Product Review - Harbor Freight 61344 Pittsburgh 12 piece Cushion Grip Screwdriver Set
HTML-код
- Опубликовано: 28 авг 2024
- email: 357mdad@gmail.com
Instagram: @357.magdad
DISCLAIMER:
My videos are intended for entertainment purposes only.
I do not recommend repeating anything you see me do in my videos that may be harmful or dangerous.
By viewing or flagging this video you are acknowledging you have read this disclaimer.
Fair Use: In the rare instance I include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with intention of driving commentary and allowing freedom of speech
Fantastic review! I’ve never been a tool snob and appreciate the value of such a set. Great stuff!!!
Thanks ScoutCrafter! I still think I got more than I paid for!
They make a package, ship it to a port, load it on a boat, off load it, put it on a truck, take it to a distribution center, consolidate it into a truck for a particular store, off some boxes onto the loading dock, unpack the box and put them on a shelf. Count them for inventory some times, answer my question about where they are, and check me out. Doesn’t leave much to make the drivers. I’m impressed. Hope you bought a cordless drill while you were there to make up for it.
I agree Eric! My Yankee is my cordless drill!
China makes a lot of products at a loss these days just to boost economic numbers and chop out other Asian manufacturers
Have had one of those sets for several years…not too bad, doesn’t hurt to lose one, great for neighbor borrows, great for small tool kit in my car, cheap way to build a starter kit for kids.
I’m sure a pro using a screwdriver on a Dailey basis needs a good quality driver at all times, but if you’re a DIY’er …not too bad. Loved this video!
I have had this set for over 15 years. I forgot the screw holding screw driver as it died so soon after I got it. They have held up far better than I thought they would. Especially since I have treated them as disposable. Oddly enough I paid the same amount. As I tell people, you know what is worse than a Harbor Freight tool? Not having any tool.
Thanks for the long term review Eric!
Thanks John! They will be a good addition to the communal toolbox at work!
Thanks for the review. I’ve passed these up many times and will continue to do so. This grind of the tip on the largest slotted was awful😂.
Thanks for watching! I still think I got more than I paid for.
@@357magdad 100% agree That’s a lot of drivers for $5. 😉
Well another pleasant mid week surprise from Magdad! I think your review was a good one. For someone who uses tools every day it might not be such a good deal but an occasional user or someone starting out it would be okay I guess. I think the big purchasing factor is the price. Thanks for the mid week video.
Thanks Frank! I think I still got more than I paid for!
I knew you couldn’t resist fixing them. Great review.
I think I spent more time on them than the factory did!
Thanks Magdad, that was a thorough and honest review, I know exactly the smell you're talking about - not pleasant, it's quite amazing just how cheaply they can turn out these tools so we have to be realistic in our expectations I guess, a set of twelve for less than you'd pay for one from Klein, Wera or Wiha ! You have often shown us how cheaply you can pick up vintage screwdrivers at yard sales and flea-markets and although they tend to need restoration these new ones also needed fettling to bring them up to scratch, I'd bet that the steel would be better in the old ones though ! You made me smile with the "Pokey Thing", thanks again for taking the time to test them and share your findings.
Thanks Andy! I'm glad you enjoyed the video!
Have 2 sets of these.
Work well. If I have to lend a screwdriver to someone, I give them one of these, keep my snap on in my box so they don't grow feet.
Thanks John! Mine are headed for a similar situation.
Great review Magdad! I was surprised that the magnetic tips were not all that strong except on the Philips drive ones. Thanks for sharing this as it was a big help.
Thanks John!
Hi Magdad, That Set Has Been Around A Long Time. I Never Really Thought About Buying It Because I Figured It Was Junk. I Had Bought One of Their Other Screwdriver Sets That Was Cheap ( The Six Piece Pittsburgh Black Handled 6pc. Set ) That Is Good For Handles ! So Yours Looks To Be A Better Deal . Especially For the Price. Even With Some Sanding. Good Fair Honest Review! Nice Job 👍
I got the black handle set too! I'm saving them for future tiny lathe projects!
