@@kozmo7 Covid really screwed it up, and things were already hard to get from BHQ with popular knives even pre-covid. I haven't seen BRS balisongs in stock from their website in over a year. I admit I don't check every other day because that would be ridiculous, but when I remember, I check. Nothing in stock for ages. BHQ is still one of the best to buy knives from, even with the low stock. Because if BHQ doesn't have it, no one else will.
Hi Blade HQ! I'm actually from San Jose CA but thx so much for featuring my painting this means alot to me! Definitely gonna keep watching your guys videos thx again and Peace out!👍😎
I do EDC my ultratech dagger and I like having that point to piece anything you may want effortlessly, as well you basically have 2 blades in one hand you can cut up or down and I'd one sides a little dull from use the other sides probably got a little more edge to get the job done. 🥃cheers🍻
Utx-85 is not 85% size of an ultratech (inner douche nerd comes out) Utx-90 would be more accurate overall 8.5x.85=7.225 < 7.5 Utx-85 Blade 3.44x.85=2.924 < 3.125 Utx-85
Range Knife shooting Challenge.......Show us those knives and multi tools that best support our range day activity's while shooting M2 M249 M4 or better yet the black rifle coffee company prius mounted vulcan
Love Microtech. I bought an Ultratech, UTX-85, and a UTX-70 before I even knew what I was doing. I did end up with the hellhound blade on the Ultratech and I absolutely love all three of them. Of course I purchased them all from @BladeHQ Keep rockin boys 🇺🇸🔪💪🏽
I’m late to this video but in regards to the dagger blade. I like them strictly for appearances. I don’t mind them for EDC but it’s not my go to for EDC. I had a dagger edge micro tech and just found sharpening it to be a little annoying trying to line up the bevels perfectly at the tip
I love the fact that Kurt would rather shave 1 leg than touch that beard. Just think how much better the National Knife Day video would have been with smooth legs😂
I carry 2 knives. One dagger for fighting, literally no other use. One for everything else. It was an Ultratech for a few years but i figured the one on my multi tool is good enough. Great knives though
Seems like a nice list, I have about half of those, even a fancy blue custom that was only $1200 tho 😬 ha But all I want to know is do u guys sell that ceramic box cutter??? Because that is the only thing I want now 😮🤯❤
Tammy from the warehouse taught me something new. I did not know tape does not stick to ceramic blades, I will have to invest in one or twelve. Thank you, Tammy.
Looks like that eagle claw patch on the knives has a little registered trademark R next to it. Which is strange. Since that is nothing more than the shoulder patch of the US Army’s 17th Airborne Division that was deactivated after WW2, minus the airborne tab. It’s not just that it’s close, that’s it.
Love dagger blades. You have two edges to use. Comes in handy more than you think. I have the troodon, ultratech and Dirac. All in daggers, all in my edc. But also love my combat troodon with the hellhound in bronze coating and carbon fiber front scale
i live in the stupid UK and cant get any of these.. can barely get a kitchen set, these look amazing though, sad that i;ll probably never know how it feels to open one of these. Dont lose your freedom guys, the UK is a warning.
If it's especially the mechanics you're interested in (more so than the blade itself), there's a Marfione custom microtech otf that has a comb instead of a blade. Maybe you could get that through the customs because it's not a knife really? If you can't find an original, there's even chinese copies of it for far cheaper on sites like DHgate.
My only druther with dual edged daggers if that even in states that allow for the carry and use of OTFs/Autos they have rules against dual edged dagger blades. Iirc, Virginia is like that. I prefer bayonet style blades for that reason.
the way that you said jurassic park pronounces it is what i say, so is day that's the correct pronunciation since it's spelled trOOdon, and not trUUdon
I love dagger blades!! Bought the d rocket Zulu spear and the microtech ultra tech zombie tech from y’all and the microtech blows d rocket out the water! The microtech has never failed me at work like the Zulu spear. But I do need to get another Zulu to see if’s it’s just this one that fails me. Microtech and protech is where it’s at!! Much love from Chattanooga. Ps get more Diracs!!!!
