Bashing starts at 7:22. Not many options for decent jumps out there that are portable. Closest I found on Amazon was the Ramptech Kicker XL and it was $219 for ABS plastic and wood. Had wheels to move it...so it’s not as portable. I need it to check off several boxes. Portability and air time were top 2. The Mojo sky ramp looks like junk and was $189 without much height to the jump. Go ahead and look. I think this is competitively priced for what it is and the materials used.
I think a lot of people missed Tony's point about the price. They aren't cheap but compared to other things in the hobby, they are not over priced as well. The ramp costs less than a Futaba HPS-A700 servo which puts out 1027 oz inch of torque, which is overkill for a crawler or anything smaller than 1/8th scale. The Associated Blackbox 850R ESC is $100 more than the ramp. A Tamyia semi is several hundred more and most people would use a ramp more than the RC semi. They are a nice ramp and if I wanted to send any of my trucks I would consider getting one.
Did you see my video on this ramp? Suggestion: 1) go buy button-head screws. We were catching our chassis and bumpers on the hex heads of the bolts. 2) flip the metal over so the rough diamond-plate is down. Same reason, it grinds off the chassis. 3) reinforce the top lip of the jump. After hitting it with the X-maxx, it finally bent and folded. We reinforced that top lip.
Thanks for the tips. I did see the video when you won it. I mentioned your son jumping off it and bending it. I just blanked on your channel name in that moment. But I did see the video.
i made a ramp for 25$ out of plywood, a few boards and hinges., it collapses down to 4" thick and has adjustble launch angle. it dont matter how much this one cost, you dont have to buy it if you dont want it lol.
Redbeard Ron that’s always an option! Not everyone is handy. I try to be sometimes, but everything takes me forever because I question if I’m doing it right or if there is a better way. Hence my ramp boards sitting in a pile and my plywood for ramps being turned into a micro crawler course instead of a jump.
@@CCxRChere is link if anyone is interested. issuu.com/hobbytown/docs/ho_issue_2 page 36 of this magazine had a nice write up on how to build the ramp, i changed it up a little and made it to fit my needs. i found this through a big squid article a while back.
Paul Clancy I used bolts to hinge the legs. It makes it adjustable to two positions. Low for more out. Up for more altitude. Also it fits in my short bed pickup with tonneau cover on.
It's got the right idea. Diamond plate not the best surface imo. Will grind metal and plastic off the cars on every jump. (Not to mention the noise). A little wider (Easier to hit at high speed) and a composite top, and it's a winner.
Just ordered this ramp and excited for it to get here for my boys and I. I've also been thinking I'd like it to be wide, so I was considering buying a wide ramp piece(metal or some other material) for when we want to have it wider. I suppose two of them would also work LOL.
Very cool. Mine has held up well. Just don't let them walk on the ramp...that can bend it. :) I replace the bolts that go in the face with round cap head phillips ones so the car under compression wouldn't get marred by the hex heads.
Totally agree with you. Can easily spend that sort of money on decent wheels for a truggy or x-maxx. These ramps aren’t cheap but you certainly get what you pay for. To me it’s a no brainer 👍🏻
Great concept, however a V2 version with a cheaper metal for the ramp w/o the little diamond things that will wear underside of chassis, a foot wider, another center brace and perhaps do away with the RC bash logo cut into the metal to cut down on labor cost. A sticker would suffice. Get the cost down to 150 or so and it would be a winner
Awesome ramp and very reasonable for the design and build quality and materials.May I suggest you try out Tbone racing rc basher bumpers they really work great and make them for the front and rear of most poular bashers.
I could se a lot of plastic from a-arms and bumpers getting shaved off of the bolts and knurled surface of the jump. I would place the top upside-down and counter sunk screws would also be nice.
Looks pretty cool! I’ve got one of those plastic bike ramps, paid like $5 at goodwill so it’s good enough for me. I don’t really like breaking stuff so I’m not much into going crazy, though I’ve got a stampede that I built from a bunch of parts and is mostly rpm parts so I have been wanting to take it to the skate park and see just how good those rpm parts really are because the only rpm part I’ve ever broken is a rustler front bumper.
nice man i have the same issue on my outcast a guy on ebay sells typhon 6s shocks set of 4 for 75$ im get those and two more rpm a's for the rear i think that will solve that issue of the shock mount
Where do you get those Kryptonics curved ramps from? Can't find them anywhere. Those Aluminum ones are noisy as heck too, like running off a shopping cart.
