like the idea marking up the ply first, cutting it and than just transfering it to your noggings. never done it like that, but makes sense, u dont have to climb up and down to mark up the noggings as well :) will definetaly try it this way
@@ashleydavenport3794 All videos are different mate. Its just cool that you're showing another way of how we do things here in the UK.😎 Have a nice weekend.👍
Nhbc won't accept 4x1 nailed to u/side of diminishing trusses on our site only accept 4x1cut min 12" and cut on pitch of roof to be fixed under every truss where meets diminishing truss
You can’t see it clearly there but it’s a 4x2 cut with the angle of the roof on it! Yeah we used todo it like your saying too! All a load of rubbish 🤣👎
It’s mainly to an edge to work to when fitting the trusses but also it supports the over hanging truss so we don’t have to nog them out ! Cheers for your comment 👌
Nice one! Need to find the centre point of the roof, make sure it’s level from the top of the other trusses, then it just needs to hit the corners on the 2 lower point. Just check with a level or your eye accross the plain of the roof. Bit hard to explain I’ll get a video in abit more detail soon. Check out my other vids I have one about fitting valley trusses. Maybe that will help abit more! Cheers for your comment 👌
wow they go up fast, can i ask, do you know what the red flooring/ceiling is on that job, ive never seen that before, is it protection?, great work btw
ashley davenport should be used on every site. Makes it a lot quicker for us boys to put the roof up and makes it a hell of a lot safer! Even better when you accidentally drop your hammer and don't have to jump down to get it 😂
You boys work well together wish my apprentice had the same mentally. Just out of interest how long does the roof from start to finish take you boys my old legs can't carry me around so fast now 😂
Am I mistaken or are one of guys rocking the Martinez hammer and if so are they any good was thinking of getting one. The videos are great and learnt loads of little tips of you guys.
Honest answer! I don’t like talking on the camera! Haha. Also it’s easy to just put the camera on time lapse in the corner and crack on still. I do wanna do some commentary! Maybe soon 🤣👌
@@ashleydavenport3794 honestly your material is good. I imagine your viewers will be here for tips and tricks (like me), and commentary instead of writing is what learners prefer. Although that said, I find your videos great 👍
![Remble - Colors (ft. Mozzy & Stoneda5th) [Official Music Video]](http://i.ytimg.com/vi/KF-3AU9g9xg/mqdefault.jpg)
like the idea marking up the ply first, cutting it and than just transfering it to your noggings. never done it like that, but makes sense, u dont have to climb up and down to mark up the noggings as well :) will definetaly try it this way
Cheers mate, yeah it’s a good little time saver! Just number your ply up and yours nogs so you know where they all go 👌👌
To get the nogging for the ridge height I just measure the height of the gurder truss then mark that of the bottom chord. 👍
Well done on another great video Ashley.🤩
Cheers mate! Not as good as your roofing one that’s for sure! 👌
@@ashleydavenport3794 All videos are different mate. Its just cool that you're showing another way of how we do things here in the UK.😎 Have a nice weekend.👍
@@thetallcarpenter cheers! Yeah loads of different techniques out there 👌. Cheers pal, you too!
Another good video Ash great idea with the 4x1 lay board
cheers mate! yeah its a good method, better for setting up and saves nogging everything 👌
Great video✅where would we be without paslode nailers
Keep the videos coming lads 👍
cheers pal! i know they are a life saver! haha. will do mate cheers 👍
I would rather hand nail them.
Nice video.. loving the music choice
You been dancing to my videos again pal! 🤣😛
You know it... Little boogey to your time lapses 😂
Nhbc won't accept 4x1 nailed to u/side of diminishing trusses on our site only accept 4x1cut min 12" and cut on pitch of roof to be fixed under every truss where meets diminishing truss
You can’t see it clearly there but it’s a 4x2 cut with the angle of the roof on it! Yeah we used todo it like your saying too! All a load of rubbish 🤣👎
👌
The 4x1 you out Down is that just you guys got a solid fixing to
It’s mainly to an edge to work to when fitting the trusses but also it supports the over hanging truss so we don’t have to nog them out ! Cheers for your comment 👌
Great video, how do you work out the angles for the lay boards? Cheers
Nice one! Need to find the centre point of the roof, make sure it’s level from the top of the other trusses, then it just needs to hit the corners on the 2 lower point. Just check with a level or your eye accross the plain of the roof. Bit hard to explain I’ll get a video in abit more detail soon. Check out my other vids I have one about fitting valley trusses. Maybe that will help abit more! Cheers for your comment 👌
wow they go up fast, can i ask, do you know what the red flooring/ceiling is on that job, ive never seen that before, is it protection?, great work btw
They fly up now don’t they! The red flooring is just a crash deck they are getting used more and more now and they are so much better 👌👌 cheers
ashley davenport should be used on every site. Makes it a lot quicker for us boys to put the roof up and makes it a hell of a lot safer! Even better when you accidentally drop your hammer and don't have to jump down to get it 😂
@@generaljph5256 one major issue! a tape measure and pencil can still fall between the gaps!! hahah
You boys work well together wish my apprentice had the same mentally. Just out of interest how long does the roof from start to finish take you boys my old legs can't carry me around so fast now 😂
Took us just over a day and a half on this one! Cheers mate 👌👌
@@ashleydavenport3794 good going boys keep the videos coming 👍
The dream team
Am I mistaken or are one of guys rocking the Martinez hammer and if so are they any good was thinking of getting one. The videos are great and learnt loads of little tips of you guys.
Yeah that’s one of the lads I work and I think he loves it 👌👌. Nice one mate 💪👍
What qualifications do you need to get to this level working on site?
I’ve got nvq level 3 and the lad I’m working with is in his 2nd year of his apprentiship 👌
why do you not sheet a good part ot the roof first then put your valley lay boards on top ,plus easier to walk around on.
From Canada ,what are noggings?
Why is there no commentary?
Honest answer! I don’t like talking on the camera! Haha. Also it’s easy to just put the camera on time lapse in the corner and crack on still. I do wanna do some commentary! Maybe soon 🤣👌
@@ashleydavenport3794 honestly your material is good. I imagine your viewers will be here for tips and tricks (like me), and commentary instead of writing is what learners prefer. Although that said, I find your videos great 👍
@@scottmorrison5909 cheers mate! I’m sure once I’ve done a few vids with commentary it’ll become easy 🤣😬
Ruined by the background music?
Sorry pal 🤣🥺