sure, faster and I get better gas mileage as well. Can't want to get my Z1 header from them. They're very professional and their respond back time are quick.
I noticed that when you mention Will’s car, the caption states Greddy Evo 2 and you reference his car from the other video promoting the Greddy Evolution GT exhaust. Is this a typo? I’m interested in the Evolution GT so i just want to be sure which is used in the sound clip. Thanks!
@z1motorsports Just installed these on my 2007 G35-s Sedan, Curious if there is any risk of driving in heavy rain with these? I know the Stillen kit comes with a shield, but the Z1 does not.
What do you guys charge to do the exhaust, intake and tune, parts and labor on stock 370? 2014, Automatic, bone stock. Has sport option but don’t think that matters. I’m not worried about flywheel upgrade, that sounds really expensive. You’re west of atl right?
Jon, we are west of Atlanta just off of I20 in Carrollton. As far as parts and labor, it really depends because you have quite a lot of exhaust options, a few on tuning as well. I'd recommend giving us a call at (770) 838-7777 and get ahold of Jon, he's our in-house tuner and will be able to help you find what combination works best for your budget. For labor we'd have to get you over to our service department.
Chris James wondering how the testing went on the custom 3 inch intakes they tested vs stillen g3 or z1...must not of been good power gains on 3 inch intake that was made or I’m sure we would of heard about it lol. Video on that would be sick. And I mean sick.
Anyone up here install this Z1 CAI on their 370Z or G37 Coupe sedan? If yes, what brand hydroshield you use? And any and problem when washing your car?
@@mikeschafer4440 I ended up finding some k&n pre filters that fit nicely over the z1 filters so I havent had any issues at all just watch out for deep puddles.
Duo Maxwell installation took me 2 1/2 hours but that’s because I took my time. You can hear and few a difference right away around 5k. Still haven’t gotten a tune and still works great.
@Z1Motorsports ,Just have one question, is water still an issue when it rains? Placement behind the grill is not a concern at all for the g37s sedan? I can see it may not be an issue for the closed face Z.
Yes, if you want to clean the filters you will need to remove the fascia, just like with any other cold air intake. This is a simple task and only requires the removal of the front undershroud bolts, and a few bolts accessed through the fender liners. We've done this laying on the floor in our dyno bay and is very simple.
Great video.. Will they fit 2014 Q50 3.7 and if they do how can I get my hands on them? I email your company and they said not sure??? In the video you mentioned that it would fit the Q50 so just curious..because I would like to purchase them.
Devin here - It would be interesting to see similar tests with the DE. The m-spec intake comes with a K&N filter with no integrated velocity stack. The Z1 intakes for HR come with integrated v-stacks, so it seems the DE would benefit more from a v-stack than the VHR in this video. I installed the v-stack on my DE with the m-spec race intake, and noticed decent gains on the butt dyno - can't wait to get it retuned, and see what it puts down.
@@LuisGonzalez-vx1oo I would say it did. I have the Z1 race intake and had to modify the crash bar for clearance. There are a couple other intakes that include v-stacks though for the DE, like the PopCharger or Z1 short tube intake. I can't really mention any specific numbers since my last retune a couple years back was for several changes.
Hey guys..I want to increase Horsepower In my 350z 2008. i have 3k only. Please suggest the things i can do with this amount. What shud i add in engine? Plz help if u have a strong background in this area
New to the 370z game. I have a 2017 370z Nismo. Do I need to cut the bumper to fit this mod on my car and do I need to take my bumper off to clean the filter?
Hey Edward, the crash bar will need to be modified for the larger filters, but the bumper cover itself will not need to be cut. You will need to remove the bumper cover to clean the filters, but because they're tucked up under the fascia they're in clean air and don't get dirty too quickly.
@ no, they answered a couple, also it doesn't "ruin" your engine that bad but it might stall so better be safe than sorry and get a water shield, Look up 22-2030PR on the k&n online store
Be easier to listen if it didn’t sound like a squirrel getting railed in the background.
Alexander Lindsey 😂😂
Alexander Lindsey I’m
Dead😂😂😂💀💀
i fcuking DESPISE this childish sample chopped juvenile music in videos! FAK! i'm 34 not 18 ffs!
lmfao
😂😂😂😂😂😂
"super easy install" takes bumper off
"Super easy install" cuts, modifies and welds crash bar
@@eddiegarcia1560 I think they sell that crash bar lol but nothing is SUPER easy install on the Z lol easy yes super easy no
I remove my bumper so much, i just use zip ties😂
You guys have bumpers?
@@vally6853 same lmaoooo
Great video and thorough testing from Z1.
Thank you sir!
