With the amount of effort used to do a fake patina paint job you could make something that actually looks nice. Instead of faking the rust bucket look.
Great job fellas! Loved watching your work and you two really know your stuff. Thank you for the video and bringing us along for the ride! Enjoy your “new” truck!
Wow! Great job fellows! You two really know your stuff and it was a pleasure to watch you work. Thank you for the entertainment! Enjoy your “new” ride!
There is cryo tech available for cleaning the underside of the truck. Pretty common nowadays and makes it look almost brand new. Been available for quite sometime through detail shops.
I had a 70s pick up back in 1991,. got it to make a play toy, but got divorced a few years later and had to get rid of it. Why do we always have to lose our trucks when we lose our woman
I never do repairs on a c10 floor Just replace the complete floor I can make the doors fit better and get that perfect sound when they close C10 doors never fit and close well from the factory In the end a new floor makes a perfect cab worth allot more money!!! Coupled with new rockers and cab corners…bed line the bottom with matching color to the truck and smooth the fire wall set it up for vintage air
I'm doing an LT4/10L90E in my 70 C10. Kinda wish you did LT4 instead of LT1. You had to do the low side fuel system anyways, so why stop in Chicago when you're going to new York?
I'm not opne for patina paint jobs or the look . I rather have a sharp paint job that makes the vehicle stand out . But like anything its your choice of how you want your vehicle to look . High quantity paint job as you call it Well i think not because here in Pennsylvania it's a cheap paint job .
ID DALY DRIVE THE SHH 🤫 OUT THAT DAM THING LOVE IT!!! I USED TO HAVE A 69 GMC MY DAD HAD A 72 RED JUST LIKE THIS ONE BOTH HAD LONG BEDS THO...THIS TRUCK HERE WOULD BE SOOOO FUN TO RUN AROUND IN SUMMER TIME!!!
indeed you are right, these are older powernation episodes, he has a youtube channel and is currently working on a 4wd drag race truck with about 1500-1700 hp
in australia we dont get chevs we get holdens they are chevs with holden styling same chev engines i would love to send you the specs so you can buy me some brothers parts for it and a cool crete motor do you guys have any 6wd cars over there maybe you could build one for us to see thanks for the cool video
Horse Power needs to build a engine for something besides just a vehicle. Lets say a boat a jet or a air or a inboard. May be a pulling tractor or other equipment. Say I want to hop up my forklift.
It’s funny to listen to the vvt jargon they are spitting about GM’s worst nightmare. The vvt and active fuel management has since became the worst thing they ever came up with.
The law that restricts Xfelons from possessing a firearm was created in 1968, in response to the event that accured shortly before in Chicago, where the Chicago State Supreme Court was completely surrounded by the then Black Panthers armed with constitutional protected firearms. There for, it was not only an unconstitutional ruling but also Racist ruling. The analogy proposed by the state that back in history criminals would never be charged with duch offense because they would be executed for other crimes. This is nothing more than speculation snd congiture but for a traverse challenge, Our forefathers that drafted the constitution were at the moment of sign the declaration of independence became criminals. Their crime, 'Treason against the Crown.' punishable by death. This means they were criminals while they wrote the second amendment. Where-by, any law the places any restrictions is in violation. Prriod.
Y'all sure screwed up a nice pickup! You had an awesome paint job, screwed it up with some scratches, screwed up the suspension with some ballons! Gimme a break!
There is no replacement for displacement! Should've went with a big block! A fuel injected 572 wouldve been perfect with a 6 speed manual. Direct injection just mean fouled valves down the road. AFM is crap! Slammed truck... Hard pass! Can't do truck things. Just for hitting on high school girls...
Why not make false patina interior too? Take a knife and a grinder to the seat make it look junk too. To me it's sad to see how you ruin a rare pickup like that. You know there is modern crap trucks that have all that garbage from factory like ls and led and every other undesirable part you ruined this truck with.
General Motors AFM fuel management sucks. Instead of having thoseazy freaking two-stage lifters that really pieces of crap. why not just shut off the fuel and spark to the cylinders that you don’t want to run and save the economy that way. The complexity of the mechanical two stage lifters when a few key strikes would just shut off the fuel and save gas. GM’s last attempt at this type of active fuel management has never worked right. The DFM sucked and remember the 1981 Cadillac. The famed V8-6-4 engine. One year only and it was a piece of crap.
Little kid syndrome!!!Hits different when its put on front street that way.40 years and they call your number on some _uck shit!Wow let the truth shine through…Shocking and disgusting!! Feel for his familia.
this video is making me want a c10 really bad now
With no seatbelt
I'm not a big fan of fauxtina, but I don't hate a well done fauxtina job as much as I hate is when someone sprays gloss over real patina.
