Heater Blowing Cold Air - Quick Fix
HTML-код
- Опубликовано: 14 июн 2022
- My name is Nathan and I am living full-time in my RV. Patches is a 1989 Winnebago Superchief on a 1988 Chevy P30 Chassis with a 7.4l BBC 454.
Follow me around as I live a nomad lifestyle being off the grid, boondocking, traveling and work on the RV making repairs and completing upgrade projects!
**If you like the video please Thumbs Up & share. Thanks for watching!!! :)
-----------------------------------------------------------------------------------------------------------------------
Help Class A with traveling & repairs:
Paypal- bit.ly/2MeP5zp
GSG- bit.ly/3FALQyJ
Stickers - coming soon!
.
RV Gaming - bit.ly/32gkgmn
.
Join this channel to get access to perks:
/ @classaliving
"quick"....brother this video is twenty three minutes long
Lol same thing I thought lol
I've never been so peeved off
One of my favorite videos I fixed a couple of my little heaters inspired by your video
I can't believe he actually died in a housefire after making a video about messing with fan heaters. The news report said that the fire was started by an electric blanket though. Thank you for your great videos. RIP
Rip :c
Your source must be Fox News. LOL
Lesson I learned was to just buy a new heater.
RIP
Joh😢
Nice repair!
Great Job!!
Good job
You make something that seems so complicated seem so simple. Great to know how to save money not replacing a heater for something like this!
Nice bit of recycling. Cheers dude
For my use case which is usually heating a room, I wouldn't bother with a low and high switch. If you aren't tripping the circuit breaker, running the heater on high is more efficient than low because it heats the room up faster and put less overall stress on the heater over the long run with the thermostat is used in a generally sized bedroom. I you're heating a master bedroom or a living room, you should look into 240 volt heaters at that point. Running a heater on low is useful if you are tripping a circuit breaker or you have the heater blowing on you like on a desk. Having a separate switch that controls one of the heating elements is useful if you could only find 10 amp switches since there would only be around 7 amps passing through a switch. With all the power going through one switch, you would need a 15 amp switch for sure. I'd check the power draw on each setting before doing that just to be safe since each heating element might not be pulling the same amount of current.
Great fix and vid. But I wonder. The thermostat bi-metal contact 'switches', are the contacts clean...? The arc over time you see. If not, the thermo metal 'switch' leg(s) is / are out a shape / 'tired'! It asks for lot of try and error patience, but they can be bent in shape so it works again as intended. And if not, get yourself another thermostat asap pls. Till then stay with it and awake while using this heater 🤞
My cadet electric wall heater was working just fine. All out of the blue it just started blowing cold air. The fan blows. Tested thermostat and works. Kicks in when i set it at warmer temp but just blows cold. I hit reset button, didn’t work, i reset the circuit breaker, no change. Is there a way to fix it or do i have to go buy a new one?
What is called that botom of fan ? Bcz 1 wire i have connected 1 is not now i connect bouth but i see no fan rotating at all
Quick fix. Shoot it with a shot gun and go buy a new one. Follow me for new tips.
Is it safe that the bottom of my heater fan is hot to the touch ?
Heater? It's going to be almost 100 deg today. Lol
Is this a old video in the winter?
Why are you watching videos on heaters Darrell
Fan heater turned into regular ventilator box fan
That's the way to do it!
Danny and Lynn
All that crossover might start a fire
I have a similar heater but mine starts off by blowing hot air then after a minute or two it starts blowing cool air, what could be the issue?
Thanks in advance.
So in my case it was a faulty thermostat, I had to leave the dial at a certain position for it to work.
make sure those are rated for 15A
i have a jacket but i have one and it stopped heating ¿
edit: it works today
Must be a UL certification
Buying another heater it was only,30$ i know I'd make a safety hazard
Hi! New duble switch is perfect, 100% but Heather Chinise garbage them all. 2x 1m2 cable, and oweheating and hot safety 105C work or not.
I have 4 Heather Blowing 1dai, fire and end of life. , or 3 only work 1000w, 2000w owerheating switch off and 1000W. and again and again.
The wire 1cm2 not 1.5cm2 not safty. overheat and overheat and bimetal off. :)))))))) Cut 105C safy, cut bimental , direkt wire 1000W x2 = 2000W
my room temperature 7C and Heater fire 7 Celsius temperature. Joke. Garbage the chipest Chinis Heater Blowing.
But I have 26Yers old not Cihinise Heatar ist wor but switc power 1 1000W and Power 2 max 1000W but not work switch correct. Power 1 or Power 2 no 1+2.
I replace better swich. Yu are perfect metal switch. My english bad sorry.