this was a great educational video , I am assigned to a 2017 company Van chevy express 2500 cargo and having same problem , going to follow your teachings and let you know by tomorrow , thanks a bunch mate
great video man, thanks fir sharing. this saved me 279.00 at Chevy. they said i needed new ones. i tried it, and works fine now Chevrolet is in for an ass chewing next.....
FOR THOSE THAT DONT HAVE THE OPTION TRY THIS TURN THE KEY TO THE ON POSITION WITHOUT STARTING THE IGNITION THEN PRESS BOTH THE LOCK AND UNLOCK BOTTON ON YOUR FOB !!
I have a 2018 express having the exact same problem after replacing my tires. trying the info button (second from the top) like you showed , but it never gets to the relearn position. It goes to engine hours , oil life , etc , etc no relearn …
Hope this works on my new to me 2008 grand prix, I had a RR flat and it showed RF tire had no air. Lucky it came with a 5th real wheel. After getting tire flat fixed it showed all is well untill the lr tire was going down and it showed lf tire was low on air. Now I've got that fixed but the dash shows service it
Did not work on my 2021, 2500. I had to press the lock and unlock button on the key fob to engage this test, but did not work. Driver side front tire was the spare. Maybe that’s the reason not sure.
I think i need to install first the driver information center control panel first on my 2012 silverado 1500 cause i bought my truck and it doesn't have those buttons to begin with.
I have a 2023 that rotated the tires. But it just says my rear tires pressure is low on air. Because now the front tires are on the back and shop said it will relearn but it has not. And I don’t have that option that’s says to relearn tire
The auto van shut down, turns the van off before any beep happens. Then back to check system tire monitor error. Then back to right front again. I think it depends on where your van was built, Mexico or Canada.
I tried three times didnt work. The only thing i can think of is that i got new tires in the front but put them in the back so it didnt weae them iut until an alignment and wont register until i switch them back
This is Shorter version for everyone that wants the information without the story.
this was a great educational video , I am assigned to a 2017 company Van chevy express 2500 cargo and having same problem , going to follow your teachings and let you know by tomorrow , thanks a bunch mate
My gosh if everyone taught clearly and to the point like you I could learn anything! Much thanks!
great video man, thanks fir sharing. this saved me 279.00 at Chevy. they said i needed new ones. i tried it, and works fine now Chevrolet is in for an ass chewing next.....
Ok it did take ME a few times but it DOES WORK. 2008 chevy express with NO POWER LOCKS. !! Works just like he explained..thanks
Exelent and very important all your tips. God blase you.from New York
FOR THOSE THAT DONT HAVE THE OPTION TRY THIS TURN THE KEY TO THE ON POSITION WITHOUT STARTING THE IGNITION THEN PRESS BOTH THE LOCK AND UNLOCK BOTTON ON YOUR FOB !!
Thank you. I had that problem and was stuck.
THANK YOU
thank you mate. they were sending me to the dealer to get this "fixed" and to spend millions of dollars. i will give this a try tomorrow.
I have a 2018 express having the exact same problem after replacing my tires. trying the info button (second from the top) like you showed , but it never gets to the relearn position. It goes to engine hours , oil life , etc , etc no relearn …
I just tried it with mine and same thing. We may have to get a relearn tool.
Door must be shut.At least one mine.
Same here, i have a 2018 and the relearn option is not there, i dont know how to get rid of that annoying tire light
Trying to figure this out on 2014. Any updates? Cant find the re learn screen either
My 2014 Yukon Denali has the same error message but when I follow these steps it doesn’t ask to relearn tire position. Do I do something different?
HI question i not see what botton inside you touch when repeat for second tire , please tell me i ytry in my savana 2017 thanks
Awesome ill try this tomorrow. Hopefully the tpms sensors are working to help the cpu read them
It amazes me how you teach! Thank You for all your videos!
Mary Manning
What did you do after the first chirp when you went back into the van did you push another button
Right! WTH he’s not being fully truthful with that . He pushed some button or did something to get it going
Our Chevy Express Van 2019 does not show that information PRESS (check sign) TO RELEARN TIRE
POSITIONS. Am I doing anything wrong?
Would this work by adding air instead of taking it out?
Thanks for the information and your time
Hope this works on my new to me 2008 grand prix, I had a RR flat and it showed RF tire had no air. Lucky it came with a 5th real wheel. After getting tire flat fixed it showed all is well untill the lr tire was going down and it showed lf tire was low on air. Now I've got that fixed but the dash shows service it
I have a 2009 Chevy Silverado but mine don’t have 4 buttons on the left hand side..is there something else I can do to get the light to go off
Will this work on 2015 Chevrolet express 2500?
Does this work for 2018 3500? Because we don’t see that pressure check option
What are you pushing when you go inside your van, because it's not working
Did not work on my 2021, 2500. I had to press the lock and unlock button on the key fob to engage this test, but did not work. Driver side front tire was the spare. Maybe that’s the reason not sure.
Spare tires typically don’t contain a TPMS, meaning any time a spare is put on, it will throw the light and possibly a code.
I think i need to install first the driver information center control panel first on my 2012 silverado 1500 cause i bought my truck and it doesn't have those buttons to begin with.
I have a 2023 that rotated the tires. But it just says my rear tires pressure is low on air. Because now the front tires are on the back and shop said it will relearn but it has not. And I don’t have that option that’s says to relearn tire
The auto van shut down, turns the van off before any beep happens. Then back to check system tire monitor error. Then back to right front again. I think it depends on where your van was built, Mexico or Canada.
im having the same issue, any tips?? please help!
Awesome video.
I tried three times didnt work. The only thing i can think of is that i got new tires in the front but put them in the back so it didnt weae them iut until an alignment and wont register until i switch them back
Why is this so damn hard !
Bruh you just gotta hit 2 buttons and let some air out of the tires
Thanks
thanks, I got mine reset
Is not showing on my end man ! Please please advice 🙏🏼
This will not work on 2012-2024 vehicles but will work for 2011 and older
I've tried to do this several times with my 13 Sierra, and let nearly all of the air out of my tire, the horn never sounded.
Why wouldn’t you give year make model? My 2011 Silverado has exact dash and buttons but no TPMs . It’s strange
@@slimdusty8718 I did
What should i do if one sensor is busted?? How may i end the process???
I got a 2008 Chevy express van I’m able to do this on 3 tires when I get to the last tire it’s unable to learn it 😂
Different menu in my 2015. Didn't work.
Why mine is not beeping???
Didn’t work for our Chevy 2018. We took it to tire shop and they used a tool instead of release air.
Mines still blinking not reading front 2
Pressed" I "button but the reset prompt doesn't come up
Did not work for my 2014 Chevy Express cargo van
Did you ever get it fixed?
@@Masterhalo998 yes
I only see relearn remote
Damn this did not work for me
did you say simple????
Didn’t work for my 15 junkrolet silverjunko
I don’t need another video on how to reset it I need a video on how to delete it any idiot that can’t tell they have a low tire shouldn’t be driving
@@RayTuttle-of5qd thanks for letting me know
Not a mechanic