Thanks for sharing ma, please ma 5litres of water = 1kg of caustic soda, then 6litres of oil , please ma for the measurements of sulphic acid, what is half of half? I want to start bar soap business. Thank you ma
I used just bleached palm oil for this production, all measurements r in the description box. After mixing your caustic solution in your oil, and you soap gets to trace, you add your sulphonic Acid last before pouring it into your mold
Please l want to Start my soap making business, and l only know of caustic soda,oil and water but l want to make it nice and sell it , how will l go about it please help me
You can buy cheaper oils like tallow and mix it up with palm oil and use fillers like calcium carbonate and soda ash to increase the volume of ur soap for more profits
Thank you so much madam but please help me I have lye solution already if I want to use 1 liter of it how many litres of oils will i used please. May God richly bless you ❤🙏
@@nhyirabakiki724-i3p you are suppose to mix your soap well. Sides, middle, stir well under your soap looks creamy n thick. So just try it again but in a little quantity and right measurements so that u don get a batch.
Any oil can be used but for commercial purposes olive is rather expensive, if u can pay your hands on palm kennel oil or beef tallow, it will be preferable
@@SAFIYADANTANISURU you have two ways : chemical way is by using hydrogen peroxide n sulphonic acid on in 1%. ( 10 mls for every one liter of oil) your first put sulphonic acid mix will for about 5minutes before u add you hydrogen peroxide.Let it rest for about 20hours before use. Or u can use firewood put ur oil in the pot n let it cook until u can send a white paper inside n it comes out clear.
I did semi hot process, so my lye was mix same time n immediately after my bleached palm oil was added in its semi solid state. I did add any color to my oils.
Please l also want to start my own soap business and l need help from you, l know the basic ingredients are caustic soda oil and water but when you're doing it for business what should l add is my problem now
@@bettyabudu4664 for me, I add just my sulphonic Acid or foaming booster, just to enhance the cleaning properties of my soaps and I make a decent profit. But if u want extra profit for soap making u can use fillers like sodium carbonate and is shouldn’t exceed 30%( meaning if u are using 10liters of oil, your sodium carbonate should be 20-30% of sodium carbonate. It helps increase the volume soap and weight.
Nothing will spoil dear, sulphonic is just to boost the cleansing and foaming power, but with just you palm oil or palm kennel oil, your soap will still later well.
This particular recipe I use 100% bleached palm oil. But I also use Tallow and palm oil for other soaps, but I make sure I add a foam booster like sulphonic acid
@@renongrum671 Water:5liters Caustic Soda-1kg 6liters bleached palm oil 1/4 liter sulphonic acid.(1/2 of half a liter) For those who don’t have scale: 1 cup of Caustic soda = 4cups of water Oil 5cups oil. Now u can multiply this to any quantity you want.
I gave dear, 5 liters of water =1kg of Caustic Soda and 6 liters of oil. Sulphonic acid is 1/2 of half liters If I don’t have a scale, one cup of caustic soda - 4 cups of water. 2 cups of Caustic soda equals 3cups of water
Thanks for sharing I love your simplicity.
Thank u n thanks for watching
Thanks for the training, God bless you abundantly. Amen
Thank you fir stopping by and watching 🙏🏽🙏🏽
Thanks for the sharing ma am learning a lot from it ❤watching from Gambia
Wow from Gambia? Thanks for watching and I am happy to always share
Thanks madam.. this is just exactly how I cut my soap....
Thank you sharing
Thanks for watching
Thank you for share your knolowge comgratuletion from Nicaragua centro america
Thanks for watching and supporting my channel
Thanks for sharing, this is as simple as short!
Thank you so much for this wonderful video. your kind and respectful manner has earned you a new subscriber. I like your respectful way of talking
Thank you so much,l will try it madam
Measurements for the sulphuric acid, please.I like your videos
Thank you, sulphonic Acid 1/4 cup
Thank you very much
Here to support you bestie from kenya.
Thanks for the support Besties 👯♀️
Tanx so much ma
God bless ur hand work🙏
Thank you for the recipe pls do u experience shrinkage after the soap has dried
Not really, because my measurements r accurate n I don’t use additional fillers
❤😂 great work thanks
Yes it's very clear thnk you
Thank dear
Thank u for stopping by 😘😘
Plz the explanation of mixing the oil with sulphonic acid is not clear ma, but you did well. More explanation plz
Thank you so much.