I knew you couldn’t resist tinkering with the screwdriver set to give it that Magdad finish touch. As far as the magnetism goes, that can always be enhanced in the shop, and the biggy for me on drivers is finding handles long enough and with bigger diameter handles to fit my hand comfortably. Liked your review, and I will be getting a set to put with my RV tool kit, I think they would fit the bill nicely. Thanks for the review, enjoyed watching.
Thanks Terry! Let me know what you think of the set!
I’ve purchased some Icon tools from HF as well as some of their Quinn brand and been quite happy. Some of the lower use sockets I have are Pittsburgh, especially the impact ones, and they’ve also held up well. Not everything is a winner at HF but they seem to have upped their game in the last few years.
I buy mostly consumables from HF. I do like their little LED flashlights.
I agree. I started to notice this with the Icon tools. Very nice quality and made in Taiwan.
I agree. I am impressed with the Icon tools. Maybe HF is tired of jokes about Horror Freight and Harbor Fright.
I missed this review, but thanks to Scoutcrafter I am seeing it. I got that set a couple of years ago for either free or a couple bucks. They will do the job for light duty work. I have them on my rolling cart to use mostly for minor disassembly. I wouldn’t try prying anything with them, but they will probably get you out of a bind.
Thanks Paul!
Good review MagDad. Sometimes the cheaper stuff is just the ticket for light use or situations where you don't mind if they 'walk away'. Thanks for the information on this set.
Thanks! I think I got more than I paid for!
Great review and repair. I've always wanted to purchase those, but I just wasn't sure they would hold up. I believe you're taking them to the right place. Thanks Magdad
Thanks Michael! Several viewers have said that they've had this set for years!
I bought one of those probably 30 years ago as a beater set and that is what I still use them for. I have much better screwdrivers now but these still have a purpose and a sacrificial set.
Thanks for watching! Several viewers have commented that this set has held up well over time.
Nice review Magdad. Its hard to believe that they can make 12 of anything and ship it halfway around the world, and sell it for that price and make a profit. I have a Chuck 2024 card that is very magnetic!! 😉 Thank you! 👍🎥
The shipping alone should have been more than $5! Let's go Chuck!
Cheap, and better than nothing, perfect drivers to grind/modify as needed for a specific job or screw type. Like you said, you can always make a poky thing, or even a special pry bar.
I don't have to be scared of ruining these!
I am very happy you bought a large set of screwdrivers. Just the other day I said to my dog, "I am worried about one of my favorite creators. I do not think he has a sufficient quantity of screwdrivers." Maybe you should put screwdrivers on your Christmas wish list. Nice video.
I'm prolly gonna bring more screwdrivers back from Jacktown this weekend! 🙄
That was a very detailed review. Similar to some of my findings regarding a few Harbor Freight products. Sometimes not the best, but most times I can find a place where they would work. At first, I was impressed to see the screw holder driver included. My thought was that alone may be worth the price of the kit. It was a good try. Like you, I do like the hexed shafts. Many thanks for the excellent review, Magdad. 👍
Thanks Joseph! I think I still got more than I paid for!
I'm really enjoying the mid-week videos. The zero tip screwdriver can be used on something s with battery compartments.
Thanks Steve!
If you need junk drawer screwdrivers these ought to fit the bill.
I agree!
Your product reviews and tests are always fair and informative. Thanks.
Thanks Pat!
I have a set of those screwdrivers in my "travel tool box", they will work good in an emergency situation and you have just about every size you might encounter. I keep my "good" screwdrivers above my workbench on a peg board, and that is all they are used for inserting and removing screws, not paint can openers, pry bars etc.
A perfect use for this set Stewart!
I have this set in my clock repair till box. It worked well enough for that....
Thanks Kirt!
Yeah I've been finding the same problem with Harbor Freight a lot of magnetic stuff ain't magnetic but I do buy quite a bit of their stuff I look for the quality if I can find something that is made good enough then I'll buy it I do like that set of screwdriver you got THANK YOU FOR THE VIDEO
Thanks Joe!
