If you found the video helpful and want to buy me a coffee i have a page here, every coffee makes a huge difference, so thank you in advance. www.buymeacoffee.com/zeroto60tube/why-i-buy-me-a-coffee
Living Australia I must say something is definitely up with our wifi connections. I'm with TPG and for some reason my otofix OBD scanners won't connect to the wifi and some of our iphones have issues too.. but my Samsung and my old foxwell obd scanner connected fine. Don't know
I have the Dolphin XP-005 which is probably the same basic machine as the XP-005L I would imagine. I purchased this machine the first part of January and was pleased with the machine until a few nights ago when I went to use it onsite and it would not power up. I assumed that I must have bumped the power button and the battery was just discharged. The battery will not take a charge. The machine will run on the power supply but I found a video on testing the battery and the battery shows no voltage. What concerns me is this machine seems to be relatively new on the market and there are several videos on the market about how to change the battery. It makes me think that my problem is not unique. What makes matters worse is nobody has this battery in stock and the cost is $200. The battery is very proprietary in that the battery has 2 input wires for the power supply, 2 wires that the switch for the machine connects to the battery, and 3 wires going to the machine itself. The machine will not run off of the power supply without the battery installed because the power switch on the machine goes into the battery. I was hoping that I would get feedback about any other people having an issue with the battery. Thanks
I had the same issues, sad news your battery pack is dead, only solution is buy new pack, mine was a spare i cut less than a 100 keys it died on my shy of 12months, reason? they say i plug in the adapter all the time. Its a dumb adapter which doesnt sync off signal so the battery will be constant charge and died, a fair bs excuses to sell their pack, but my new replacement seems to works longer past 12month. I only plug it in to charge when the batter drop to 2 bar. Its a design flawed on purpose for the xp005, the battery pack contain the battery and the controller circuit pack. So replacement is expensive for sure. The way it fail is by totally pause machine, u can run test speed at full rpm with adapter plug in , means it has enough power to run with just the power brick but when u about to cut the key , it will auto cycle power, u can do everything normal with the machine except cutting. This is done via firmware lock , PREVENT you from cutting without replacing the faulty battery pack. A douche design if u ask me, i complain to them but they wont remove it via firmware, i was told future models like the cheaper Panda and dolphin 2, has remove this lock limitation, my supplier tested its true.
Neat side hustle 👌. Super interesting. Looks like fun actually. Also watching the Zero to 60 channel. Have a '11 335is w/dct, exciting to see what you do to fund your addiction 😀
you can not cut a aluminum keys with it as i found out the hard way the probe will not work on it has to be steel or brass 10 probes broken but works great now
Дружище, станок просто отличный. Зря жалуешься, что крышка задевает дисплей! Просто поставь его на подставку, которая за дисплеем и будет тебе счастье! Спасибо за обзор, очень понравился :)
After that I’m using the dolphin 005 which is the same machine without the screen and the shield and I cut hundreds of keys with this machine I can say that it’s a great machine. The problem I was facing with this machine that is not cover some keys that other machine will cover easily. So I ended up having 2 machines to cover the other keys that this one missing.
@@avibenyair7861 ah I see so the dolphin mainly works on the high security laser cut keys where the sec e9 works on everything else basically? And when you say dimple cut keys do you mean like the ace circular keys or dimple as in mul T lock keys?
for the internet issue it looks like it runs off a 2.4 hrz connection. if your home internet is on a 5hz it might not work. if you got 2 connections try the 2.4 on your home internet
Might I suggest having Laura do a couple of product reviews...might just bump up your subscriber numbers... But seriously, will stay subscribed because I enjoy the way you shoot these and your car stuff.
Haha, she would probably be keen, she wants to improve her confidence on camera and just be better at presenting things. Thanks for taking the time to come over and sub, really appreciate it.
