Fix EHO Error Electrolux Zanussi Dryer Easy Repair
HTML-код
- Опубликовано: 25 авг 2024
- Fix EHO Error Electrolux Dryer Easy Repair. A step by step repair guide on how to fix eho error on Electrolux or AEG Dryers. If you are getting EH0 Fault on your clothes dryer this diy instructional video will help guide you in repairing your clothes dryer and get it working again. The repair in this guide will reset Electrolux EHO error.
Previously I watched a video saying I needed to clean the dust and fluff off the pcb but there was nothing to clean off. However, I followed this video and I did find bad solder joints on the relay as this video predicted. I re soldered those joints and it FIXED IT !! Brilliant. Do take lots of photos before unplugging all the connectors.
awesome glad you were able to fix it. should be good for a long time.
This error code has been driving me nuts! Followed your steps and found the loose solders on the PCB board! Soldered them now it works perfectly, saved me a few grand, also replaced the locking mechanism on the washer! Good as new!
Thanks mate
Thanks mate, I have very little electrical knowledge but thought I’d give it a go anyway and now dryer working as normal. Legend status you!!
I used this Electrolux Flexcare Condenser 7kg for 4 years. 9 months ago it’s belt broke an repair costed US$150 equivalent, in Hong Kong. 4 days ago the error code EHO appeared and the machine just won’t start. I searched on RUclips and came across this video and didn’t believe it and my wife ordered a new machine yet to be delivered in 2 days. Preparing for the arrival of the new one, I removed the broken one from above the washer, and got the pc board out. It was perfect and no flaw in the soldering. Since it was to be replaced, there is no harm trying to do anything to it. So I added new solder onto the solder points of this particular relay. I found my low lead solder having difficulty mixing with the original solder at first. That means the original solder could have been of the industrial grade, high lead, high melting point to last a long time. Well the soldering eventually mixed the 2 kinds solder together. The different plugs of cables returned to their proper sockets. And I plug in the power cable and turn the machine on. Woh! The machine worked. Thank you so much. Now I am not going to throw the old machine away. 😅 And I need to find a place to store the new machine. 😢
Same problem with my Electrolux dryer. Followed every step of your video...and now it works fine. Was easier than i expected. So, huge thank you for this perfectly clear video. So helpful. French guy in Spain.
Awesome glad it’s helped you
I just finished fixing my machine, thanks to you it was so easy, it was faulty exactly in those same 2 contacts - i suspect it might have to do with the vibrations of the machine. thanks for saving me a lot of time and a repair that would have cost me a $120 US at least, as technician rates go round here. i wish i could do for you more than just hit the Like button.
Welcome. I’m glad you fixed it. Your like helps the channel a lot
I did this repair on Zanussi Lindo 300. Worked a treat as the internal parts were the same. Never soldered in my life before. Bought a solder iron and gave it a go. I redid every solder on the circuit board and now my tumble drier works perfectly. Just shows you…… give it a go, save yourself lots of money! Spent £16 instead of £600! Thankyou so much.
Bloody legend mate has been doing my head in for months. Was the exact same problem as a cold joint on the relay. A bit of solder later works as brand new. Absolute legend thanks again 👍👍
Welcome mate I’m glad it’s helped ya
Mate, many thanks for this video.
The board actually looked fine to my untrained eye but I topped up solder on a few joins around the relay and PRESTO, we're back in town with a working dryer.
Appreciate the time and effort you made to produce an excellent tutorial!
Hi mate welcome I’m so glad you fixed it. Good on ya.
It is very rare I comment on RUclips but you deserve 1 subscribe from me for excellent and detail job. Follow exactly what you did and it works perfectly.
You saved me $270 with a two minute solder job, Thank you.
Thank you. I rapaired my machine with this video.
Thank you so much!! You just helped me save a few hundreds dollar from replacing the mainboard. It makes perfect sense to look for cold joints as the relay kept turning the motor on/off for so many years till the joints deteriorated. The machine is working perfectly now!! Thanks a million!!!