I just wish it was little bigger , If it was 36" or even 30" wide I would be all over buying this ramp,Just because I have couple of Xmaxx's and nephews who are not precise at hitting ramps even with a maxx or myself for that matter lol
Just build a nice sweeping 45/ ramp some grip strips cost in Dec 2021 $60 and it is lite and very portable have I have looked for affordable ramps your better off making yourself or paying someone $125 to build it for you.
I understand. I did my research and there isn’t much that would be portable and still offer decent airtime that I could find and the prices were above $150 as well. That’s what got me thinking about other ways I spend my RC money that get used less than my Ramps. They are the most used RC item I have.
What is the plastic ramp in your vid called and where did u purchase it? I might go that route and just drill some 2x4’s into the bottom of the rear to add some height and launch angle
I’ve been looking into ramp options as well. Like u, portability and light weight are the main priority. Not sure why a company has not come out with a full plastic version like the one in your vid that has a 4 foot width and high launch angle like the rc basher one shown
Nice I think I like 2 together they should make little wider , I guess want keep price down I'm same way tony I have all wood laying around to build , instead just doing it I over think it and I'm no carpenter lol
I have the landwave ramps it cost like $110 on Amazon and it’s over 4’ wide works good for the xMaxx. What are the dimensions on this ramp? Looks like it would be a good one to keep in my truck
I ordered one one of these back in August and STILL have not received it and now they dont even reply to emails. i would not order one of these unless you want to loose your money.
Lol amplitude 🤣 💀 ⚰ good video my man... I don't mind paying a price for things but this ramp is kinda too high in price man most I'd pay for that is 125-150 but it's awesome bro I got a set of ten eighty ramps for 50 from dicks sporting goods... Grwat bash man 🔥 🔥 🔥 keep being great bro 👌
Thanks Brock. I'll keep trying to pump out videos. Curious about what's funny with the use of amplitude? The amount of times I say it or the use of the word? If you watch X-games, moto-x, snowboarding, skateboarding...that's how they measure the height. Like measuring a wavelength, the amplitude is the distance from rest to crest...so the highest peak. I haven't see the ten eighty ramps that cheap unless they are the micro ones we use for our Clodbusters.
For 275 it's not bad but considering the materials and everything $200 would be a price I'd order in a heartbeat I just built my own eventually as it's easier But this does seem like one of the better cheaper ones
Thanks for creating and sharing video!
Bashing starts at 7:22. Not many options for decent jumps out there that are portable. Closest I found on Amazon was the Ramptech Kicker XL and it was $219 for ABS plastic and wood. Had wheels to move it...so it’s not as portable. I need it to check off several boxes. Portability and air time were top 2. The Mojo sky ramp looks like junk and was $189 without much height to the jump. Go ahead and look. I think this is competitively priced for what it is and the materials used.
I think a lot of people missed Tony's point about the price. They aren't cheap but compared to other things in the hobby, they are not over priced as well. The ramp costs less than a Futaba HPS-A700 servo which puts out 1027 oz inch of torque, which is overkill for a crawler or anything smaller than 1/8th scale. The Associated Blackbox 850R ESC is $100 more than the ramp. A Tamyia semi is several hundred more and most people would use a ramp more than the RC semi.
They are a nice ramp and if I wanted to send any of my trucks I would consider getting one.
True people spend a lot of money in different places within the hobby
Did you see my video on this ramp?
Suggestion:
1) go buy button-head screws. We were catching our chassis and bumpers on the hex heads of the bolts.
2) flip the metal over so the rough diamond-plate is down. Same reason, it grinds off the chassis.
3) reinforce the top lip of the jump. After hitting it with the X-maxx, it finally bent and folded. We reinforced that top lip.
Thanks for the tips. I did see the video when you won it. I mentioned your son jumping off it and bending it. I just blanked on your channel name in that moment. But I did see the video.
Do you have Pictures of how you reinforced it?
It’s cool I want one soon
i made a ramp for 25$ out of plywood, a few boards and hinges., it collapses down to 4" thick and has adjustble launch angle. it dont matter how much this one cost, you dont have to buy it if you dont want it lol.
Redbeard Ron that’s always an option! Not everyone is handy. I try to be sometimes, but everything takes me forever because I question if I’m doing it right or if there is a better way. Hence my ramp boards sitting in a pile and my plywood for ramps being turned into a micro crawler course instead of a jump.
@@CCxRChere is link if anyone is interested. issuu.com/hobbytown/docs/ho_issue_2 page 36 of this magazine had a nice write up on how to build the ramp, i changed it up a little and made it to fit my needs. i found this through a big squid article a while back.