I’ll buy you a coffee for a few sets of keys 😂 sent to Melbourne and whatever extra you want, went out with the girlfriend and a few mates ended up losing my key’s (for both my cars) and didn’t have second sets when getting them, just moved house’s and had to get them towed and still can’t get into my 2017 Holden Commodore motorsport edition vf series 2 and 2021 Mercedes-Benz GLC-class GLC43 amg
I want to get into key cutting and I’m looking at buying the Xhorse mini plus 2, question I want to know is if all car keys are lost then where do I find the key code to cut a new key? I have a golf for instance, how would I cut a new key if I lost my keys? Cheers 👍🏻
Hello, I got a new machine too, it failed to cut working keys, the left side cut less than the right side. I tried to calibrate the machine 3 times. Any idea why?
Hi mate, I was thinking of buying one of these machines but just wanted to find out a little bit more about it. Your video is being very helpful just out of curiosity does the machine come preloaded with the codes or where would you get the codes for each vehicle?
Hi, Nice review! Just wanted to ask, what is the functional difference between previous model of the machine apart of the screen and protective cover? I am looking to get one of them but trying to figure out the new machine has any advantage over the old one. Regards
Sorry for the delay, i havent logged in to this account for a few weeks. I think functionality wise, screen and protector is all. I believe there are hardware changes inside in regards to motor and the battery, but can not confirm. Either way, very happy with the machine at this point.
Wow 👏 Really Good 👍 Review. I am a Locksmith at Los Angeles. By the way ...1. Where you bought it ? 2. How Much is it ? ... Because, I like to buy same like an your nachine....please Answer Me.
The internal battery died. But aside form that its still going well. Admitadly i dont do many keys compared to a locksmith. But its had a few updates and still cuts perfectly.
Residential and commercial Locky here! Haven’t really seen this Brand befor I’ve always used Silca and keyline what Xhorse machine does standard inline keys and does it also decode and duplicate? Cheers
There so many different vehicles on the market its just not possible to have all the key blanks in dtock. How many key blanks do u order at any given time? Toyota, Nissan, Mazda, BMW, VW, Chevrolet, Isuzu. Trucks Iveco,Mercedes,Scania ,Volvo. Etc etc etc. These blanks r not cheap also u also need to stock tge chips that need to be coded for the car to dtock. Its too much....
Hi mate, good informative video, I have been looking at these machines (locksmith), have a question, have you cut regular general code series keys? Eg: house keys or roller door keys or filing cabinet etc??
You can do single-sided house (and other) keys, but you need to buy the additional clamps. I believe the M4 clamp is for the house keys. M3 clamp does Ford keys.
what do you mean "your horse account give you access to the machine" you need a registered verified account to actually use the machine? and if so do you need a locksmith license or are there any fee with making the account? Im trying to give into the business and would like to know.
Hi Alan, i have never cut any of those, so can't comment with any useful experience. Sorry about that. I will say over the 40 or 50 keys this machine has done its been perfect. Very happy with accuracy. Still on the first cutting but too.
No. Key programming is a challenge. From my experience, you either pay 10k plus for a machine that just does keys, or you spend months working it out the hard way.
I paid a Florida outfit called Locksmith Keyless for one of these. They promised 24-hour shipping. They never had the machines. They refuse to refund me, telling me to "wait another week, wait another week" It's been almost 2 weeks now. Chargeback in progress. Steer clear of these crooks
Have you figured out where to get the info for All Keys Lost on a BMW yet? I know on some other brands you can read the code off the ignition barrel, but I don't believe this is the case with BMWs.
I code keys for cars but just trying to get in cutting keys, my situation is I do mostly German cars so do this one do most German cars or if there is one that you can point me in the right direction to that do most german cars?
This is probabaly the best "value" unit you will find for german car key cutting. I wouldnt recomend it if you are planning to do 20-30 keys every day. I would go for something larger. But for one or two a day, its a brilliant unit.
It is hard to tell from the video about the stop positions. Are the stop positions just a line or is there some sort of physical stop that you can feel?
There are a few lines on the clamp for reference, but the machine checks the position of the key before each cut, so it doesnt really matter where you put the key. Pretty clever really.
Just put it at a rough guide lines, the machine uses electric conductivity with metal( this case the key) to detect and calibrate the key, which is smart but also on and off breaks the probe head, so have a bunch of spare probe ready. They are fairly affordable. Key is clean the key properly, sand it, grind it abit before detecting etc.