😮😮😮😂😮😂😂😅😢😮😮😂😂😂😮😂😊😊😊
😅😅😮😮😮😂😂😊😅😮😮🎉🎉😮😮😂😂😮😂😮😮😂😊😊😮😮😮😮😂😂😂😅😢😅😢😅😅😂😮😮😮😊😊😂😮😮😂😊😮😂😮😂😊😅😢😮😮😊😂😅😢😮😮😂😂😮😮😊😮😮😂😂😂😂😂😂😮😢😅😮😮😢😅😢😅😢😢😅😅😢😅😢😅😢😮😅😢😅😅
The 😊
With the amount of effort used to do a fake patina paint job you could make something that actually looks nice. Instead of faking the rust bucket look.
What about satin clear?
Great job fellas! Loved watching your work and you two really know your stuff. Thank you for the video and bringing us along for the ride! Enjoy your “new” truck!
Wow! Great job fellows! You two really know your stuff and it was a pleasure to watch you work. Thank you for the entertainment! Enjoy your “new” ride!
This show brings back wonderful memories
So, you destroy a perfect restoration with overspray and blotches. Give me strength !!!
Oh how I miss mine, I had a 67, 68 and a 71. But I miss my 68 the most because it was my Grandpa's
I got my dad's 70. I will never get rid of it. Had it since 1997 and am restoring it now.
Absolutely love everything about this build. Also good to see Kevin Tetz approve the build. BTW nice casting couch @1:32.17.
Airbags suck, and "patina" is hideous. That's why Copperhead is still the #1 67-72 build.
Makes me want to have a truck. Just wish my garage was wide enough to fit two large cars. Nice work you two!
I could watch this on a loop! 🔥
tht is a pretty good looking truck with new suspension and air ride
Wow nothing like an unlimited build budget , way to tear up a perfectly good truck
Thoughts and prayers for that stock 12 bolt C-clip rear end
There is cryo tech available for cleaning the underside of the truck. Pretty common nowadays and makes it look almost brand new. Been available for quite sometime through detail shops.
Love this show
I can totally hear the song Stranglehold by Ted Nugent in my head while I was watching this...great build!
Why would you put a DOD/AFM in a hot rod?
Nice truck 💪👊👍💯
I had a 70s pick up back in 1991,. got it to make a play toy, but got divorced a few years later and had to get rid of it. Why do we always have to lose our trucks when we lose our woman
Thst C10 was incredibly nice before they start on it. I like the LT1 though. Nice.
These guys are amazing!!
gr8 build video... gives the average man hope to attempt this... can you do a cost breakdown for the parts added
C30.❤❤❤❤❤❤.
Gotta love the subtle patina on this one
You guys are awesome 👌
Seeing a patina after all that work is heart breaking.
Especially on a slammed down truck.
It's crazy like hurting a beautiful woman; it's just wrong.
Wow them burgers look awsome
Look at all that hair LT has😂, and I love the project, but I'd is NO ulgy truck#8./1496FTW , that 535 is gonna be S-I-CK!¡!¡!¡!¡
I never do repairs on a c10 floor
Just replace the complete floor
I can make the doors fit better and get that perfect sound when they close
C10 doors never fit and close well from the factory
In the end a new floor makes a perfect cab worth allot more money!!!
Coupled with new rockers and cab corners…bed line the bottom with matching color to the truck and smooth the fire wall set it up for vintage air
I knew something was fucked up under that bed liner as soon as i saw the truck pull into the shop lol
Painted frame, new, shiny grille and bumpers and patina??!!
KAMALA FOR THE GALLOWS!
Let’s ask GM how that afm is working out for them lmao
Really like that patinalook
1971 Chevrolet C10
19:32 Stay Tune for More Truck Tech
always screwing up the builds with crap "patina" paint. what a shame
Patina is an old English word for cheap and lazy.
@@bmstylee I thought it was spanish for ,too poor to paint it
Love the show though
Amazing
Love it . Where is the truck now ?
Only one problem, no A/C, ,, other than that, Awesome job 😏
leave the paint ….. if it’s natural patina then that’s fine! Otherwise leave it alone. Faux patina is hideous!
I say leave the original engine and transmission . For the 400 ho you will gain from the LS it's definitely over rated
I'm doing an LT4/10L90E in my 70 C10. Kinda wish you did LT4 instead of LT1. You had to do the low side fuel system anyways, so why stop in Chicago when you're going to new York?
Showed nothing on interior and where are the front wheel wells? Excellent build though.
I would have done a 4 link in the rear with coil overs on all 4 corners
How much does the horsepower change on an automatic vs manual
Really COOL C10 just needs WIDER wheels and tires on the rear! PEACE ✌️
I'm not opne for patina paint jobs or the look .
I rather have a sharp paint job that makes the vehicle stand out .
But like anything its your choice of how you want your vehicle to look .
High quantity paint job as you call it
Well i think not because here in Pennsylvania it's a cheap paint job .
ID DALY DRIVE THE SHH 🤫 OUT THAT DAM THING LOVE IT!!! I USED TO HAVE A 69 GMC MY DAD HAD A 72 RED JUST LIKE THIS ONE BOTH HAD LONG BEDS THO...THIS TRUCK HERE WOULD BE SOOOO FUN TO RUN AROUND IN SUMMER TIME!!!
only thing I don't like is fake patina. should paint it satin black or just high gloss black
2years and the Frame ist covered in Rost.