You are welcome!Glad I could help
Was abit optimistic if this would work or not as the soldering looked fine, but it's worked and saved me several hundred pounds in buying a new tumble dryer.
Thanks 👍
I just did the same repair on my AEG dryer and saved $500. Thanks for the upload
Welcome mate glad it worked out for ya
Thanks for this, really helpful, having EH0 problem with similar Electrolux dryer. Will open it up and take a look now after watching this.
Adding to the thanks here. Same issue with my dryer, reflowed the 6 pins under that same relay and boom, no more EH0. Youre a hero 👏
I can't thank you as much as I want through the web. YOU ROCKS ! Works perfectly for me
Welcome your Joy is all the thanks I need
Just did this repair myself, the solder pads around the relay were noticeably cracked as were a couple others. 1 min to solder up and the dryer is running again, Thanks!
Great work glad you were able to fix it
Thanks, woke up today to find out my dryer went eh0. Looking for this error I found your tutorial. There were two bad solder points. Fixed these and it's running again!
Welcome so glad you could fix it
Thanks, there where cold solders and cracks in them on my machine. Looks like it is all working now. Super good video.
Thank you very much from California! You just showed how to simply take this dryer apart. I am a technician of over 20 years and truly admire your skills!
You're AWESOME. 👍😁👍
Thanks so much for taking the time to make the video. The solder was cracked on the same pads as it was in your video. The macro zoom on my phone really helped spot the issue on the board.
Amazing! I followed the steps you mentioned, repaired the soldering and it just worked! Thank you for sharing the knoweldge.
Thank you so much, you are my hero! I was able to fix my Zanussi dryer. much appreciated.
Thanks you so much for sharing. Had the same issue and now the dryer works again. Saved money and help saving the environment
Thank you so much! We have just repaired my beloved dryer from 2014!
Thank you very much!!!
At start I didn’t saw any cold solder, but from a closer look, you can see a ring inside the soldering.
So I just re-resoldered all of the relays, and it just works like new.
Excellent video, works perfectly.
Mine is branded as AEG, but of course it’s the same.
Hello, this error diplayed everytime you pressed start button ? Or a few minutes or cycles later ? I have this problem since a few weeks and driving me crazy too.
Awesome so glad it worked out for ya
Hi mate if it does that you need to resolver that loose connection yes
Much obliged for this tutorial!
Thanks to you I have successfully repaired my dryer. Now I hope I can delay the purchase of a new one a few more years.
Thanks for sharing. Had the same issue and now the dryer works again!!
Awesome glad it worked out for you
Absolute legend..!! This has been driving me mad.
Welcome should be good for a long time now
Thanks so much for a useful video. It was the same issue with my dryer, causing intermittent the EH0 error. Dry/cracked solder joints on the back of the relays. Thankfully I had just enough knowledge and the right tools to fix this in about half an hour.
Thank you very much. I follow every steps and the problem has gone. I don't have to paid 300 $ to replace controller board. Good job !!!.
Awesome video guide, thanks for it. I have fixed my drayer according video and now is working 👍👍👍
Awesome glad it’s helped
It works. Thanks for the detailed instructions.
You're welcome!
Muchísimas gracias! Ha desaparecido el error EHO He seguido cada paso y funciona a la perfección.
Amazing!!!!! thank you so much!!! it was easier than i thought it would be. much love from israel!
Welcome.
How is this easy bin yamen?? 🤣
@@mohdhendra81 very. it's the knowledge bestowed by mr. washy washy that was the part i needed.
I already knew about these dry joints on this relay. No other relays are affected though, although the one right next to the black relay has a habit of burning out. Contacts melt and burst through the casing at the black relay side.
It's worth checking for any deformation/rippling on that white relay case.
Merci, grâce à toi j'ai pu réparer mon sèche-linge.
Welcome glad it helped
Thanks for the video 👍regards from Poland!