@scottmingersoll
0 seconds ago
I got these cheap on a promotion a few years ago and the entire time I’ve owned them they have stayed in my work truck as a quick go to set in the need of an emergency. I took a small old 4x4 block and drilled holes to fit the corresponding drivers to keep them together as a complete set. I’ve broken the large flat head tip probably three times using and abusing it as a chisel or pry bar during certain situations but the lifetime warranty is the cherry on the top with these and all of Harbor Freights hand tools.
Thanks for the long term review Scott!
The midweek videos are a nice addition.
Tune in this Wednesday to see what followed me home from Jacktown!
Zero Phillips is a definite for a lot of modern electronic type repairs. Breaking down a tower fan, a shredder head to clear paper jams.
The set has just about every size you would ever need.
For the price they're hard to beat.
To bad there's not one Robertson in it.
Sets we get 🇨🇦 have at least # 1 and # 2.
Thanks for reviewing ordinary folks kind of things. 👍
Enjoy your channel a lot.
I was at a Harbor Freight grand opening once and they gave me a better set for free. I guess times are tough today.
I don't run into the Robertson screws or screwdrivers much.
@@357magdad Kreg pocket hole screws are square drive. I'm not above using pockets holes occasionally either.
Good set to use flat heads for mixing epoxy and stirring paint and prying stuff like when you don’t want to bugger up you good screwdrivers and that’s pretty much how I use these
That is an ideal use for them!
Thanks for the thorough review. Well done.
Thanks John!
Greetings from Mexico 🇲🇽!
Greetings from New Jersey!
Great review Magdad. I bought that set probably 15 years ago, probably a couple bucks with a coupon back then. As a functioning screwdriver-holic, definitely not a go to, and some have disappeared over the years , but good for the kitchen junk drawer. What’s that smell, haha. I have a friend that has to head to the restroom immediately when entering HF.
Thanks Stan! I'm surprised this set has been around for so long.
I bought one or two of these sets probably 10 years ago. Used them for years and found them to be good. I compared them to the ubiquitous Craftsman sets that I also had and didn't see much difference in performance. Actually, when given a choice I usually picked up one of these screwdrivers.
Thanks for the long term review Jody!
The package said "magnetic tips", but it did not say they were ALL magnetic. LOL
I would have left the 0 Philips alone. I have many small Philips screws which need to be removed or tightened especially in electrical items.
Thanks for the review. I do not know how they can make the set, and ship it to the US for about $5 and someone is making something.
Dave.
I agree. Even with super cheap labor, the shipping alone should be more than $5!
I think I'll stick with my SK and you should have taken that $4 to the Flea Market to buy screwdrivers. 😁. Great review.
I use bit drivers and 6in1 drivers more than anything.
I've never been to a swap meet without seeing a bunch of these in the dollar or 50 cent bins.
If you add it up, I did better than that!
Pokey Thing was a nice touch!!
I had to re-label the package! 😁
This cheap set of screw drivers is best for loaning out and not care if you get them back. I've got the Doyle set the quality is really good with this brand at HF.
They are headed for the communal toolbox at work.
Great review and repair.What was your opinion of the steel?
Thanks Dale! It didn't seem like the steel was super soft when I was re-grinding the tip on the big screwdriver.
I guess they don't have quality control in China...lol..
Good candidates for a lathe project... Show us how many different items you can make with these drivers.. Take care M.D. and God Bless...
Thanks Gary! I might keep a few for tiny lathe projects.
My neighbor had a Craftsman set(?) just like those way back in 1960's. It's an old style,
Only problem then seemed the grip flanges wore off.
I would have preferred solid plastic handles without the smelly rubber.
Even at full price of $5.99, that's 50 cents/each. Reasonable for a secondary set.
I thought it was a good deal!
Tip on the flat blades look like they used a weedeater to put the grind on them.
They are pretty rough Mitch!😂
This set is also ready to be MAGnfied! Some MAGnification already took place, thankfully.
I might keep a couple for tiny lathe projects.
Well that was a different video That screwdriver set is only good for if you are a painter . Tool Loaning or a Suicide screwdriver set personally i would have walk away from that set .. I am a Huge fan of HF tools and their Tool Boxes their Tool Boxes are better quality than the bigger name tool companies at a fraction of the cost .. But HF does sell JUNK too .. I do have to say Great Review and video and i do enjoy your 2 videos a week take care enjoy your day
Thanks Roger! I still think I got more than I paid for!
