Omgggggg I feel like I just learned so much in these short amount of minutes, YOU ARE AWESOME I HAVE WATCHED SO MANY VIDEOS THEY WHERE NOT NEARLY AS GUF AS YOURS! Thank You So Much!
Thanks, Melissa, for the video! I'm relatively new to Silhouette. The family got me the Cameo 4 for my 60th last year and I haven't cut vinyl yet. I would love to do flex on the granddaughters' t-shirts! The tips about the weeding box and cutting bottom left are SO smart!! Thanks again.
Thank you so much Melissa. I love how you teach step by step. I’m too scare to do my first cut. Do you have a tutorial video on the Silhouette on how to make sure the machine cuts all the areas that you want to cut, not just around, for example the Don’t Give Up logo. What do you set up the machine Tu cut in the tiny parts of the letters, I hope you can read this and help me thank you so much 🙏🏼🙏🏼
Thank U!!! I'm a newbie had no clue on how to place the vinyl on the mat thank you so much!!!! Your the only 1 who explains everything w details. I subscribed.
I gave up on this but have come back to see if I can learn this. This one was very helpfully. I do have problems with the computer set up but I hope to find move video you have done to help. Thank you. Dave
I have an idea for Silhouette to upgrade on. Maybe you can help relay this to them. Whenever I work with two machines it takes too many steps to switch from on to the other. They need to make it easier to switch from one to the other. I love your videos and I have learned so much from them. Continue your great work.
THANK YOU so much for this video! I was able to label all of my scrapbooks perfectly and with confidence. Question for you... on the left panel on your machine... how did you do that? :)
Hi there! The free skin can be downloaded here on our sister site So Fontsy sofontsy.com/collections/so-fontsy-design-shop/products/sf-silhouette-cameo-4-skin-template
Hello Melissa! Thanks for making the videos. As a 65 yr old male i am trying to learn how to do the shirt transfers as i go into retirement. I just bought a Silhouette Cameo 4 and a 15 x 15 clam shell digital heat press. I bought the Hobby Lobby smooth white htv. When I use the Silhouette Studio smooth htv settings, it cuts through the htv an actually scores the cutting mat. Can you help? Thanks again.
Usually that is due to the autoblade not being pressed completely into the carriage..which prevents the blade itself from being properly adjusted. Make sure there is no gap in the blade. You can go to the contact page on silhouetteschoolblog.com and send a picture if you 'd like me to confirm
hi great informative video as always! However I was wondering r u able to take that off of the license plate? because I want to do my car but I don't want it permanently stuck
Hey there! You would want to use the square tool and then the transform panel to change the dimensions to the size you'd like. Check out this blog post that shows you where to find that tool: www.silhouetteschoolblog.com/2020/04/how-to-scale-design-in-silhouette.html
Hi Valentina, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
I’ve been watching your vids today trying to figure out how to use my cameo silhouette & how to get it to cut vinyl It’s a lot to take in. I wish I knew someone who does online classes it’s quite challenging so I’ve had enough of it today. I will try again tomorrow Keep posting your vids they are greatly appreciated
I'm not sure I understand your question. If you have scraps you can use them to cut later. If you have already pulled off the vinyl from the vinyl backing, it can't really be re-used.
@@SilhouetteSchool At 4:50 you are putting the vinyl on the sticky mat and using just the bottom square of the red vinyl, after you remove that square on red vinyl what do you do with the rest of the red vinyl that is still on the mat? (approx. 14:00). Hope that makes better sense.
Thank you for making this video for beginners! The auto setting doesn’t seem to be cutting vinyl well for me. What do you recommend for depth, force, and speed settings?
Hi there, you can find tons of information on the blog here: www.silhouetteschoolblog.com/ If you'd like extra help - like in-depth video tutorials or 1:1 help via email or chat for your projects - please consider joining Silhouette U (www.silhouetteu.com). We hope to see you soon!
Hi there! Do you mean like faux leather? If so, check out this blog post: www.silhouetteschoolblog.com/2018/11/best-silhouette-cut-settings-for-faux.html
I’m a total newbie here…assuming there is a quantity button somewhere to cut same image multiple times? Hockey mom and need to print 15 images for a tournament
My transfer paper sticks to the vinyl and makes transfer impossible. I even put it on my shirt so it wouldn't be as sticky but that didn't help. What am I doing wrong?