@@Will_Fong I got around spending $200 US for a new battery by purchasing a 24 volt Kobalt drill from Lowes. I got a new cable and connected it to the charging pack for the drill. I can now place a battery on the charging pack, plug the connector into the XP-005 and use the 24 volt Kobalt battery to power up the XP-005. I have only had one issue with using the Kobalt battery and that was when the battery did not have a full charge. The cutter was not getting up to speed. I swapped the battery out with a freshly charged one and was good to go. I am still pissed with UHS Hardware because they still have not done anything toward resolving my warranty claim.
Sorry for the delay, i havent logged in to this account for a few weeks. it does not program a key. I am just uploading a video on Mazda key programming with VVDI cheap key programmer.
Perhaps you're not using the correct side (A/B) of clamp or incorrect clamp for type of key. The probe taps the clamp in a few locations to verify proper calibration, it then uses the grounding of the clamp to verify contact with key... if key isn't where it expects the key to be it will create an error.
I am in Vanuatu and would like to buy a machine and have it sent to me in Vanuatu. Do you have a contact of the supplier? I also am looking for a supplier of key blanks and chipped keys. I have an XTOOLD9 pro that I use to add keys to the vehicles here. Thanks: NOEL BEGLEY.
You'll need the M4 clamp to cut house keys and I don't think you can cut by code (I haven't figured it out anyway). The cut key looks a bit off, as it doesn't change depth between pin locations if both pins are of equal depth.
Definitely better, more expensive too. Old model has a design flawed , where the battery pack is combine with controller circuit, its expensive to replace and when battery only is faulty, if firmware locks u from cutting even with the power brick, a shit scam lock. New models doesnt have this lock limitation.
The one i have is a dolphin xp-005l to have never cut a key with it because it breaks the probe tracer all the time had it for a year no warranty for this machine i have done everything to try to fix it SO BUYER BEWARE ON THIS MACHINE REALLY NO SUPPORT OR WARRENTY PIECE OF JUNK
Buenas Tardes, gracias por este video, yo soy de Guatemala y necesito el número de teléfono, Dirección, nombre del lugar y nombre completo de Emily, para comprar yo una máquina de esas gracias. PD. Que le costo a usted, máquina, envio, etc. total . Gracias por su atención.
It would be a good video if you would leave your face out and just concentrate on the machine and what you’re doing and have a better positive attitude
I’ll buy you a coffee for a few sets of keys 😂 sent to Melbourne and whatever extra you want, went out with the girlfriend and a few mates ended up losing my key’s (for both my cars) and didn’t have second sets when getting them, just moved house’s and had to get them towed and still can’t get into my 2017 Holden Commodore motorsport edition vf series 2 and 2021 Mercedes-Benz GLC-class GLC43 amg
If you found the video helpful and want to buy me a coffee i have a page here, every coffee makes a huge difference, so thank you in advance.
www.buymeacoffee.com/zeroto60tube/why-i-buy-me-a-coffee
Where do you get the codes for each car?
Is the machine still running well? Maybe make a video with an update?
How do you get the codes
Hi there great video… question what duties did you pay when it hit the country and do you pay it?
This was. Notable choice I made buying it never cuts right or decide right no matter if calibrate or not
Strange, my machine has been flawless coming up 3 years now. My only complaint the lithium battery inside has died. So i do need to plug it in.
how can i get one is still available @@testandtune6096
Living Australia I must say something is definitely up with our wifi connections. I'm with TPG and for some reason my otofix OBD scanners won't connect to the wifi and some of our iphones have issues too.. but my Samsung and my old foxwell obd scanner connected fine. Don't know
Good review. I like the improvements over the previous model of dolphin. Thanks for sharing.
Thanks for watching!
