Thanks for compliment. It's half wave rectifier for battery charging. Which is considered enough for such a small low power battery and low power usage like horn and indications.
If LiFeP04 batteries must be charged less than 14.48 volts, how do I modify the motorcycle regular to match. Would have been better explained if you drew a schematic of the regulator and explained how it regulated the charging voltage.
You said there are two regulators inside RR unit, one is series and other is shunt. Red wire gives regulated DC say not more than 14V DC, which can be connected to Battery. How to take output to Head Light, Tail Light, which should not exceed 14V DC ?
regulator rectifier is specific for specific battery ampere. i mean this regulator (shown in video ) is for charging eg. 5ah battery so for 9ah battery the regulator is different ?? i mean regulator is depends upon battery ah? if i want to charge 9 ah battery so i need rr which is like bike of pulsar 220 or ktm 390 (they are 9ah battery ). battery charging ampere is bigger if we use big bike RR unit ?? or all are same output ampere
hae brother,,,,,thank you for your teachings,,,,,I have aproblem with my motorcycle it's destroying battery each time ,,kindly help me rectify the problem.
Dear Sir, The headlight of my motorcycle is not bright enough. Will it be ok if I change it to Number 3 (To motocycle electric system) so that it gets power from the battery?
this is supposedly half bridge which i dont get, they imply half coil is used for charging, your case would be single coil for charging than you can use battery for lights, dont take my word and check your stator, either one side of coil is grounded or you have two wires connected to coil ,same thing i think, aslo this is not regulator, i dont think, check out bigclievs video, its same circuit, full bridge rectifier is used for lights not for battery and batttery only gets half vawe from single diod, this is my understanding and i think this video is not right,
wait what, *series regulaor* is triac which is not even in battery circuit, battery only has single diode, even on pcb you can see 2 terminals of connector are only to dioede. , iwhat am i missing?
Pulsar old model single plug bike main 6tar ka magnet coil laga hua hai or 7tar ka coil laga diya par bike main current nahi hai .. current lane Kay karna padega... Please 🙏🙏 ak video bana dijiye
i have old Kawasaki ct which come with 2.5 ah battery but i want 9ah battery so i need change my RR and replace with ktm 390 or any bike RR which have 9 ah battery or sagest me any 4 pin 5 pin RR which can charge my 9ah battery
Dear Sir I have problem in my lumina ls v6 2006 I have problem my redio working 1 year old but not working now I'm change fuse but not working dear Sir pls pls help and 1 video for me dear Sir pls pls help
Excellent video. Great explanation. Thank you very much.
Excellent as always sir! Clear, detailed, and concise
thank you! I have burned a lot of lights, hope to fix it now with this help!
(4.58) I think you making a mistake about pin no 1... Just a mistake.. Very nice explained.. Thanks a lot 🙏
Zabardast talented bhai
Bohot khoob
This will be really helpful.
Thank you!
Greetings,
Jeff
this is really helping me, I like it
Excellent presentation.
Great video. Do you need to bother to put a fuse on a ground wire? Is it an extra safety precaution?
Good luck sir 🎉
Thanks.
Good teacher have understood
nice video bro!! but a question..... does the green also need to bee splitted to minus battary and minus on blank frame ?
Thank"s for education brother
Well explainded material
Great stuff, now tell me why do the regulators blow and how do I get the resin off?
Nice video❤❤❤ it will work as half wave rectifier or full wave rectifier?
Thanks for compliment. It's half wave rectifier for battery charging. Which is considered enough for such a small low power battery and low power usage like horn and indications.
Sir, could you please make video on single phase full wave rectifier RR unit used in bikes?
If LiFeP04 batteries must be charged less than 14.48 volts, how do I modify the motorcycle regular to match. Would have been better explained if you drew a schematic of the regulator and explained how it regulated the charging voltage.
This is mostly for all brands the circuit you showed??
Jzk bhai
My bike has a problem on the head lamp. Bulbs being blown off each time I fix in. What could be the problem
It seems bad regulator rectifier unit
You cant touch bulb(glass part of it) with your hands! Otherwise it will blow up. It must be clean
Soo much Thanks to you sir
Thanks for the best educational video its really helpful
You said there are two regulators inside RR unit, one is series and other is shunt. Red wire gives regulated DC say not more than 14V DC, which can be connected to Battery. How to take output to Head Light, Tail Light, which should not exceed 14V DC ?