Hasn't LT been off this show for a few years now?
Yes and he has his own RUclips channel. You should check it out. Doing some cool stuff in his own shop
indeed you are right, these are older powernation episodes, he has a youtube channel and is currently working on a 4wd drag race truck with about 1500-1700 hp
LT!!!
👍👍👍👍👍👍👍
As parts wear, how accurate is the Dino testing?
in australia we dont get chevs we get holdens they are chevs with holden styling same chev engines i would love to send you the specs so you can buy me some brothers parts for it and a cool crete motor do you guys have any 6wd cars over there maybe you could build one for us to see thanks for the cool video
Should have put the letter sout in tired old school look
Horse Power needs to build a engine for something besides just a vehicle. Lets say a boat a jet or a air or a inboard. May be a pulling tractor or other equipment. Say I want to hop up my forklift.
If you sell this awesome truck how much would it be?
That Chevy need a proper paint job solid red for instance
Paint looks done no more than 3 years prior. The red looked good and I don't even like red.
That grill ruins the whole truck for me personally.
What size is your shop?
Should have deleted that afm crap on that engine
Paint is horrible.Just paint the truck and leave the patina to nature.
20” wheels are horrible, as well.
18” max….
What wheel hub is that?
It’s funny to listen to the vvt jargon they are spitting about GM’s worst nightmare. The vvt and active fuel management has since became the worst thing they ever came up with.
Still never understood why they made the exhaust that way ...should have just dumped it ..but to each there own
Does anyone know what LT is doing these days?
Aww yes, so very affordable! Somehow I don't think that these shows are geared towards 50 year old dads that barely make the ends meet
Wonder what the cost of this was. Anybody have a clue? I wish they would give the final price including labor.
31.22 Chinese pop
Spent a lot of time and money to make the paint look like shite.
😂 this looks familiar mines a stepside
What’s the width on the wheels ?
That couch was not it
I got a 72 for sale, factory.
WHAT???? I HATE the paintjob. SO not "eye catching".........I don't get it man. Just looks like a shitty old truck. NOPE.
the kids who were “dumb”
Um i think the llt1vwas the last small block chevy
Everyone's mispronouncing "Height" by saying: "Hīthe".😂
It's a Midwest thing. Lol
We also use the word "at" a lot at the end of our questions. Like, "Where's my 10mm at?" Instead of, "Where's my 10 mm?"
Doesnt look patina to me at all. Kinda let down on that one
The law that restricts Xfelons from possessing a firearm was created in 1968, in response to the event that accured shortly before in Chicago, where the Chicago State Supreme Court was completely surrounded by the then Black Panthers armed with constitutional protected firearms. There for, it was not only an unconstitutional ruling but also Racist ruling. The analogy proposed by the state that back in history criminals would never be charged with duch offense because they would be executed for other crimes. This is nothing more than speculation snd congiture but for a traverse challenge, Our forefathers that drafted the constitution were at the moment of sign the declaration of independence became criminals. Their crime, 'Treason against the Crown.' punishable by death. This means they were criminals while they wrote the second amendment. Where-by, any law the places any restrictions is in violation. Prriod.
Can that old frame handle the power of the new engine?
Y'all sure screwed up a nice pickup! You had an awesome paint job, screwed it up with some scratches, screwed up the suspension with some ballons! Gimme a break!
There is no replacement for displacement! Should've went with a big block! A fuel injected 572 wouldve been perfect with a 6 speed manual. Direct injection just mean fouled valves down the road. AFM is crap!
Slammed truck... Hard pass! Can't do truck things. Just for hitting on high school girls...
motor date
no lock washers, not good
okay seriously big question ... the chrome rims....not for me would rather see something updated, sick of chrome SOC
Why not make false patina interior too?
Take a knife and a grinder to the seat make it look junk too.
To me it's sad to see how you ruin a rare pickup like that.
You know there is modern crap trucks that have all that garbage from factory like ls and led and every other undesirable part you ruined this truck with.
I love everything about that Truck…except the paint job…ugh…
General Motors AFM fuel management sucks. Instead of having thoseazy freaking two-stage lifters that really pieces of crap. why not just shut off the fuel and spark to the cylinders that you don’t want to run and save the economy that way.
The complexity of the mechanical two stage lifters when a few key strikes would just shut off the fuel and save gas.
GM’s last attempt at this type of active fuel management has never worked right.
The DFM sucked and remember the 1981 Cadillac. The famed V8-6-4 engine. One year only and it was a piece of crap.
I cant believe they butchered a hole thru the be f9r the exhaust. Worst hack idea I've ever seen.
Little kid syndrome!!!Hits different when its put on front street that way.40 years and they call your number on some _uck shit!Wow let the truth shine through…Shocking and disgusting!! Feel for his familia.
Do you even english bruh?
@@____MC____ learn how to write dummy
and that’s nothing special only 460 horse from 6.2 L? Ford gets 485.0 L!!
Fords suck and will never look this good
why not get a junk truck and build that one
What year was this episode aired?