Thank you for watching, like and commenting! I appreciate it! This will help the development of the channel! 🔴Traxxas Ford Bronco 2021 playlist ruclips.net/p/PLTAysvuQv0cXU1GOINqhAI52oPpMdfuzo 🔴Traxxas TRX-4 Ford Bronco 2021 Upgrades ruclips.net/p/PLTAysvuQv0cXJxJLt5t2S2GnqsQjyW7Lc Hobbywing AXE R2 2800kv amzn.to/3sHHznj
Thank you very much for visiting my channel and taking the time to watch my video. Also, thank you very much for writing to me. Your support really helps the development of the channel. I'm always glad to see you here. See you later!
@@KobtsevRC I have Castle Copperhead 10 and a Holmes Puller Pro V2 3500kv in my TRX-4 Sport. I have geared it down as much as I can and it is a lot smoother than the Hobbywing AXE R2 2800kv in my Element Ecto.
Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!
Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!
tip: I removed the fan from this it's to loud and not needed in a crawler, I have temperature sensor and this esc is never overheated 🤘 Maybe in a a race car this fan have more sense 👍
Thanks my friend for the advice. I thought about that too, it's very loud and makes me nervous. I like to give a little gas, but I think that everything is just an extra fan Thanks!
Super, i waiting my motor for new Bronco, i have already this motor to Defender and TRX6. Also iam looking for yours rims but i cant found, is the most looking good rims i ever see
I can't say which is better because I didn't have an axial scx10 iii Jeep Wrangler. I think both chassis are good. You need to choose the case that you like best.
My fusion pro 2300kv sometimes just shuts off when I drive in high gear (trx6 hauler) When in lowgear there is no issue.. but in high gear it just switches off when I hit the throttle. Sometimes I just drives in high gear nd sometimes it just shuts off. It doesn’t make any sense. Somebody knows the problem?
Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!
Hi buddy 👋 Nice upgrade, I am looking to upgrade my traxxas TRX motor and ECU and wanted to know what kind of speed are you getting in 2 gear with the 2800 KV motor Thanks for sharing this great content.
Thanks a lot my friend for your support. The next video will be about this, but I did not take measurements. I think I'll make an additional video. If everything is calm here.
Does the esc get hot at all? I like my crawlers to be as silent as possible so I’d see if I could run without the esc fan 😈 crawlers stay relatively cool anyways
@@KobtsevRC Thank you for your answer. But the link only show the Xiaomi Mijia and the not the screwdriver that you place on it (the gold screwdriver). Thank you.
This is a cheap Chinese light module. You can find on my channel a video about lighting for Bronco. Thank you very much for visiting my channel and watching my videos!
@@KobtsevRC Thanks, I'll definitely look for that video. Thank you so much for answering all of my questions. I really appreciate it. I've been out of the hobby for nearly 20 years and so much has changed (and some not so much!) - I'm excited about all the potential that exists these days.
Many thanks! I 2800 because I wanted my rig to be able to go slow and at the same time very fast, I guess I guessed right. 3300 I think is also a good option, this motor will be a little more powerful, but I think it will also be quite slow. But in order for it to work at 100%, you need a good trantmitter. Traxsas stock equipment works very poorly
Thank you very much for visiting my channel and taking the time to watch my video. Also, thank you very much for writing to me. Your support really helps the development of the channel. I'm always glad to see you here. See you later!
Any upgrade you put on that lie on wheels is a waste of money. Three TRX-4s have passed through my hands, none lasting more than a month without major failures. So I literally threw them away. Now I have an Absima CR 3.4 Khamba for about a year. I have not replaced a single part, not even a screw. As a crawler it is more capable than the Crapxxas, its center of gravity is better, it has the same functions, it is better built and it already incorporates Hobbywing electronics with 60A ESC, digital servos with metal pinions, steering damper, complete set of lights plus turn signals , full metal adjustable shock absorbers, authentic beadlock wheels (not glued on crappy ones) and a gorgeous Toyota FJ Cruiser body, held in place by magnets and two safety knobs. Best of all, it costs about 100 euros less, being better.