Please, do start making it immediately, you finished dissolving the coustic soda?
Yes because my oil was not worn and needed my caustic to melt my oil
Please can i use lard for this recipe
Yes u can
And ma do you have any cosmetology shop in Uyo, Akwa Ibom State, you can recommend to me. I want to go for physical training. Thank you
I am in Cameroon dear
Ma what are those things u do inside d bucket pls explane
I love it
Thanks for watching my dear
Please dear
What's the measurement of that sulphonic acid?
Or is it as desired?
I used 1/4 liter for this 5liters of water production
Can you use soda ash and caustic soda at once
I prefer to dissolve them separately and add simultaneously
Thanks for sharing ma, please ma 5litres of water = 1kg of caustic soda, then 6litres of oil , please ma for the measurements of sulphic acid, what is half of half? I want to start bar soap business. Thank you ma
1/2 of 1/2 is a quater( 1/4) and if you are using palm kennel oil, it will be best .
Thank you so much ma
Thanks so much my first time of watching it
Well done madam
Thank you 😊
Thanks for the video you share with us but is it long last soap bars
This particular one doesn’t really last that long, because there are setting additives we didn’t add to it.
Please ma how did you mix your oil and the sulphonic acid
I used just bleached palm oil for this production, all measurements r in the description box. After mixing your caustic solution in your oil, and you soap gets to trace, you add your sulphonic Acid last before pouring it into your mold
❤❤❤
Please l want to Start my soap making business, and l only know of caustic soda,oil and water but l want to make it nice and sell it , how will l go about it please help me
Pls what is the measurement of your mould
Thanks for the receipe. You put something in the oil ? Thé color....
No I didn’t, it’s that way because it was in its semi solid state.
Thank you God bless you
What is that thing u poured inside the caustic soda solution and how did u mix it? Thank u
Thank for you , in which state with found ingredients to
making soap
Why is your sulphuric acid tick, did you add it anything before adding it to the soda solution?
Mind is sulphonic acid not sulphuric acid. The two are different kind of acids, plus mind is undiluted
Thanks, mam ,I love it.
Exactly @@HelenMbone
Thank you
Did you consider cost of production
because palm oil is 5000+
Caustic soda and Sulphuric
For this production in my county, the palm oil for this cost 2k soda 1k sulphonic 500 . So 6300 - 3500
You can buy cheaper oils like tallow and mix it up with palm oil and use fillers like calcium carbonate and soda ash to increase the volume of ur soap for more profits
What is the name of your country
@@kudiratyusuff8642 Cameroon 🇨🇲
What is the measurements of your mould
If i want to add calcium or sulphate or soda ash, what quantity will i add bc i want to try it out
Any oil of your choice 200g
Calcium cabornate 20g that 20% of 200gms oil
35.6 grams caustic soda
Water 81g
Soda ash 10 g
Silicate 35g
Foam booster 10g
No caustic ma
@@JanetBanigo I’m sorry for the typo error, I have corrected it
Tnx maa
Tell me the measurements I can use to make bar soap of one kg
You want to make soap with one kilo of lye or just soap that weighs just one Kg???
Beautiful God bless you but please the oil measurements wasn't clear to me please
My oil was 6 liters
Caustic 1kilo for 5liters of water
I'm a new subscriber, thank you,i want to ask if i can add sls to my production and i thought using only palm oil will not make the soap lather well
Your soap will lather perfectly well even without putting any foam booster. And yes I can add in SLS to boost the lathering of your soap
Hello, which oil os the best to use?
Palm kennel oil, Palm oil and tallow for laundry bar soaps
Thank you mem.From India.
Thank you so much madam but please help me I have lye solution already if I want to use 1 liter of it how many litres of oils will i used please. May God richly bless you ❤🙏
1liter of lye solution = 2liters of oil
Thank you so much madam but I did it and there was something like water under the soap please what can I do to resolve it please 🙏
@@nhyirabakiki724-i3p you are suppose to mix your soap well. Sides, middle, stir well under your soap looks creamy n thick. So just try it again but in a little quantity and right measurements so that u don get a batch.
