Your videos are the best! I commented before about putting your grip on my VXR 28 just before bow seasoned opened up here in Indiana. I’ve gun hunted my whole life but this is my first bow. Filled my buck tag 2 weeks in on a big 8 pointer. I straight up caught the bow fever. Gun is in right now and I’m not even using one this year. I’m going bow only for whitetails from here on out. Getting that first one with a bow was a whole new level of excitement. I was thinking about getting the 31.5 with a single pin and setting it up for longer range shots while hunting field edges and using the 28 in my stand. Looks Like this V3 might be the one. Take care.
@@buddavisuals5902 Nope. Bottom of the flame is the coolest part. The middle where the fuel is equally mixing with oxygen is the hottest by a factor of about 4.
Way to go bud. Glad to see that archery is continuing to be loved and appreciated by the younger generations. You'll be shooting 70lbs before you know it.
that rattle noise is probably the hamskea micro-tune dials. A lot of the time after you tighten the set screws there is still some play in the dials which can cause some vibration noise. Either that or your sight for sure though. Awesome build man!
Chris you inspired me to get into bow hunting and I got my biggest buck this year with my bow. Now I want to get into competitive archery, do you have any tips on getting started?
Awesome build Chris. Great shooting too. I may have to go shoot one of these at my local shop. I think some of the noise you can hear is from the rest cord. My girlfriends dad and I both have VXR 31.5's that we bought at the same shop and had set up by the same guy. His has a Hamskea limb driven rest, and mine has an Ultrarest Integrate. His is slightly, but noticeably louder than mine. It is almost like a "guitar string" type sound. It seems to be coming from the limb driver cord when it goes from slack to tight, and creating a small vibration since it is attached to the spring, and therefore has some movement capability. Since the Ultrarest goes from tight to slack, it doesn't make this sound. It is minor, and more personal preference. Even with that tiny noise, it is still an incredibly quiet bow. Just my 2 cents, and something to check out and see if it is in fact making some noise. I know mine is dead quiet.
I also had a buzzing vibration...it was a small screw on the Hamskea rest. Took me two months of playing when the sight until I found it was on the rest.
The RS string level doesn't snap onto the bare string snug and flops backwards. You have to get it on the serving to give you the true level of the string, or just push the level against the string lightly to get it flush to the string.
l've seen several reviews and l'm still undecided on which bow to buy, but l really enjoyed this video. lt takes work to set up and make adjustments, but i've learned that it's worth it. l like this Mathews v3. it wold be wonderful if it were carbon. Good work Chris
I am seeing a lot online about high foc arrows and high total arrow weights. I would like to hear what your thoughts are on that for hunting setups and what you are shooting this year. Keep the videos coming!
Chris, I literally just installed the ultra view 2 scope on my axcel sight and had the same buzz sound and couldn’t figure it out! What was your buzz sound coming from because after you fixed the stabilizer it sounded like it was still happening. My ultra view 2 scope keeps coming loose after around 40 arrows I have to retighten. Any insight on this minor issue?
Nice build and awesome bow...still heard a little vibration until the very last shot ,but that thing looks so sweet and I know within the first hour groups like that at 60 yards is pretty dang good!!!
I’m sure someone has already mentioned it. Just be careful pressing the v3 bows and any other “past parallels” limbs on the last chance options. The fingers have to be moved all the way in so they don’t put tension on that skinny part of the limb. Sweet bow build though!
I see you “Robin Hooded” arrows hanging on your wall?! That’s freakin badass bro! I noticed it because about two weeks ago I did the same thing, I split my Easton axis arrow also and min is hanging up in my drive port... just thought I mention, great video, awesome bow! Hopefully I can get my hands on one eventually, great content, keep it coming!
Awesomeness! I want to get this bow! My last was the Halon 6 for Christmas when it came out. Its been a GREAT BOW! I kinda like to upgrade every now and again. And yes, your new bow is QUIET!
Hamskea has a update to there trinity rest mounting plates. They have a mounting plate with a center set screw hole so they can be used on the Mathews risers.
Thats because your stuck shooting those bows only. Mathews is not the best any more. Every one has their opinion but when opinion turns to fact I shoot a g-5 black 3, I used to be a mathews fan but I learned like everyone else. Dude that bow treats you good try shooting it no comparison.