@@Z1Motorsports23 BOTH OF Y'ALL ARE LEGENDS
Was going with stillen... But just changed my mind.Thanks
Same
thats super impressive. oem flows pretty good too. stunned you got that much of an increase
Video's are looking better than ever, keep up the good work.
That was the best vid I've seen you guys put out. Personality and performance.
Just installed this past Saturday. You guys are great. Planning to order the headers and high flow cats next. Then bring it to you guys to tune and Dyno.
When its time for my build, I will definitely be working with you guys.
Love the vids.
Looking forward to it! Let us know.
Just ordered mine looking forward to installing 🤙💯🔥
What is the name of the chipmunk song in the background. I think the name of it is chipmunk getting railed
Ordered these Monday and got here today lol waiting for test pipes and install hypeeeeeee
Great video, can I just say that z1 is one of the reasons I got a 370z, the ease of use from the website and the potential that I saw in the VQ engine really sold the deal for me. I love my PW Nismo and thanks for making great products guys! Love from Cali
Sooo, why cant you just do a test on a stock car? You pic a car with a $1500 exhaust, a lightweight flywheel!, and test pipes. What is the point?? I think most of use would like to see results with a stock car. Most of us don't have lightweight flywheels btw.
Just installed on my 370z! Excited for the first drive out tomorrow! One thing that I thought was a nice touch in the kit was the shorter bolts supplied to replace the factory near the radiator stay. The only thing I'd change would be some color instructions with a few more photos. Found myself just not using the instructions and going for it, until I found that there's ONE bolt that holds in the stock intake reducer snorkel thing (fought with it for a while, and then figured out finally that there's a bolt holding it in / stupid me). One other thing: Does Z1 sell a PCV delete kit to breathers? I felt bad putting that junk back on but luckily my TB's are pretty clean at this point.
Great video, just put a deposit on Z34, be bring by for advice! BTW I don't watch your videos for the music, so keep making great content!
You guys are Awesome!
Those earrings are throwing me all the way off
Class acts! Nice honest video! Still lovin the 2 piece rotors on my 370z! (they've lived through 18 months/15k of abuse so far!)
nice to see a new product but the maf sensor should never be on the bottom of the tube to mitigate water droplets while driving through heavy rain, should not be placed at the absolute top either due to condensation.
Hilarious guy, keep it up, Z1 ftw
Love the intakes I'm a happy Z1 customer. ..reppin south Florida. ..those motor mounts made a world of difference in my G37 sport...pop chargers next and uprev tune
Duo Maxwell what are some mods i can do to my 2012 g37 sedan?
@@j.vosier6786 first start off with test pipes and catback exhaust then longtube intakes and tune
I like these I think I get these in stead of stillen gen 3
Nice video 👍🏾
this looks awesome, how much when its on sale?
The fact you dont have to drill is slightly more intriguing than the Stillen honestly. But also I do think that having Test Pipes probably inflates the numbers a little more. I have an exhaust only so I assume it wouldnt be as big of numbers.
WTF is up with that goofy background music. It's not needed.
It’s much appreciated
@@MrModdedgear I just feel like people dont preview their uploads... 9/10 times i cant hear what people are saying over the music because the music is at like +9db and voices being at like -1db
great video showing dyno
This video is dope!!
Thank you sir!
Just purchased the g37 kit. I was just curious what tune was used in the testing. Looking into a few options.
I see on the website that weight reduction is listed in the description for these headers. Are there weight savings over the factory intakes?
How much of a difference is there over be nismo intakes ? On the HR
Man 06 Z need some love!!!
Correction you do mention the 06 Z intake.
What size of piping for the filter? And if ever i buy all of this from you guys cold air,intake and cbe would i get a good discount?
One question, for the upgrade in filter, can I use both of them right? You said just one, but I was curious if I could both of them in
Would this fit on a de ? Cold air intake ? Or would the cone hit the wheel when i turn all the way? Looks way bigger
do you guys sell the upgraded crash bar with the purchase of those intakes?
Since the m-spec high flow intake doesn't directly fit the G35, could I get it installed with you guys? I've been holding back on the purchase due to this issue.
I am really interested. What is the inside diameter on the metal tubes vs the silicon's?
Just have mine installed. Wow....what an intake 🙂 what an intake 🥰 what an intake 🤩😍👌 👏....really wake up the car.
It is a slightly louder in a good way, more responsive for sure, faster and I get better gas mileage as well.
Can't want to get my Z1 header from them.
They're very professional and their respond back time are quick.
Hey brotha I was wondering if you just installed and did a tune or just went without the tune and saw the same results?