Thank you very much my dear ♥️
Please what's the name of that oil you used?
Palm oil and I bleached it
Is this measurements possible without hydrometer,?
Ma pls what did u add to the oil first before the caustic the is thick and brown pls what did u add
My oil is bleached and it was in its semi sold state hence the color, I did not add anything to my oil before adding the caustic soda.
Hello, well done! What about herbal/organic soap? Thank you
How much sulphonic acid needed for five litters of water for costic soda is clear
1/2 a litter is best
Thanks a lot now clear 😅
What of one making use of pko oil,is it same measurements
One of the best oils for soap making, pko makes ur soap to lather well even without adding sulphonic acid
Pls can i use olive oil or coconut oil in place of the palm oil?
Any oil can be used but for commercial purposes olive is rather expensive, if u can pay your hands on palm kennel oil or beef tallow, it will be preferable
How long do you cure before using it
A week is best
What is the measurement for the sulphonic acid
1/4 liter
Please where can i learn how to make it
LAUNDRY BAR SOAP
5 liters of water
1 kg of lye
6 liters of tallow
I/4 of sulphuric acid
Or u can use pk oil or bleached palm oil
@@HelenMboneHow to bleach 5 litters of palm oils
@@SAFIYADANTANISURU you have two ways : chemical way is by using hydrogen peroxide n sulphonic acid on in 1%. ( 10 mls for every one liter of oil) your first put sulphonic acid mix will for about 5minutes before u add you hydrogen peroxide.Let it rest for about 20hours before use. Or u can use firewood put ur oil in the pot n let it cook until u can send a white paper inside n it comes out clear.
Do I heat the oil
@@nonhlanhlazubuko-9254 warn not hot
Please ma where can we buy caustic soda in cameroon
In Douala or in Buea depending on the quantity you u want.I can’t give u a supplier’s contact in Buea if u want.
Thank from Namibia
Wow thank u for stopping by and thanks for watching 😊
From kenya
Good explanation
@@babayao-fd9zr thank you 😊 🙏🏽
Do you have classes
No dear
Is the oil hot and why didn't it separate when you poured in the cold oil
Because I used the semi hot process.That is, my caustic solution was was hot, so it melted the oil
Pls ma'am, how do we no the amount of caustic to use for a particular amount of oil. Pls
Check in the description box
Mam what is lie
@@elestinazulu4445 lye is caustic caustic soda
Thanks for sharing. Madam, did you bleach the palm oil?
Yes I did dear
Ma I'm using 1kg of caustic soda and pko
What's the quantity of water to use in dissolving it and how many liters of the pko .
1liter= 5 liters of water
Oil should be 6liters
❤
Thanks for sharing, God bless you, pls how long will u keep the soap before using or selling, i want u to be my mentor
1 week is good enough n u can start selling / using it. The longer your soap cures, the better and long lasting it becomes.
You have gotten a subscriber from me love. Is your lye soacked for 24hrs please what color did you put in this your oil.
I did semi hot process, so my lye was mix same time n immediately after my bleached palm oil was added in its semi solid state. I did add any color to my oils.
The oil must be hot or cold?
If u mixed your Lye that same moment, then ur oil should be at room temperature or worm not hot.
Sister please don't be offended dear. Can i add all those soda ash, sodium sulphate, kaolin and silicate to this your measurements? Thanks
You can butin moderation especially the kaolin.
Thanks dear
I'm New to soap make
It’s beautiful making ur own laundry soap. U can make it for ur home consumption or for business. It’s a win win, just follow the right measurements
Please l also want to start my own soap business and l need help from you, l know the basic ingredients are caustic soda oil and water but when you're doing it for business what should l add is my problem now
@@bettyabudu4664 for me, I add just my sulphonic Acid or foaming booster, just to enhance the cleaning properties of my soaps and I make a decent profit. But if u want extra profit for soap making u can use fillers like sodium carbonate and is shouldn’t exceed 30%( meaning if u are using 10liters of oil, your sodium carbonate should be 20-30% of sodium carbonate. It helps increase the volume soap and weight.
@HelenMbone thank you very much, you are just God sent l will get back to you if l have more questions
@@HelenMbone can you use vegetable oil and how to bleach palm oil naturally
Thank you ma my god protect you,but what are the use of silicate in laundry soup
It is use to harden your bar soaps so it last longer.