My pleasure! Glad you got some value from it
You legend !😃 Just what i was looking for! I had a feeling my dryer didnt have huge failure to it, when it started it workt for a few minutes before showing power failure alarm. The maskine is a AEG but i saw in your video that they were much alike.
Short story even shorter, you just saved me a good amount of money, but most important for me i learned somthing new! Thank you so much !😃
m
Many thanks for this video, it helped me fix my dryer, very exellent tutorial!
Thank you very much for your video. It really works!
You're welcome! Glad it helped
This is the only video you need to se to fix your dryer
I found the exact same cold solders for the black Omron relay in my Electrolux tumble dryer. Resoldered and so far it has been working. Doubt if I would have turned in a 10 year machine for service. Hopefully it will run a few years more.. Thanks for the video!
Welcome glad it helped
Thank you very much. Followed your instructions and fixed it. You're a legend
Awesome glad you fixed it
Awesome glad you fixed it
Awesome glad you fixed it
Thanks 🙏🏻 Saved me alot of money 🙏🏻
Thanks for such a detailed tutorial. It worked for me
Glad it helped
Thank you so much for posting this. You saved me a lot of hassle! worked perfectly
Dang, thanks so much for this. Like the other comments, same issue with cold joints, and a bit of solder fixed it all up. What is this - planned obsolescence? Manufacturing defect? In any case, happening outside of warranty this was about to cost me a pretty penny.
Thank you soo much! Clear explanation! If you can solder it a bit, its easy to repair.
Worked for my electrolux edc2086gdw eho error. Legend, thank you
Welcome glad it worked out for you
Legend!! Thank you so much! Worked like a charm. You’re the man!
Na 6 jaar hetzelfde probleem en inderdaad bij mij waren ook de soldeerpunten rondom het OMRON relais slecht/gebroken. Oude tin met tinzuiger verwijderd, en opnieuw gesoldeerd (met tin en ouderwets lood). Een aantal ander twijfelachtige verbindingen heb ik ook opnieuw gesoldeerd (en steeds de oude tin eerst verwijderd). Alles weer in elkaar gezet en de EH0 melding was weg. Bij het losmaken van alle stekkers is het me alleen niet gelukt om de stekker met de 3 roze draden los te krijgen, stekker is me afgebroken. Hierop de contrastekker van de printplaat verwijderd, en 3 losse draden op de print gesoldeerd en (helaas) met kroonsteentje later de verbinding met de 3 roze draden gemaakt.
Muchas Gracias !! Perfecto!! Mi máquina fallaba justo en las mismas soldaduras.
Iz works for AEG dryer. Thx!!!
2023 another viewer successfully fix the dryer after watching this video.
2024 here also
@@ronellanda61 2024 the dryer still working fine.
great movie thxs
This was exactly the fault with our AEG. Failed after 4 years but in warranty so the board was replaced. Started playing up then failed this morning. Different board layout but both contacts on the Omron relay had fractured. Quick re-solder with leaded solder and its now working fine. Thanks
Value for resistor R58 PLEASE
Terima kasih mr washy..akhirnya boleh guna seperti biasa
Welcome glad it helped
Thanks!
Thank you sir, just save few hundreds. Same problem with my dryer.
Damn but that was easy and as mentioned in other posts the same two dry joints. This problem has been driving me nuts for a over a year so thanks a million. Mine is a Zanussi dryer but only the names change to protect the guilty. They're all the same inside.
Awesome I’m so glad you fixed it. Yes Zanussi electrolux the same
thank you, I had exactly the same error and thanks to your nice viedo, I have now solved the error 👍🥇
I have just done as per Washy's video and it has solved the EHO intermitent problem that had been driving me crazy for weeks.
A toast for you. Cheers...!
Thank you very much, fonctionning now. I don't know, why. I changed thermostat hs, it's again cold.
muchas gracias máquina un abrazo
welcome welcome
It works! Thank you.
Mine is Zanussi lindo 300, pretty much the same.