Mr bee i admire you like you dont know i wish I can shoot the way you do. What I mean is I thought you shot for mathews professionaly. If I am wrong I apologize.
I have the same set up Chris. my only question is what bow case do u use to carry the set up with scope on it. or do u remove scope every time n check zero every time u assemble it..
It sounds like it's still making a 'buzz' sound even after tightening that cap. My VXR makes the same noise. I narrowed it down to loose fiber optics in the sight. I'm almost positive that's your problem as well, sounds exactly the same as mine. I run a Fast Eddie. Not sure if there's much you can do to fix it other than seeing if the sight can be warranted out for a new one.
When you set your center shot, do you run the center of the arrow through the center of the Berger hole? Or the bottom of the arrow through the center of the Berger hole?
Just curious Chris....with that left tear at 8' why not just leave your rest dead center and just flip or adjust top hat size on either the top and the bottom before having to move it out of center?
I ordered a V3 two months ago, paid in full, then a week ago lost budget for accessories(bills), should I cancel bow order? I won’t have the money for a rest, sight and arrows for a while, I’m a stay at home dad. Do you think Mathews will come out with a new model in November, I should have the money for the accessories?
I have the same sight with the ultraview scope and there is something loose on it but I cant find it. Every screw is tight and it still has some vibration/noise when I shoot
why did you put a hamskea release on the v3 instead of the Matthews drop away? does the hamskea have some more advantages? Asking cuz I'm getting a v3 and don't know which rest to put
Awesome bow build Chris. Makes me want to go out and buy one now with all the accessories! 🤙🏼 wish I lived next door to you man. Is the Hamskea rest noisy?
Do you bare shaft tune your new bows? The reason I ask, is that I have a new V3 27 that I cannot get to bare shaft tune unless everything is completely out of whack. My local dealer say he spoke with Mathews about the issue and they claim that the bow is to fast to bare shaft tuned? Its been several years since I purchased a new bow with the last one being a solo cam. Any help would be appreciated.
Hi Chris, is there a reason you did not use the Mathews top hat system to shim the cam for paper tuning so that you can leave the rest at 13-16” centershot?
Sorry to tell you Chris but the blue part of the flame is actually the hottest, while the orange/yellow is the coolest. The reason things burn better (cord melting) in the orange part of the flame is due to the volume of the flame. If you look at the volume of blue flame to orange flame, there is substantially more orange flame. This allows more heat to be conducted into the material you are burning. So while your logic is correct that the blue flame will heat the cord slower, its actually because of volume not temperature. Thanks for the great video!
Hey, Chris whats up !!! do you shoot the hunting class with the V3 ?? new to learning about the bow sports.... wondering witch way i should go getting into the sport.... ???
You have made me love bow hunting and archery in general so much and I’m glad your an influencer of the way I shoot
Same 🙌🏼🙌🏼
Your videos are the best! I commented before about putting your grip on my VXR 28 just before bow seasoned opened up here in Indiana. I’ve gun hunted my whole life but this is my first bow. Filled my buck tag 2 weeks in on a big 8 pointer. I straight up caught the bow fever. Gun is in right now and I’m not even using one this year. I’m going bow only for whitetails from here on out. Getting that first one with a bow was a whole new level of excitement. I was thinking about getting the 31.5 with a single pin and setting it up for longer range shots while hunting field edges and using the 28 in my stand. Looks Like this V3 might be the one. Take care.
FYI Chris
The blue part of the flame 🔥 is the hottest part
Lol 😂
@@buddavisuals5902 Nope. Bottom of the flame is the coolest part. The middle where the fuel is equally mixing with oxygen is the hottest by a factor of about 4.
FYI the blue part of the flame is the hottest part. Great tip though about melting slowly the ends of the loops.
I just want to say I love your videos and how you explain things. I’ve learned a lot from you.
I absolutely love watching bow builds from this guy, its always so cool to watch!
Who else was waiting for Chris to make the V3 bow build as soon as you saw it release?
I was
He was the first person I thought of
Well my cousin told me that the v3 came out and I was so excited to watch this video
Me
As an archer that wants to learn how to set up my own bow, this video really helped explain the steps involved. Nice job and sweet bow man!
Just maxed out my youth bows weigh today. Time for an adult now I guess 🤷🏼♂️
What poundage did your bow max out at?