درود برشما. برای کد دهی چکار کنم؟
I have the Dolphin XP-005 which is probably the same basic machine as the XP-005L I would imagine. I purchased this machine the first part of January and was pleased with the machine until a few nights ago when I went to use it onsite and it would not power up. I assumed that I must have bumped the power button and the battery was just discharged. The battery will not take a charge. The machine will run on the power supply but I found a video on testing the battery and the battery shows no voltage. What concerns me is this machine seems to be relatively new on the market and there are several videos on the market about how to change the battery. It makes me think that my problem is not unique. What makes matters worse is nobody has this battery in stock and the cost is $200. The battery is very proprietary in that the battery has 2 input wires for the power supply, 2 wires that the switch for the machine connects to the battery, and 3 wires going to the machine itself. The machine will not run off of the power supply without the battery installed because the power switch on the machine goes into the battery. I was hoping that I would get feedback about any other people having an issue with the battery. Thanks
I had the same issues, sad news your battery pack is dead, only solution is buy new pack, mine was a spare i cut less than a 100 keys it died on my shy of 12months, reason? they say i plug in the adapter all the time. Its a dumb adapter which doesnt sync off signal so the battery will be constant charge and died, a fair bs excuses to sell their pack, but my new replacement seems to works longer past 12month. I only plug it in to charge when the batter drop to 2 bar. Its a design flawed on purpose for the xp005, the battery pack contain the battery and the controller circuit pack. So replacement is expensive for sure. The way it fail is by totally pause machine, u can run test speed at full rpm with adapter plug in , means it has enough power to run with just the power brick but when u about to cut the key , it will auto cycle power, u can do everything normal with the machine except cutting. This is done via firmware lock , PREVENT you from cutting without replacing the faulty battery pack. A douche design if u ask me, i complain to them but they wont remove it via firmware, i was told future models like the cheaper Panda and dolphin 2, has remove this lock limitation, my supplier tested its true.
As an EE, for me, it's an easy fix. Voltage, current, ripple...
Neat side hustle 👌. Super interesting. Looks like fun actually. Also watching the Zero to 60 channel. Have a '11 335is w/dct, exciting to see what you do to fund your addiction 😀
Thanks man, the key side was purely an offshoot of doing the DCT and MSD81 swaps. Hopefully it pays off, but i think it will.
you can not cut a aluminum keys with it as i found out the hard way the probe will not work on it has to be steel or brass 10 probes broken but works great now
Дружище, станок просто отличный. Зря жалуешься, что крышка задевает дисплей! Просто поставь его на подставку, которая за дисплеем и будет тебе счастье! Спасибо за обзор, очень понравился :)
After that I’m using the dolphin 005 which is the same machine without the screen and the shield and I cut hundreds of keys with this machine I can say that it’s a great machine. The problem I was facing with this machine that is not cover some keys that other machine will cover easily. So I ended up having 2 machines to cover the other keys that this one missing.
Which other machines did you purchase that had to cover the other keys?
@@vehzi sec e9
@@avibenyair7861 what keys do you use that machine for?
@@vehzi the keys that I got across that not supported by dolphin is motorcycle keys, dimple keys, cabinets keys and other small single side keys.
@@avibenyair7861 ah I see so the dolphin mainly works on the high security laser cut keys where the sec e9 works on everything else basically? And when you say dimple cut keys do you mean like the ace circular keys or dimple as in mul T lock keys?
Very detailed info, thank you, my friend.
Very welcome
for the internet issue it looks like it runs off a 2.4 hrz connection. if your home internet is on a 5hz it might not work. if you got 2 connections try the 2.4 on your home internet
Might I suggest having Laura do a couple of product reviews...might just bump up your subscriber numbers... But seriously, will stay subscribed because I enjoy the way you shoot these and your car stuff.
Haha, she would probably be keen, she wants to improve her confidence on camera and just be better at presenting things. Thanks for taking the time to come over and sub, really appreciate it.
The key is the nose of the dolphin it's huge and light with the left eye being blue
I'm up in the air between this and the triton plus
Well done. Thoroughly enjoyed the video.
