I wish I knew how to do all this.!!! I paid a shop 14k. To have mine painted... and I broke it all down and put everything back together after she was all painted....
@@MazdaMitch thanks Mitch. Is this wire part of one of the 3 plugs or do I run this wire up from your coil to a connection on the cluster? Guessing all harnesses have tach wire incorporated into all including non tach model clusters...right? Any chance you'd have access to a condenser ...none available ? 89 2200 5spd. 400k new engine .. webber header n 109 today no ac...whew!! Thanks again.
@@williamvictory2009 On the condenser, I tried 3x with RockAuto and they kept shipping one that doesnt fit our trucks I told them, but they dont care. Find one on eBay, or Junkyard and clean it inside and out. On the tach. the trucks are wired to accept a cluster with tach, its all wired already. For years I ran an external suntach or sundial brand tach mounted to the dash and ran a wire to the coil area and connected it Cant recall which one, but without doing all that a tach cluster will work as soon as its installed and plugged up. If it doesnt. It may be the cluster.
@@MazdaMitch gotcha...appreciate you! Condolences re; your dad's passing.. Time is all that helps. Mom passed at 100 in 2016. Still think of her devotion everyday and miss her so very much...yep was all in mama's boy. Stay engaged Stay safe! You give us all hopes for a better B. God bless my friend
The hood had two paint jobs on it, had to be ground down to metal and had a few dents. Laid gold filler on, sanded, repeat several times, then glazed and sanded a few times for pinholes, the filler primer and sanded. Then primed and paint. 90 % of everything put on gets sanded off.
Finally someone on RUclips that actually cross hatches and you are sanding with atleast 12 inch blocks that bih gonna be straight
I wish I knew how to do all this.!!! I paid a shop 14k. To have mine painted... and I broke it all down and put everything back together after she was all painted....
14k damn they took you for a ride sorry
Its the hourly labor costs that gets ya.
Mitch what makes tac work doing cluster swap...don't get it.
Appreciate it.q
There is a wire on the coil that makes it work. It's yellow or blue, usually hooked up by default. The cluster swap is plug n play.
@@MazdaMitch thanks Mitch.
Is this wire part of one of the 3 plugs or do I run this wire up from your coil to a connection on the cluster?
Guessing all harnesses have tach wire incorporated into all including non tach model clusters...right?
Any chance you'd have access to a condenser ...none available ?
89 2200 5spd.
400k new engine .. webber header n 109 today no ac...whew!!
Thanks again.
@@williamvictory2009 On the condenser, I tried 3x with RockAuto and they kept shipping one that doesnt fit our trucks I told them, but they dont care. Find one on eBay, or Junkyard and clean it inside and out. On the tach. the trucks are wired to accept a cluster with tach, its all wired already. For years I ran an external suntach or sundial brand tach mounted to the dash and ran a wire to the coil area and connected it Cant recall which one, but without doing all that a tach cluster will work as soon as its installed and plugged up. If it doesnt. It may be the cluster.
@@MazdaMitch gotcha...appreciate you! Condolences re; your dad's passing..
Time is all that helps.
Mom passed at 100 in 2016.
Still think of her devotion everyday and miss her so very much...yep was all in mama's boy.
Stay engaged Stay safe!
You give us all hopes for a better B.
God bless my friend
Just curious why you covered the entire hood. Isn’t that product only to fill low spots?
The hood had two paint jobs on it, had to be ground down to metal and had a few dents. Laid gold filler on, sanded, repeat several times, then glazed and sanded a few times for pinholes, the filler primer and sanded. Then primed and paint. 90 % of everything put on gets sanded off.