I would add to your design a plate on the bottom with a lip that would prevent the jack from jumping out from under it because the nature of these Jack's is to travel backyards as you're jacking the car up. Your invention is really useful for doing a ton of work underneath a car because it gets the tires out of the way yet is much safer than removing the tires in case somehow it were to fall. Thanks for posting!
Or you could just jack it up with just the jack and accomplish the same exact thing without having a giant heavy metal bar taking up all kinds of room in the shop
This is true yet you still people using things to roll on to to raise there car up higher to get underneath to work on your logic is a weird one as removing the tires would be common sense to not have the bar yet here we are having to explain to you like a child why you would use it. Guess you have not worked on enough vehicles in your day yet youngster
I didn't even watch the video, saw the first question and had to reply, I do it when I need to, just put on (axle) solid jack stands and let out the clutch slow, you can go thru the gears, brake, carefully because your spinning wheels have a lot of inertia in them. Didn't want you to go thru the garage wall, greenhorn. No question is stupid when still a little wet behind the ears
This is a simple and interesting device, but it is only suitable for cars with a huge ground clearance. Most modern cars are not compatible with it. The device will only work with the back where there is a void. In front, there is the suspension, the engine crankcase, and its protection, there is barely 130 mm clear. In addition, a square pipe for heavy cars needs to be reinforced with scarves from the bottom to ensure sufficient rigidity. Because even in the video you can see how the pipe bends. After 10 lifts, it will take the shape of a hemisphere.
I wouldn’t trust my life with that contraption! A couple of decent ramps, and couple of jack stands for redundancy are more than sufficient and you’ll get more space under the car.
Nice first attempt. But it would be more useful for cars that can't move under own power if the 4 rods were wider, and are inserted into receivers. This way you position it under the car, insert the 4 rods front and aft of tires, and lift. Lower the car elsewhere or when done, pull out 4 rods, remove the assembly and jack.
thats a good idea and well built. i would change piece in middle and make it go in the hole on the jack after removing the lift disc. but over all this is awesome
I would definitely say test it on different weight cars so you know it’s tension strength. This is a great build but I’d like to know it’s weight capacity.
@@gedman9527 . You are right that you should use axle stands but this is a great way to lift the car to put the axle stands in before you get under the car they make hoists that lift the whole car on four arms and they are safe. This would more than likely easily hold more than the jack could lift. If anything it is over engineered. The car probably weighs around 2,000kg which means 500kg per side on the stand, not really much for the size of the steel used.
Thank you for the fantastic video! The advice on just using the jack without the need for a heavy metal bar is extremely practical. It makes the whole process more straightforward and helps save space in the workshop. Your explanation was thorough and very helpful. I appreciate the time and effort you put into creating these videos. Keep up the great work, and I can't wait to see more of your tips and tricks in the future!
Great idea, will be making my own. Will add a couple of threaded stantions like harbour freight to lift rear axle. Maybe insert heavy wall square tubing or solid square bar inside lifting beam for more center strength, weld in with rosette welds. Thanks again!
I DON'T GET IT" IT TAKES UP WORKING SPACE...NOT TO MENTION...HE EDITED OUT THAT HE HAD TO DRIVE THE CAR ON TOP OF THE RODS...ITS VERY UNSAFE ..NOT TO MENTION THATS WHAT A 2 TON JACK" I GOT A 3 TON..I USE FOR MY TAHOE" THEN I PUSH A CAR WHEEL UNDER THE TIRE AND LET IT BACK DOWN ...THEN TO THE OTHER SIDE" THAT SET UP IS GOING NOWHERE" HIS SET UP.... THAT A DEATH TRAP.....☑️
Definitely need to get a lower profile and a better jack with a lower profile jack the round bars will all sit on the ground and I would put a bigger round pipe in the center for the jack. Yes I would Definitely use hevy duty jack stands
@@jlrockafella yeah a wheel chock. Chock the wheels that are on the opposite side of the wheels being lifted. And if you think i misspelled chock then I suggest you get to googling that there mister. Makin sur dat I ain’t mispeled et
Великолепная идея и отличное исполнение! Меня оно навело на мысль для универсализации под разные базы и не только под колеса.. Огромная благодарность и удачных идей в будущем!🤝 Теперь я знаю, что и как сделать в гараж под джип и легковушку!🤝
А как он этот швеллер закатил под два колеса? Только самому наезжать! У меня в Субару за ДВС по центру машины есть жесткий поддомкратник величиной с ладонь. Я 20 лет им пользуюсь. Думаю, что у некоторых а/м тоже есть.
