Thank you for the video! The right tail light of my 2010 Odyssey was somehow filled up with rain water (it seems it is a common problem) and I bet your video will help me a lot. I guess removing the inner bolts will be a little bit challenging :)
thanks for the video! would've been lost without it ! and he was right getting the old lense off was the most difficult. but now my (L) light is brighter then (R) and needs changing too . again many thanks ! I feel a little more independent now !
I tried this on both sides to change the gaskets, and both times, the inner upper bolt broke off the tail light assembly. That leaves 3 bolts and the plastic clip to hold the light in place, which I think will suffice, but it would be better to take off the whole center portion of the tailgate garnish to avoid braking those bolts. Alas, I haven't found instructions for that yet.
Thanks for the video, it helped me replace the back lights on my 2006 Odyssey. I did do mine a little differently though. I found by taking the cover off the inside of the lift gate it made the light replacement much easier. It was easier to access the inner screws, but more importantly allowed access to the bolt and connector that holds down the D panel that the light slides under. By loosening the side of the D panel so it lifted a bit it was much easier to remove and replace the light. Was a little more work to R&R the back cover, but overall made the job easier (without breaking a bolt like ke4roh did). Here is an instruction for removing the inside lift gate cover: ruclips.net/video/9nY1aMVgshs/видео.html#action=share
Thank you for the video! The right tail light of my 2010 Odyssey was somehow filled up with rain water (it seems it is a common problem) and I bet your video will help me a lot. I guess removing the inner bolts will be a little bit challenging :)
Thank you for saving me time and money
thanks for the video! would've been lost without it ! and he was right getting the old lense off was the most difficult. but now my (L) light is brighter then (R) and needs changing too . again many thanks ! I feel a little more independent now !
Thanks for the vid. I got my new one done yesterday on the first try with success!
Was really hoping for you to show us how to remove it, second video ive wasted time watching.
Thanks!
I tried this on both sides to change the gaskets, and both times, the inner upper bolt broke off the tail light assembly. That leaves 3 bolts and the plastic clip to hold the light in place, which I think will suffice, but it would be better to take off the whole center portion of the tailgate garnish to avoid braking those bolts. Alas, I haven't found instructions for that yet.
Can you replace BULPS only?
Thanks for the video, it helped me replace the back lights on my 2006 Odyssey. I did do mine a little differently though. I found by taking the cover off the inside of the lift gate it made the light replacement much easier. It was easier to access the inner screws, but more importantly allowed access to the bolt and connector that holds down the D panel that the light slides under. By loosening the side of the D panel so it lifted a bit it was much easier to remove and replace the light. Was a little more work to R&R the back cover, but overall made the job easier (without breaking a bolt like ke4roh did). Here is an instruction for removing the inside lift gate cover: ruclips.net/video/9nY1aMVgshs/видео.html#action=share
So wrong