If 1st screw is stainless steel...SS and magnetism not so great. I've found the tips break easily on those screwdrivers, but hey 5 bucks👍🏻
When the tip breaks that just means you have another pokey thing. But yeah one way to reduce costs is to skip manufacturing steps. You know little things, like tempering tool steel. Or even using the proper grade tool steel. Little savings add up.
The screws I used were steel.
@@357magdad 👍🏻 right on.
Great review, but when you only spend .42 cents a screwdriver you kinda get what you paid for, as you mentioned they have their place. Thanks for the review!
Thanks Bill! I still think I got more than I paid for!
They make ok pry bars in a pinch, but USA made is my choice for tools.
A set you can abuse!
I think a big plus you overlooked was Lifetime Warranty. Just take that $0.40 screwdriver in if it breaks and get another one for free with no hassles. Jim
Thanks Jim. I have no experience with Harbor Freight's warranty policy.
@@357magdad Just think of Craftsman back in the day. Jim
I find the square handles fit better in my hands especially when they are slippery.
I guess the ribbed cushion grips are supposed to help with that...
i’ve never had to buy screwdrivers, still using my dads that are older than me 40 years old at least lol..
I wish I still had my dad's.
If your just going to use them occasionally they'd be ok, and for less than 5 bucks I'd say you did ok.
And my " putty knife-knife is coming along"
The price was right! Make sure you send me some photos of your putty knife knife! 357mdad@gmail.com
Exactly the sort of review video I would expect from you! Still no chuck? He must be shaking a lot of hands and kissing a lot of babies!
Chuck is a busy man making America Shiny Again!
That discolored tip is a bad attempt at a phosphate tip like on more expensive screwdrivers it's not a mistake. The older sets had all coated tips. Thoes rubber hands actually fall of under high torque over time just don't do it. Husky or some other 10 dollar set is a better value in my book. (Oww my hands bleeding)
The tip looks better now!
Nice review, don’t care for Chinese tools.
Thanks Larry!
Not a thing I’d buy tbf, but a good review though. Question: if the drivers were magnetic, why would you need a screw holder driver?😂😂😂
I'm not sure what was a bigger disappointment - the non-magnetic "magnetic" tips or the poorly executed screw holding screwdriver.
I had some screw drivers like that years ago they went to bad same color and everthing
It seems like HF has been selling this set for a while.
They don't make em' like they used too. 🧐 I actually need drivers without rubber or rubberized handles. I am a CNC machinist, coolant and oil practically melts the rubber/rubberized handles.
The cushion rubber grips would not be a good choice for you.
Got to love that horrid smell of a harbor freight now we know where that smell comes from a 😅
The handles would have been better if they were just solid plastic without the stinky rubber.
👍❤🤠...
Thanks Larry!
You can't never have enough screw drivers.
I took some to work for the communal toolbox.
Remember, they are ribbed for comfort.
And stinky!
It's a cheap nickel plating rather than an expensive chrome plating.
Another fake advertising from PRC.
The package doesn't mention the plating. Chrome Vanadium refers to the steel alloy.
To me, they're cheap Chinese junk. You get what you pay for here. Grips not so great, plating defects (btw, I don't think that's a chrome plating, looks more like nickel), grinding defects, highly doubtful they're chrome-vanadium. As soon as you'll put more torque the tips might strip out, get chewed up. I have some Chinese screwdrivers that are also cheap but the quality is much better than these and they have a solid steel striking cap, full tang construction, hexagonal shaft and proper tips. But I suppose that if you have nothing else and you're in a hurry these will do. Tip selection also very limited on these.
I still think I got more than I paid for!
Super cheap loaner screwdrivers.
I agree!
To quote the late, great Nancy Reagan, "Just Say No."
Thanks for watching!
Even Flitz won't help these.....
I did use some Flitz to polish the plastic on the two butt ends.
I'd rather have the $4 something !
TY for the review ! Newk from Kentucky
Thanks for watching Newk!
All you expert screwdriver scientist show me a better set for 5 bucks! I'll wait.
Several viewers who have had this set for years commented that it has held up well.