305°F for colors, 290°F for White, 275°F for Pink 10 seconds Peel Hot Medium, even pressure Cut in reverse Cotton, Uncoated Polyester, Fabric Blends, Polyester/Acrylic, and Similar Fabrics NO NYLON Wash inside-out, cold water, gentle cycle, tumble dry low
Thank you for making this video I’ve been working with this WALAKUT puff vinyl for about a month now and I haven’t perfected it either but watching your video has got me closer to a better product thank you so much
Always pre heat the t-shirt BEFORE applying the ink, especially when in warmer climates. Make sure the t-shirt is 100% free from any moisture. IF the ink is wrinkled afterwards, as seen in this video, place the -shirt with the print back under the press at 320-degrees for 10-12 more seconds as many as up to 2-3 more times between presses to remove all wrinkles.
Thank you so much for this video!! i haven't pressed anything yet, still waiting for my supplies but i've always wondered about the smell with heat pressing. thanks for elaborating on it all! New subscriber!! keep it up!
Thank you for showing the process you're using to figure it out - lots of channels just go "here, look - wow" and don't include information about how they arrived at that "wow" result
Really! It was something about it I just couldn’t get with. But what I will say is that it didn’t hold up in a wash with that texture. So be careful, and thanks for watching!
Great video!! The first time I used puffy vinyl it crinkle up like yours did. And like how it looks but I knew it wasn’t right.. but love this video.. I’ll take you up on your tips and not apply so much pressure.. thank you 😊
Thank you so much for the video. I oddly liked the texture look but maybe it won't last..... I may be wrong.. But could it be the cutting blade leaving little cracks in the vinyl and then the high pressure making it worse? It did get better each time...
👋🏽 Hey Rose, yeah so it looks like they changed the instructions. Take a look at my redo video I just posted the results were way better. Also the wash result video to see how that texture came out. Thanks for watching 🙌🏽
Great video. My puff journey has been trial and error too. Have watched a lot of vidoes, still not there yet. Have used Siser and Econopuff. Have tried the Walapuff. Cutting on the right side is definitely an issue!! 😊
Thanks for watching Sheila! Keep going it can be challenging to find just the right settings. I haven't tried the Siser puff yet. I think I will order some and give it a try! Best of Luck to you on your journey 🙌
@@boutime4655 meant to say I haven't tried the Wala Kut puff. I was getting the same results you got with the crinkled looked. Tried different heat and pressure. My press is like yours with the know adjustment.
Oh I see! Take a look at the newer video I did for the wala Kut I had way better results. They changed the setting instructions on the site from when I first did it.
Good Morning 👋 and great content and helpful information on the Puff HTV. And just a few days ago I cut ✂️ wrong too. But you have awesome channel. I'm a new subscriber to your channel. Have a Very Blessed Day...
Hey! I feel your pain on cutting it on the wrong side 😩 those are the growing pains it seems from all of this! Thanks for watching and subscribing I appreciate it!
I might have missed it when watching the video, what temp, time snd pressure worked the best. Mine came out super wrinkled, I used 320 temp, 12 sec, 22 pressure. And I know I have to make some alterations
👋🏽 The temp was 305, I tried 1 second less than the recommended time with super light pressure. Unfortunately I can’t tell you how light because my press has a manual knob not a digital one. I would suggest you start off light pressure then work your way up. I hope this helps. 🙌🏽Thanks for watching and good luck! Feel free to check out some of my other puff videos that worked a lot better!
@@boutime4655 Thank you! I’ll try this setting out. I have a heat press nation heat press as well, that’s why I asked about the pressure too. I have to turn the knob to adjust the pressure.
I do 10 seconds and 280 pressure because when I first used it im like what is this is this how it suppose to look I do force 8 and speed 18 ..... I do not like this puff won't use it again
I had the same thoughts, is this what it’s supposed to look like. I went around my house asking 😂. I agree this isn’t the puff for me. I was going to try it with a thinner design to see if it makes a difference. I still may since I have a lot of vinyl left over. If I do I’ll make another video to see. Thanks for watching 🙌🏽
305°F for colors, 290°F for White, 275°F for Pink
10 seconds
Peel Hot
Medium, even pressure
Cut in reverse
Cotton, Uncoated Polyester, Fabric Blends, Polyester/Acrylic, and Similar Fabrics NO NYLON
Wash inside-out, cold water, gentle cycle, tumble dry low
Thank you for making this video I’ve been working with this WALAKUT puff vinyl for about a month now and I haven’t perfected it either but watching your video has got me closer to a better product thank you so much
You’re so welcome! I’m glad it helped out, thanks for watching I appreciate it 🙌🏽
Love your honesty and dedication. I’ve been having a hard time with this brand but you just helped out A LOT! Thank you!
Glad I could help😀, thanks for watching!
i find that with puff vinyl shorter press time ( 5-6 sec) @ 300 degrees med pressure
Always pre heat the t-shirt BEFORE applying the ink, especially when in warmer climates. Make sure the t-shirt is 100% free from any moisture. IF the ink is wrinkled afterwards, as seen in this video, place the -shirt with the print back under the press at 320-degrees for 10-12 more seconds as many as up to 2-3 more times between presses to remove all wrinkles.
Thank you so much for this video!! i haven't pressed anything yet, still waiting for my supplies but i've always wondered about the smell with heat pressing. thanks for elaborating on it all! New subscriber!! keep it up!
Thanks for watching and the sub!! Welcome to the wonderful world of heat pressing! If you have any questions feel free to let me know.