Hey there! Are you using strong grip transfer tape? Check out my favorite here: www.silhouetteschoolblog.com/2017/02/best-transfer-tape-oracal-vinyl-651.html
I just got mine a few days ago, and I’m curious about the software side under “send” function there’s a “Layer” button. I don’t have it and I don’t know why, I am using it on a Mac.
Hey there! Layers are an option when you upgrade your Silhouette Studio. This blog post has an explanation of the features and which upgrade they come with: www.silhouetteschoolblog.com/2017/07/silhouette-studio-upgrade-features-list.html
@@SilhouetteSchool thank you for you reply, I have another question. If I want to cut through the back of the vinyl on the outer box only, while using the cutting board. Is it possible and what settings do I need to set it too as a starting point?
Hey there! It sounds like you need to look at your blade installation. Check out this blog post: www.silhouetteschoolblog.com/2019/11/silhouette-cameo-4-autoblade-wont-cut-5.html
Hi Melissa. I just bought my Cameo 4 Plus and still am having difficulty linking it to my MacBook Pro. I’m running the new Ventura OS system. I was curious if replacing the Bluetooth usb that’s in the Cameo might resolve this issue of non linking. I believe you are using a Mac as well and was curious if I need to purchase a ‘Mac compatible’ usb bluetooth or would a PC format usb bluetooth device work ? Please help. I’ve had plans to start using this machine for my business but cannot until I can get these 2 machines to communicate with each other…. Thanks for your time. -Dave S.
@@SilhouetteSchool right next to it. Maybe 2 feet max. Again the Bluetooth light on the cameo doesn’t even light up now… When I initially turned it on I was instructed to install new firmware. I did via the usb wire connection. It worked but right after installing, it doesn’t activate/can’t find the Cameo, though it shows below in the ‘choose’ window below. Did you try replacing you usb bluetooth dongle under the machine? Thanks again for your time and assistance Melissa. -DS
I have an Epson XP15000 wide format inkjet printer. I have made a graphic that is 8" x 16" that I want to cut out on the Camio. is this possible? I have looked every where for someone cutting on anything but 9 x 11 or letter size to cut on. You seem to have the most knowledge around using high end equipment like Roland and what not. Any way is this longer vinyl cut possible?
Hi there, we don't HOWEVER, we do have our membership over at Silhouette U that has in-depth video tutorials, 1:1 help via email or chat for your projects - (www.silhouetteu.com). We hope to see you soon!
Hi Melissa, thank you so much since you are an old pro you haven’t forgot us beginners, so thoughtful. I have been playing on a cameo 2 for a year, Santa brought me a cameo 4, so excited until now! My problem is I already had the silhouette app. So I went to setup and register it and thought it updated the app. I turned the app on and than turned on the cameo 4. I had it ready to go to send and there is a problem. IT WILL NOT WORK! Can you figure out what went wrong? Thank you so much Melissa.
Hi June Cuevas, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
Hi @sharitapankey6552, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
As a beginner, after the vinyl is cut….. what should the backing paper look like after your design is transferred to the transfer tape. I’m guessing… if I cut through the backing, then my depth needs to be reduced but in your opinion, what would be a perfect cut or close to perfect cut by inspecting the backing . As a guess, I’m thinking that a good cut would be that the vinyl weeds easily & leaving a slight imprint on the backing paper without piercing through the back paper …. Thank you so much for your videos & you’re an awesome instructor
Hey there! What I like to do is pull a little piece of the design out before I unload my material to make sure it's cut correctly. If it's still loaded, if you need to do another pass you can. I would use that as my gauge versus what the backing paper looks like.
Hi! I’ve been watching your videos and I need help 😢😢😢 my system (Cameo 4) all of a sudden is off track, when it comes on it does not go to the correct place and when I manually move it and try to print the item it prints out but it’s not cutting deep enough or correctly. I’ve changed the force to 14 as you suggested, I’ve tried to reset the system.. nothing is helping 😩 When it does print you can see the cut on the vinyl but it’s not deep enough to peel off. Ive been trying to reach Silhouette but no one has a contact number nor has anyone gotten back with my inquiry I submitted online. So I’m hoping you can help as my last result! Please!