Thank you for watching, like and commenting! I appreciate it! This will help the development of the channel!
🔴Traxxas Ford Bronco 2021 playlist ruclips.net/p/PLTAysvuQv0cXU1GOINqhAI52oPpMdfuzo
🔴Traxxas TRX-4 Ford Bronco 2021 Upgrades ruclips.net/p/PLTAysvuQv0cXJxJLt5t2S2GnqsQjyW7Lc
Hobbywing AXE R2 2800kv amzn.to/3sHHznj
@Mauricio Del Valle thanks bro I try this 🤙
Your video is really detailed and the filming technique is especially good. I should come and learn it often
Thank you very much for visiting my channel and taking the time to watch my video. Also, thank you very much for writing to me. Your support really helps the development of the channel. I'm always glad to see you here. See you later!
It’s always a good day when it says hobby wing on the box
Yes, I love this combo. Soon a new video where I will show its minimum and maximum speed. Thanks for your support, I appreciate it! See you later!
I had that axe system but, I sold it. I bought a Castle Mamba X ESC with a Holmes brushless motor. Night and day performance difference.
Thank you very much! Has it become much smoother? I want to test this too. When everything calms down with us
Do you know if there are any brushless options that allow the use of the traxxas light kit?
@@KobtsevRC I have Castle Copperhead 10 and a Holmes Puller Pro V2 3500kv in my TRX-4 Sport. I have geared it down as much as I can and it is a lot smoother than the Hobbywing AXE R2 2800kv in my Element Ecto.
Another top video
My next up grade, just can’t decide which one of my crawlers will get it first 😀
good choice! Thanks for good words! I'm working on a continuation of this video from the video on the street. Hope it comes out tomorrow!
Hi there my friend. Congratulation on your new upgrade.. you will love more of this bronco after install this powerful motor with foc function. 👍
Many thanks! Yes, it is very slow and very fast at the same time. I'll show you soon)))
@@KobtsevRC can't wait for your next video.. 👍😀
She’s looking fantastic my friend. 😁👍
Thanks 👍I appreciate your support! I'm glad you like it!
Hello brother 👋 🤗
Thank you for sharing this video brother 👍🙏💖
Very nice! The Bronco oscillates very well.
Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!
Amazing rig and incredible slow speed crawling control!
Thanks so much I’m really glad you like it 🇺🇦
Very cool man.
Been thinking of one of these for sure.
Awesome ending haha.
Great tips.
Thank you very much for the good words. I did the setup yesterday and found the optimal settings, I will share later
What a solid soldering :D
)))))))) Yes, I tried)))
You are replacing the motor and ESC with a new one. Performance is expected.👍👍👍
Yes, this is a cool motor in the next video there will be a lot of interesting things.
Alles richtig gemacht ich fahre die Combo auch und bin sehr zufrieden damit
Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!
Awesome video excellent upgrade definitely a big improvement excellent system. Just noticed I have the same tires on my Buffalo
I love this rubber. These are small 2.2 inch wheels and are very soft!
Great how-to video....thanks for sharing
Thanks for watching! I am very glad that my work is not wasted and there are people who like it! Thanks! UA
Awesome combo bro...enjoy. great system😇
Im use hobbywing max 8 combo👑
I'll figure out the settings later and make another video. There will also be a video with a ride on the street
thanks for sharing
Thanks for watching!
tip: I removed the fan from this it's to loud and not needed in a crawler, I have temperature sensor and this esc is never overheated 🤘 Maybe in a a race car this fan have more sense 👍
Thanks my friend for the advice. I thought about that too, it's very loud and makes me nervous. I like to give a little gas, but I think that everything is just an extra fan Thanks!
Tes crawler sont vraiment magnifiques beau job 🤩👍
Thank you very much for your support I appreciate it!
very smooth
Yes, it's really smooth. Thank you for visiting and your comment, it is very important for me and my channel. Thanks!