Glad you enjoyed it
I’ll buy you a coffee for a few sets of keys 😂 sent to Melbourne and whatever extra you want, went out with the girlfriend and a few mates ended up losing my key’s (for both my cars) and didn’t have second sets when getting them, just moved house’s and had to get them towed and still can’t get into my 2017 Holden Commodore motorsport edition vf series 2 and 2021 Mercedes-Benz GLC-class GLC43 amg
Hi mate can I please ask if it’s still working after one year, I tried to purchase this if it’s still okay thanks mate
I want to get into key cutting and I’m looking at buying the Xhorse mini plus 2, question I want to know is if all car keys are lost then where do I find the key code to cut a new key? I have a golf for instance, how would I cut a new key if I lost my keys?
Cheers 👍🏻
Hello, I got a new machine too, it failed to cut working keys, the left side cut less than the right side. I tried to calibrate the machine 3 times. Any idea why?
Sorry i have no idea. Did they fix it for you?
Hi mate, I was thinking of buying one of these machines but just wanted to find out a little bit more about it. Your video is being very helpful just out of curiosity does the machine come preloaded with the codes or where would you get the codes for each vehicle?
hey @mrcheck1 did you end up buying the machine, if so how did it preform compared to your expectations
Hi there I was wondering if managed to find out where to find the key codes? Thanks
Hi there, just wondering how do I find the key codes ?
Thanks for the video
What is the deal with breaking the probe off was looking further 🤔 is cleaning the key the problem ?
Having the earlier dolphin i really wish i have the cover, its mess on my desk, i wonder do they sell the cover only.
Excellent video, thanks for sharing 👍 😀
Many thanks
Good video. Does it cut motorcycle keys? And can iy operate offline?
Single biggest improvement is using one jaw instead of two.
Very brilliant
Hi, Nice review!
Just wanted to ask, what is the functional difference between previous model of the machine apart of the screen and protective cover?
I am looking to get one of them but trying to figure out the new machine has any advantage over the old one.
Regards
Sorry for the delay, i havent logged in to this account for a few weeks. I think functionality wise, screen and protector is all. I believe there are hardware changes inside in regards to motor and the battery, but can not confirm. Either way, very happy with the machine at this point.
You can do updates on it without having to hook it up to a PC
Please respond, how is the machine doing now and do you have any problems with it? And would you recommend if over the condor mini?
Perfect, no issues with the machine at all. Which is strange for an xhorse product
How u get the pin code. What website was that
Hi I’m thinking of purchasing this product can I ask how do you code the key what do you need for that . I’m from the uk
Can you cut keys of all types house,commercial, and cars.
Wow 👏 Really Good 👍 Review. I am a Locksmith at Los Angeles. By the way ...1. Where you bought it ? 2. How Much is it ? ... Because, I like to buy same like an your nachine....please Answer Me.
I bought it direct from vvdi. It was $3500aud ish.
Wondering if it'll cut house keys (By bitting)
will this also cut residential home keys
hi when performing the lost all keys where do you find the factor code to cut the key keys? thanks
On BMW, some cas 2 and cas 3, vvdi bimtool can generate it. However a lishy works quite well for quickly decoding the key barrel.
Whats the updated review after using it for 2 years ?
The internal battery died. But aside form that its still going well. Admitadly i dont do many keys compared to a locksmith. But its had a few updates and still cuts perfectly.
Where did you get the 1380 code for all keys lost
Does it work for newer model 23-24?
does this machine cut lockwood keys to code??
what did you use to make the Transponder chip for the BMW please.
likely hitag
how did you get the all keys lost code?
Some BMW Cas modules, can be run through specific software that will output the key code. I used VVDI Bimtool on this one.
Does this cut tubular/ barrel keys? (1137B style)
Hello I am very interested about this business. Key copy. But I don't have any knowledge in it. How can I study and learn skills? Thank you
Residential and commercial Locky here! Haven’t really seen this Brand befor I’ve always used Silca and keyline what Xhorse machine does standard inline keys and does it also decode and duplicate? Cheers
Do you use the same cutter for residential and automotive?
How much we can make with this machine ?
There so many different vehicles on the market its just not possible to have all the key blanks in dtock. How many key blanks do u order at any given time? Toyota, Nissan, Mazda, BMW, VW, Chevrolet, Isuzu. Trucks Iveco,Mercedes,Scania ,Volvo. Etc etc etc. These blanks r not cheap also u also need to stock tge chips that need to be coded for the car to dtock. Its too much....