@@landonglick7174 I think 55
I maxed my youth bow out too. It maxes at 70
That's a great feeling ngl
Way to go bud. Glad to see that archery is continuing to be loved and appreciated by the younger generations. You'll be shooting 70lbs before you know it.
Love the bow builds Chris can’t wait to see the vid on the Kansas buck
Me too I’m pumped to see that video
Same that thing is monster
The buzz the bow is making is driving me nuts.
in a good way? what might be the issue for a loud or buzzing bow?
@@Firefox-cr3jw Probably the sight vibrating. It's in a bad way cause it isn't part of the riser and sounds more unnatural.
that rattle noise is probably the hamskea micro-tune dials. A lot of the time after you tighten the set screws there is still some play in the dials which can cause some vibration noise. Either that or your sight for sure though. Awesome build man!
Chris you inspired me to get into bow hunting and I got my biggest buck this year with my bow. Now I want to get into competitive archery, do you have any tips on getting started?
He definitely inspired me to get in to bow hunting maby I can get a big buck to this season lol
@@masonlanning4031 Good Luck!
I think you should do an informative video on shooting a back tension release! Just what you do and how you go about it every time!
Awesome build Chris. Great shooting too. I may have to go shoot one of these at my local shop.
I think some of the noise you can hear is from the rest cord. My girlfriends dad and I both have VXR 31.5's that we bought at the same shop and had set up by the same guy. His has a Hamskea limb driven rest, and mine has an Ultrarest Integrate. His is slightly, but noticeably louder than mine. It is almost like a "guitar string" type sound. It seems to be coming from the limb driver cord when it goes from slack to tight, and creating a small vibration since it is attached to the spring, and therefore has some movement capability. Since the Ultrarest goes from tight to slack, it doesn't make this sound. It is minor, and more personal preference. Even with that tiny noise, it is still an incredibly quiet bow.
Just my 2 cents, and something to check out and see if it is in fact making some noise. I know mine is dead quiet.
chris bee : *coughed
chris bee : "corona"
*Is still relevant
It got a lil annoying😂
I got covid now and it sucks lol
My thought are with you, hope you have a speedy recovery.
Also Chris bee "SupposeBly"
You should do a giveaway on your old bow. It would be a huge upgrade for some of us that can't afford a mathews upgrade....lol
Bought myself a V3 31 for my elk hunt this fall.. Super Excited! 😆😆
Going down to Lancaster today for my V3.
Can’t wait!
You should do a video on your bow room! You’ve changed things around! Great bow build though!!! Can’t wait to see the rest of the videos!!
I also had a buzzing vibration...it was a small screw on the Hamskea rest. Took me two months of playing when the sight until I found it was on the rest.
The RS string level doesn't snap onto the bare string snug and flops backwards. You have to get it on the serving to give you the true level of the string, or just push the level against the string lightly to get it flush to the string.
l've seen several reviews and l'm still undecided on which bow to buy, but l really enjoyed this video. lt takes work to set up and make adjustments, but i've learned that it's worth it. l like this Mathews v3. it wold be wonderful if it were carbon. Good work Chris
I am seeing a lot online about high foc arrows and high total arrow weights. I would like to hear what your thoughts are on that for hunting setups and what you are shooting this year. Keep the videos coming!
Thanks for actually going through your entire process. This helps me a lot.
Love hamskea rests. Got one on my old switchback xt. Had to shim it with some washers because it has a thinner riser but worked out great
Great build and vid buddy! AND almost to 100k 👍 KS monster, 100k...great V3 vid. Whats next? 😁
He’s got a 100k 🥳🥳🥳🥳🥳🥳🥳🥳🥳🎉🎉🎉🥳🥳🥳🥳🥳
@@remingtonsmith734 8 iTunes 5u 55p8xi u
Killing it!
Thanks Chris, awesome video. How much was your set up here? Could you share the breakdown please?
What bow sight is that
Just going to go to bed but I have to stay up for this
Where did you get the yellow rings on the stabilizer
Chris, I literally just installed the ultra view 2 scope on my axcel sight and had the same buzz sound and couldn’t figure it out! What was your buzz sound coming from because after you fixed the stabilizer it sounded like it was still happening. My ultra view 2 scope keeps coming loose after around 40 arrows I have to retighten. Any insight on this minor issue?