Super, i waiting my motor for new Bronco, i have already this motor to Defender and TRX6. Also iam looking for yours rims but i cant found, is the most looking good rims i ever see
You can follow this link and find these discs h-techproduct.com/category/wheels/24/
put this setup in my defender such a difference
This set is good, but you need to have good transmitter for it to work at 100%
Hey man awesome video. ? What tools and drill are you using 🙏🏽
In the description! Thanks so much for watching!
Awesome RC and great upgrades
Glad you enjoyed! Thanks for your support! Street riding video coming soon
Should I get the TRX-4 bronco 2021 or the axial scx10 iii Jeep Wrangler
I can't say which is better because I didn't have an axial scx10 iii Jeep Wrangler. I think both chassis are good. You need to choose the case that you like best.
Great video, I would like also install Axe, but I´m not sure if light kit will work with burshless :(
Thanks! Watch the video until the end, there is a fragment where you can see that the headlights work
Hi, Nice work!👍
Thanks for watching I hope you like it 🤘
super upgrade bro 💪👌💯
Thanks 🔥 I'm really glad that I tried not in vain, I appreciate it!
Very nice, thanks
Thank you very much for watching, I am very glad that you liked it and I tried not in vain. Always glad to see you here!
My fusion pro 2300kv sometimes just shuts off when I drive in high gear (trx6 hauler)
When in lowgear there is no issue.. but in high gear it just switches off when I hit the throttle. Sometimes I just drives in high gear nd sometimes it just shuts off. It doesn’t make any sense. Somebody knows the problem?
Hey bro..does the axe 2800kv can go slow mo like fusion pro does??
Like...nice broo...great sharing
Thanks for the visit I appreciate your support, it means a lot to me. Thanks!
Very Nice...Where did you get that graphics kit from?
h-techproduct.com/product/rc-110-traxxas-trx4-bronco-cutting-decal-a-type/132/category/59/display/1/
Can someone explain to me the detailed difference between an ax and a fusion apart from the fact that everything is compact in the fusion? thank you
Hello I love fusion more too. AXE more for fast driving. Fusion better for slow driving. It's my opinion. I don't like a lot wires also.
@@KobtsevRC thanks!
Great video 👍👍
Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!
Hi buddy 👋
Nice upgrade, I am looking to upgrade my traxxas TRX motor and ECU and wanted to know what kind of speed are you getting in 2 gear with the 2800 KV motor
Thanks for sharing this great content.
Thanks a lot my friend for your support. The next video will be about this, but I did not take measurements. I think I'll make an additional video. If everything is calm here.
Thanks my friend 😉
Keep safe 🤜🤛
nice upgrade video
I'm glad you like it
Does the esc get hot at all? I like my crawlers to be as silent as possible so I’d see if I could run without the esc fan 😈 crawlers stay relatively cool anyways
I plan to remove the motor in the future. Many people told me that it is not needed for crawlers.
Hello, Great tutorial. Do you have a link to purchase the screwdriver that you use ? I have the same Xiamo Mijia, its seams to fit nice.
Hey! Thanks for good words! Check out the links in the description below the video! Thanks for your support, I'm glad you liked it!
@@KobtsevRC Thank you for your answer. But the link only show the Xiaomi Mijia and the not the screwdriver that you place on it (the gold screwdriver). Thank you.
@@thorpe85tho Screwdriver with bits amzn.to/3I0FXLw
amzn.to/3HXvQXW I added It's not 100% like mine but similar
@@KobtsevRC thank you
link for the electric screw driver please?
Check out the links in the description! Thanks for the support!
Ola donde puedo conseguir los accesorios decorativos h-tech tengo un bronco como el tuyo y me encanta como lo tienes ,gracia
Thank you very much for your support check the links below the video
Me encanta, que neumaticos son? Se ven muy buenos
Many thanks! Tires check in the description
@5:16 - what is that PCB you are plugging the JST plug into? It looks to be a "bus bar" of sorts or perhaps an extension board?
This is a cheap Chinese light module. You can find on my channel a video about lighting for Bronco. Thank you very much for visiting my channel and watching my videos!