Have you done any laser cut keys with it yet looking to buy one currently ?
I havent
what is the tools name to get the key code? im stuck at that part.
Lishi
Hi mate, good informative video, I have been looking at these machines (locksmith), have a question, have you cut regular general code series keys? Eg: house keys or roller door keys or filing cabinet etc??
You can do single-sided house (and other) keys, but you need to buy the additional clamps. I believe the M4 clamp is for the house keys. M3 clamp does Ford keys.
how to buy it ?
Please I need a class I can pay for it
what do you mean "your horse account give you access to the machine" you need a registered verified account to actually use the machine? and if so do you need a locksmith license or are there any fee with making the account? Im trying to give into the business and would like to know.
You just buy them. But I have a good relationship with them.
Would you recommend this machine for Magnum Key Cutting?
Hi Alan, i have never cut any of those, so can't comment with any useful experience. Sorry about that. I will say over the 40 or 50 keys this machine has done its been perfect. Very happy with accuracy. Still on the first cutting but too.
Hello,
Is there a manual machine that can do that, cheaper ofc ?
CAN YOU CUT FORD TIBBY KEYS?? DECODE TIBBY KEYS ALSO??
I believe it can do the tibbet with the correct clamp, not the normal supplied clamp
Good video
How much it cost?
Around $2800USD
Wich lishi you use? Pin for key get from. Lishi or from Cas data?
In this video it came from cas data. Which the Dolphin can convert to a bitting. However it does need internet to do that conversion.
Hey does this machine program the keys ?
No. Key programming is a challenge. From my experience, you either pay 10k plus for a machine that just does keys, or you spend months working it out the hard way.
Cgdi godzilla or doplhin ? Good?
How did you get your Hitag to work?
I paid a Florida outfit called Locksmith Keyless for one of these. They promised 24-hour shipping. They never had the machines. They refuse to refund me, telling me to "wait another week, wait another week" It's been almost 2 weeks now. Chargeback in progress. Steer clear of these crooks
Have you had any issues with the machine after one year
Have you figured out where to get the info for All Keys Lost on a BMW yet?
I know on some other brands you can read the code off the ignition barrel, but I don't believe this is the case with BMWs.
I have an E66 that has a working remote key, but is missing the blade.
VVDI BMW will give a key cut code for some. However a lishi is much easier to use than i ever expected.
@@testandtune6096 I used a lishi and decoded and cut the key in about 3 minutes. Was super simple.
I think older HU58 keys would be more of a pain.
@@wishie197which model lishi key there are 30 different ones
@@testandtune6096what model lishi key mate
I code keys for cars but just trying to get in cutting keys, my situation is I do mostly German cars so do this one do most German cars or if there is one that you can point me in the right direction to that do most german cars?
This is probabaly the best "value" unit you will find for german car key cutting. I wouldnt recomend it if you are planning to do 20-30 keys every day. I would go for something larger. But for one or two a day, its a brilliant unit.
@@testandtune6096 I truly appreciate you taking the timeout to reply.
@@testandtune6096I thought this was a key cutter for high volume. 2-3 keys a day is not good 😢
Hey I’m willing to pay for a class to learn how to go about please
hey just wondering how you would rate this machine 2 years later im looking to buy one currently ?
My only issue, i didnt use it for about 2 months and the battery has died. So now it only works when connected to external power.
@@testandtune6096 CRIKEY!
Where did you purchase?
It is hard to tell from the video about the stop positions. Are the stop positions just a line or is there some sort of physical stop that you can feel?
There are a few lines on the clamp for reference, but the machine checks the position of the key before each cut, so it doesnt really matter where you put the key. Pretty clever really.
Just put it at a rough guide lines, the machine uses electric conductivity with metal( this case the key) to detect and calibrate the key, which is smart but also on and off breaks the probe head, so have a bunch of spare probe ready. They are fairly affordable. Key is clean the key properly, sand it, grind it abit before detecting etc.