Clever design. Has a few practical and safety draw backs. Keep at it. Work safely. Not exactly sure what work you would use it for. Side access wheel dolleys would be more practical.
1) It will allow you get the car higher off the ground because the jack starts lifting the car at a lower point in the jack's range. 2) It keeps you from damaging the side seam on a unibody chassis trying to lift it. 3) Once you have it at the required height use jack stands or wood cribbing to support it.
What is the brand of that blade, and can it be used on a regular chop saw such as a Rigid 14" chop saw? I like how it doesn't put off a ton of sparks and all the dust that comes from typical chop saw blades.
estaba pensando que trabajo le va realizar al auto.... no veo mucha ventaja en levantarlo así.... tal vez trabajo con el escape o el tanque de la gasolina ( y sería incómodo) ...
Good Idea,...except, I'd recommend "angled" braces be added underneath the Cross-bar to the End Support pieces. Plus add even more braces at the End pieces. Overall,...a great concept on lifting both axles.
Love the idea, so why no just make it jack up both side but make it catch the shock or the axel or some other point that succure enough to lift both side. Your fab work was very impressive. Maybe just change your point of contact. Then you won't have to brive the vehicle over it and you could service everything under the vehicle without to hack up one side at a time!! Just my opinion brother!! Over all tho, great fab work!!
Se o carro mexer pra frente um pouco ele cai, ficou perigoso, se fizer as barras um pouco mais distantes para abracar melhor o pneu e deixar o centro de gravidade um pouco mais baixo vai ficar perfeito! Parabens pela idéia criativa!!!!
Just use subframe mounts as jack points instead? What do you do when it's up in the air? You'd still want something other than a jack to hold it up while you get under the car. A pair of ramps would be even faster to use and easier to store. Nice metal work but not sure what problem it's solving!
The steel car lifting bar looks great. But your Center is not strong Enough! You will lift a couple of times then it will collapse in the center. Please do not risk your own life.
Really impressive tool, I will build one similar myself, but have ideas for modifications to where one could use it for cars as well concerning ground clearances to bottom of vehicle
I see this as a great time saving idea. I've driven vehicles up those cheap stamped sheet metal ramps and i've actually seen one collapse after the vehicle was up on both ramps. This looks well built. There are some things I would do differently but it would have to be made with a few different vehicles in mind. Lifting a vehicle by the tires like this eliminates the suspension sag. For those who point out that it is useless because the tires can't be removed for brake service or it is in the way for an oil change must be working under vehicles without using jack stands. I really hope that is not the case for that is extremely absent minded.🙄 This device allows a person to drive their car onto the rods, apply the parking brake, chock the wheels that are not being lifted, raise both sides of the car at the same time to the required height, install appropriate jack stands to both sides of the car without having to reposition the jack, lower the car onto the jack stands, and then remove the jack and lifting device. You are now uninhibited by the jack and lifting device.
@@peterwiremuormsby9383 Unless the vehicle has a solid axle housing on the front, the jack stands should be placed under the frame rails where they support the vehicle more securely than under a control arm. I'm sure you can find many reasons why you think it's a bad idea and maybe it is a bad idea for you, but maybe it's a great idea for others. Can you not find any possibility where this device could be helpful? Keep in mind that if you built one, you would design it to suit your application.
Not having the tools to build it i would BUY one of those jack systems….brilliant when you need to get under your whole car, just add a couple of jack stands and work in total secure comfort1👍👍👍👍
This is a awesome job you have done here. Just a little suggestion,maybe add a couple tabs on the round bars to front and back to put a ratchet strap on. Maybe on a slight up angle, just a thought.
One question!! What good does this do. You can't change the tire. You can't service the wheels or breakers !! Very nice fab work for sure , just don't get the point!! Other than that, great job!!!