@@KobtsevRC Thanks, I'll definitely look for that video.
Thank you so much for answering all of my questions. I really appreciate it. I've been out of the hobby for nearly 20 years and so much has changed (and some not so much!) - I'm excited about all the potential that exists these days.
Yes, you're right, everything is developing a lot))) I can't imagine that this hobby was 20 years ago))) Then there were wireless control panels?
@@KobtsevRC 20 years ago, we still were using ceramic speed controllers... Yeah... those things got hotter than the sun!
This is cool my friend, this is very interesting
wow~~💯💯💯
Thanks a lot for your support. I am very glad that you like it. I appreciate it!
Can you tell me what wheels those are?
These are wheels from H-Tech Custom Wheels Check the link in the description
@@KobtsevRC great ! Thank you for your help. You put together a beautiful truck, Congratulations
바디가 너무 예쁘네요... 굿굿
Thanks so much for support I’m glad you like it.
👍👍
Thanks so much im really appreciate it!
Any reason why choose 2800kv instead of 3300kv. I am torn between the two. Btw, always enjoyed your bronco videos!
Many thanks! I 2800 because I wanted my rig to be able to go slow and at the same time very fast, I guess I guessed right. 3300 I think is also a good option, this motor will be a little more powerful, but I think it will also be quite slow. But in order for it to work at 100%, you need a good trantmitter. Traxsas stock equipment works very poorly
@@KobtsevRC what's wrong with the stock transmitter?
@@teammoneymikerccarsandtruc3472 Not a smooth trigger, it’s hard to press smoothly.
@@KobtsevRC Oh i thought you meant it would not work with the hobbywing
@@teammoneymikerccarsandtruc3472 It works, but if you have a good remote control, you can move smoother
Nice rig, but the soldering is terrible 😳
Yes it's true! My soldering iron was too weak, soldering was not easy
very awesome my friend..i have rc too at my channel.
Thank you very much for the good words! I'm glad you like it! See you soon.
Dose your have a lift kit i thinking about getting them wheels
No, I don't have a lift kit,but maybe in the future I will install
Very nice..
Thanks a lot
@@KobtsevRC 🙏🙏
Nice👍👍😍
Thank you! Cheers!
I should have never watched this video.🤣🤣
Why?
I kept telling myself that I was going to stay stock for a while, now I see a video on how easy it is to set up and it looks so smooth.
Очень крутой аппарат, жаль что стоит 100к в таком виде)
Да, хороший, но есть и альтернативы
Да, можно начать и с китайской injora за 30к)
Круте оновлення 🔥🔥🔥👍
Дякую радий що сподобалось
💗💗💗💗💗💗
Thank you very much for visiting my channel and taking the time to watch my video. Also, thank you very much for writing to me. Your support really helps the development of the channel. I'm always glad to see you here. See you later!
Where can i buy the rims?😎😍
Hey! Check the link in the description
@@KobtsevRC thank you👍🏼👍🏼
@@TirolChris71 No problem 😉
Der mach das Auto gabut
Wiso das war so Schön 😭😭🤭
Thank you very much for your support! I'm glad you liked it!
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍❤❤❤❤🙏🙏🙏🙏
Thank you very much for your viewing and for your support! I am really satisfied with this brushless system
Any upgrade you put on that lie on wheels is a waste of money. Three TRX-4s have passed through my hands, none lasting more than a month without major failures. So I literally threw them away. Now I have an Absima CR 3.4 Khamba for about a year. I have not replaced a single part, not even a screw. As a crawler it is more capable than the Crapxxas, its center of gravity is better, it has the same functions, it is better built and it already incorporates Hobbywing electronics with 60A ESC, digital servos with metal pinions, steering damper, complete set of lights plus turn signals , full metal adjustable shock absorbers, authentic beadlock wheels (not glued on crappy ones) and a gorgeous Toyota FJ Cruiser body, held in place by magnets and two safety knobs. Best of all, it costs about 100 euros less, being better.
Thank you very much for your comment, I will definitely pay attention to this model and may purchase it in the future! Thanks!