Hi dommique, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@Silhouette School with Melissa Viscount mainly vinyl, the thin font sometimes comes out great and then other times it gets pulled off the sheet a little. I'm not sure how to fix I tryed more force but that seemed to make it worse
I'm sorry I'm not exactly understanding what you mean. It might be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
Hello there! You should not need registration marks turned on for vinyl. Check out this page for first cut tutorials: www.silhouetteschoolblog.com/p/silhouette-cameo-first-cut-and-beginner_14.html
This is why I linked to this tutorial on getting started in Silhouette Studio: www.silhouetteschoolblog.com/2021/08/how-to-use-silhouette-studio-for.html
Hey there! It really depends on the image that you're bringing into Studio. A PNG file needs to be traced to get cut lines. Here I used a SVG. Check out this blog post: www.silhouetteschoolblog.com/2023/04/what-is-best-file-type-for-silhouette.html
The way this Silhouette machine was about to be thrown out the window 🤣🤣
😂😂😂😂😂😂😂😂😂😂😂
Mine too
This comment killed me 😂😂😂😂
@@chantedewaal3295 Chile...it was, I was like, "ut unnnnn, get somebody else to do it" 🤣🤣🤣
Thought it was just me lol x
Your video was so helpful! You don’t know how many people failed to explain the small details you included. Very helpful!
I have had my machine for 6 months, brought it out of the box 4 xs this is the 1st video I could watch and understand! thank you, your wnderful!
Glad it helped!
Omgggggg I feel like I just learned so much in these short amount of minutes, YOU ARE AWESOME I HAVE WATCHED SO MANY VIDEOS THEY WHERE NOT NEARLY AS GUF AS YOURS! Thank You So Much!
Happy to help!
Thanks, Melissa, for the video! I'm relatively new to Silhouette. The family got me the Cameo 4 for my 60th last year and I haven't cut vinyl yet. I would love to do flex on the granddaughters' t-shirts! The tips about the weeding box and cutting bottom left are SO smart!! Thanks again.
Glad it was helpful!
Thank you so much Melissa. I love how you teach step by step. I’m too scare to do my first cut. Do you have a tutorial video on the Silhouette on how to make sure the machine cuts all the areas that you want to cut, not just around, for example the Don’t Give Up logo. What do you set up the machine Tu cut in the tiny parts of the letters, I hope you can read this and help me thank you so much 🙏🏼🙏🏼
Loved all the helpful tricks included here. Thanks for publishing such an informative video.
Glad it was helpful!
Ok cutting at the bottom corner is really smart. I would have never thought of that.
I just purchased my first ever Silhouette Cameo 4 and your tips and tricks have helped so much.
Great to hear!
Same here
Thank U!!! I'm a newbie had no clue on how to place the vinyl on the mat thank you so much!!!! Your the only 1 who explains everything w details. I subscribed.
Glad I could help!
I am loving your videos, thanks 😍😍😍🤩🤩🤩😍😍😍🥰🥰🥰
I learned alot in a short amount of time, thanks
I like your style as a teacher, thanks for your knowledge!!
Glad to hear that!
I gave up on this but have come back to see if I can learn this. This one was very helpfully. I do have problems with the computer set up but I hope to find move video you have done to help. Thank you. Dave
Awesome tips!
I have an idea for Silhouette to upgrade on. Maybe you can help relay this to them. Whenever I work with two machines it takes too many steps to switch from on to the other. They need to make it easier to switch from one to the other. I love your videos and I have learned so much from them. Continue your great work.
awesome....! thank you...!
Lmao! I could tell you’re so excited working with your machine. You’re a good teacher.
😊😊😊
Lol she's just excited😁😁😁
THANK YOU so much for this video! I was able to label all of my scrapbooks perfectly and with confidence. Question for you... on the left panel on your machine... how did you do that? :)
Hi there! The free skin can be downloaded here on our sister site So Fontsy sofontsy.com/collections/so-fontsy-design-shop/products/sf-silhouette-cameo-4-skin-template
@@SilhouetteSchool Thanks!! But that pattern, where do I find vinyl (or whatever that is)? I'm really new to the whole vinyl process/creation. :)
Wow this is really helpful. Thank you
Glad it was helpful!
I learned so much
That's great!!
Hello Melissa! Thanks for making the videos. As a 65 yr old male i am trying to learn how to do the shirt transfers as i go into retirement. I just bought a Silhouette Cameo 4 and a 15 x 15 clam shell digital heat press. I bought the Hobby Lobby smooth white htv. When I use the Silhouette Studio smooth htv settings, it cuts through the htv an actually scores the cutting mat. Can you help? Thanks again.
Usually that is due to the autoblade not being pressed completely into the carriage..which prevents the blade itself from being properly adjusted. Make sure there is no gap in the blade. You can go to the contact page on silhouetteschoolblog.com and send a picture if you 'd like me to confirm
my cameo 4 won't recognize carriage 2. can you help?