@@vladshvets6556 trying to figure out if I’ll be fine with just intakes too without a tune lol
3:14 🔥🔥🔥🔥🔥🔥🔥🔥
What’s the inner diameter on these? I’m thinking of getting these with a 70mm throttle kit
After seeing the Stillen long tube install video and this one I can definitely say that I will be buying this instead.
what about the rain though?
mike schafer what about it??
@@noggodtv is it going to fuck the filters up? I want to get them but worried about that
Need a water shield, filters still got wet during a typical florida rain storm.
Where would you get one at?
@@jdmfl0w look up 22-2030PR on the k&n online store
Do you make this kit for a 2010 m35 with a hr motor i want more power what do u recommend?
Can you please list the mods recommended, found the video irritating due to background music.
Looking to improve my 370nismo.
What about air flow with bumper on ? And under shroud?
It would be fun to put a hr or vhr in my s12
I have a g37 sedan will I have to modify the crash bar for it to fit for the velocity stacks?
Do you have the dyno research on the 350Z HRs Sr???
does the jwp pop charger come with velocity stack?
I noticed that when you mention Will’s car, the caption states Greddy Evo 2 and you reference his car from the other video promoting the Greddy Evolution GT exhaust. Is this a typo? I’m interested in the Evolution GT so i just want to be sure which is used in the sound clip. Thanks!
Sorry, that is a typo. This car does have the new Greddy Evolution GT, not an Evo 2.
What about the 3.7 q50??
What is the diameter of the tubes? 3 inch all the way or?
@z1motorsports Just installed these on my 2007 G35-s Sedan, Curious if there is any risk of driving in heavy rain with these? I know the Stillen kit comes with a shield, but the Z1 does not.
Did you get any good gains with these?
What do you guys charge to do the exhaust, intake and tune, parts and labor on stock 370? 2014, Automatic, bone stock. Has sport option but don’t think that matters. I’m not worried about flywheel upgrade, that sounds really expensive. You’re west of atl right?
Jon, we are west of Atlanta just off of I20 in Carrollton. As far as parts and labor, it really depends because you have quite a lot of exhaust options, a few on tuning as well. I'd recommend giving us a call at (770) 838-7777 and get ahold of Jon, he's our in-house tuner and will be able to help you find what combination works best for your budget. For labor we'd have to get you over to our service department.
I just purchased the z1 cold air intakes for my 2013 g coupe but I have stock exhaust. How much hp would this add to my G it's the 498 price 1
Can't seem to find the upgraded crash bar on your site?
Do these have to be oiled or they dry filters
Should've did a test with kn filter vs the 2 velocity stacks
Hey bro , do the velocity stack filter ready works
Are you guys considering an optional 3 inch version of the z1 intake to compete with the gains of other companies?
Chris James wondering how the testing went on the custom 3 inch intakes they tested vs stillen g3 or z1...must not of been good power gains on 3 inch intake that was made or I’m sure we would of heard about it lol. Video on that would be sick. And I mean sick.
Can I drive in the rain with the filters mounted like that?
Anyone up here install this Z1 CAI on their 370Z or G37 Coupe sedan?
If yes, what brand hydroshield you use?
And any and problem when washing your car?
do you guys have a vid of these vs admin tuning im curious the difference between them
No but I do!!!!
Are they 2.5in piping or 3? Doesn’t specify on the page
So I'm new to this but on finish is saying wrinkle red. What's that,
are water shields available for those? or some kind of protection from rains or dusty roads?
Look up 22-2030PR on the k&n online store, there like 20-50 dollars
10/10 spencer react
:) agreed!
Will this fit the Infiniti ex37?
Are these better then stillen gen 3?
Love my z1 intake however I really wish you guys would consider making a shield for the air filters
Does rain ruin them
@@mikeschafer4440 I ended up finding some k&n pre filters that fit nicely over the z1 filters so I havent had any issues at all just watch out for deep puddles.
@@aaronlfx9199 Nice. But what about driving in the rain?
@@aaronlfx9199 not familiar with what K&N pre filters are, my bad. I plan on getting the Stillen gen 3 intakes so I'm curious
@@mikeschafer4440 there just like a water repellent sleeve that go over the filter
what degree elbow is the hose
Just put this on my G and I love it!
VQ Power how was the install and did you tune afterwards?
Duo Maxwell installation took me 2 1/2 hours but that’s because I took my time. You can hear and few a difference right away around 5k. Still haven’t gotten a tune and still works great.
VQ Power thanks for helping me make up my mind..it just makes sense to go cold air in Florida. ...
VQ Power did you have to get the support ground or it fits without grinding the bumper support like the Z?