I want a rescue pocket knife challenge to be added to the wheel........use the best rescue knives to cut seat belts break windows and show people how to egress from a vehicle in an emergency......then giveaway the Benchmade 365 OUTLAST and 2 Benchmade 7 Hooks
Why is it so difficult to find a decent butterfly knife!? It's either forced unavailability like BRS knives, or it's Bear & Son gas station quality garbage... Really the only choice is the Benchmade Morpho, because they're the only ones actually production-running butterfly knives. Would be a great thing for a knife company to totally move in on that market... A better balisong, but one that's actually produced, and not just used for Insta-posing and barely exists outside of promo shots.
So Zack explains how the correct pronunciation of Troodon is throw- a- don WHICH IS CORRECT! and then he proceeded pronouncing it True-a-don after that are you serious?
I’ve bought several knives from yall and love the company. Love my combat troodon. But guys that giveaway should’ve been to little Zach. Man he took the time to write and drew up that cool picture. I don’t know him, but is parents are probably not going to buy that knife. Y’all should’ve just sent him it. Would’ve probably made that kids whole year. Just saying is all.
Microtech puts out some incredibly awesome/badass knives. They look really sweet and their quality is the best. Unfortunately, most people (like myself), can't afford to spend that much on a knife.
Yeah they are sweet and pricey, I couldn't help it though and got my first and probably only utx 85 for a Christmas present to myself last week. It's frickin awesome man, although I'm thinking I should have gotten an ultratech because it's pretty small and needs a longer handle
Professional box cutter walks on the set. In her pocket: a utility blade. Do these people not get advanced notice they'll be on the show? Ok, well now I have to go buy a ceramic box cutter somewhere. Where should I go? Does BladeHQ carry those?
Just got my Ultratech from you guys today, love the channel, love the customer service and shipping even more guys. Definitely gonna be skulking around for a Microtech bounty hunter or Rhodesian to pop back into stock.
I wish the Microtech Stitch would have made the list. I love my stitch. The blade shape hits on so many levels. Stout blade stock, super pointy tip and a great grind. And of course it fires like a Microtech.
i was going to sign up for the microtech prize, but the terms seem extreme. they want full access to my youtube account and channel? am i missing something here? btw i enjoy your videos and i got the bug about a month ago and have 5 new additions to my knife family in the few weeks from you. thanks
We all agreed to TRO UH DON and then 5 minutes in he changed it to TROO O DON, even though he claimed to have always pronounced it TROODON lolololkhgfdrunbv
Okay who is the psychic here at HQ? I am literally researching which microtech to buy and the week I start my search, I get a knife banter. Last time, this happened with Kalashnikovs. Something spooky
I just got done playing with all 3 sizes at my local shop and you truly need to put your hands on them to truly make a decision based on your grip and EDC needs, the 85 is the same size as my Kershaw from years past the full size ultratech is not much bigger and is a good size in the hand the 85 again is the same as my EDC of the past 10-15 years and the 70 is the smallest practical EDC I'd consider it is very small in the hand but has a very comfortable feel and is easy choked up on wen out and all but completely disappears in the pocket and yes I tried all of them in the pocket just to get a feel for what will be my new EDC for the rest of it's/ my life... I think I'm going full size and then 70 latter on and skipping the 85 simply because the 70 and it's full size module are exact clones in a 70% scale where the 85 had a slightly different screw layout and I'm just that OCD 😉😉 good luck to anyone in the market and I really hope you can find a local dealer to have that hands on feel you really need to appreciat what your hand and pocket are really going to want after all it's a large investment in a knife especially if your like me and spend less then $100 average ever 5-15 years as you lose one or brake it lol 🥃cheers🍻
Purchased FOUR new UTX-70s….. The misfire probably 25 to 30% of the time at a minimum! I have to grab the blade, advance it and lock it in. Not so sure how great these things are planning on returning them ASAP
I am from the Netherlands.... I have Microtech knives in my collection, 2006/2007, you guys from BladeHQ, you couldn't get an erection at that time at that age....so please, please, please, show some respect!
Anybody have trouble carrying the UTX-80 in pocket? The Ultratech does seem a bit large. Never carried anything but the average folder. The UTX-70 honestly seems a bit small but they make it seem like the others are a bit large for the pocket. Also considering the Dirac Dagger witch seems to be right in the middle ground. Thoughts? Would like some experienced feedback before dropping so much cash on a knife.
Honestly, can you use an OTF for EDC????? I have an Infidel that i must have purchased over 10 years ago and it just sits in my collection unused, like most of my knifes. Sad but true, i think using them will ruin the collection and value.