I wish this included the design process! I am hung up on that part and will have to find another video.
You can find it all here www.silhouetteschoolblog.com/2022/01/silhouette-cameo-4-tutorial-for.html
hi great informative video as always! However I was wondering r u able to take that off of the license plate? because I want to do my car but I don't want it permanently stuck
If you want to be able to remove vinyl, I would use something like Oracal 631
@@SilhouetteSchool ok thk u I appreciate it
How do you cut through bluetooth
Do you have a video on doing 2 colors?
Hi - here is a tutorial www.silhouetteschoolblog.com/2014/05/silhouette-layering-vinyl-tutorial-no.html
On the right side of the computer. How do you get it to say “Tool 1” instead of carriage 1?
I wish there was a video on cutting a square to a specific size.
Hey there! You would want to use the square tool and then the transform panel to change the dimensions to the size you'd like. Check out this blog post that shows you where to find that tool: www.silhouetteschoolblog.com/2020/04/how-to-scale-design-in-silhouette.html
Does this work for dry wall as well?
Hi have you ever tried to cut Safety Warning Hi Vis Reflective Self-Adhesive Tape . Thank you
Hello there! I haven't, I'm sorry!
Great video! Thank you, can you please tell me what brand of transfer paper you are using?
Hey there! Check out this blog post for my favorite! www.silhouetteschoolblog.com/2017/02/best-transfer-tape-oracal-vinyl-651.html
Hi. Why is that my cameo 4 cant cut vinyl without the registration marks
Hi Valentina, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
What are your recommended cut settings for permanent glitter vinyl and brushed metal permanent vinyl?
Hey there, I generally use the defaults as a base.
I’ve been watching your vids today trying to figure out how to use my cameo silhouette & how to get it to cut vinyl It’s a lot to take in. I wish I knew someone who does online classes it’s quite challenging so I’ve had enough of it today. I will try again tomorrow Keep posting your vids they are greatly appreciated
I do :) Come check out SilhouetteU.com. Not only do I offer classes there, but I also offer 1:1 help. silhouetteu.com/pages/silhouette-videos-help
Great video, do you pull the left over pick vinyl off the sticky mat and put the original backing on the pick vinyl to be used again?
I'm not sure I understand your question. If you have scraps you can use them to cut later. If you have already pulled off the vinyl from the vinyl backing, it can't really be re-used.
@@SilhouetteSchool At 4:50 you are putting the vinyl on the sticky mat and using just the bottom square of the red vinyl, after you remove that square on red vinyl what do you do with the rest of the red vinyl that is still on the mat? (approx. 14:00). Hope that makes better sense.
Hi can you plz tell me the settings you used ... vynill...pressure ..pases etc plz new here...
For glossy, adhesive vinyl like Oracal 651 - use the default settings for Vinyl, Glossy but increase the force to 14
What blade is that beside the first blade
Hey there! Check out all the blades in this blog post: www.silhouetteschoolblog.com/2020/09/silhouette-cameo-4-tools-and-blades.html
Thank you for making this video for beginners! The auto setting doesn’t seem to be cutting vinyl well for me. What do you recommend for depth, force, and speed settings?
AsI mentioned, increase the force to 14. Leave the other default settings alone.
Hello Melissa, How are you I new to cameo 4 and would like to ask you a few questions about inventory and warehouses.
Hi there, you can find tons of information on the blog here: www.silhouetteschoolblog.com/
If you'd like extra help - like in-depth video tutorials or 1:1 help via email or chat for your projects - please consider joining Silhouette U (www.silhouetteu.com). We hope to see you soon!
Thanks for the video and freebies! I love the skin decal, too!! 😀🙏
You are so welcome!
I wabt to use my silhouette 4 for cutting vinyl for purses, do you have a tutorial for this.
Hi there! Do you mean like faux leather? If so, check out this blog post: www.silhouetteschoolblog.com/2018/11/best-silhouette-cut-settings-for-faux.html
I’m a total newbie here…assuming there is a quantity button somewhere to cut same image multiple times? Hockey mom and need to print 15 images for a tournament
Hi there you can either repeat the cut 12 times or put 12 copies on your design area to cut at the same time.
New to silhouette cameo 4. What kind of vinyl do you use to put lettering on TSHIRTS using a heat press?
You would want to use heat transfer vinyl. Here is a video: ruclips.net/video/V7q4Ma8026E/видео.html
I’d like to know how you made the thing on the lid of your machine!!