You set the vehicle on jack stands as you should to begin with lol I think this device is intended to lift the vehicle at one rather than using the frame 👍
looks impressive but if you can i would use good quality ramps, i found they work better and safer than anything else i have use except for 12 in blocks with 4x4 on top of them so the blocks dont split,
A fun project and useful for certain applications. I always wondered if someone makes air-rams to mount permanently under a vehicle to lift either of the four wheels for a quick tire change like in the Indy 500 pits? Be nice if you could just hook up to a small compressor, lift either of the 4 off the ground, and it would always be there underneath for when & if you get a flat tire in the dark and/or during shitty weather.
@@Michael-DeltaWolf I’m sure with some mechanical engineering, electrical and metal fab skills one could custom build a system for their vehicle. I have the electronics and metalwork skills, just not the mechanical or hydraulic skills needed.
@@repairfreak I'm not saying it's not a good product it's just is missing something . You know like a the way a real car lift works but a mini version . Like instead of picking up the whole car you could pick up one ends like the front or the back and from the side's to.
Back in the day some British cars were fitted with 4 built in hydraulic jacks that were fed of an electrically driven pump. The driver could just reach down and all 4 wheels were jacked clear of the ground. Google Smiths Jackall
Wouldn't need that often, could just use the jack by itself. That would come in handy for vans with the twin I- Beams though. You can't lift them up dead center in the front.
That would be okay for high ground clearance vehicles. Than put jack stands under the crossbar and remove the jack. Just make sure you welds are very, very, very sound
I’d like to see something similar for raising large tires to install on lugs..I have a truck with 20 in wheels and 35 tires and I’m older now those things are heavy…maybe something exist for that?
something to be built for the jack part itself, so it doesn't slip. can you raise it higher or was that the maximum height ? also, make connections for the jack stands to hold it, so you can make front and back ones. raise the whole car
The reason I Jack the car up and put Jack stands is so I can roll around under the car without having a big long piece of tubing stopping me in my tracks. I honestly can’t think of a reason why this would make anything easier for me. Maybe I’m just slow and haven’t thought deep enough. Nice job making it,and if it works for you that’s all that matters.
One improvement I would do is add some gussets from back of wheel to about 3/4 of the way to the lift point. That would help on the deflection as you lift.
Seems after getting the car in the air this would serve as a solid placement for jack stands. This would eliminate the guessing game most novices would experience when looking for a solid point that doesn't further damage the vehicle. That said, this should be refined into a commercial product. Most of us can't afford a commercial vehicle lift.
This thing gives me anxiety but safety stands can help, also this contraption is for tall vehicles not low clearance ground cars, overall nice time saver!
would be a lot better used with a low clearance jack to bring down the height of it, great for transverse engines where they either have no jack point at the front or its off set due to the engine, g'box layout
No metal prep prior to welding; just saying Nice idea, especially for pre-jacking vehicle prior to installing jack stands on frame so as to work on brakes etc
Cool idea. I like it. He made it because he could. Not everyone has killer welding skills. About the only thing I would have done differently is make it adjustable to work on multiple vehicles. Regardless, it's bitchen!
2024 New invention for cars never made before 👇👇
ruclips.net/video/7zRfMtUs_D4/видео.htmlsi=VkNr9-a4qE7uYoXH
Ideas ok but what about the different clearances on other vehicles, no thanks
Yeah I just love the part where you do not show how you get the Bars Under the tires what's up with that
@@wendellsnowden4902 I personally would drive on it then proceed to change my fluids, starter, rear seal or whatever.
I would add to your design a plate on the bottom with a lip that would prevent the jack from jumping out from under it because the nature of these Jack's is to travel backyards as you're jacking the car up.
Your invention is really useful for doing a ton of work underneath a car because it gets the tires out of the way yet is much safer than removing the tires in case somehow it were to fall.
Thanks for posting!
@@kobiroar4221 I thought the same until realizing this is why the barstock is so long.
Or you could just jack it up with just the jack and accomplish the same exact thing without having a giant heavy metal bar taking up all kinds of room in the shop
Yeah that thing is great until you need to take the wheels off. Not much you do on the front end of a car with the wheels still on.
This is true yet you still people using things to roll on to to raise there car up higher to get underneath to work on your logic is a weird one as removing the tires would be common sense to not have the bar yet here we are having to explain to you like a child why you would use it. Guess you have not worked on enough vehicles in your day yet youngster
It actually would work great when doing suspension work and car needs to be on wheels to torque everything down.