Thanks dear but can i use caolin as filler and how much should i add?
20-25% is enough that’s if u are using 10 liters of oil, 25grams , you can either mix it with oil or u mix it with water( 2.5 liters of water.
I just want to ask will the soap be strong how many days can we keep it
I use mind after a week n it’s ok, it isn’t harsh because of the quantity of oil used for the production
Pls how much did it cost u to produce the soap
Oil 2k
Caustic 1k
Sulphonic 500
Fired wood ( for bleaching the oil)500
Total 4K
Total soap bar 63 sold at 100 each.
6300-4000=2300frs
And wit dis amount of water, wont the soap take longer time to dry
No 5 liters to 1kg of caustic is good, or u use the other method if u r not sure. Check the description box down below
Mam can i use Mustard oil instead of palm oil and soda ash + caustic soda +Sls and how to mix it ?
Caustic 36grams
Water 81grams
Any oil of your choice 200grams
Soda ash 10grams
SLS 10 grams
If you want a bigger batch, u multiply this
Madam what kind of caustic soda use
The one that looks like salt but u can also use the one that comes as flakes
If you are to sell this soap,will you make gain with the high cost of thing. Besides, how much per one? Weldone
I sell one 100frs and I do make a profit. If u notice I don’t use to many chemicals just to cut the cost of production
Madam I wanted know the water use boiling water or not boil
Cold water caustic soda becomes very hot when mixed in water, so u can’t use hot water never .
How many litres of sulphonic acid should be added
Just a 1/4. Meaning measure half liter n use half of that half liter
You didn't give us the measurements at the description
I’m so sorry, I’ll do that now
Can colour be added
Yes but make sure is no tomuch n it the right color so it doesn’t transfer
Ingredients please
Sorry for he late reply, please check the description box for all ingredients and measurements
Sorry for he late reply, please check the description box for all ingredients and measurements
Thanks ❤❤❤
You're welcome 😊and thanks for watch
Bt ma'am, i tot it is originally 1cup to 3cups of water
Pls is it bleach red oil
Yes dear
Hello, you didn't indicate measurement of sulphonic acid.
Please check in the description box 📦 . Sulphonic 1/4 liter
Nice video thanks but whst if i couldn't get frangrace and sulphonic , does it change anything i mean will it turn bad
Nothing will spoil dear, sulphonic is just to boost the cleansing and foaming power, but with just you palm oil or palm kennel oil, your soap will still later well.
Thanks so much how much is one
100 franc CFA
New here ,hop am welcomed?!
Does your soap loss his weight after some day?
No because I didn’t put any fillers , instead m’y soap gets better with time because my water to oil Ratio is well balanced
Is it that fillers mk soap loose weight
@@JanetBanigo with time the soap will string from the little I know, because with time the extra water used will evaporate
Madam I want to know what kind fat you use for soap making
This particular recipe I use 100% bleached palm oil. But I also use Tallow and palm oil for other soaps, but I make sure I add a foam booster like sulphonic acid
Mem we use 1kg of coustic soda how much the water and other incridian use
@@renongrum671 Water:5liters
Caustic Soda-1kg
6liters bleached palm oil
1/4 liter sulphonic acid.(1/2 of half a liter)
For those who don’t have scale:
1 cup of Caustic soda = 4cups of water
Oil 5cups oil.
Now u can multiply this to any quantity you want.
No perfume and color,are those not necessary?
Thank you🙏🏽🙏🏽, those things are optional. You are using it for washing anyways.
Ma'am u didnt give us measurements for sulphonic and d rest
I gave dear, 5 liters of water =1kg of Caustic Soda and 6 liters of oil.
Sulphonic acid is 1/2 of half liters
If I don’t have a scale, one cup of caustic soda - 4 cups of water.
2 cups of Caustic soda equals 3cups of water
I see u adding something which is in a black bottle,what is dat
Sulphonic acid, it is to boast the cleaning power and act as a foam booster
Ma u didn't add fillers yet u mk gain, how?
Yes I do make a profit, with fillers u make extra extra profits
What are fillers
👍
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Sulponic acid no measurements
I Saïd half of half litter ( 1/4 of 1 liter)