How To Use Huepar Laser Level Outdoors?

Today we will show you a comprehensive guide on how to use Huepar laser level with a laser receiver outdoors.We will use S04CG laser level and LR-5RG line laser receiver as an example.
Press the ON/OFF button to turn on the laser level and make sure it is fully charged.Then change the laser tool to the pulse mode,short press the ON/OFF button to switch/return to the pulse mode. The PV of the screen will be on and off.
When switched to the pulse mode or returned to normal mode, the laser beam ( s ) will blink fast as a reminder.
Press the ON/OFF button to turn the laser receiver on.Then press the rightmost Light Switch button to turn on LCD illumination.Then take the receiver to where you want to measure.The distance is at least 17ft (5m) away from the laser level.There should be no obstacles blocking the laser during use, including the user.
For detecting the laser beam,you should use the bubble vial to maintain the a level plane with the receiver first. The receiver must be used in a level condition
Secondly,loosen the adjusting knob to move the receiver up and down when using a measuring rod.Tighten the clamp until the center indicator lights up, it means that the laser line matches the center mark.
If not,please move the it slightly according to the arrow prompts.When the down arrow lights up on the screen, move it down until the center indicator lights up.
An audible sound also helps you locate the laser beam. Turn the volume button ON, Three conditions correspond to three different sounds.
A slow beep sounds → Move down
A steady beep sounds → Laser beam is aligned
A fast beep sounds → Move up
If there is anything else you want to know, please leave a comment.
#huepar #laserlevel #outdoors #receiver