250 300 600 for Knives look at what they are where are you coming up with that kind of money All it is is Springs Aluminum and a small blade Wow I just can't wrap my head around itWho pays that kind of money is this a rich man's toy WTF It's not a bushcraft knife take them camping put them through what a bushcraft knife goes through they would break easily Another WTF
Omg.I would buy one .But i live in Germany and here is the possession punishable.Its so damn stupid.Weapon Law Knives 42 a .Dumb s#%*.But Nice Video as always even the Shaving.🤙
Ask me, I would never pay 400+USD for such ugly knives, no matter how solid, rugged, heavy duty they can be. Microtech Oscar for the most ugly design in the knife industry.
Microtech UTX-70..AKA “The Wrong Juul”
😂
😂
New task for the wheel:
Make a music with knife clicking (like that Nike basketball commercial). That'd be rad. 😊
This !
Dagger, fastest blade for sloppy random cuts, just keep the knife moving and it's cutting. Tight spaces, just stick in and 360 cuts possible.
Ok, i am dieing here. This episode made me laugh so hard😆😆😆😆😆
I bought the dagger blade. I am still very cautious but its all they had at the Ace hardware.
Shoutout Jaime the camera man
Thanks bladehq for the sweet sweet content and most definitely for the giveaway!
13:38 that's what she said!
Wheel of misfortune should have open soup can with blade
Nice Davie504 clips XD
AND THE JACKSFILMS?! That’s amazing. Good job, editor. Nicely jobbed.
"This is the LUDT, we have a bunch of different variations in stock on the wbsite"
Ahhh, those were the days...
I feel like literally nothing is in stock anymore
@@kozmo7
Covid really screwed it up, and things were already hard to get from BHQ with popular knives even pre-covid. I haven't seen BRS balisongs in stock from their website in over a year. I admit I don't check every other day because that would be ridiculous, but when I remember, I check. Nothing in stock for ages.
BHQ is still one of the best to buy knives from, even with the low stock. Because if BHQ doesn't have it, no one else will.
@@P.W.R.
Thank you friend. I will keep hunting the good hunt!
*me still watching knowing damn well I'll never be able to afford a Microtech*
me watching knowing damn well I could never legally own a microtech
@Nishan so sorry for you :(
I was just about to say that
Same bro
California sucks I can only carry Kershaw flippers
Since it landed on "shave again" I think my boy with the Christmas Hams needs a sweet handle bar mustache.
We may have already scared him for life. 🤣
@@BladeHQ scarred** 😁😁😁
@@OsamaBinDarrel hahahahahahaha 😐😐😐😐😐
"so yeah we're calling it The trow-uh-don"
3 seconds later
"So the true-don"
4 seconds later
"Yeah the true-uh-don"
yeah, first he says "we did some research and it's actally trow-a-don" then he incorrectly corrects the other guy and says "true-a-don". Derp.
It's correct pronunciation is trow-a-don (like the dinosaur)
So Kurt's a cyclist now
Riding into all of our hearts full speed!
@Doran J, swimmers 🏊 shave their legs too.
@@steveo6685 Protech SNG Operator?
@@steveo6685 assuming that’s the one you were looking for?
@@steveo6685 all of the Protech operator knives do I believe
For the wheel: Prepare a Halloween Pumpkin using a Victorinox classic.
Win an Ultratech here: gleam.io/mvqc9/win-a-microtech-ultratech
Ahh... thought I was missing it.
As a bearded guy, I’ve never been so happy to watch another man shave his leg 😂
Think you guys should put davie504 channel in the description for using his clip
Was looking for this comment😂
Shut up bro
I thought I miss clicked on one of his vids and was like huh?
Hahahah that is funny as hell. The leg shave
What's up slappers
Just got my first microtech. UTX-85 and I love it
Here’s the thing… Kurt is getting a thumbs down for having that image burned into my brain. I was close to reporting this video…… yikes. Lol
17:50 I thought they were going to give one to him, but they just told his mom to get him one. Stingy bastards 😂
Dagger blades are great for cutting tape on boxes and opening packages. You simply don't have to change your blade direction when cutting a box open.
Why no love for the Exocet? ... It is constantly in my pocket.
It's a great one just not in the best of the best yet because it is so new. We bet by next year it will already be a classic.
I have one on its way
Not gonna lie, the leg shaving was a little scary and he got a little too into that. 😬
Dude.
