Fantastic work as always Eric. Thanks again for the awesome job you guys did at my place. You are a very talented roofer who makes sure his work is well done...and it shows. I can see it everyday when I pull up to my house.
Hey Eric I've been a roofer for 15 years I've had a license for two years, I love watching your videos Man seem to learn something all the time from you thanks brother keep up the good work.
That's how you do a Presidential shingle roof install! Good job. I just came from "the worst roofing in history", where another crew just screwed up a huge presidential roof job!
ive been roofing for a while up here in NW PA, and i have never seen these!...these things look AWESOME! I wanna see if they are even available in my area! liked and subbed!
These are one of the most popular shingles by far very common on upper middle class houses and a lot of HOAs require designer shingles instead of arch for the curb appeal, I see it a lot in HOAs where the roofs were all originally cedar shake or tile. That being said I'm located in Salem, OR so I can't speak on the popularity everywhere outside of Oregon.
Not to poop on your work that is excellent, with a lot of attention to detail. These shingles look awesome. and likely are one of the best on the market, until you see the clay tile roof next door and... that is how a roof should look like. Never mind how well these shingles are installed, they will always look like they are printed on a sheet of paper and sticked to the roof.
Francisco Ruiz-Lugo..I'm a roofer sir, it would be useless to carry a camera along when i don't even have time to record anything, i only record probably, 1 minute per day if I have time. I put my customers first, rather than getting famous online. this videos ara aimed to installers that already have some knowledge about how to install shingles. thanks for watching !!
Si senior. Pero la quality of the videos would improve, and you'd be displaying quality roofing in your videos. Not only to the world, but to your customers. Okay wey gracias la videos.
I got your point ! but like a said before , not trying to get famous online , just posting some few tricks for the rest of installers that need new ideas, that's my way of thinking , my customers don't know that I upload videos online , I don't even mention it to them. I get tons of companies trying to partnership with my channel , I reject all that , I don't need to do it , I make enough money doing what I do. I don't even knock on doors anymore since 8 years ago. This videos are aimed to the new installers so they can get better when they delivering a new installation. I really appreciate the time you take to watch my videos ! I really appreciate your comments , it gives me new ideas and helps to keep going , I was going to close my channel last years. I'm too busy doing my roofs that , the time I have for new videos is limited. but thanks to viewers like you ! I'm here ! Thank you !! Eric Garcia .
You are not installing your pipe flashings properly. First the flashing is too high on the course of shingles you lay the flashing on. You should have laid one more row of shingles, you are giving water more opportunity to divert sideways. Also per the Master Applicator spec, you should be applying Winterguard around the flashing. I know you are trying to hide all the flashing metal, but not at the cost of doing it wrong and it not being watertight in wind driven rain. Specifically: The flashing should go to or over the line of the pumpkin tooth pattern.
Primo no quieras impresionar con los pedazos de stater en el solartube lo mas importante es que le cortes las esquinas de arriba a los shingles por que de otra forma se va a meter el agua. No des consejos si no sabes mejor sigue aprendiendo
Fantastic work as always Eric. Thanks again for the awesome job you guys did at my place. You are a very talented roofer who makes sure his work is well done...and it shows. I can see it everyday when I pull up to my house.
Hey Eric I've been a roofer for 15 years I've had a license for two years, I love watching your videos Man seem to learn something all the time from you thanks brother keep up the good work.
i think we missed the starter on the vent like the pipes. keep up the good work man! more vids plz
Back again to learn for the new job coming up thanks erick
Beautiful straight lines!
That's how you do a Presidential shingle roof install! Good job. I just came from "the worst roofing in history", where another crew just screwed up a huge presidential roof job!
Beautiful Job!
Good work my guy I’m a roofer in Florida shit looks awesome
Nice job Eric!!!
5,5,15 step pattern. love the presidentials
Gracias por tus videos, quiero empezar mi propio camino en el roof y aprendo mucho de ti,gracias, Dios te bendiga..
Whats the name of that brand you like? Awesome work.
