Funny thing, When I was a small young lad... Somewhere in the 70's wad cutters were all, I had for plinking, pestling... Hunting with pellet guns were not a thing back then for me... not enough power... For a humane kill... Thanks for bring back good memories of my youth... Big C out... 😎
Thanks BigC glad you enjoyed it. I honestly love a wadcutter. Have you been watching Nibs' wadcutter challenge/shootout? You should check it out at walnut and steel which is his channel
Yes, I have... looks like it is going to be a total sweep... MEISTERKUGELN, all the way... one of the reasons I bought them to try... Also, as soon as I'm done with my 2240 build, I'm going to be looking into a Diana Chaser .177 cause of watching your channel...Then may a Beeman QB78 in. .177 wish I would have found your channel sooner... Have a happy holiday's... Big C out...😎@@African-Budget-Pellet-Gunner
I did a wadcutter shootout video it started off pretty intense but kind of fizzled towards the end but I definitely found some interesting results during that whole series
Hi Alex, long time no chat hope you're keeping well. Glad you enjoyed the comparison, I have tried the gamo match and they aren't bad at all. I do think the H&N are a little better quality and a similar price too
Hey man 🤙🏽 I once used 8.1g wcs with an old B1 with a slight power tune and the cheapest Riflescope 4x20. 80% headshots on sparrows (to feed the cats) all day long. 10 to 18m distances. Gun was shooting slow but smooth and true and the impact trauma due to surface area and weight of the pellet was awesome. Felt like shooting an ugly Hw30 lol have fun!!!
@@African-Budget-Pellet-Gunner Haha yeah. If you the Budget Airgunner then I'm the Broke Airgunner. Just use whatever I can get my hands on and make that sh@t work.
I'm not sure if they still make them but the Gamo Magnum Energy (yellow banner) are the perfect balance between impact and penetration at short distances. Well designed pellet for the job, they just hit different.
Before I got a chrony...I shot into phone books for power estimates and possible effects on varmints.. I found Crosman domes to do the best job and the CPHP hollow points as well...as always, very informative and helpful 👍 have a great day Tyrone!
That's interesting and not what I would expect. The other day I put a Crosman Destroyer against an RWS pointed alloy. The destroyer mangled the water bottle a lot more. On a seperate test I couldn't find differences in penetration. But on the water bottle test they both made pass-throughs.
Yes, the wadcutter really does well to dump it's energy but it does have it's limitations in terms of range, I wouldn't stretch it much further than 20m
@@African-Budget-Pellet-Gunner thanks! I'm hunting mice with an air rifle that's right on the edge of acceptable power so I'm trying to figure out which pellet is the best. I keep going back & forth on domed vs destroyer. I may have to do a meat target to make the final decision.
Wadcutters surr can give a bit of an advantage to allow less pass through near buildings but it doesn't seem to make as big of a difference as most people think 🤔 6:47 _😬😬😬_
B.c in diablo is better so best for longer distances with heavier pellets. Wadcutters dump more energy in shorter distances due to surface area of its head but lose speed much faster over longer distances due to b.c
Nice! You can try hn terminator expansion in low power gun and maybe hn baracuda hunter extreme and hn crow magnum whitch is best in low/normal/high powered airguns?
I have been shooting my alligator a lot and probably will have a vid in the near future. I want to get some proper broad heads for it but those are quite pricey around $30 in South Africa and that is just for 3 bolts🙈
@@African-Budget-Pellet-Gunner we can’t buy them they are forbidden. If i buy them at wish or aliexpress they will be confiscated at the border and i will get a big fine.
I usually shoot at the end of the out breath. I have heard similar things but I think you really need to be on very high magnification to be able to see that
I am actually a fitter and machinist by trade but currently work as an account manager for a german company which has just been bought out by a Danish company in the mining sector
Спорт
Daisy wad-cutters at close range or devastating they have almost like a hollow-point just under the wad cutter
I will need to perhaps try some of those
@@African-Budget-Pellet-Gunner super cheap and fairly accurate at close range devastating mushroom effect you got to check it out
And are surprisingly accurate for the very low cost!
Funny thing, When I was a small young lad... Somewhere in the 70's wad cutters were all, I had for plinking, pestling... Hunting with pellet guns were not a thing back then for me... not enough power... For a humane kill... Thanks for bring back good memories of my youth... Big C out... 😎
Thanks BigC glad you enjoyed it. I honestly love a wadcutter. Have you been watching Nibs' wadcutter challenge/shootout? You should check it out at walnut and steel which is his channel
Yes, I have... looks like it is going to be a total sweep... MEISTERKUGELN, all the way... one of the reasons I bought them to try... Also, as soon as I'm done with my 2240 build, I'm going to be looking into a Diana Chaser .177 cause of watching your channel...Then may a Beeman QB78 in. .177 wish I would have found your channel sooner... Have a happy holiday's... Big C out...😎@@African-Budget-Pellet-Gunner
I did a wadcutter shootout video it started off pretty intense but kind of fizzled towards the end but I definitely found some interesting results during that whole series
What you again 🍕 boy ? Lol
@@timmy4539 yesterday Timmy Timmy Timmy it's me again I'm on the ball
I think relax bad knees adventures beat all of you
@@African-Budget-Pellet-Gunner 😜😝😛👍
Thanks. Really interesting comparison. Really well done.
Hi Alex, long time no chat hope you're keeping well. Glad you enjoyed the comparison, I have tried the gamo match and they aren't bad at all. I do think the H&N are a little better quality and a similar price too
Hey man 🤙🏽 I once used 8.1g wcs with an old B1 with a slight power tune and the cheapest Riflescope 4x20. 80% headshots on sparrows (to feed the cats) all day long. 10 to 18m distances. Gun was shooting slow but smooth and true and the impact trauma due to surface area and weight of the pellet was awesome. Felt like shooting an ugly Hw30 lol have fun!!!