Hey there! sofontsy.com/collections/free-silhouette-templates Check it out here
My transfer paper sticks to the vinyl and makes transfer impossible. I even put it on my shirt so it wouldn't be as sticky but that didn't help. What am I doing wrong?
Hey there! Are you using strong grip transfer tape? Check out my favorite here: www.silhouetteschoolblog.com/2017/02/best-transfer-tape-oracal-vinyl-651.html
Show me a tutorial for cutting through bluetooth without a cable
What material settings you put it at I’m using vinyl adhesive so I wanted to put on the right settings
Hey there, I like the standard settings for matte or gloss (which ever you're using) but up the force to 14.
I just got mine a few days ago, and I’m curious about the software side under “send” function there’s a “Layer” button. I don’t have it and I don’t know why, I am using it on a Mac.
Hey there! Layers are an option when you upgrade your Silhouette Studio. This blog post has an explanation of the features and which upgrade they come with: www.silhouetteschoolblog.com/2017/07/silhouette-studio-upgrade-features-list.html
@@SilhouetteSchool thank you for you reply, I have another question. If I want to cut through the back of the vinyl on the outer box only, while using the cutting board. Is it possible and what settings do I need to set it too as a starting point?
I just opened my Cameo 4 about 2 days ago. I made my first cut on some card-stock and I cut through the entire mat. It’s in pieces. 😬
Hey there! It sounds like you need to look at your blade installation. Check out this blog post: www.silhouetteschoolblog.com/2019/11/silhouette-cameo-4-autoblade-wont-cut-5.html
What transfer tape do you use? I’m using oracle 651 transfer tape I bought in a little 5ft roll and I’m having trouble picking up the vynl.
I like Oracle transfer tape! Check out this blog post: www.silhouetteschoolblog.com/2017/08/vinyl-wontt-stick-transfera-tape.html
Thank you ! Do u lay your sticky vinyl on the sticky mat?
Yes I do!
@@SilhouetteSchool okay thank you. I laid my sticky vinyl just on the mat without removing the top layer of the mat
So i cant use vynl for my hoodies or shirts or sweatpants?
You can definitely use heat transfer vinyl on hoodies, shirts and sweat pants!
I’m so frustrated with my cameo plus every time I do a test cut it always cuts half way on the mat and half way on the vinyl
Usually changing software versions resolves those types of issues.
Hi Melissa. I just bought my Cameo 4 Plus and still am having difficulty linking it to my MacBook Pro. I’m running the new Ventura OS system.
I was curious if replacing the Bluetooth usb that’s in the Cameo might resolve this issue of non linking.
I believe you are using a Mac as well and was curious if I need to purchase a ‘Mac compatible’ usb bluetooth or would a PC format usb bluetooth device work ?
Please help. I’ve had plans to start using this machine for my business but cannot until I can get these 2 machines to communicate with each other….
Thanks for your time.
-Dave S.
How far is it from the computer? I think the Pro has a shorter distance for bluetooth
@@SilhouetteSchool right next to it. Maybe 2 feet max. Again the Bluetooth light on the cameo doesn’t even light up now…
When I initially turned it on I was instructed to install new firmware. I did via the usb wire connection. It worked but right after installing, it doesn’t activate/can’t find the Cameo, though it shows below in the ‘choose’ window below. Did you try replacing you usb bluetooth dongle under the machine? Thanks again for your time and assistance Melissa. -DS
Hello?
What cut settings for 651 vinyl
I use the default settings and increase the force to 14.
What are the cut settings for cutting without. mat?
They are the same.
I have an Epson XP15000 wide format inkjet printer. I have made a graphic that is 8" x 16" that I want to cut out on the Camio. is this possible? I have looked every where for someone cutting on anything but 9 x 11 or letter size to cut on. You seem to have the most knowledge around using high end equipment like Roland and what not. Any way is this longer vinyl cut possible?
Hey there! Absolutely! There is a 12"x24" mat that you can get. Change your media/mat size and you'll be set.
@@SilhouetteSchool Thank you for the quick repose. It was obvious what to do after you gave me the answer. Dumb me. Do you have a patreon page?
Hi there, we don't HOWEVER, we do have our membership over at Silhouette U that has in-depth video tutorials, 1:1 help via email or chat for your projects - (www.silhouetteu.com). We hope to see you soon!
Hi Melissa, thank you so much since you are an old pro you haven’t forgot us beginners, so thoughtful.
