Very cool and excellent job. The thing I like about the quick jacks though is you can get under the middle of the car. The type of scissor jacks in this video block all that. Still excellent job.
Dont give them any ideas. They still habe not finished the cyberpunk car.....its been going for years and they keep starting new projects instead of finishing that one.
Hello, could we somehow agree on the drawings or more detailed dimensions of the jack, I am looking for some detailed dimensions and I really like your work. Thank you in advance for your reply.
The waight limit is because the material and shape or because of the pumps capability? Or could you just add 2 more pistons to have 2x the lifting capacity
It can be either because of the material, or because of the motor creating the pressure within the pump. Theoretically, with the infinitely strong material, only the motor power would need to increase in order to lift a heavier car.
I make actual lifts for a living and all of them have redundant safty locks because hydraulics fail every day it's just a matter of time before you blow a hose or seal and loose your legs. Good luck! Ps you could of bought one of these used for 600 dollars
needs a seperate lift lock. under engineered for weight load or any safety margin.good copy of existing lifts on market. Have to agree with Trevorjarvis just not safe at all to get under it.
Seems dangerous, especially with the 4 tacks on the reinforcements, i'd never get under that and also that won't hold a lot of cars due to how inflexible it is regarding the support points.
I own a BMW and my wife owns a 300. I needed to make one of these because I’m always working on the cars. It has been helpful and has made everything easier. If you know how to weld you can make anything.
Жаль на русском так и не выпустил видос, в твоей озвучке по-приятнее и более понятно. Ну что, придется сначала смотреть, потом по кадрам раскидывать, чтобы позаимствовать некоторые решения) 2 года собираюсь начать делать свой подъемник)
Are you ever going to get back to making the quatra vetch? Its getting annoying how you are starting and finishing new projects before that one is finished!!
this man could build a woking spaceship and open the videio with "in this video I will show you how you can make this at home"
A
Very interesting. I’m sure this is a great help in your workshop. Always nice not having to lay on the floor to work under a vehicle 👍
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
So Cool! Nice
Very cool and excellent job. The thing I like about the quick jacks though is you can get under the middle of the car. The type of scissor jacks in this video block all that. Still excellent job.
+1
A couple planks of wood would fix that somewhat
I think I would add some cross bars between the two sides so cars would wobble far less when being raised up
That is very cool nicely built
so basically each cillinder has to have a load capacity of 4x the vehicle weight?
it would seem that cylinders need repair as they cant lift 1.5t car,probably needs new sets of seals
@@denimory or maybe the pump isn't strong enough to supply enough oil to lift that weight
You made a car from Cyberpunk, Buggy from GTA, a Gyro from Rust... Have you considered making a vehicle from 7 Days to Die? Like the Motorcycle?
Dont give them any ideas. They still habe not finished the cyberpunk car.....its been going for years and they keep starting new projects instead of finishing that one.
@@DisillusionedMillennial that's what it means doing work from a hobby without a deadline... You work on it, when you feel like it.
I'll knock this up on my day off next week.
Cool stuff
Aware that the commercial version of this runs ~1600$.... complete with Safeties and remote pump?
it will be a bit risky without lock as hydric fluid may leak
Hello, could we somehow agree on the drawings or more detailed dimensions of the jack, I am looking for some detailed dimensions and I really like your work. Thank you in advance for your reply.
What the size of the pistons?
The waight limit is because the material and shape or because of the pumps capability? Or could you just add 2 more pistons to have 2x the lifting capacity
It can be either because of the material, or because of the motor creating the pressure within the pump. Theoretically, with the infinitely strong material, only the motor power would need to increase in order to lift a heavier car.
Imma build this on a car trailer, mobile mechanic❤🤗😊
I make actual lifts for a living and all of them have redundant safty locks because hydraulics fail every day it's just a matter of time before you blow a hose or seal and loose your legs. Good luck! Ps you could of bought one of these used for 600 dollars
$600 ? Where? I'll buy one tomorrow
Where can I buy a hydraulic car scissor lift for $600?
@@cool_breezee Good question, Harbor freight had low or mid lift for 600 of course until I started looking for one.
@@RusThompson You have any idea where i should start searching?
@@cool_breezee Harbour Freight is ready to start selling them again.
If u can build any concept car from scratch that will be grate please
I think it would be cheaper to buy a ready made lift than the cost of the equipment including an engine that failed.
dude this is CRAZY
needs a seperate lift lock. under engineered for weight load or any safety margin.good copy of existing lifts on market. Have to agree with Trevorjarvis just not safe at all to get under it.
They’re gonna die if they get under a car on that thing!
Seems dangerous, especially with the 4 tacks on the reinforcements, i'd never get under that and also that won't hold a lot of cars due to how inflexible it is regarding the support points.
what about safety locks so it doesn't fall on you when yo are under it
This looks very safe 👀
Definitely gonna sample this video but if I were you I’d put some more heat into those welds
Can we have plans for this? Might want to build one and add some things to it.
Diy! If you have welder ...grinder.... workshop.... good vid either way
If you don't have those, you probably don't need a lift right?
I own a BMW and my wife owns a 300. I needed to make one of these because I’m always working on the cars. It has been helpful and has made everything easier. If you know how to weld you can make anything.
Жаль на русском так и не выпустил видос, в твоей озвучке по-приятнее и более понятно. Ну что, придется сначала смотреть, потом по кадрам раскидывать, чтобы позаимствовать некоторые решения) 2 года собираюсь начать делать свой подъемник)
Yall should make a homemade car on the homemade car lift
He's already building a car from cyberpunk 2077
@@shvonkle but not on this lift but maby in another vid
Maybe he built the lift because He needed it for the next quadra Video. You should totally check it out, its so awesome
why christmas music? in july?
Did I just see spot welds holding the bottom of that scissor jack? Oh thank god they were just holding it in place to test.
Man deseves more subs
Why don't you publish some plans and sell them. I'll buy a set for sure.
That got complicated real quick once you got into an engine with hydraulics....lol
J'aime ce système 🇨🇦
Go back to Quebec jesus christ
can in have the plans ?.
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Man that was a lot of work 👍👋🇷🇺
КРУТО!!!!!!!!!!!!!!!!!!!!
hare el mío, muchas gracias
Please we need home made car from scratch
What abot The Qurdra vtech hi made
Let see
Почему на видео Жигули, а речь на английском?))
You couldn't pay me to get under that!
thats super dangerous though
Are you ever going to get back to making the quatra vetch? Its getting annoying how you are starting and finishing new projects before that one is finished!!
You didn't clean your metal, you were welding.
No safety locks......
A crushed cockroach comes to mind....😬
Homemade 😂
Стрёмный какой-то подъёмник🤔
Can you convert this video to inches and feet and pounds?
great attempt at a video but cant stand the choppy generated voice over. rather listen to a real person with an accent than this
Почему русско язычного е
Нету видоса
всё продали , всё для питухов
Annoying music, these videos do not need any music. Make the thing and talk about it, simples.
Second!!!! 😆
homemade?....:)
xi jin ping winnie the pooh
it is immediately clear that the Russian person
Ffs!!!! 😒
You tell us that you made a video to show how to build the lift. But NO partslist or blueprint.
Nope. Don't try that at home kids.
Еееее
Ваз 2111
чем бы дитя не тешилось, абы не плакало!
The guy can make his own lift but can’t voice his own video….. come on bro….. AI voices suck it’s lazy.
Soon as I heard that awful AI narration, voice thumbs down and scrolled away
@MundoJeep
That is very cool nicely built