Sounds like you and I are on the same page. Those wadcutters definitely hit hard
@@African-Budget-Pellet-Gunner Haha yeah. If you the Budget Airgunner then I'm the Broke Airgunner. Just use whatever I can get my hands on and make that sh@t work.
I'm not sure if they still make them but the Gamo Magnum Energy (yellow banner) are the perfect balance between impact and penetration at short distances. Well designed pellet for the job, they just hit different.
Sounds familiar welcome to the group my friend
@@African-Budget-Pellet-Gunner Thanks dude, been subscribed for a while and to Oh Shoot just probably more of a fly by night lol. Keep shooting 💪🏽
Very nice testing with very good information. Thanks Tyrone. 😌👊
Glad you enjoyed it and even better if it was useful
Fun experiment! I have a video in editing shooting my 25 caliber pcp at water cans
I used h&n crow magnums and the energy dump was substantial
With this testing, the sound doesn't come across Clearly on the video but you can hear the thump of the wadcutters is more substantial
@Walnut and Steel I love the destruction those things do on high pressure spray foam cans...😊
Great stuff, well worth watching👍
Thanks Robert glad you enjoyed it, I think it is something most of us consider everytime we buy pellets
Very nice testing🔥
Thanks Maleek glad you enjoyed it
Before I got a chrony...I shot into phone books for power estimates and possible effects on varmints.. I found Crosman domes to do the best job and the CPHP hollow points as well...as always, very informative and helpful 👍 have a great day Tyrone!
Hi Jerry Thanks, I see yourself and Mark have moved onto the longer ranges @ 50yrds
@Tyrone Mclaren we gave it a try!! 😅. I'm just glad we had a good non windy day to shoot!! Have a blessed evening Buddy!!
Same there Jerry, keep well
@@African-Budget-Pellet-Gunner You Too my Friend!✌👊💪🔫
For wadcutters I have been using the Gamo Pro Match. Pretty decent accuracy and a budget price.
I find the Gamo a trifle light for my CP2. A target pistol pellet but travel a little too fast and over the optimum
One definitely needs to find what works best in your barrel. The wadcutters though definitely prefer the lower end of the speed range
That's interesting and not what I would expect.
The other day I put a Crosman Destroyer against an RWS pointed alloy.
The destroyer mangled the water bottle a lot more.
On a seperate test I couldn't find differences in penetration. But on the water bottle test they both made pass-throughs.
Yes, the wadcutter really does well to dump it's energy but it does have it's limitations in terms of range, I wouldn't stretch it much further than 20m
@@African-Budget-Pellet-Gunner thanks!
I'm hunting mice with an air rifle that's right on the edge of acceptable power so I'm trying to figure out which pellet is the best.
I keep going back & forth on domed vs destroyer.
I may have to do a meat target to make the final decision.
😉👍
Thanks glad you enjoyed it
Wadcutters surr can give a bit of an advantage to allow less pass through near buildings but it doesn't seem to make as big of a difference as most people think 🤔
6:47 _😬😬😬_
When they hit they do give more of a thump but due to the low speeds it won't have significant expansion but definitely more than a dome
Hi Tyrone what fps is your cp2 shooting.
Currently I only have the 5mm spacer in the hammer on this CP2 and it is around 525-535fps in .22
Thanks.
Hope it helps, keep well Phil
how better de bc is ,how less powerdump in the target and more penetration you get
@peteralexben sorry not sure I understand your comment
B.c in diablo is better so best for longer distances with heavier pellets. Wadcutters dump more energy in shorter distances due to surface area of its head but lose speed much faster over longer distances due to b.c
Wcs are like hollow points with much less b.c by design but the design also means it is already expanded, if I'm making sense 😜
Nice! You can try hn terminator expansion in low power gun and maybe hn baracuda hunter extreme and hn crow magnum whitch is best in low/normal/high powered airguns?
I will give them a go, Thanks
Thanks im already interested.
@wiliamdrakeelitedangerous4699 watch this space
Hi, where both pellets similar grains. Is that your modified CP2.💪
Hi @Keith Duffield yes 13.7gr and 14gr so pretty similar. This CP2 only has 5mm hammer spacer installed and polished hammer and trigger
How can i come in contact with you ? I have a question about Artemis PR900. // Alan , Sweden
@Allan Malmberg you can contact me at tyrone8511@gmail.com
Good morning bro
Good morning
@@African-Budget-Pellet-Gunner and working on a alligator video?
I have been shooting my alligator a lot and probably will have a vid in the near future. I want to get some proper broad heads for it but those are quite pricey around $30 in South Africa and that is just for 3 bolts🙈
@@African-Budget-Pellet-Gunner we can’t buy them they are forbidden. If i buy them at wish or aliexpress they will be confiscated at the border and i will get a big fine.
But i can shoot a big bore airgun no problem haha crazy law
Are you a breathing in or out breathe out kind of guy on your shot Tyrone? I've even heard snipers shoot between heartbeats.
I usually shoot at the end of the out breath. I have heard similar things but I think you really need to be on very high magnification to be able to see that
@@African-Budget-Pellet-Gunner Thanks that makes a lot of sense as usual, what line of work are, were you in Tyrone?
I am actually a fitter and machinist by trade but currently work as an account manager for a german company which has just been bought out by a Danish company in the mining sector
@@African-Budget-Pellet-Gunner Brilliant, fascinating information the weather is nice and sunny here in the UK for a change
We are heading into winter here so starting to get a little colder weather
Try flipping a wad cutter backwards, skirt in front, they still fly amazingly stable and turn into one heck of a hollow point.
I will need to give it a go, Thanks for the idea