Это видео недоступно.
Сожалеем об этом.
DIY STONE VENEER FIREPLACE INSTALLATION… YES, YOU CAN DO IT YOURSELF! - PART 1
HTML-код
- Опубликовано: 25 сен 2019
- DIY stone veneer fireplace installation, presented by stoneselex.com. Watch how USTONE Adhesive makes quick work of installing stone veneer on your fireplace installation project. You’ll get tips on how to begin your stone veneer fireplace installation. Planning is the key to any successful project and USTONE instant grab adhesive will speed up the installation process. With no messy mixing to do, your clean up will be a breeze. Just load up your caulking gun with USTONE stone veneer instant grab adhesive and install your decorative stone veneer. Always protect the area around your fireplace installation. Lay out a tarp in front of your fireplace installation to protect the finished floor. Start by installing a concrete board, print side out, to your wall securing it to the joints with drywall screws. Keep eye protection on while cutting and handling the stone veneer. If this is your first-time installing stone veneer, lay out a few feet of stone in front of your project area to plan out your pattern. Begin with corners alternating short and long sides. Apply the USTONE stone veneer adhesive to the back of your stone veneer and install away! Do any cutting outside and use a wet saw or grinder. Add a rustic barn beam to your DIY stone veneer fireplace installation. Install the beam on your fireplace wall then add the stone veneer around it. And if you want to add a TV, be sure to plan ahead and have an electrician install all the wiring before you begin your decorative stone veneer fireplace installation. Once you’re finished and your workspace is clean, sit back and relax and enjoy your new DIY stone veneer fireplace installed with USTONE Adhesive.
For more information about UStone Adhesive and where you can purchase this DIY stone veneer masonry adhesive visit stoneselex.com
Great video, but the music is ultra annoying. I want to hear what you are saying about your work.
Tone down the awful music. cant hear the conversation. never mind I will just switch it to another video.....
Thank you guys for taking the time to post this video. I came across this the beginning of 2022 and JUST completed my fireplace transformation. The backer board and the adhesive made it SO much easier than the mesh and mortar application. Again, many thanks, you helped make my project a reality.
Did you ever find anything out about where to find the Ustone adhesive (in the US), Or something similar?
@@degen_dad7682 I did! I ended up finding it at Menards!
Thanks again!
Great vedio very informative and educational 24 never done this but wouldn’t mind trying it once or twice
Super awesome and simple guide to follow it seems (that is until I attempt it lol)!
You can only hear parts of it! Why would you put music over the instructions? Have you not watched your own video? Horrible!
Brilliant
You guys make it look easy, the caulking tubes a lot quicker and cleaner nice job
What kind of glue or adhesive did they use I couldn't hear it
The 'background' music is so loud, I can't hear what you're saying which is disappointing as I really wanted to learn how to do this.
Did you try using your eyeballs?
@@nehnehnehbatman Nah....... Blind mate!
I had four deep shelves on top of the firepalce which I covered with 3/8 plywood and planning to put the same style stones from Lowes. Can I put the stone directly on the plywood or do I need to put a metal lath or chicken wire on the plywood before putting the stones?
And my another question is what size is the cement board for the walls 1/2” or 1/4”? Thank you
Hey good day can you put the stone straight to drywall?
Awesome video. Thank you very much. ✝️
Thanks guys. Great vid. No ten minute nonsense talking. Question. Where do I find wood like that
I liked the video, best one I’ve seen for laying stone. I didn’t notice the music really until I read the other comments. Some people are wrapped way to tight and need to chill.
I really like this stone. What is the name of this and where can I buy?
Great job! How long did it take and what’s the labor cost for someone like this? Thanks! 😊🙏
Where to I get the metal mounts you used to hang the mantle?
Thank you
I hate to say it but I couldn't watch beyond two minutes due to the overbearing music. Looks like a fantastic video- surely you still have the footage in the computer. Go remix it and tone down that music.
Why all small pieces on the bottom and larger pieces on top?
What is the name of the actual stone in the video?
You do anything with the joints?
Where I can buy ustone adhesive here in Ontario canada
I want to do a stone veneer fireplace that stops at the mantle. It’s been very difficult to find RUclips videos on how to do that because all these guys do the stone veneer all the way to the ceiling and I want it to stop at the mantle. Can anyone provide a link to a video that shows how to do this?
why is the music so loud? you can't hear the instructions.
How did you cut the rock?
What the cost to do job like that?
It turned out beautiful! What stone is that that you used?
Did you ever find out about the stone used?
Nice music,
I see this a lot but everyone forgets to add a conduit for the other cables (HDMI) down to where all your components will be.
Now days your TV, almost all TV's have wireless and it works. I am with you on the HDMI but now with one of my TV's down stares... thing streams via wifi and works perfect. What I would do is put in a cat6 network outlet. More reliable then WIFI.
Had to bail, the music ☹️
Great job boss! Do you know where can I find the U STONE product here in USA? Thank you
Did you ever find ustone adhesive in the US? Or what did you use? I’m looking too
What particular stone was used in this project?
Ever find out what stones used?
Nice music
WHY the loud music on an instructional video???????
If you cut the music for the talking parts it would be ideal. However, it works well during the non talking parts. 👍
I wish the music was louder
Hard to watch. Audio is awful. Really bad music over weak commentary.
Where I can buy ustone adhesive
Did you ever find anything out about where to find the Ustone adhesive? Or something similar?
This type of video is better without music, and if you really want to use it, turn it way down so we can hear what you're saying
Great job but one suggestion turn the music off hard to hear your instructions and it’s distracting.
Almost zero coverage. That doesn't look like a good bond at all.
Need to edit out the music track you put on here, can barely hear what these guys are saying..
Good video but the music is way 2 loud
Turn off the f...in music!!!
back ground noise is way too loud.
Looks good... Why the music ??
How much was the stone?
Why would you even have music??
Music is too loud to hear commentary.
can't hear what you are saying
Music too loud
music is way to loud
LOSE THE BACKGROUND MUSIC!
Turn the damn music off
Music WAY too loud. It would have been more informative if we could hear more of the information.
The music was so annoying and could not hear instructions over the music. Just give us the info and forget the background music. Thanks though.
close caption doesn't even work to fight that music...couldn't hear them, stopped watching 2 minutes in
music is not needed, too loud and irritating. otherwise good info
Could barely hear them explaining over the loud music!
I can't make it through the video with that music, sorry.
Cut the music dude! Can't hear you!
Remove the music so we can hear you speaking at the beginning.
Lose the music
I get carried away with the music, start dancing and miss the point of being tutored. Nutz!
Please turn down the music!!!
For the love of god! Can you kill the music? The audio is unbearable
turn off the music! cant hear anything you are saying
Why do you need loud music over voice???
kill the music !
kill the music
Musis is extremely annoying
Cant. Hear. Shit.
Don’t waste your time on this video, can’t hear crap over the silly music. Terrible commentary. Even the subtitles couldn’t figure out what they were saying.
👎🏽
Turn the dumb music off when your talking
They should have staggered the joints on the concrete board
I'd add, the floor needs whey better quality protection , I'd bet its damaged . Also cut outside, wth its concrete an the very sharp chips are being stepped/ground into the floor, and dragged in an out of work area. Just a couple cents, I do have more tho.
Can't hear what you're saying