Thank you for showing the process you're using to figure it out - lots of channels just go "here, look - wow" and don't include information about how they arrived at that "wow" result
You’re welcome Teri, thanks for your support glad it was helpful!
I admire your patience, I guess I would have slung it out the window 🤩
😂 I know right it was a true struggle! That Econo puff worked out way better though. Thanks for watching!
I love that first texture!!
Really! It was something about it I just couldn’t get with. But what I will say is that it didn’t hold up in a wash with that texture. So be careful, and thanks for watching!
@@boutime4655 okay, thank you ❤️
Great video!! The first time I used puffy vinyl it crinkle up like yours did. And like how it looks but I knew it wasn’t right.. but love this video.. I’ll take you up on your tips and not apply so much pressure.. thank you 😊
Thanks for watching 🙌🏽, I appreciate it. I hope the tips help 👍🏽👍🏽
girl I have been struggling with mine! Thank you for this video.
No problem! Good luck thanks for watching 🙌🏽 give ECONO puff a try it’s wonderful 👍🏽👍🏽
Thank you so much for the video. I oddly liked the texture look but maybe it won't last..... I may be wrong.. But could it be the cutting blade leaving little cracks in the vinyl and then the high pressure making it worse?
It did get better each time...
👋🏽 Hey Rose, yeah so it looks like they changed the instructions. Take a look at my redo video I just posted the results were way better. Also the wash result video to see how that texture came out. Thanks for watching 🙌🏽
This is so frustrating.. im getting the same results I can't dial it in.. I haven't tried to back up on the pressure yet.. so thanx for sharing ..
I feel your pain! I hope this helps in some way. Thanks for watching 🙌🏽
Great video. My puff journey has been trial and error too. Have watched a lot of vidoes, still not there yet. Have used Siser and Econopuff. Have tried the Walapuff. Cutting on the right side is definitely an issue!! 😊
Thanks for watching Sheila! Keep going it can be challenging to find just the right settings. I haven't tried the Siser puff yet. I think I will order some and give it a try! Best of Luck to you on your journey 🙌
@@boutime4655 meant to say I haven't tried the Wala Kut puff. I was getting the same results you got with the crinkled looked. Tried different heat and pressure. My press is like yours with the know adjustment.
Oh I see! Take a look at the newer video I did for the wala Kut I had way better results. They changed the setting instructions on the site from when I first did it.
Good Morning 👋 and great content and helpful information on the Puff HTV. And just a few days ago I cut ✂️ wrong too. But you have awesome channel. I'm a new subscriber to your channel. Have a Very Blessed Day...
Hey! I feel your pain on cutting it on the wrong side 😩 those are the growing pains it seems from all of this! Thanks for watching and subscribing I appreciate it!
This happened to me. You have to only press for like 3-5
I might have missed it when watching the video, what temp, time snd pressure worked the best. Mine came out super wrinkled, I used 320 temp, 12 sec, 22 pressure. And I know I have to make some alterations
👋🏽 The temp was 305, I tried 1 second less than the recommended time with super light pressure. Unfortunately I can’t tell you how light because my press has a manual knob not a digital one. I would suggest you start off light pressure then work your way up. I hope this helps. 🙌🏽Thanks for watching and good luck! Feel free to check out some of my other puff videos that worked a lot better!
@@boutime4655 Thank you! I’ll try this setting out. I have a heat press nation heat press as well, that’s why I asked about the pressure too. I have to turn the knob to adjust the pressure.
No problem at all I really hope it works out for you!
I think your temperature should be 320 - and 10 seconds very light pressure
can this be done in like trucker hats ? even with econovinyl ?
You know what, I haven’t tried on a 🧢 yet. But I will and will make a video on it! Thanks for the idea and for watching 🙌🏽!
what king of ink you using on that puff vinyl?
What do you mean by ink?
Thank you. Very articulate.
🙂 thanks for watching Randy!
Yeah econopuff gave me zero issues. This stuff is CRAAP
I would have to strongly agree! I thought about doing another video with a different design but I don't think it matters. Thanks for watching though!
I do 10 seconds and 280 pressure because when I first used it im like what is this is this how it suppose to look I do force 8 and speed 18 ..... I do not like this puff won't use it again
I had the same thoughts, is this what it’s supposed to look like. I went around my house asking 😂. I agree this isn’t the puff for me. I was going to try it with a thinner design to see if it makes a difference. I still may since I have a lot of vinyl left over. If I do I’ll make another video to see. Thanks for watching 🙌🏽
GREAT INFO STAY MOVING
Thanks for watching! 🙌🏽
Great Review!!
Thank you 😊 and thanks for watching!
Great video
Thanks for watching 🙌🏽
Thank you !
Thanks for watching 🙌🏽🙌🏽
Econopuff is better quality. You won’t have those issues.
I totally agree 💯
Is the econo puff a true black
Can make on trucker hat with custom logo ?
Haven’t tried a 🧢 yet but I will. When I do I’ll post a video! Thanks for watching 🙌🏽
yes you can I just made that video today I will be uploading it later today
thanks queen
You're welcome, thanks for watching!!
TEMP TO HOT
Tfs🥰
You’re welcome ☺️
YOU NEED TO 318 DEGREES FOR 12 SECS MEDIUM PRESSURE
Thanks for watching and the tip!
that transfer paper is jus garbage use a better brand.
I did, check out my other video on Econo puff worked out great! Thanks for watching!