Agreed. I built my adjustable ramp for $200 less than what this one cost. Here’s how ruclips.net/video/fFQnFEaE51U/видео.html
That's good idea hinges , I have idea drilling holes using pins to adjust height and to be portable
Paul Clancy I used bolts to hinge the legs. It makes it adjustable to two positions. Low for more out. Up for more altitude. Also it fits in my short bed pickup with tonneau cover on.
It's got the right idea. Diamond plate not the best surface imo. Will grind metal and plastic off the cars on every jump. (Not to mention the noise). A little wider (Easier to hit at high speed) and a composite top, and it's a winner.
Hi, Beautiful Video. Thanks friend. Thumb up😍😍😍😍
Amassing jump
Just ordered this ramp and excited for it to get here for my boys and I. I've also been thinking I'd like it to be wide, so I was considering buying a wide ramp piece(metal or some other material) for when we want to have it wider. I suppose two of them would also work LOL.
Very cool. Mine has held up well. Just don't let them walk on the ramp...that can bend it. :) I replace the bolts that go in the face with round cap head phillips ones so the car under compression wouldn't get marred by the hex heads.
Very cool ramp love the jumps 👍👍🔥🔥😎😎😎
I really like it. Looks good. Definitely made with quality and it sends it
Totally agree with you. Can easily spend that sort of money on decent wheels for a truggy or x-maxx. These ramps aren’t cheap but you certainly get what you pay for. To me it’s a no brainer 👍🏻
Sweet ramp. Looks like the top pitch is perfect to flick it. I might have to look into one of those.👍👍😎😎✌✌
Nice
great video, continue in the same spirit, greetings from Russia 🇷 🇺 👍 🔥🔥🔥🔥🔥
Guess they are back in stock after your video so I hooked myself up with this bad boy !
good Jump RAMP BASH Yo.!!!
Great concept, however a V2 version with a cheaper metal for the ramp w/o the little diamond things that will wear underside of chassis, a foot wider, another center brace and perhaps do away with the RC bash logo cut into the metal to cut down on labor cost. A sticker would suffice. Get the cost down to 150 or so and it would be a winner
Sweet ramp for sure. Tough break on the shock mount though. ✌
Yeah. I have to get that fixed ASAP. I Love running this truck.
CCxRC shocks for that kraton are on backorder till end of May or so...
Like #15 sweet ramp 👍🏽
Thank you. Subscribed
Very cool ! But you may need to stiffen up your shocks on the higher ramp cause it sounded like it was bottoming out ??
You should put this metal ramp on the send it ramp!
Tony you could get a second basher ramp and put the 2 ramps side by side so it can be easier to jump the raminator
Nice ramp I have a set of the big plastic ones
It’s got a good angle on it but it’s narrow as hell! It needs to be wider
You have to have good aim
Awesome ramp and very reasonable for the design and build quality and materials.May I suggest you try out Tbone racing rc basher bumpers they really work great and make them for the front and rear of most poular bashers.
Looks great but nothing in stock (2022); wonder if they're still in business?
I have the same ramp but I haven’t taken it out the box 📦 lol great video bro 🏎💨💯
I could se a lot of plastic from a-arms and bumpers getting shaved off of the bolts and knurled surface of the jump. I would place the top upside-down and counter sunk screws would also be nice.
That is a possibility. I think I do more damage landing on the concrete though. 😂 I’ll keep an eye on the parts.
CCxRC Yeah, you're probably right. I'm impressed it survived the backflip to lawn dart😂👍🏻
Looks pretty cool! I’ve got one of those plastic bike ramps, paid like $5 at goodwill so it’s good enough for me. I don’t really like breaking stuff so I’m not much into going crazy, though I’ve got a stampede that I built from a bunch of parts and is mostly rpm parts so I have been wanting to take it to the skate park and see just how good those rpm parts really are because the only rpm part I’ve ever broken is a rustler front bumper.
What did that rc bash ramp cost ???
nice man i have the same issue on my outcast a guy on ebay sells typhon 6s shocks set of 4 for 75$ im get those and two more rpm a's for the rear i think that will solve that issue of the shock mount
Where do you get those Kryptonics curved ramps from?
Can't find them anywhere.
Those Aluminum ones are noisy as heck too, like running off a shopping cart.
You brake and I beak in the same day
Niiiice, we have a wood one @Shogun7 RC built... Good stuff 💪🏾💯🚀🔥
I just wish it was little bigger , If it was 36" or even 30" wide I would be all over buying this ramp,Just because I have couple of Xmaxx's and nephews who are not precise at hitting ramps even with a maxx or myself for that matter lol
Just build a nice sweeping 45/ ramp some grip strips cost in Dec 2021 $60 and it is lite and very portable have I have looked for affordable ramps your better off making yourself or paying someone $125 to build it for you.