I didn't even watch the video, saw the first question and had to reply, I do it when I need to, just put on (axle) solid jack stands and let out the clutch slow, you can go thru the gears, brake, carefully because your spinning wheels have a lot of inertia in them. Didn't want you to go thru the garage wall, greenhorn. No question is stupid when still a little wet behind the ears
🤣
Nice welding, but maybe there's a reason why these are not commonly sold . Huge risk involved .
Nice, but where was the clip of the car driving up onto the round stock? While it was balanced on the jack, the round bars weren't on the ground.
I 100% agree with you on that...that's a red flag!!
The same way, as when he drove off of it.
@@howtodoitdude1662 Please explain further. I can jump down from places I can't jump onto.
+ou-
This is a simple and interesting device, but it is only suitable for cars with a huge ground clearance. Most modern cars are not compatible with it. The device will only work with the back where there is a void. In front, there is the suspension, the engine crankcase, and its protection, there is barely 130 mm clear.
In addition, a square pipe for heavy cars needs to be reinforced with scarves from the bottom to ensure sufficient rigidity. Because even in the video you can see how the pipe bends. After 10 lifts, it will take the shape of a hemisphere.
I wouldn’t trust my life with that contraption! A couple of decent ramps, and couple of jack stands for redundancy are more than sufficient and you’ll get more space under the car.
Nice first attempt. But it would be more useful for cars that can't move under own power if the 4 rods were wider, and are inserted into receivers. This way you position it under the car, insert the 4 rods front and aft of tires, and lift. Lower the car elsewhere or when done, pull out 4 rods, remove the assembly and jack.
Excellent idea for lifting a car evenly to fit the axle stands.
Very nice welding.
Thank you 🙏
thats a good idea and well built. i would change piece in middle and make it go in the hole on the jack after removing the lift disc. but over all this is awesome
I would definitely say test it on different weight cars so you know it’s tension strength. This is a great build but I’d like to know it’s weight capacity.
Looks dangerous false sense of security , fixed axle stands one at a time safety first
😄😄😁😁
Wow is great thakns for time you are the best 👍🏻
@@gedman9527 .
You are right that you should use axle stands but this is a great way to lift the car to put the axle stands in before you get under the car
they make hoists that lift the whole car on four arms and they are safe.
This would more than likely easily hold more than the jack could lift. If anything it is over engineered.
The car probably weighs around 2,000kg which means 500kg per side on the stand, not really much for the size of the steel used.
Definitely would have to get jackstands under it for support in case the hydraulic jack failed.
or the car decided to roll in any direction
That's very good for vehicle's without a central jacking point, and yes you have to use jack stands.
I need to build one of those for a 3-point hitch to move my project cars around. Great idea! Just add a ratchet strap over each tire.
Thank you for the fantastic video! The advice on just using the jack without the need for a heavy metal bar is extremely practical. It makes the whole process more straightforward and helps save space in the workshop. Your explanation was thorough and very helpful. I appreciate the time and effort you put into creating these videos. Keep up the great work, and I can't wait to see more of your tips and tricks in the future!
This might be good for pick up trucks if you don't have long reach floor jack. Once up, drop on jack stand...
perfect👌. a very good luck for those who's jack up the car at car's subframe to install double jack stands😉.
I love it! I want one! The sad part is I wouldn't be able to pick it up to get it on the jack. Bad back. 😢
Great idea, will be making my own. Will add a couple of threaded stantions like harbour freight to lift rear axle. Maybe insert heavy wall square tubing or solid square bar inside lifting beam for more center strength, weld in with rosette welds. Thanks again!
I DON'T GET IT" IT TAKES UP WORKING SPACE...NOT TO MENTION...HE EDITED OUT THAT HE HAD TO DRIVE THE CAR ON TOP OF THE RODS...ITS VERY UNSAFE ..NOT TO MENTION THATS WHAT A 2 TON JACK" I GOT A 3 TON..I USE FOR MY TAHOE" THEN I PUSH A CAR WHEEL UNDER THE TIRE AND LET IT BACK DOWN ...THEN TO THE OTHER SIDE" THAT SET UP IS GOING NOWHERE" HIS SET UP.... THAT A DEATH TRAP.....☑️
Definitely need to get a lower profile and a better jack with a lower profile jack the round bars will all sit on the ground and I would put a bigger round pipe in the center for the jack. Yes I would Definitely use hevy duty jack stands
Awesome idea. My truck is lifted and it’s a pain in the ass to Jack it up. This is perfect. 👍👍👍👍👍👍👍👍
Those welds at the end rods are impressive!