I noticed that buzz after he said he fixed it too. Definitely sounded like something loose or rattling
It's been so long since I have watched bro u have definitely grown clout wise
First time for everything. Bullet hole first try never seen Chris do that before. Good job man keep it up.
I just put this bow on layaway , I just got into archery and this my first bow. I’m excited to pay it off and start practicing
Chris, great videos. I started watching them the other evening and really got hooked….
Nice build and awesome bow...still heard a little vibration until the very last shot ,but that thing looks so sweet and I know within the first hour groups like that at 60 yards is pretty dang good!!!
I had that same rattle from that side bar mount! Took me forever to find it. Thought I was going crazy!
Dude, I could watch this for hours. Just setting up new bows.
I want to get the Stoke so bad some day! It’s my dream bow, hopefully it happens some day!
Well don Mathews for thinking about bow presses when designing not need to buy adaptors as you do with other brands
Dropping vids at 1030 when I’m about to go to bed dang it! Now I gotta watch! Lol love the videos!
Chris: let’s go back 8 ft
Me: why did you go back 8 yards not 8 ft?
No one “ “
Chris “on an archery bow”
🤣🤣🤣🤣🤣🤣🤣
I’m sure someone has already mentioned it. Just be careful pressing the v3 bows and any other “past parallels” limbs on the last chance options. The fingers have to be moved all the way in so they don’t put tension on that skinny part of the limb. Sweet bow build though!
I've never seen someone so steady and focused during a shot .
Congratulations on 100K
I just got my first bow and I enjoy it, think for all the think u show on RUclips,
I see you “Robin Hooded” arrows hanging on your wall?! That’s freakin badass bro! I noticed it because about two weeks ago I did the same thing, I split my Easton axis arrow also and min is hanging up in my drive port... just thought I mention, great video, awesome bow! Hopefully I can get my hands on one eventually, great content, keep it coming!
Awesomeness! I want to get this bow! My last was the Halon 6 for Christmas when it came out. Its been a GREAT BOW! I kinda like to upgrade every now and again. And yes, your new bow is QUIET!
Dang. I need one of those ultra views! Been looking at them recently. Didn’t realize Chris had them all 😂
Hamskea has a update to there trinity rest mounting plates. They have a mounting plate with a center set screw hole so they can be used on the Mathews risers.
U single handedly got me into hunting
Monkey tails work great above the slide lock on the Hamskea and their easy to take on and off when tuning. Serving is a good idea as well.
Love that Ultraview hinge......I spy with my little eye.....a wrist sling mounting point maybe?
Im big on having a quiet bow you can take a nap between shots she's so quiet, has mathews finally made a silent bow. Good luck with it Bee.
Thats because your stuck shooting those bows only. Mathews is not the best any more. Every one has their opinion but when opinion turns to fact I shoot a g-5 black 3, I used to be a mathews fan but I learned like everyone else. Dude that bow treats you good try shooting it no comparison.
@@josephpapale7087 I'm stuck shooting those bows only? Not quite sure what you mean by that.
Mr bee i admire you like you dont know i wish I can shoot the way you do. What I mean is I thought you shot for mathews professionaly. If I am wrong I apologize.
Just finished your proving ground video from mathews! Can't wait for that Kansas buck to drop here on your channel! Congrats on a mega buck!
Now I have a question for you Chris, have you ever checked how level that clip on level is?
I have the same set up Chris. my only question is what bow case do u use to carry the set up with scope on it. or do u remove scope every time n check zero every time u assemble it..
DEFINITELY Looking to get a V3 So thanks for the build, but now I don't trust my shop to put it together in detail like you did lmao 🤣
That bow is SICK! Also, can’t wait to see that new Ultraview Hinge update. Looks awesome!
Was about to go to sleep and then I refreshed RUclips and saw this. Time for a late night
It sounds like it's still making a 'buzz' sound even after tightening that cap. My VXR makes the same noise. I narrowed it down to loose fiber optics in the sight. I'm almost positive that's your problem as well, sounds exactly the same as mine. I run a Fast Eddie. Not sure if there's much you can do to fix it other than seeing if the sight can be warranted out for a new one.
Not me watching this in September of 2021 and listening to Chris talk about corona being done when this comes out😂😂
Hi, Chris.