Mizer * ....thanks, presidential shakes
ive been roofing for a while up here in NW PA, and i have never seen these!...these things look AWESOME! I wanna see if they are even available in my area! liked and subbed!
These have been around longer than you’ve been roofing, broaden your horizons
These are one of the most popular shingles by far very common on upper middle class houses and a lot of HOAs require designer shingles instead of arch for the curb appeal, I see it a lot in HOAs where the roofs were all originally cedar shake or tile. That being said I'm located in Salem, OR so I can't speak on the popularity everywhere outside of Oregon.
Those are called dummy shingles here. We tar tab them or they will blow away. Great way to improve quality. Good work.
You always need intake venting at the gutter edge. You can't put ridge vent over gable vents
What is the pattern on the Gaf grand Sequoia?
Cómo se marca este tipo teja para salir derecho en un vale , gracias
Hi there! Do you do work in Simi Valley Ca. I’d like to get a quote to do that presidential roof
Email me your address and I'll look into it
Don't nail the starter then the shingle around the flashing. Nail them both once through th shingle. Cut back the tops too
Como cobra la squadra quitar y poner shingle presidencial
Not to poop on your work that is excellent, with a lot of attention to detail.
These shingles look awesome. and likely are one of the best on the market, until you see the clay tile roof next door and... that is how a roof should look like.
Never mind how well these shingles are installed, they will always look like they are printed on a sheet of paper and sticked to the roof.
Como es la medida de esta teja para echar línea?
Chido primo ya tengo un año de roofero y aqui en Seattle wa esta cabron siempre llueve y neva quiero regresarme a California
Tu need to get a go gear head camera don. It would let you use both hands!
Francisco Ruiz-Lugo..I'm a roofer sir, it would be useless to carry a camera along when i don't even have time to record anything, i only record probably, 1 minute per day if I have time. I put my customers first, rather than getting famous online. this videos ara aimed to installers that already have some knowledge about how to install shingles.
thanks for watching !!
Si senior. Pero la quality of the videos would improve, and you'd be displaying quality roofing in your videos. Not only to the world, but to your customers. Okay wey gracias la videos.
I got your point ! but like a said before , not trying to get famous online , just posting some few tricks for the rest of installers that need new ideas, that's my way of thinking , my customers don't know that I upload videos online , I don't even mention it to them.
I get tons of companies trying to partnership with my channel , I reject all that , I don't need to do it , I make enough money doing what I do.
I don't even knock on doors anymore since 8 years ago.
This videos are aimed to the new installers so they can get better when they delivering a new installation.
I really appreciate the time you take to watch my videos ! I really appreciate your comments , it gives me new ideas and helps to keep going , I was going to close my channel last years.
I'm too busy doing my roofs that , the time I have for new videos is limited.
but thanks to viewers like you ! I'm here !
Thank you !!
Eric Garcia .
You said you wanna be famous one day! Y ahora dices que no. Who the fuck te entiende😂😂😂
You are not installing your pipe flashings properly. First the flashing is too high on the course of shingles you lay the flashing on. You should have laid one more row of shingles, you are giving water more opportunity to divert sideways. Also per the Master Applicator spec, you should be applying Winterguard around the flashing. I know you are trying to hide all the flashing metal, but not at the cost of doing it wrong and it not being watertight in wind driven rain. Specifically: The flashing should go to or over the line of the pumpkin tooth pattern.
Expensive Shingles!
This is flat lander style of waterproofing. Is not coastal by any means!!
Go pro would be nice
Primo no quieras impresionar con los pedazos de stater en el solartube lo mas importante es que le cortes las esquinas de arriba a los shingles por que de otra forma se va a meter el agua. No des consejos si no sabes mejor sigue aprendiendo
Yall need to learn how to lap your flashing under the paper.
0:54 ese felt esta mal primo la agua se mete por el ridge entre unos años I despues se mete abajo por el papel
Those are one of the worst shingles to lay. They take forever and they're extremely heavy.
Get go pro!
Should of used malarkey windsor. A much superior shingle and better looking. 💯