Duo Maxwell nope I just used the kit they sent me and everything fit just fine
@Z1Motorsports ,Just have one question, is water still an issue when it rains? Placement behind the grill is not a concern at all for the g37s sedan? I can see it may not be an issue for the closed face Z.
I'm not 100 percent sure but better be safe than sorry, I suggest looking up 22-2030PR on the k&n online store
@@-meat- i purchased front mounted intakes not long after this, and haven't had any issues over the last 2 years
@@CitiZen1.0.1 ok thats good, I had a feeling that you already did, considering that this was two years ago, but I just wanted to make sure
20+ gain off a intake????? 😯 that’s crazyyy
Do you guys have anything for water protection, my car recently hydro locked
Look up 22-2030PR on the k&n online store
Are those final numbers without tuning?
Could you add subtitles please? I find it difficult to understand what he is saying.
Thank you.
Does the check engine light show?
sooo... if i want to clean the filters, i have to take the bumper off everytime? sorry, i dont consider removing the bumper an easy install.
Yes, if you want to clean the filters you will need to remove the fascia, just like with any other cold air intake. This is a simple task and only requires the removal of the front undershroud bolts, and a few bolts accessed through the fender liners. We've done this laying on the floor in our dyno bay and is very simple.
A tune only made a 10whp difference with test pipes and intake and exhaust, how?
Do the upgraded filters fit fine with the factory crash bars??
How can you watch something and completely miss multiple times he mentions that?
doesnt come with a splash shield like the STILLEN one ??
I dont think so, but you can get one for 24 bucks on the k&n online store, the part number is 22-2030PR
Great video.. Will they fit 2014 Q50 3.7 and if they do how can I get my hands on them? I email your company and they said not sure??? In the video you mentioned that it would fit the Q50 so just curious..because I would like to purchase them.
They will NOT fit '14-'15 Q50, they will however fit the '14-'15 Q60.
Z1Motorsports any chance of accommodating the Q50 soon?
Do these help mpg or nah ?
Devin here - It would be interesting to see similar tests with the DE. The m-spec intake comes with a K&N filter with no integrated velocity stack. The Z1 intakes for HR come with integrated v-stacks, so it seems the DE would benefit more from a v-stack than the VHR in this video. I installed the v-stack on my DE with the m-spec race intake, and noticed decent gains on the butt dyno - can't wait to get it retuned, and see what it puts down.
So this works for the DE ? Single throttle body
@@LuisGonzalez-vx1oo I would say it did. I have the Z1 race intake and had to modify the crash bar for clearance. There are a couple other intakes that include v-stacks though for the DE, like the PopCharger or Z1 short tube intake. I can't really mention any specific numbers since my last retune a couple years back was for several changes.
@@jellofuel i have a cold air intake , if i buy the adapter with the stacker would it work ? And just connect it to the tip
@@LuisGonzalez-vx1oo Yes that will work, I just double checked my intake to be sure lol
@@jellofuel thanks !! I haven't seen many DE with this feature. It's mostly HR & i was wondering if it would work
What octane were you using on the tuning runs? 93?
We always test and tune on 93.
Hey guys..I want to increase Horsepower In my 350z 2008. i have 3k only. Please suggest the things i can do with this amount. What shud i add in engine? Plz help if u have a strong background in this area
Can this fit on a Q50 3.7?
These provide more gains than the admin intakes and the mike Upton 3” ones?
We have seen nearly identical gains between 3'' intakes and the Z1 High Flow intake.
New to the 370z game. I have a 2017 370z Nismo. Do I need to cut the bumper to fit this mod on my car and do I need to take my bumper off to clean the filter?
Hey Edward, the crash bar will need to be modified for the larger filters, but the bumper cover itself will not need to be cut. You will need to remove the bumper cover to clean the filters, but because they're tucked up under the fascia they're in clean air and don't get dirty too quickly.
So you can install them with no tune ?
THAT FUCKIN MUSIC EVERYONE USES....
I thought we finished that era of RUclips back in '08-'10
RUclips's anthem music
Would be easier to change maf from topside...
How often must one clean the filters?
Question, I just installed the z1 intakes on my g37 coupe.. and it rain bad here in Texas Should I be concerned because I saw the intakes pretty wet
Have you found a solution?
@ no, they answered a couple, also it doesn't "ruin" your engine that bad but it might stall so better be safe than sorry and get a water shield, Look up 22-2030PR on the k&n online store
So the 350Z HR and 370Z use the same CAI?
May do an install video and definitely an in car video spankin a$$
Why not make a 3.5 inch with the velocity stack
So is the z they worked with have basically stock power?
Wheel and crank hp is different. This is making about the numbers advertised at the crank, at the wheels.