Track Rod Ends Replacement - Ford Transit

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 35

  • @Quicomtb
    @Quicomtb 3 года назад +2

    The best mech info for smileys on youtube! Thanks alot man!

  • @highmilitiagilligilliatt2508
    @highmilitiagilligilliatt2508 3 года назад +2

    Great job mate, I've got a weekend of front end maintenance to do so it's nice to see I'm not the only one, dreading doing the anti roll bar links🤣👍

    • @TurnersWorkshop97
      @TurnersWorkshop97  3 года назад +1

      Thank you 🙏 Haha it’s all good fun, I’ve just got some new drop links as well. Hope it goes well mate 😁

  • @mark-ni5fv
    @mark-ni5fv 2 года назад +1

    Great video 👍🇦🇺🍺 I'm going to replace mine now. 1996 Ford transit m/home owner.

  • @MegaStevie14
    @MegaStevie14 3 года назад +2

    Great job I might have a look at mine as they have been on the van for a little while also it’s worth putting a little copper grease on the threads for future adjustments. Keep up the good work.

    • @TurnersWorkshop97
      @TurnersWorkshop97  3 года назад

      Thanks mate, good tip I should’ve put some on. Oh well, should be good for another 20 years now hopefully🤞🏼😁

  • @kbiggs49
    @kbiggs49 3 года назад +1

    Very good video made it look easy thanks.

    • @TurnersWorkshop97
      @TurnersWorkshop97  3 года назад

      Thank you! It’s not a bad job at all this one 👍🏼

  • @redpig1120
    @redpig1120 2 года назад +1

    Nice van..great video

  • @kieranking8657
    @kieranking8657 3 года назад +1

    another good video, everything well explained you make it look easy👍

  • @WSMDSA
    @WSMDSA 3 года назад +1

    Great video. Well explained. Thanks

  • @cheenso
    @cheenso 3 года назад +1

    Another great video, thanks man!

  • @wayne1243
    @wayne1243 3 года назад +1

    Great job as always 👊👊

  • @emskiholla
    @emskiholla 2 года назад +1

    Great videos

  • @whitevoodooman7276
    @whitevoodooman7276 2 года назад +1

    I think mine has snapped under my drivers side . Would it do much damage if I drove it for a week until being fixed

    • @TurnersWorkshop97
      @TurnersWorkshop97  2 года назад

      I wouldn’t drive it if it’s snapped mate, would be really dodgy if it disconnected as you would loose control of the steering.

  • @tomcali494
    @tomcali494 2 года назад +1

    Hello
    The joint your car how many thousands mile will be need to replace Thank you

    • @TurnersWorkshop97
      @TurnersWorkshop97  2 года назад +1

      I wouldn’t usually change based on mileage alone with the track rod ends, they should be good for many miles. If there is slight play in the joint or the rubber boot is showing signs of wear it should be replaced or if they are making noises this is a good indicator when they should be replaced. You certainly could replace as a preventative maintenance but I’m not sure on the mileage interval.

  • @ste7193
    @ste7193 2 года назад +1

    Hi, do you remember where you got these Moog trackrods from? Cheers.

  • @charleswillard775
    @charleswillard775 2 года назад +1

    Great job. Did you still need to get it tracked?

  • @halimford3564
    @halimford3564 3 года назад +1

    👍🛠☑️

  • @neilspeers5578
    @neilspeers5578 Год назад

    How much were the track rod ends?? I just failed mot on it
    Do I buy 2 4 6 8?

    • @TurnersWorkshop97
      @TurnersWorkshop97  Год назад

      About £15-20 each for good ones. If you go cheap they won’t last as long. I’d recommend some Febi ones perhaps, made in Germany: amzn.to/48vg8AX
      Just check the comparability with your numberplate and you will need 2 👍🏼

    • @neilspeers5578
      @neilspeers5578 Год назад

      @@TurnersWorkshop97 ok thank you.
      Il order 2 then.
      Thank you.
      I'm selling van next month once it passes mot

    • @TurnersWorkshop97
      @TurnersWorkshop97  Год назад

      No worries👍🏼 If it’s just to get through mot then these are cheaper, wont be as good quality amzn.to/46s2kpj

    • @neilspeers5578
      @neilspeers5578 Год назад

      @@TurnersWorkshop97 flip there dearer haha