Simple and it works. Well done.
I can't figure out when you would use this when 2 jackstands would suffice. Of course it is cool to make things I do it all of the time.
I was going to buy air powered since they use this idea to lift buses. This is s good idea of jacking it up to wood cribbing stands
Looks dangerous. The car could roll right off😳
Chock the wheels 😳
😂, wheel chucks ?
@@jlrockafella yeah a wheel chock. Chock the wheels that are on the opposite side of the wheels being lifted. And if you think i misspelled chock then I suggest you get to googling that there mister. Makin sur dat I ain’t mispeled et
The weight of the car keeps the wheels settled between the pipes.
Totally agree. Too dangerous for my taste.
Великолепная идея и отличное исполнение! Меня оно навело на мысль для универсализации под разные базы и не только под колеса.. Огромная благодарность и удачных идей в будущем!🤝
Теперь я знаю, что и как сделать в гараж под джип и легковушку!🤝
А как он этот швеллер закатил под два колеса? Только самому наезжать! У меня в Субару за ДВС по центру машины есть жесткий поддомкратник величиной с ладонь. Я 20 лет им пользуюсь. Думаю, что у некоторых а/м тоже есть.
Clever design. Has a few practical and safety draw backs. Keep at it. Work safely.
Not exactly sure what work you would use it for.
Side access wheel dolleys would be more practical.
Great! Where can I buy one?
Excellent time saver. Great video. Thank you!
Thank you i
That's great!
But how will that help rotate the tires?
Or do a brake job? 😳
Put jack stands under the frame of the car.
1) It will allow you get the car higher off the ground because the jack starts lifting the car at a lower point in the jack's range. 2) It keeps you from damaging the side seam on a unibody chassis trying to lift it. 3) Once you have it at the required height use jack stands or wood cribbing to support it.
Nope it actually makes no sense to me, you can change the oil if the jack is in the way, can't take tires off to rotate or change brakes.
Could use a little more distance between the tire bars.
It's nice, but can you just jack on the center of the subframe to lift the front up?
Useful build to get one end of vehicle up on jack stands.
brilliant video 😎
need more than 2 ton jack 🤔
I only jack up my car when I'm fixing something,so usually have to remove wheel
What is the brand of that blade, and can it be used on a regular chop saw such as a Rigid 14" chop saw?
I like how it doesn't put off a ton of sparks and all the dust that comes from typical chop saw blades.
Had to be a slower speed a d higher torque than a regular miter chop saw.
No u can't chop saws turn away to fast.watch how slow that saw turns.
Mine won't cut that good
That is an evolution saw with an evolution blade.
I have the saw and like it but use diablo blades. Far superior than the evolution blade.
Lol I just ordered a evolution 66t
très pratique lorsque tu veux retirer les roues arrières 😄😄😄
i was thinking what kind of job he Is going to do in the car .... Fuel tank???? i dont see to much advantage.
estaba pensando que trabajo le va realizar al auto.... no veo mucha ventaja en levantarlo así.... tal vez trabajo con el escape o el tanque de la gasolina ( y sería incómodo) ...
Great job , s that wheel under pressure?
Good Idea,...except, I'd recommend "angled" braces be added underneath the Cross-bar to the End Support pieces. Plus add even more braces at the End pieces. Overall,...a great concept on lifting both axles.
Love the idea, so why no just make it jack up both side but make it catch the shock or the axel or some other point that succure enough to lift both side. Your fab work was very impressive. Maybe just change your point of contact. Then you won't have to brive the vehicle over it and you could service everything under the vehicle without to hack up one side at a time!! Just my opinion brother!! Over all tho, great fab work!!
Se o carro mexer pra frente um pouco ele cai, ficou perigoso, se fizer as barras um pouco mais distantes para abracar melhor o pneu e deixar o centro de gravidade um pouco mais baixo vai ficar perfeito! Parabens pela idéia criativa!!!!