Cool
If only they were back in stock!!! How’s a 6s rig off one of those. Might go with tbone.
6s is too big for it.
Im not cheap at all, but $150 sounds like the top I would spend on that👍
I understand. I did my research and there isn’t much that would be portable and still offer decent airtime that I could find and the prices were above $150 as well. That’s what got me thinking about other ways I spend my RC money that get used less than my Ramps. They are the most used RC item I have.
What state do you live in? Your area looks beautiful
What is the plastic ramp in your vid called and where did u purchase it? I might go that route and just drill some 2x4’s into the bottom of the rear to add some height and launch angle
Hi! How high and how long ang how wide it is I like the way you jump...
A little Glow Fuel or rubbing alchol on a rag will get that tape goo off .
Wonder how these ramps will hold up against the Outcast 8S or XMaxx. I'm seeing that they move when contract is made with the Kraton.
👍👍
I’ve been looking into ramp options as well. Like u, portability and light weight are the main priority. Not sure why a company has not come out with a full plastic version like the one in your vid that has a 4 foot width and high launch angle like the rc basher one shown
HALLO... FROM INDONESIA
Nice I think I like 2 together they should make little wider , I guess want keep price down I'm same way tony I have all wood laying around to build , instead just doing it I over think it and I'm no carpenter lol
Use acetone to get the goop off
Where can I buy this ramp?
Hey Tony, how has the ramp held up? Can’t seem to buy one always sold..lol
It held awesome. I recently sold it because I made the monster truck ramps. I don’t think he makes the any more
@@CCxRC tThank You for letting me know 👍🏻
Price aside it just isn't wide enough. If they came out with a 1/8 scale version with one more section in the center that would interest me.
I would like a wider version as well!
Hi! We talk before. Can you send me the information on that Orange ramp can't found it how to Order it
WD40 and a rag will take off the tape goo.
Do you have a link to the plastic ramp I only own a Traxxas Rustler it's more than adequate for that.
I have the landwave ramps it cost like $110 on Amazon and it’s over 4’ wide works good for the xMaxx. What are the dimensions on this ramp? Looks like it would be a good one to keep in my truck
looks like these ramp makers are shut down
I have the revo 2.0 and the xmax making one would b allot cheaper was looking at one today I'm good good videos thou wish I had a crawler one day
It’s nice but they don’t make them anymore
Where do you get the plastic ramps do you want to sell any
Would love to buy 2 but they are out of stock
I see that. Are you trying to get the colored sides? It looks like the bare aluminum version is available.
I ordered one one of these back in August and STILL have not received it and now they dont even reply to emails. i would not order one of these unless you want to loose your money.
Can I ask you what you have broken on the Kraton 4s so far besides the arms because I’m thinking about getting one
I just broke the shock end on this video.
CCxRC how much have you broken in total on camera and off camera and how hard were you bashing? Thanks for replying so soon though👍
Which angle has the ramp on the highest point?
Sold out?
Yeah. I’m not sure he makes them any more
is it wide enough for an xmaxx?
Can I purchase your RC bash ramp?
Lol amplitude 🤣 💀 ⚰ good video my man... I don't mind paying a price for things but this ramp is kinda too high in price man most I'd pay for that is 125-150 but it's awesome bro I got a set of ten eighty ramps for 50 from dicks sporting goods... Grwat bash man 🔥 🔥 🔥 keep being great bro 👌
Thanks Brock. I'll keep trying to pump out videos. Curious about what's funny with the use of amplitude? The amount of times I say it or the use of the word? If you watch X-games, moto-x, snowboarding, skateboarding...that's how they measure the height. Like measuring a wavelength, the amplitude is the distance from rest to crest...so the highest peak. I haven't see the ten eighty ramps that cheap unless they are the micro ones we use for our Clodbusters.
@@CCxRC ik the definition bro just how many times you said it lol... Enjoy your content homie 🍻
@@silly_d_williams2167 haha. I get fixated. :)
$220 US not cheap
So I checked out their website.... they SUCK! Everything on the site is out of stock, and doesn't even show prices.
These ramps are too narrow.
$273 ???? ya...no thanks
I’ll pay like $50 but almost $300 is crazy 😂
For 275 it's not bad but considering the materials and everything $200 would be a price I'd order in a heartbeat I just built my own eventually as it's easier But this does seem like one of the better cheaper ones
Cool