Wonderful V3 bow, unfortunately I will never be able to have it!
Congratulations on what you do!
Take a drink evey time he drops something 😂 awesome video!
Just got the vxr and they just came out with the v3 I need new center serving 😂already
What!
Didn’t you know that their new bow was about to come out?
Nothing wrong with the vxr!
When you set your center shot, do you run the center of the arrow through the center of the Berger hole? Or the bottom of the arrow through the center of the Berger hole?
Just curious Chris....with that left tear at 8' why not just leave your rest dead center and just flip or adjust top hat size on either the top and the bottom before having to move it out of center?
beautiful job Chris with greetings from Poland👌
You release this so I see it first thing in the morning?!?! How am I supposed to go to work now?! 👀
Congratulations on 100k man watching you has made me really want to get into target archery and bow hunting
That thing just looks so smooth.
Great setup thanks for sharing
I ordered a V3 two months ago, paid in full, then a week ago lost budget for accessories(bills), should I cancel bow order? I won’t have the money for a rest, sight and arrows for a while, I’m a stay at home dad. Do you think Mathews will come out with a new model in November, I should have the money for the accessories?
Your and miss mouse's vids are better than any tv, plus educational, thanks and keep it up.
I have the same sight with the ultraview scope and there is something loose on it but I cant find it. Every screw is tight and it still has some vibration/noise when I shoot
why did you put a hamskea release on the v3 instead of the Matthews drop away? does the hamskea have some more advantages? Asking cuz I'm getting a v3 and don't know which rest to put
Yes! Always makes my day. You should do another podcast
I'm wondering if the long version pulls back easier than the short version.
Set at the same poundage of course
And so the videos begin.🙌🏽🙌🏽🐝
What release do you use? It sounds like it has a safety that you switch off before you shoot
Love these videos. I am curious as to why you don't put in peep before setting the center shot?
Awesome bow build Chris. Makes me
want to go out and buy one now with all the accessories! 🤙🏼 wish I lived next door to you man. Is the Hamskea rest noisy?
why do you align your peep to the middle of your sight tape? and would this be the same with a 3 pin?
Do you bare shaft tune your new bows? The reason I ask, is that I have a new V3 27 that I cannot get to bare shaft tune unless everything is completely out of whack. My local dealer say he spoke with Mathews about the issue and they claim that the bow is to fast to bare shaft tuned? Its been several years since I purchased a new bow with the last one being a solo cam. Any help would be appreciated.
I miss the Easton FMJ and helios vanes, that was my favorite arrow set up.
I got the vertex thinking about getting one of them
I started shooting mathews again this year but prefer hoyts grip. I tried the side plates still wobbling. Your grip how close is the feel to hoyts
which bow did you chose Chris? The 31" or the 27"? Thanks John
Hi Chris, is there a reason you did not use the Mathews top hat system to shim the cam for paper tuning so that you can leave the rest at 13-16” centershot?
Shop I work at in se Michigan sold so many vxr’s this year, excited to see how this v3 is gonna do
Now there all for sale ebay is flooded with them
Would you recommend this bow for a 30.5 draw lenght guy? Im a bit worried about the string angle
Chris Bee said ‘boogers’. As soon as he was talking about the grip sticky stuff, I thought.... say it...say it ... say ‘booger’. And he did!!!
Naw it sounds super loud for a 2021 bow. The post shot “twang” is just too much for my liking. Is something loose maybe?
Congratulations on 100k subs🥳🥳
Question: after the first shot through paper, why not adjust the top hat instead of the rest?
Sorry to tell you Chris but the blue part of the flame is actually the hottest, while the orange/yellow is the coolest. The reason things burn better (cord melting) in the orange part of the flame is due to the volume of the flame. If you look at the volume of blue flame to orange flame, there is substantially more orange flame. This allows more heat to be conducted into the material you are burning. So while your logic is correct that the blue flame will heat the cord slower, its actually because of volume not temperature. Thanks for the great video!
I was waiting on this. Do the v3 27 now!
Hey, Chris whats up !!! do you shoot the hunting class with the V3 ?? new to learning about the bow sports.... wondering witch way i should go getting into the sport.... ???
What's the reasoning for only tying in one nock set, versus two? Thanks.