Seriously.... yuck
😶 ya
you guys didn't chub out? no boners? what're you, gay?
Hi Blade HQ! I'm actually from San Jose CA but thx so much for featuring my painting this means alot to me! Definitely gonna keep watching your guys videos thx again and Peace out!👍😎
Obviously this should be on the wheel: Halloween pumpkin carving
Wheel of indecision: eat soup with a knife
whisper into asshole
LMAOOO
I do EDC my ultratech dagger and I like having that point to piece anything you may want effortlessly, as well you basically have 2 blades in one hand you can cut up or down and I'd one sides a little dull from use the other sides probably got a little more edge to get the job done.
🥃cheers🍻
Wow really amazing looking MicroTech knifes reviews video ever 10out10!!! :D
And I just hit 591Subs!!! ^w^
Utx-85 is not 85% size of an ultratech
(inner douche nerd comes out)
Utx-90 would be more accurate
overall 8.5x.85=7.225 < 7.5 Utx-85
Blade 3.44x.85=2.924 < 3.125 Utx-85
Range Knife shooting Challenge.......Show us those knives and multi tools that best support our range day activity's while shooting M2 M249 M4 or better yet the black rifle coffee company prius mounted vulcan
Love Microtech. I bought an Ultratech, UTX-85, and a UTX-70 before I even knew what I was doing. I did end up with the hellhound blade on the Ultratech and I absolutely love all three of them. Of course I purchased them all from @BladeHQ Keep rockin boys 🇺🇸🔪💪🏽
Just got got my first microtech ultratech te and I'm thinking about doing the same as u now.
You guys and gals are the absolute best in the industry. Thank you for all you do Blade HQ.
Add “fruit ninja” to The Wheel of indecision
First.
Damn.
There are 3 firsts
@@WombatEater But I was the most firstest.
I don't see the link in the description. How do we enter?
you uploaded the video, obviously you're the first
I’m late to this video but in regards to the dagger blade. I like them strictly for appearances. I don’t mind them for EDC but it’s not my go to for EDC. I had a dagger edge micro tech and just found sharpening it to be a little annoying trying to line up the bevels perfectly at the tip
I love the fact that Kurt would rather shave 1 leg than touch that beard. Just think how much better the National Knife Day video would have been with smooth legs😂
Lee Graven lol
I carry 2 knives. One dagger for fighting, literally no other use. One for everything else. It was an Ultratech for a few years but i figured the one on my multi tool is good enough. Great knives though
Damn.... have you poked something yet?
Lol, poor Kurt, you can definitely see those cuts on his leg right when he's finished.
Seems like a nice list, I have about half of those, even a fancy blue custom that was only $1200 tho 😬 ha But all I want to know is do u guys sell that ceramic box cutter??? Because that is the only thing I want now 😮🤯❤
Tammy from the warehouse taught me something new. I did not know tape does not stick to ceramic blades, I will have to invest in one or twelve. Thank you, Tammy.
I love you videos!!!! Just wanted to say yall are doing awesome. 😁
Kurt, the Smoothest Viking of the North! Greetings from the Dutch Viking!!
Wheel of Indecision: Throw that UTX at a wooden target and make is stick!
And then Tammy shows up and puts everyone to shame with her knife that's...actually practical.
Looks like that eagle claw patch on the knives has a little registered trademark R next to it. Which is strange. Since that is nothing more than the shoulder patch of the US Army’s 17th Airborne Division that was deactivated after WW2, minus the airborne tab. It’s not just that it’s close, that’s it.
Love dagger blades. You have two edges to use. Comes in handy more than you think. I have the troodon, ultratech and Dirac. All in daggers, all in my edc. But also love my combat troodon with the hellhound in bronze coating and carbon fiber front scale
i live in the stupid UK and cant get any of these.. can barely get a kitchen set, these look amazing though, sad that i;ll probably never know how it feels to open one of these. Dont lose your freedom guys, the UK is a warning.
If it's especially the mechanics you're interested in (more so than the blade itself), there's a Marfione custom microtech otf that has a comb instead of a blade. Maybe you could get that through the customs because it's not a knife really? If you can't find an original, there's even chinese copies of it for far cheaper on sites like DHgate.
I love a dagger blade, it’s the same price as a single edge, so you get twice the cutting edge for the same price. It’s more value.