I have been playing on a cameo 2 for a year, Santa brought me a cameo 4, so excited until now!
My problem is I already had the silhouette app. So I went to setup and register it and thought it updated the app.
I turned the app on and than turned on the cameo 4. I had it ready to go to send and there is a problem. IT WILL NOT WORK!
Can you figure out what went wrong? Thank you so much Melissa.
Hi June Cuevas, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
What are the cutting settings
The default cut settings for Vinyl, Glossy but up the force to 14
Silhouetteu
Does the software works in Windows 10? I have a Silhouette portrait (older version) does not work anymore. I'm thinking of upgrading to a cameo
Yes the software works. I would suggest updating the software, not the machine first.
@@SilhouetteSchool Thank you! 🤗
I still can't get mine to cut 😢
Hi @sharitapankey6552, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
As a beginner, after the vinyl is cut….. what should the backing paper look like after your design is transferred to the transfer tape. I’m guessing… if I cut through the backing, then my depth needs to be reduced but in your opinion, what would be a perfect cut or close to perfect cut by inspecting the backing . As a guess, I’m thinking that a good cut would be that the vinyl weeds easily & leaving a slight imprint on the backing paper without piercing through the back paper …. Thank you so much for your videos & you’re an awesome instructor
Hey there! What I like to do is pull a little piece of the design out before I unload my material to make sure it's cut correctly. If it's still loaded, if you need to do another pass you can. I would use that as my gauge versus what the backing paper looks like.
Hi! I’ve been watching your videos and I need help 😢😢😢 my system (Cameo 4) all of a sudden is off track, when it comes on it does not go to the correct place and when I manually move it and try to print the item it prints out but it’s not cutting deep enough or correctly. I’ve changed the force to 14 as you suggested, I’ve tried to reset the system.. nothing is helping 😩 When it does print you can see the cut on the vinyl but it’s not deep enough to peel off. Ive been trying to reach Silhouette but no one has a contact number nor has anyone gotten back with my inquiry I submitted online. So I’m hoping you can help as my last result! Please!
Hi dommique, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
Are 2 passes worth it? I always do thin fonts and I feel like 1 pass is better
It really depends on the design and the material you are cutting
@Silhouette School with Melissa Viscount mainly vinyl, the thin font sometimes comes out great and then other times it gets pulled off the sheet a little. I'm not sure how to fix I tryed more force but that seemed to make it worse
Hi Melissa, do you reuse your transfer tape at all?
Not often. You can get away with it if you don't need it to be particularly sticky but I find it's easier to just use what I need for each project.
@@SilhouetteSchool ok. Thank you
How do I download the free silhouette design. I am having a problem.
sofontsy.com/collections/so-fontsy-design-shop/products/beginner-svg-set
Something not right because my cut not going to the vinyl just the top base
I'm sorry I'm not exactly understanding what you mean. It might be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
My silhouette is not registering my vinyls how can I remedy that?
Hello there! You should not need registration marks turned on for vinyl. Check out this page for first cut tutorials: www.silhouetteschoolblog.com/p/silhouette-cameo-first-cut-and-beginner_14.html
@@SilhouetteSchool I got it fix 3 days back I did just that
Everything working fine I am doing designs on a regular it's just this cutter I had to master
WHYYYYyyy
Where’s the sitting?????
I'm sorry I do not understand your question
@@SilhouetteSchool I mean what’s the blade depth ,speed and force
omg i thought mine was broken because of the sounds
Nope, that's normal
5 inches, big? 😅
Здравствуйте! Вы не показали Настройки ножа: силу, вылет…. Это самое важное
Check out the blog for more info! www.silhouetteschoolblog.com/p/silhouette-cameo-first-cut-and-beginner_14.html
Whattttttt?? Totally lost me on the downloading and a beginner has no idea how to size down to 5 inches
This is why I linked to this tutorial on getting started in Silhouette Studio: www.silhouetteschoolblog.com/2021/08/how-to-use-silhouette-studio-for.html
You can’t even import your files on cameo 4 and with your tutorial all it did was cut a square
Hey there! It really depends on the image that you're bringing into Studio. A PNG file needs to be traced to get cut lines. Here I used a SVG. Check out this blog post: www.silhouetteschoolblog.com/2023/04/what-is-best-file-type-for-silhouette.html
You talk way too fast and do not thoroughly explain how the blade is working. Do you want to change a setting to 14 which setting?
You'd want to increase the force to 14.