@@Will_Fong I got around spending $200 US for a new battery by purchasing a 24 volt Kobalt drill from Lowes. I got a new cable and connected it to the charging pack for the drill. I can now place a battery on the charging pack, plug the connector into the XP-005 and use the 24 volt Kobalt battery to power up the XP-005. I have only had one issue with using the Kobalt battery and that was when the battery did not have a full charge. The cutter was not getting up to speed. I swapped the battery out with a freshly charged one and was good to go.
I am still pissed with UHS Hardware because they still have not done anything toward resolving my warranty claim.
Do you need a subscription to program keys?
This tool doesnt do programming
Does it program the new key and is there a video on this
Sorry for the delay, i havent logged in to this account for a few weeks. it does not program a key. I am just uploading a video on Mazda key programming with VVDI cheap key programmer.
Why am I getting error code 2 Not detected probe when I tried to decode the key or cut?
Perhaps you're not using the correct side (A/B) of clamp or incorrect clamp for type of key. The probe taps the clamp in a few locations to verify proper calibration, it then uses the grounding of the clamp to verify contact with key... if key isn't where it expects the key to be it will create an error.
@@chiefone4u2 Thanks for your reply I got sorted
I am in Vanuatu and would like to buy a machine and have it sent to me in Vanuatu. Do you have a contact of the supplier? I also am looking for a supplier of key blanks and chipped keys. I have an XTOOLD9 pro that I use to add keys to the vehicles here. Thanks: NOEL BEGLEY.
you is best
Can this cut 2024 cars
Machine come with bolt down kit ?
Unfortunately no it didnt.
Have you cut house keys on this? I keep getting an error and it doesn’t probe the deeper cuts
No house keys, but i htink you would need ones it is configured for.
You'll need the M4 clamp to cut house keys and I don't think you can cut by code (I haven't figured it out anyway). The cut key looks a bit off, as it doesn't change depth between pin locations if both pins are of equal depth.
Is it better than the normal xp005 ?
Definitely better, more expensive too. Old model has a design flawed , where the battery pack is combine with controller circuit, its expensive to replace and when battery only is faulty, if firmware locks u from cutting even with the power brick, a shit scam lock. New models doesnt have this lock limitation.
Machine did not last long and is starting to make mistakes
does it copy any household key ?
Yes it does
only fo car key or something else
Dolphin 005 or 005L your opinion
The L all day long, mainly for the protective cover. But the screen is also handy and makes using it quicker.
@@testandtune6096 thanks one doubt this machine cutting ford tibbe keys old model
@@sribalaji8106 Yes it cuts Tibbe keys but you need to purchase the M3 Jaw I believe its the M3 might be the M4 I forget lol
Mallory Bridge
The one i have is a dolphin xp-005l to have never cut a key with it because it breaks the probe tracer all the time had it for a year no warranty for this machine i have done everything to try to fix it
SO BUYER BEWARE ON THIS MACHINE REALLY NO SUPPORT OR WARRENTY PIECE OF JUNK
The xp-005l is the model he is reviewing, is that what you can't cut a key with?
JUNKJUNKJUNK
Not customer support
Pacocha Fork
Does both
Many problem that's machine note repair not repair customers service
Buenas Tardes, gracias por este video, yo soy de Guatemala y necesito el número de teléfono, Dirección, nombre del lugar y nombre completo de Emily, para comprar yo una máquina de esas gracias. PD. Que le costo a usted, máquina, envio, etc. total . Gracias por su atención.
Not purchase this machine
What problems have you had? Mine has been good so far. However i know what you mean about thier customer service. It is rubbish
It would be a good video if you would leave your face out and just concentrate on the machine and what you’re doing and have a better positive attitude
Bhai may ko bhe sekna hay kay aap ka contraycat number mel sakta hay
I’ll buy you a coffee for a few sets of keys 😂 sent to Melbourne and whatever extra you want, went out with the girlfriend and a few mates ended up losing my key’s (for both my cars) and didn’t have second sets when getting them, just moved house’s and had to get them towed and still can’t get into my 2017 Holden Commodore motorsport edition vf series 2 and 2021 Mercedes-Benz GLC-class GLC43 amg
Can you enter the cuts to make a key?