Looks less unique& cyber tho
My only druther with dual edged daggers if that even in states that allow for the carry and use of OTFs/Autos they have rules against dual edged dagger blades. Iirc, Virginia is like that. I prefer bayonet style blades for that reason.
My next knife is def going to be a ultratech with a dagger blade. So sexy
love my ben blue tanto ultratech.
the way that you said jurassic park pronounces it is what i say, so is day that's the correct pronunciation since it's spelled trOOdon, and not trUUdon
I miss my microtech.. i traded it for a lower price on a handgun lol
Waa the gun a hi point
@@nocturneraider glock 45 actually
@@tuckerrichardson2606 good because if it was a hi point you got screwed
@@nocturneraider oh not at all lol
You didn't deserve it then. Good trade.
I love dagger blades!! Bought the d rocket Zulu spear and the microtech ultra tech zombie tech from y’all and the microtech blows d rocket out the water! The microtech has never failed me at work like the Zulu spear. But I do need to get another Zulu to see if’s it’s just this one that fails me. Microtech and protech is where it’s at!! Much love from Chattanooga. Ps get more Diracs!!!!
For the wheel: Gut a fish
Dagger blades are not legal in California. Drop points are legal. As are tanto.
Never saw the "Kurt's gonna shave his leg on camera" coming.... not sure I can recover from this one......
@Blade HQ y’all should do a knife banter on different balisongs (butterfly knives).
I've only ever carried my Halo VI as part of my wedding attire because I needed something classy to go with the classy tux
I think you're full of shit and don't even own a tux
@@Blazerghost sounds like someone's jelly
@@Excalibur01 Yeah totally lol. I have 5k in knives.
@@Blazerghost good for you.
@@Excalibur01 It is.
DO A VIDEO ON DAGGERS OR BOOT KNIVES :)
I want a rescue pocket knife challenge to be added to the wheel........use the best rescue knives to cut seat belts break windows and show people how to egress from a vehicle in an emergency......then giveaway the Benchmade 365 OUTLAST and 2 Benchmade 7 Hooks
Why is it so difficult to find a decent butterfly knife!?
It's either forced unavailability like BRS knives, or it's Bear & Son gas station quality garbage... Really the only choice is the Benchmade Morpho, because they're the only ones actually production-running butterfly knives.
Would be a great thing for a knife company to totally move in on that market... A better balisong, but one that's actually produced, and not just used for Insta-posing and barely exists outside of promo shots.
So Zack explains how the correct pronunciation of Troodon is throw- a- don WHICH IS CORRECT! and then he proceeded pronouncing it True-a-don after that are you serious?
I’ve bought several knives from yall and love the company. Love my combat troodon. But guys that giveaway should’ve been to little Zach. Man he took the time to write and drew up that cool picture. I don’t know him, but is parents are probably not going to buy that knife. Y’all should’ve just sent him it. Would’ve probably made that kids whole year. Just saying is all.
Talks about how Troodon is pronounced.... Continues to pronounce it incorrectly immediately after.
I just couldn't change my old ways 🤣-Zac
Microtech puts out some incredibly awesome/badass knives. They look really sweet and their quality is the best. Unfortunately, most people (like myself), can't afford to spend that much on a knife.
Yeah they are sweet and pricey, I couldn't help it though and got my first and probably only utx 85 for a Christmas present to myself last week. It's frickin awesome man, although I'm thinking I should have gotten an ultratech because it's pretty small and needs a longer handle
Says the guy with 10 Benchmades and 20 Spydercos
Professional box cutter walks on the set. In her pocket: a utility blade. Do these people not get advanced notice they'll be on the show? Ok, well now I have to go buy a ceramic box cutter somewhere. Where should I go? Does BladeHQ carry those?
There are some things in life you can't unsee no matter how hard you try. Kurt with his leg up on the sink shaving is now on that list. So disturbing.
I use my Combat Troodon as a box cutter at work lol
Do a video on best swiss army knives to disarm a bomb with
Just got my Ultratech from you guys today, love the channel, love the customer service and shipping even more guys. Definitely gonna be skulking around for a Microtech bounty hunter or Rhodesian to pop back into stock.