Just use subframe mounts as jack points instead? What do you do when it's up in the air? You'd still want something other than a jack to hold it up while you get under the car. A pair of ramps would be even faster to use and easier to store. Nice metal work but not sure what problem it's solving!
Ух ты! Классная идея!
I love it! This is brilliant. Ignore the negative comments.
This would make it easier to place jack-stands. Keep innovating! Nice
better use two jacks, to help balance- but awesome, if it holds
Great idea for uniformity of lift. I also enjoy repairing my own vehicle. Vetri South Africa 🙏🇿🇦🙏
Great. Job. Thanks for Tip I am. Going Make one at My. Welding Shop 🙏🇨🇦
Good idea ... just reinforce the center part it's bending alot..
I saw that too. Wondered if I was alone in that...
Good for getting the whole front up so you know the jackstands will have the same height when you put them under.
Finally a DIY video that is actually run a bead and not do the tack-tack-tack welds.
It's heavy duty
Those tack tack tack welds are mostly editing to make it look that way.
The Fabrication Series did a video about this
I are a welder 2
@@fixitallpaul4847 those tack tack tack welds are just because they cant weld.
The steel car lifting bar looks great.
But your Center is not strong Enough! You will lift a couple of times then it will collapse in the center. Please do not risk your own life.
Really impressive tool, I will build one similar myself, but have ideas for modifications to where one could use it for cars as well concerning ground clearances to bottom of vehicle
I’m retired welder. Love mug welding! Squirty Squirty! Sweet idea!
Looks good but at a certain height it’ll be moving at the base of the jack
I see this as a great time saving idea. I've driven vehicles up those cheap stamped sheet metal ramps and i've actually seen one collapse after the vehicle was up on both ramps. This looks well built. There are some things I would do differently but it would have to be made with a few different vehicles in mind. Lifting a vehicle by the tires like this eliminates the suspension sag. For those who point out that it is useless because the tires can't be removed for brake service or it is in the way for an oil change must be working under vehicles without using jack stands. I really hope that is not the case for that is extremely absent minded.🙄 This device allows a person to drive their car onto the rods, apply the parking brake, chock the wheels that are not being lifted, raise both sides of the car at the same time to the required height, install appropriate jack stands to both sides of the car without having to reposition the jack, lower the car onto the jack stands, and then remove the jack and lifting device. You are now uninhibited by the jack and lifting device.
How you going to get the axle stands under the axle with that thing in the way?
@@peterwiremuormsby9383 Unless the vehicle has a solid axle housing on the front, the jack stands should be placed under the frame rails where they support the vehicle more securely than under a control arm. I'm sure you can find many reasons why you think it's a bad idea and maybe it is a bad idea for you, but maybe it's a great idea for others. Can you not find any possibility where this device could be helpful? Keep in mind that if you built one, you would design it to suit your application.
@@markmccoy8304 sorry m8, it wouldn't be any good to me, l have a 57 Chev.
Not having the tools to build it i would BUY one of those jack systems….brilliant when you need to get under your whole car, just add a couple of jack stands and work in total secure comfort1👍👍👍👍
This is a awesome job you have done here. Just a little suggestion,maybe add a couple tabs on the round bars to front and back to put a ratchet strap on. Maybe on a slight up angle, just a thought.
Great job lad with just add in jack stand and she 100%
Thanks
One question!! What good does this do. You can't change the tire. You can't service the wheels or breakers !! Very nice fab work for sure , just don't get the point!! Other than that, great job!!!
Das ist ja mal richtig geil. 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
What if you have to take the tires off?
You set the vehicle on jack stands as you should to begin with lol I think this device is intended to lift the vehicle at one rather than using the frame 👍
Good work 👍
This is as safe as the old style bumper jacks.
Much more so
Wouldn't get me under it
looks impressive but if you can i would use good quality ramps, i found they work better and safer than anything else i have use except for 12 in blocks with 4x4 on top of them so the blocks dont split,
You left out the part where you had to back the car onto it to use it...
And what are you doing I hope not breaks or anything with the wheels
And that would be a problem ...how?
If you are doing something like the transmission would be great...would make extra clearance...
If you have a live axle rear end, just put the jack under the diff housing.