Madre mía si hay que desmontarla prácticamente toda😮si mi marido me hace eso ya la puedo tirar ,por qué no sabremos volver a montarla 😅
I followed the instructions in the video. It turns out that the malfunction can also appear due to a faulty capacitor. Replacing it solved the same problem for me
thank you for the tips..
Thank you, it works!
It's worked for me. Thanks
Thanks
Thank you so much
The relay pin solder joints on my board looked OK. Soldered them anyway however and bingo away it goes, How goods RUclips!
❤❤❤ thanks
thankyou mate saved me hundreds
With so many people having the exact same problem its almost like planned obsolescence, they design it to break after a certain number of hours... Although I got no idea how you can engineer a solder joint to do that at a exact time
Great stuff, does it also apply to Simpson eziset 6.0kg washing machines?
I easy fixed this error thaks this video. Unfortuntely I noticed that tensioner roller is broken. I need your help, do you know what is the easiest way to replace it? Is it enough to unscrew the gray housing on the right to remove the rolle ?
Awsome video! Helped me with my dryer too!!
Awesome glad it helped out
Awesome glad it helped out
Awesome glad it helped out
Awesome glad it helped out
Where can I get the relay to fix the EHO error on my zanussi lindo dryer
I have a problem with a similar dryer. After about 30 minutes the dryer stops and stops working. The cooling fan does not turn on. I did a service test. error code ed3 appeared. both sensors respond to temperature changes, which can be seen with an ohmmeter. During the test, the fan turns on, but unfortunately it does not turn on when the device is running. What may be the problem?
It's work! Thank you so so much ❤
Thanks it works .
Well-done
I'm finding it hard to see a difference between the problematic solders and regulars ones. What do you look for to identify if they have gone bad?
God bless, for ur work
Hello from masters from Russia)
Hi. Thank you for your support
Hi. Thank you for your support
Hi. Thank you for your support
Hi - I couldnt find out which one is the relay - My washing machine model is Electrolux TimeCare inverter technology 2018
Hi this is for the dryers. I haven’t done one on a washing machine yet
🎉🎉🎉🎉 tqvm sir u r life saver
Any tricks for loosening those extra difficult connectors that just don't want to come out?
use spanner
Our Electrolux ht33f8120 does not give EH0 error right away, it works for a while and then it comes.
I soldered some points at circuit board and after that it worked two times without error but when we tried it the third time it did not even show anything at the screen. Waited for a while without electricity -> didn't help, took of some connectors+without electricity+waited for a while -> works again. Strange.
Mine has the same problem. I called the service and got the sensor changed. Sadly after 3000 kr it still won´t work so I decided to get a new one instead. We aren´t that handy.
Gracias ati salve mi electrolux ❤❤❤❤❤❤❤❤
Hi there. I not speak English well. I would like ask you a question. My dryer is very warm into the drum and burn my clothes. What is happening. Do yo know how repair it.
Thanks firstly
Sorry, mi model to dryer is aeg lavatherm
Hi, thanks for the video! mine is working for t hours and then shows this error. sometimes after several minutes. i went over the soldering, but it didn't help, unfortunately. I do see that I missed the black relay solderings so I might take it apart and do it again, but is there a difference observation when the error isn't permanent, but comes and goes?
Exacriy the same question:) hope we can get an answer
@@aktugbirinci3361 I actually have an update on this! I took it apart again, and did the soldering on the the black relay as well. And yes ! It works now !
Value for resistor R58. My resistor blow colour code can't see. Please help
Could you do a belt replacement on this same model?
Hi might be doing one soon. Waiting to get another dryer like this
The this work my washing i am getting this code
What is written on the relay? it's hard to see, and I need to buy a new one.
It would be nice to write the reference
Tnx
Thanks, please let me know how much of this you actually received and YT takes as a cut.
I think I get all of it thank you for your support
@@askmrwashywashy A quick google search says YT takes 30% ( which I think is waaay too much)