I wish the Microtech Stitch would have made the list. I love my stitch. The blade shape hits on so many levels. Stout blade stock, super pointy tip and a great grind. And of course it fires like a Microtech.
i was going to sign up for the microtech prize, but the terms seem extreme. they want full access to my youtube account and channel? am i missing something here? btw i enjoy your videos and i got the bug about a month ago and have 5 new additions to my knife family in the few weeks from you. thanks
Is it just me or is kurt’s leg bleeding really bad at 8:01
You should give Curt a raise for shaving his legs in camera! A BIG raise!
ughhh that hellhound blade style is so unfortunate
perhaps Microtech Ultratech is the best OTF
As a fellow big bearded dude, Kurt's shaving segment had me laughing so hard. Keep up the good work.
Kurt you are awesome.....Grave before shave for the beard Zac let it grow let it grow especially because no shave November is coming up
We all agreed to TRO UH DON and then 5 minutes in he changed it to TROO O DON, even though he claimed to have always pronounced it TROODON lolololkhgfdrunbv
Kurt 30 day edc of UTX 70 episode
Okay who is the psychic here at HQ? I am literally researching which microtech to buy and the week I start my search, I get a knife banter. Last time, this happened with Kalashnikovs. Something spooky
We aim to please😉😁
You guys are the best show on you tube period! 🔥🔥🔥
we stan zac from bhq
I just got done playing with all 3 sizes at my local shop and you truly need to put your hands on them to truly make a decision based on your grip and EDC needs, the 85 is the same size as my Kershaw from years past the full size ultratech is not much bigger and is a good size in the hand the 85 again is the same as my EDC of the past 10-15 years and the 70 is the smallest practical EDC I'd consider it is very small in the hand but has a very comfortable feel and is easy choked up on wen out and all but completely disappears in the pocket and yes I tried all of them in the pocket just to get a feel for what will be my new EDC for the rest of it's/ my life... I think I'm going full size and then 70 latter on and skipping the 85 simply because the 70 and it's full size module are exact clones in a 70% scale where the 85 had a slightly different screw layout and I'm just that OCD 😉😉 good luck to anyone in the market and I really hope you can find a local dealer to have that hands on feel you really need to appreciat what your hand and pocket are really going to want after all it's a large investment in a knife especially if your like me and spend less then $100 average ever 5-15 years as you lose one or brake it lol
🥃cheers🍻
Please tell me that Kurt earned a Mermaid!
Where’s one get a ceramic box cutter?
Purchased FOUR new UTX-70s….. The misfire probably 25 to 30% of the time at a minimum! I have to grab the blade, advance it and lock it in. Not so sure how great these things are planning on returning them ASAP
I am from the Netherlands.... I have Microtech knives in my collection, 2006/2007, you guys from BladeHQ, you couldn't get an erection at that time at that age....so please, please, please, show some respect!
@BladeHQ give me a free Combat Troodon Hell hound and I'll come to BHQ and shave my 5 year old beard with it for Knife Banter :)
I got the exact same knife that he shave with , well someone give it to me as a birthday gift, I didn't know it was a top end knife
Anybody have trouble carrying the UTX-80 in pocket? The Ultratech does seem a bit large. Never carried anything but the average folder. The UTX-70 honestly seems a bit small but they make it seem like the others are a bit large for the pocket. Also considering the Dirac Dagger witch seems to be right in the middle ground. Thoughts? Would like some experienced feedback before dropping so much cash on a knife.
I have a Microtech LUDT Automatic Knife Tan (3.4" Stonewash) and I love it! The quality of the knife is just awesome.
Honestly, can you use an OTF for EDC?????
I have an Infidel that i must have purchased over 10 years ago and it just sits in my collection unused, like most of my knifes. Sad but true, i think using them will ruin the collection and value.
250 300 600 for Knives look at what they are where are you coming up with that kind of money All it is is Springs Aluminum and a small blade Wow I just can't wrap my head around itWho pays that kind of money is this a rich man's toy WTF It's not a bushcraft knife take them camping put them through what a bushcraft knife goes through they would break easily Another WTF
Omg.I would buy one .But i live in Germany and here is the possession punishable.Its so damn stupid.Weapon Law Knives 42 a .Dumb s#%*.But Nice Video as always even the Shaving.🤙
Ask me, I would never pay 400+USD for such ugly knives, no matter how solid, rugged, heavy duty they can be. Microtech Oscar for the most ugly design in the knife industry.
The noise he made when he looked at the hair on the blade 😂
I love BHQ, i haven’t received any stickers as of late 😢.
Just bought a warhound ultratech I cannot wait til the end of the week for it.