Good job mate 👍👍👍
A fun project and useful for certain applications. I always wondered if someone makes air-rams to mount permanently under a vehicle to lift either of the four wheels for a quick tire change like in the Indy 500 pits?
Be nice if you could just hook up to a small compressor, lift either of the 4 off the ground, and it would always be there underneath for when & if you get a flat tire in the dark and/or during shitty weather.
No in Indy you can change tires this you can't
@@Michael-DeltaWolf I’m sure with some mechanical engineering, electrical and metal fab skills one could custom build a system for their vehicle. I have the electronics and metalwork skills, just not the mechanical or hydraulic skills needed.
@@repairfreak I'm not saying it's not a good product it's just is missing something . You know like a the way a real car lift works but a mini version . Like instead of picking up the whole car you could pick up one ends like the front or the back and from the side's to.
Back in the day some British cars were fitted with 4 built in hydraulic jacks that were fed of an electrically driven pump. The driver could just reach down and all 4 wheels were jacked clear of the ground. Google Smiths Jackall
I think there was a taxi driver in France that actually did this on his Peugeot 406.
Cool idea, but as a mechanic, i can tell you this will get in the way.
Wouldn't need that often, could just use the jack by itself. That would come in handy for vans with the twin I- Beams though. You can't lift them up dead center in the front.
That would be okay for high ground clearance vehicles. Than put jack stands under the crossbar and remove the jack. Just make sure you welds are very, very, very sound
Well done!
I’d like to see something similar for raising large tires to install on lugs..I have a truck with 20 in wheels and 35 tires and I’m older now those things are heavy…maybe something exist for that?
All you need is a low profile jack and youre golden!
Very cool idea! I believe I’ll make one
For what reason,you have the tool already to lift the car ,it's called a jack.
세계로 진출하는 자랑스런 대한민국 타이어 한국 타이어
Screaming for accident to happen. Don't do that...
That's some high dollar metal
The old saying four Jack stands four tyes changed in one go now thats quick response then may be used cross bar to let it down to be safety wise 👍
something to be built for the jack part itself, so it doesn't slip. can you raise it higher or was that the maximum height ? also, make connections for the jack stands to hold it, so you can make front and back ones. raise the whole car
The reason I Jack the car up and put Jack stands is so I can roll around under the car without having a big long piece of tubing stopping me in my tracks. I honestly can’t think of a reason why this would make anything easier for me. Maybe I’m just slow and haven’t thought deep enough. Nice job making it,and if it works for you that’s all that matters.
One improvement I would do is add some gussets from back of wheel to about 3/4 of the way to the lift point. That would help on the deflection as you lift.
so what happens when u remove one tire or is it just to lift front or rear end in one move?
Seems after getting the car in the air this would serve as a solid placement for jack stands. This would eliminate the guessing game most novices would experience when looking for a solid point that doesn't further damage the vehicle. That said, this should be refined into a commercial product. Most of us can't afford a commercial vehicle lift.
Excellent job
Definately a nice idea
This thing gives me anxiety but safety stands can help, also this contraption is for tall vehicles not low clearance ground cars, overall nice time saver!
This is nothing new you can actually buy them..
But to see an independent man make one brilliant. Make sure you use support (jack stands)👍🏿
Where can you buy them?
I don't know, It looks great but I would rather use the materials to make some car ramps at home...
I was thinking this doesn't seem to have any advantage over ramps but maybe I am missing something.
great work
How do you change the tire+wheel with that?
Great idea. Thanks for sharing that
It can wobble, better to add support cones after jacking up
Really good idea and awesome creating! Nice job! :)
Why tho?
The 2 bars under the tires should be wider to have a better hold to help keep the car from trying to move...
awesome idea !
would be a lot better used with a low clearance jack to bring down the height of it, great for transverse engines where they either have no jack point at the front or its off set due to the engine, g'box layout
Very nice Welds!
No metal prep prior to welding; just saying
Nice idea, especially for pre-jacking vehicle prior to installing jack stands on frame so as to work on brakes etc
Quick and easy ideas to make YT money
Cool idea. I like it. He made it because he could. Not everyone has killer welding skills. About the only thing I would have done differently is make it adjustable to work on multiple vehicles. Regardless, it's bitchen!