That is shunt regulator who regulates power to head and tail lights.
Sir, what about the 3rd pin? What is it used for? Also, please show us how to check if RR unit is good or bad.
cool video
regulator rectifier is specific for specific battery ampere. i mean this regulator (shown in video ) is for charging eg. 5ah battery so for 9ah battery the regulator is different ?? i mean regulator is depends upon battery ah? if i want to charge 9 ah battery so i need rr which is like bike of pulsar 220 or ktm 390 (they are 9ah battery ). battery charging ampere is bigger if we use big bike RR unit ?? or all are same output ampere
Just replace the battery with your required AH and keep the rest the same as old. It will work just fine.
How many volts AC you have on red one in exit from stator ?
12 to 14
@@JahanZeb1976 i have 180v why ???
mujhe ye ghr me bnana he kya ap iske component ki values bta skte he ?......special voltage regulator ki
hae brother,,,,,thank you for your teachings,,,,,I have aproblem with my motorcycle it's destroying battery each time ,,kindly help me rectify the problem.
After how long?
Dear Sir,
The headlight of my motorcycle is not bright enough. Will it be ok if I change it to Number 3 (To motocycle electric system) so that it gets power from the battery?
If there is no yellow wire only white wire is available in the coil plate then what kind of regulator will be installed
this is supposedly half bridge which i dont get, they imply half coil is used for charging, your case would be single coil for charging than you can use battery for lights, dont take my word and check your stator, either one side of coil is grounded or you have two wires connected to coil ,same thing i think, aslo this is not regulator, i dont think, check out bigclievs video, its same circuit, full bridge rectifier is used for lights not for battery and batttery only gets half vawe from single diod, this is my understanding and i think this video is not right,
wait what, *series regulaor* is triac which is not even in battery circuit, battery only has single diode, even on pcb you can see 2 terminals of connector are only to dioede. , iwhat am i missing?
Pulsar old model single plug bike main 6tar ka magnet coil laga hua hai or 7tar ka coil laga diya par bike main current nahi hai .. current lane Kay karna padega... Please 🙏🙏 ak video bana dijiye
hello, can you tell me why the motorcycle at idle puts 13.6 v and when I accelerate it has a random voltage from 8 v to 14?
Defective rectifier regulator could be the reason
Sir, Yellow is +ve or -ve charge?
i have old Kawasaki ct which come with 2.5 ah battery but i want 9ah battery so i need change my RR and replace with ktm 390 or any bike RR which have 9 ah battery or sagest me any 4 pin 5 pin RR which can charge my 9ah battery
रेगुलेटर कैसे बनाए ? tvs scooty है
hey man I have a bike tried change coil but can't produce spark
SIR, i am still waiting for the explanation video of wall clock circuit, and how to check whether it is good or bad.
I'm out of station now a days. Let me come and see. Regards,
Super super super
sir how many volt it given
0 to 30v. Depends upon engine speed.
What about when the motorcycle battery doesn't charge wat would be the problem
Wiring, alternator coil, regulator rectifier or battery itself.
Dear Sir I have problem in my lumina ls v6 2006 I have problem my redio working 1 year old but not working now I'm change fuse but not working dear Sir pls pls help and 1 video for me dear Sir pls pls help
u say light is not regulated? how is it connected directly to the lights it would be sending 40+ volts!
Lights power is regulated too. Watch again.
Sir ji Blower Balancing ka kam Do
We do ourself.
Please how to wrap the file
Which file do ypu wana wrap?
@@JahanZeb1976 The method of winding the files themselves
Hindi Hindi
Search The Engineer cdi. On RUclips search.
Bhai english nahi aati to kyu itni takat lga rhe ho😂😂
You seems to be bloody paki.
ہمارے ہاں جب کسی کو جاہل کہا جاتا ہے تو ساتھ ہی جٹ بھی کہا جاتا ہے۔ یعنی جٹ جاہل۔ اور یہ بری گالی تصور کی جاتی ہے۔
Bahi urdu me bol le
Watch another video for Urdu. I have another channel for people like you. Search on RUclips The Engineer CDI
this is really helping me, I like it